NETGEAR-QOS-ACL-MIB
187 objects
The MIB definitions for Quality of Service - ACL Flex package.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| NETGEAR-QOS-MIB | fastPathQOS |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.11.3.2 | IdentityfastPathQOSACL | The MIB definitions for Quality of Service - ACL Flex package. | ||
| 1.3.6.1.4.1.4526.11.3.2.0 | NodeaclNotifications | |||
| 1.3.6.1.4.1.4526.11.3.2.0.1 | NotificationaclTrapRuleLogEvent | current | This trap is generated on a periodic basis to indicate that an ACL rule configured for logging was actively used by hardware to take action on one or more pack… | |
| 1.3.6.1.4.1.4526.11.3.2.1 | TableaclTable | not-accessible | current | A table of ACL instances. |
| 1.3.6.1.4.1.4526.11.3.2.1.1 | RowaclEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.11.3.2.1.1.1 | ColumnaclIndex | not-accessible | current | The IP ACL table index this instance is associated with. |
| 1.3.6.1.4.1.4526.11.3.2.1.1.2 | ColumnaclStatus | read-create | current | Status of this instance. Entries can not be deleted until all rows in the aclIfTable and aclRuleTable with corresponding values of aclIndex have been deleted. … |
| 1.3.6.1.4.1.4526.11.3.2.1.1.3 | ColumnaclName | read-create | current | The name of this IPv4 ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this IPv4 ACL. An existing IPv4 ACL can be renamed… |
| 1.3.6.1.4.1.4526.11.3.2.1.1.4 | ColumnaclResquenceStartRuleNumber | read-write | current | Renumber the sequence numbers of the rule entries for specified IPv4 ACL with the given increment value (aclResequenceIncrement SNMP object) starting from a pa… |
| 1.3.6.1.4.1.4526.11.3.2.1.1.5 | ColumnaclResequenceIncrement | read-write | current | Renumber the sequence numbers of the rule entries for specified IPv4 ACL with the given increment value (aclResequenceIncrement SNMP object) starting from a pa… |
| 1.3.6.1.4.1.4526.11.3.2.1.1.6 | ColumnaclListCounterClear | read-write | current | Clears all counters within a specified IPv4 access list. |
| 1.3.6.1.4.1.4526.11.3.2.4 | TableaclRuleTable | not-accessible | current | A table of IP ACL Rule instances. |
| 1.3.6.1.4.1.4526.11.3.2.4.1 | RowaclRuleEntry | not-accessible | current | A table of IP ACL Classification Rules |
| 1.3.6.1.4.1.4526.11.3.2.4.1.1 | ColumnaclRuleIndex | read-create | current | The index(sequence number) of this rule instance within an IP ACL. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.2 | ColumnaclRuleAction | read-create | current | The type of action this rule should perform. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.3 | ColumnaclRuleProtocol | read-create | current | icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.4 | ColumnaclRuleSrcIpAddress | read-create | current | The Source IP Address used in the ACL Classification. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.5 | ColumnaclRuleSrcIpMask | read-create | current | The Source IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks. Her… |
| 1.3.6.1.4.1.4526.11.3.2.4.1.6 | ColumnaclRuleSrcL4Port | read-create | current | The Source Port Number (Layer 4) used in the ACL Classification. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.7 | ColumnaclRuleSrcL4PortRangeStart | read-create | current | The Source Port Number(Layer 4) range start. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.8 | ColumnaclRuleSrcL4PortRangeEnd | read-create | current | The Source Port Number(Layer 4) range end. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.9 | ColumnaclRuleDestIpAddress | read-create | current | The Destination IP Address used in the ACL Classification. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.10 | ColumnaclRuleDestIpMask | read-create | current | The Destination IP Mask used in the ACL Classification. This mask is expressed using wild-card notation,which is the 1's compliment of traditional Subnet Masks… |
| 1.3.6.1.4.1.4526.11.3.2.4.1.11 | ColumnaclRuleDestL4Port | read-create | current | The Destination Port (Layer 4) used in ACl classification. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.12 | ColumnaclRuleDestL4PortRangeStart | read-create | current | The Destination Port (Layer 4) starting range used in ACL classification. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.13 | ColumnaclRuleDestL4PortRangeEnd | read-create | current | The Destination Port (Layer 4) ending range used in ACL classification. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.14 | ColumnaclRuleIPDSCP | read-create | current | The Differentiated Services Code Point value. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.15 | ColumnaclRuleIpPrecedence | read-create | current | The Type of Service (TOS) IP Precedence value. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.16 | ColumnaclRuleIpTosBits | read-create | current | The Type of Service (TOS) Bits value. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.17 | ColumnaclRuleIpTosMask | read-create | current | The Type of Service (TOS) Mask value. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.18 | ColumnaclRuleStatus | read-create | current | Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete … |
| 1.3.6.1.4.1.4526.11.3.2.4.1.19 | ColumnaclRuleAssignQueueId | read-create | current | Queue identifier to which all inbound packets matching this ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 tr… |
| 1.3.6.1.4.1.4526.11.3.2.4.1.20 | ColumnaclRuleRedirectIntf | read-create | current | A non-zero value indicates the external ifIndex to which all inbound packets matching this ACL rule are directed. A value of zero means packet redirection is n… |
| 1.3.6.1.4.1.4526.11.3.2.4.1.21 | ColumnaclRuleMatchEvery | read-create | current | Flag to indicate that the ACL rule is defined to match on every IP packet, regardless of content. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.22 | ColumnaclRuleMirrorIntf | read-create | current | A non-zero value indicates the external ifIndex to which all inbound packets matching this ACL rule are copied. A value of zero means packet mirroring is not i… |
| 1.3.6.1.4.1.4526.11.3.2.4.1.23 | ColumnaclRuleLogging | read-create | current | Flag to indicate that the ACL rule is being logged. A hardware count of the number of times this rule is hit is reported via the aclTrapRuleLogEvent notificati… |
| 1.3.6.1.4.1.4526.11.3.2.4.1.26 | ColumnaclRuleRateLimitCrate | read-create | current | Committed rate attribute statement value, specified in kbps. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.27 | ColumnaclRuleRateLimitCburst | read-create | current | Committed burst size attribute statement value, specified in kbytes. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.29 | ColumnaclRuleIcmpType | read-create | current | ACL rule matches on the specified ICMP type. All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.30 | ColumnaclRuleIcmpCode | read-create | current | ACL rule matches on the specified ICMP code. All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.31 | ColumnaclRuleIgmpType | read-create | current | ACL rule matches on the specified IGMP type. All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.32 | ColumnaclRuleEstablished | read-create | current | Flag to indicate the ACL rule to match on TCP packets that has either RST or ACK bits set in the TCP header |
| 1.3.6.1.4.1.4526.11.3.2.4.1.33 | ColumnaclRuleFragments | read-create | current | Flag to indicate the ACL rule to match if the packet is fragmented |
| 1.3.6.1.4.1.4526.11.3.2.4.1.34 | ColumnaclRuleIsDuplicated | read-create | current | Read-only object, which verifies whether the specified ACL rule is duplicated. If the rule is duplicated then ir is recommended to remove it. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.35 | ColumnaclRuleHitCount | read-only | current | Number of times the ACL rule was hit for IPv4 ACL. |
| 1.3.6.1.4.1.4526.11.3.2.4.1.36 | ColumnaclRuleCounterClear | read-write | current | Clears the counter of the specified rule within an IPv4 access list. |
| 1.3.6.1.4.1.4526.11.3.2.5 | ScalaraclMacIndexNextFree | read-only | current | This object contains an unused value for the aclMacIndex to be used when creating a new MAC ACL. A value of zero zero indicates the ACL table is full. |
| 1.3.6.1.4.1.4526.11.3.2.6 | TableaclMacTable | not-accessible | current | A table of MAC ACL instances. |
| 1.3.6.1.4.1.4526.11.3.2.6.1 | RowaclMacEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.11.3.2.6.1.1 | ColumnaclMacIndex | not-accessible | current | The MAC ACL table index this instance is associated with. When creating a new MAC ACL, refer to the aclMacIndexNextFree object to determine the next available … |
| 1.3.6.1.4.1.4526.11.3.2.6.1.2 | ColumnaclMacName | read-create | current | The name of this MAC ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this MAC ACL. An existing MAC ACL can be renamed by… |
| 1.3.6.1.4.1.4526.11.3.2.6.1.3 | ColumnaclMacStatus | read-create | current | Status of this instance. ACL MAC entries can not be deleted until all rows in the aclIfTable and aclRuleTable with corresponding values of aclMacIndex have bee… |
| 1.3.6.1.4.1.4526.11.3.2.6.1.4 | ColumnaclMacResquenceStartRuleNumber | read-write | current | Renumber the sequence numbers of the rule entries for specified MAC ACL with the given increment value (aclMacResequenceIncrement SNMP object) starting from a … |
| 1.3.6.1.4.1.4526.11.3.2.6.1.5 | ColumnaclMacResequenceIncrement | read-write | current | Renumber the sequence numbers of the rule entries for specified MAC ACL with the given increment value (aclMacResequenceIncrement SNMP object) starting from a … |
| 1.3.6.1.4.1.4526.11.3.2.6.1.6 | ColumnaclMacListCounterClear | read-write | current | Clears all counters within a specified MAC access list. |
| 1.3.6.1.4.1.4526.11.3.2.7 | TableaclMacRuleTable | not-accessible | current | A table of layer 2 MAC ACL Rule instances. |
| 1.3.6.1.4.1.4526.11.3.2.7.1 | RowaclMacRuleEntry | not-accessible | current | A table of layer 2 MAC ACL Classification Rules |
| 1.3.6.1.4.1.4526.11.3.2.7.1.1 | ColumnaclMacRuleIndex | read-create | current | The index of this rule instance within an MAC ACL. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.2 | ColumnaclMacRuleAction | read-create | current | The type of action this MAC ACL rule should perform. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.3 | ColumnaclMacRuleCos | read-create | current | The Class of Service (COS) used in the MAC ACL Classification. This is the three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame. F… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.4 | ColumnaclMacRuleCos2 | read-create | current | The Secondary Class of Service (COS2) used in the MAC ACL Classification. This is the three-bit user priority field in the second/inner 802.1Q tag header of a … |
| 1.3.6.1.4.1.4526.11.3.2.7.1.5 | ColumnaclMacRuleDestMacAddr | read-create | current | The Destination MAC address used in the MAC ACL Classification. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.6 | ColumnaclMacRuleDestMacMask | read-create | current | The Destination MAC address mask used in the MAC ACL Classification. This mask value identifies the portion of the aclMacRuleDestMacAddr that is compared again… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.7 | ColumnaclMacRuleEtypeKey | read-create | current | The Ethertype keyword used in the MAC ACL Classification. A keyword of custom(1) requires that the aclMacRuleEtypeValue object also be set. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.8 | ColumnaclMacRuleEtypeValue | read-create | current | The Ethertype custom value used in the MAC ACL Classification. This object is only valid if the aclMacRuleEtypeKey is set to custom(1). The allowed value for t… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.9 | ColumnaclMacRuleSrcMacAddr | read-create | current | The Source MAC address used in the MAC ACL Classification. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.10 | ColumnaclMacRuleSrcMacMask | read-create | current | The Source MAC address mask used in the MAC ACL Classification. This mask value identifies the portion of the aclMacRuleSrcMacAddr that is compared against a p… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.11 | ColumnaclMacRuleVlanId | read-create | current | The VLAN ID value used in the MAC ACL Classification. The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet … |
| 1.3.6.1.4.1.4526.11.3.2.7.1.12 | ColumnaclMacRuleVlanIdRangeStart | read-create | current | The VLAN ID range start value used in the MAC ACL Classification. Setting this value greater than the current aclMacRuleVlanIdRangeEnd changes the VLAN ID rang… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.13 | ColumnaclMacRuleVlanIdRangeEnd | read-create | current | The VLAN ID range end value used in the MAC ACL Classification. Setting this value less than the current aclMacRuleVlanIdRangeStart changes the VLAN ID range s… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.14 | ColumnaclMacRuleVlanId2 | read-create | current | The Secondary VLAN ID value used in the MAC ACL Classification. The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.15 | ColumnaclMacRuleVlanId2RangeStart | read-create | current | The Secondary VLAN ID range start value used in the MAC ACL Classification. Setting this value greater than the current aclMacRuleVlanId2RangeEnd changes the S… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.16 | ColumnaclMacRuleVlanId2RangeEnd | read-create | current | The Secondary VLAN ID range end value used in the MAC ACL Classification. Setting this value less than the current aclMacRuleVlanId2RangeStart changes the Seco… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.17 | ColumnaclMacRuleStatus | read-create | current | Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete … |
| 1.3.6.1.4.1.4526.11.3.2.7.1.18 | ColumnaclMacRuleAssignQueueId | read-create | current | Queue identifier to which all inbound packets matching this MAC ACL rule are directed. This object defaults to the standard queue assignment for user priority … |
| 1.3.6.1.4.1.4526.11.3.2.7.1.19 | ColumnaclMacRuleRedirectIntf | read-create | current | A non-zero value indicates the external ifIndex to which all inbound packets matching this MAC ACL rule are directed. A value of zero means packet redirection … |
| 1.3.6.1.4.1.4526.11.3.2.7.1.20 | ColumnaclMacRuleMatchEvery | read-create | current | Flag to indicate that the MAC ACL rule is defined to match all packets, regardless of Ethertype. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.21 | ColumnaclMacRuleMirrorIntf | read-create | current | A non-zero value indicates the external ifIndex to which all inbound packets matching this MAC ACL rule are copied. A value of zero means packet mirroring is n… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.22 | ColumnaclMacRuleLogging | read-create | current | Flag to indicate that the ACL rule is being logged. A hardware count of the number of times this rule is hit is reported via the aclTrapRuleLogEvent notificati… |
| 1.3.6.1.4.1.4526.11.3.2.7.1.25 | ColumnaclMacRuleRateLimitCrate | read-create | current | Committed rate attribute statement value, specified in kbps. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.26 | ColumnaclMacRuleRateLimitCburst | read-create | current | Committed burst size attribute statement value, specified in kbytes. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.28 | ColumnaclMacRuleIsDuplicated | read-create | current | Read-only object, which verifies whether the specified MAC ACL rule is duplicated. If the rule is duplicated then ir is recommended to remove it. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.29 | ColumnaclMacRuleHitCount | read-only | current | Number of times the ACL rule was hit for MAC ACL. |
| 1.3.6.1.4.1.4526.11.3.2.7.1.30 | ColumnaclMacRuleCounterClear | read-write | current | Clears the counter of the specified rule within a MAC access list. |
| 1.3.6.1.4.1.4526.11.3.2.8 | TableaclIfTable | not-accessible | current | A table of ACL interface instances per direction. |
| 1.3.6.1.4.1.4526.11.3.2.8.1 | RowaclIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.11.3.2.8.1.1 | ColumnaclIfIndex | not-accessible | current | The interface to which this ACL instance applies. |
| 1.3.6.1.4.1.4526.11.3.2.8.1.2 | ColumnaclIfDirection | not-accessible | current | The interface direction to which this ACL instance applies. |
| 1.3.6.1.4.1.4526.11.3.2.8.1.3 | ColumnaclIfSequence | not-accessible | current | The relative evaluation sequence of this ACL for this interface and direction. When multiple ACLs are allowed for a given interface and direction, the sequence… |
| 1.3.6.1.4.1.4526.11.3.2.8.1.4 | ColumnaclIfAclType | not-accessible | current | The type of this ACL, which is used to interpret the aclIfId object value. Each type of ACL uses its own numbering scheme for identification (see aclIfAclId ob… |
| 1.3.6.1.4.1.4526.11.3.2.8.1.5 | ColumnaclIfAclId | not-accessible | current | The ACL identifier value, which is interpreted based on the aclIfType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standard … |
| 1.3.6.1.4.1.4526.11.3.2.8.1.6 | ColumnaclIfStatus | read-create | current | Status of this instance. active(1) - this ACL interface instance is active createAndGo(4) - set to this value to assign an ACL to an interface and direction de… |
| 1.3.6.1.4.1.4526.11.3.2.9 | NodeaclLoggingGroup | |||
| 1.3.6.1.4.1.4526.11.3.2.9.2 | ScalaraclTrapRuleIndex | accessible-for-notify | current | The index of an ACL rule instance. Used by aclTrapRuleLogEvent trap. |
| 1.3.6.1.4.1.4526.11.3.2.9.3 | ScalaraclTrapRuleAction | accessible-for-notify | current | The type of action this rule should perform, either permit(1) or deny(2). Used by aclTrapRuleLogEvent trap. |
| 1.3.6.1.4.1.4526.11.3.2.9.4 | ScalaraclTrapRuleHitCount | accessible-for-notify | current | Number of times the ACL rule was hit during the most recent logging interval. Used by aclTrapRuleLogEvent trap. |
| 1.3.6.1.4.1.4526.11.3.2.9.5 | ScalaraclTrapFlag | read-write | current | ACL Trap Flag - Enables or disables ACL trap generation. When this value is set to enable(1), ACL traps are sent from the switch when they occur. |
| 1.3.6.1.4.1.4526.11.3.2.10 | ScalaraclIpv6IndexNextFree | read-only | current | This object contains an unused value for the aclIPv6Index to be used when creating a new IPv6 ACL. A value of zero zero indicates the ACL table is full. |
| 1.3.6.1.4.1.4526.11.3.2.11 | TableaclIpv6Table | not-accessible | current | A table of Ipv6 ACL instances. |
| 1.3.6.1.4.1.4526.11.3.2.11.1 | RowaclIpv6Entry | not-accessible | current | |
| 1.3.6.1.4.1.4526.11.3.2.11.1.1 | ColumnaclIpv6Index | not-accessible | current | The IPv6 ACL table index this instance is associated with. When creating a new IPv6 ACL, refer to the aclIPv6IndexNextFree object to determine the next availab… |
| 1.3.6.1.4.1.4526.11.3.2.11.1.2 | ColumnaclIpv6Name | read-create | current | The name of this IPv6 ACL entry, which must consist of 1 to 31 alphanumeric characters and uniquely identify this IPv6 ACL. An existing IPv6 ACL can be renamed… |
| 1.3.6.1.4.1.4526.11.3.2.11.1.3 | ColumnaclIpv6Status | read-create | current | Status of this instance. active(1) - this ACL instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to del… |
| 1.3.6.1.4.1.4526.11.3.2.11.1.4 | ColumnaclIpv6ResquenceStartRuleNumber | read-write | current | Renumber the sequence numbers of the rule entries for specified IPv6 ACL with the given increment value (aclIpv6ResequenceIncrement SNMP object) starting from … |
| 1.3.6.1.4.1.4526.11.3.2.11.1.5 | ColumnaclIpv6ResequenceIncrement | read-write | current | Renumber the sequence numbers of the rule entries for specified IPv6 ACL with the given increment value (aclIpv6ResequenceIncrement SNMP object) starting from … |
| 1.3.6.1.4.1.4526.11.3.2.11.1.6 | ColumnaclIpv6ListCounterClear | read-write | current | Clears all counters within a specified IPv6 access list. |
| 1.3.6.1.4.1.4526.11.3.2.12 | TableaclIpv6RuleTable | not-accessible | current | A table of IPv6 ACL Rule instances. |
| 1.3.6.1.4.1.4526.11.3.2.12.1 | RowaclIpv6RuleEntry | not-accessible | current | A table of IPv6 ACL Classification Rules |
| 1.3.6.1.4.1.4526.11.3.2.12.1.1 | ColumnaclIpv6RuleIndex | read-create | current | The index of this rule instance within an IPv6 ACL. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.2 | ColumnaclIpv6RuleAction | read-create | current | The type of action this IPv6 ACL rule should perform. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.3 | ColumnaclIpv6RuleLogging | read-create | current | Flag to indicate that the ACL rule is being logged. A hardware count of the number of times this rule is hit is reported via the aclTrapRuleLogEvent notificati… |
| 1.3.6.1.4.1.4526.11.3.2.12.1.4 | ColumnaclIpv6RuleAssignQueueId | read-create | current | Queue identifier to which all inbound packets matching this ACL rule are directed. This object defaults to the standard queue assignment for user priority 0 tr… |
| 1.3.6.1.4.1.4526.11.3.2.12.1.5 | ColumnaclIpv6RuleRedirectIntf | read-create | current | A non-zero value indicates the external ifIndex to which all inbound packets matching this Ipv6 ACL rule are directed. A value of zero means packet redirection… |
| 1.3.6.1.4.1.4526.11.3.2.12.1.6 | ColumnaclIpv6RuleMirrorIntf | read-create | current | A non-zero value indicates the external ifIndex to which all inbound packets matching this IPv6 ACL rule are copied. A value of zero means packet mirroring is … |
| 1.3.6.1.4.1.4526.11.3.2.12.1.7 | ColumnaclIpv6RuleMatchEvery | read-create | current | Flag to indicate that the ACL rule is defined to match on every IP packet, regardless of content. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.8 | ColumnaclIpv6RuleProtocol | read-create | current | icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.9 | ColumnaclIpv6RuleSrcL4Port | read-create | current | The Source Port Number (Layer 4) used in the ACL Classification. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.10 | ColumnaclIpv6RuleSrcL4PortRangeStart | read-create | current | The Source Port Number(Layer 4) range start. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.11 | ColumnaclIpv6RuleSrcL4PortRangeEnd | read-create | current | The Source Port Number(Layer 4) range end. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.12 | ColumnaclIpv6RuleDestL4Port | read-create | current | The Destination Port (Layer 4) used in ACl classification. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.13 | ColumnaclIpv6RuleDestL4PortRangeStart | read-create | current | The Destination Port (Layer 4) starting range used in ACL classification. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.14 | ColumnaclIpv6RuleDestL4PortRangeEnd | read-create | current | The Destination Port (Layer 4) ending range used in ACL classification. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.15 | ColumnaclIpv6RuleStatus | read-create | current | Status of this instance. active(1) - this ACL Rule is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete … |
| 1.3.6.1.4.1.4526.11.3.2.12.1.16 | ColumnaclIpv6RuleFlowLabel | read-create | current | Flow label is 20-bit number that is unique to an IPv6 packet, used by end stations to signify quality-of-service handling in routers. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.17 | ColumnaclIpv6RuleIPDSCP | read-create | current | The Differentiated Services Code Point value. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.18 | ColumnaclRuleSrcIpv6Prefix | read-write | current | The Ipv6 Prefix Address configured on the Service Port. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.19 | ColumnaclRuleSrcIpv6PrefixLength | read-create | current | The Prefix Length. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.20 | ColumnaclRuleDstIpv6Prefix | read-write | current | The Ipv6 Prefix Address configured on the Service Port. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.21 | ColumnaclRuleDstIpv6PrefixLength | read-create | current | The Prefix Length. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.24 | ColumnaclIpv6RuleRateLimitCrate | read-create | current | Committed rate attribute statement value, specified in kbps. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.25 | ColumnaclIpv6RuleRateLimitCburst | read-create | current | Committed burst size attribute statement value, specified in kbytes. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.27 | ColumnaclIpv6RuleIcmpType | read-create | current | ACL rule matches on the specified ICMP type. All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.28 | ColumnaclIpv6RuleIcmpCode | read-create | current | ACL rule matches on the specified ICMP code. All values from 1 to 255 are valid. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.29 | ColumnaclIpv6RuleRouting | read-create | current | Flag to indicate the ACL rule to match on packets with routing extention header |
| 1.3.6.1.4.1.4526.11.3.2.12.1.30 | ColumnaclIpv6RuleFragments | read-create | current | Flag to indicate the ACL rule to match if the packets with fragments extention header |
| 1.3.6.1.4.1.4526.11.3.2.12.1.31 | ColumnaclIpv6RuleEstablished | read-create | current | Flag to indicate the ACL rule to match on TCP packets that has either RST or ACK bits set in the TCP header |
| 1.3.6.1.4.1.4526.11.3.2.12.1.32 | ColumnaclIpv6RuleIsDuplicated | read-create | current | Read-only object, which verifies whether the specified ACL rule is duplicated. If the rule is duplicated then ir is recommended to remove it. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.33 | ColumnaclIpv6RuleHitCount | read-only | current | Number of times the ACL rule was hit for IPv6 ACL. |
| 1.3.6.1.4.1.4526.11.3.2.12.1.34 | ColumnaclIpv6RuleCounterClear | read-write | current | Clears the counter of the specified rule within an Ipv6 aceess list. |
| 1.3.6.1.4.1.4526.11.3.2.13 | TableaclVlanTable | not-accessible | current | A table of ACL VLAN instances per direction. |
| 1.3.6.1.4.1.4526.11.3.2.13.1 | RowaclVlanEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.11.3.2.13.1.1 | ColumnaclVlanIndex | not-accessible | current | The Vlan to which this ACL instance applies. |
| 1.3.6.1.4.1.4526.11.3.2.13.1.2 | ColumnaclVlanDirection | not-accessible | current | The Vlan direction to which this ACL instance applies. |
| 1.3.6.1.4.1.4526.11.3.2.13.1.3 | ColumnaclVlanSequence | not-accessible | current | The relative evaluation sequence of this ACL for this Vlan and direction. When multiple ACLs are allowed for a given Vlan and direction, the sequence number de… |
| 1.3.6.1.4.1.4526.11.3.2.13.1.4 | ColumnaclVlanAclType | not-accessible | current | The type of this ACL, which is used to interpret the aclVlanId object value. Each type of ACL uses its own numbering scheme for identification (see aclVlanAclI… |
| 1.3.6.1.4.1.4526.11.3.2.13.1.5 | ColumnaclVlanAclId | not-accessible | current | The ACL identifier value, which is interpreted based on the aclVlanType object. For the IP ACLs, the actual ACL number is its identifier as follows: IP standar… |
| 1.3.6.1.4.1.4526.11.3.2.13.1.6 | ColumnaclVlanStatus | read-create | current | Status of this instance. active(1) - this ACL Vlan instance is active createAndGo(4) - set to this value to assign an ACL to a Vlan and direction destroy(6) - … |
| 1.3.6.1.4.1.4526.11.3.2.14 | ScalaraclNamedIpv4IndexNextFree | read-only | current | This object contains an unused value for the aclIndex to be used when creating a new named IPv4 ACL. A value of zero zero indicates the ACL table is full. |
| 1.3.6.1.4.1.4526.11.3.2.15 | TableagentAclRemarkConfigTable | not-accessible | current | A table for configuration of IPv4 ACL remarks entries. Created remarks will be associated with IPv4 ACL rule when the rule is created. |
| 1.3.6.1.4.1.4526.11.3.2.15.1 | RowagentAclRemarkConfigEntry | not-accessible | current | The row of IPv4 ACL remarks configuration table. |
| 1.3.6.1.4.1.4526.11.3.2.15.1.1 | ColumnagentAclRemarkIndex | read-create | current | Index of remark(not associated with a rule) instance within IPv4 ACL. |
| 1.3.6.1.4.1.4526.11.3.2.15.1.2 | ColumnagentAclRemarkStr | read-create | current | IPv4 ACL remark(comment) string configuration. Each remark line is limited to 100 characters. Remark may consist of characters in the range A-Z, a-z, 0-9 and s… |
| 1.3.6.1.4.1.4526.11.3.2.15.1.3 | ColumnagentAclRemarkStatus | read-create | current | Status of this instance. active(1) - this remark is configured. createAndGo(4) - set to this value to create the remark entry. agentAclRemarkStr should be spec… |
| 1.3.6.1.4.1.4526.11.3.2.16 | TableagentAclRemarkRuleTable | not-accessible | current | This table displays remarks which are associated with IPv4 ACL rules. Each rule can be uniquely identified with IPv4 ACL and rule numbers. Each remark within e… |
| 1.3.6.1.4.1.4526.11.3.2.16.1 | RowagentAclRemarkRuleEntry | not-accessible | current | Row of the IPv4 ACL rule remarks table. |
| 1.3.6.1.4.1.4526.11.3.2.16.1.1 | ColumnagentAclRuleRemarkIndex | read-only | current | The index of the remark instance within IPv4 ACL rule. |
| 1.3.6.1.4.1.4526.11.3.2.16.1.2 | ColumnagentAclRuleRemarkStr | read-only | current | Displays the remark string for the specified IPv4 ACL rule. |
| 1.3.6.1.4.1.4526.11.3.2.16.1.3 | ColumnagentAclRuleRemarkStatus | read-create | current | Status of this instance. active(1) - this remark is configured. destroy(6) - set to this value to delete the remark entry. |
| 1.3.6.1.4.1.4526.11.3.2.17 | TableagentAclIpv6RemarkConfigTable | not-accessible | current | A table for configuration of IPv6 ACL remarks entries. Created remarks will be associated with IPv6 ACL rule when the rule is created. |
| 1.3.6.1.4.1.4526.11.3.2.17.1 | RowagentAclIpv6RemarkConfigEntry | not-accessible | current | The row of IPv6 ACL remarks configuration table. |
| 1.3.6.1.4.1.4526.11.3.2.17.1.1 | ColumnagentAclIpv6RemarkIndex | read-create | current | Index of remark(not associated with a rule) instance within IPv6 ACL. |
| 1.3.6.1.4.1.4526.11.3.2.17.1.2 | ColumnagentAclIpv6RemarkStr | read-create | current | IPv6 ACL remark(comment) string configuration. Each remark line is limited to 100 characters. Remark may consist of characters in the range A-Z, a-z, 0-9 and s… |
| 1.3.6.1.4.1.4526.11.3.2.17.1.3 | ColumnagentAclIpv6RemarkStatus | read-create | current | Status of this instance. active(1) - this remark is configured. createAndGo(4) - set to this value to create the remark entry. agentAclIpv6RemarkStr should be … |
| 1.3.6.1.4.1.4526.11.3.2.18 | TableagentAclIpv6RemarkRuleTable | not-accessible | current | This table displays remarks which are associated with IPv6 ACL rules. Each rule can be uniquely identified with IPv6 ACL and rule numbers. Each remark within e… |
| 1.3.6.1.4.1.4526.11.3.2.18.1 | RowagentAclIpv6RemarkRuleEntry | not-accessible | current | Row of the IPv6 ACL rule remarks table. |
| 1.3.6.1.4.1.4526.11.3.2.18.1.1 | ColumnagentAclIpv6RuleRemarkIndex | read-only | current | The index of the remark instance within IPv6 ACL rule. |
| 1.3.6.1.4.1.4526.11.3.2.18.1.2 | ColumnagentAclIpv6RuleRemarkStr | read-only | current | Displays the remark string for the specified IPv6 ACL rule. |
| 1.3.6.1.4.1.4526.11.3.2.18.1.3 | ColumnagentAclIpv6RuleRemarkStatus | read-create | current | Status of this instance. active(1) - this remark is configured. destroy(6) - set to this value to delete the remark entry. |
| 1.3.6.1.4.1.4526.11.3.2.19 | TableagentAclMacRemarkConfigTable | not-accessible | current | A table for configuration of MAC ACL remarks entries. Created remarks will be associated with MAC ACL rule when the rule is created. |
| 1.3.6.1.4.1.4526.11.3.2.19.1 | RowagentAclMacRemarkConfigEntry | not-accessible | current | The row of MAC ACL remarks configuration table. |
| 1.3.6.1.4.1.4526.11.3.2.19.1.1 | ColumnagentAclMacRemarkIndex | read-create | current | Index of remark(not associated with a rule) instance within MAC ACL. |
| 1.3.6.1.4.1.4526.11.3.2.19.1.2 | ColumnagentAclMacRemarkStr | read-create | current | MAC ACL remark(comment) string configuration. Each remark line is limited to 100 characters. Remark may consist of characters in the range A-Z, a-z, 0-9 and sp… |
| 1.3.6.1.4.1.4526.11.3.2.19.1.3 | ColumnagentAclMacRemarkStatus | read-create | current | Status of this instance. active(1) - this remark is configured. createAndGo(4) - set to this value to create the remark entry. agentAclMacRemarkStr should be s… |
| 1.3.6.1.4.1.4526.11.3.2.20 | TableagentAclMacRemarkRuleTable | not-accessible | current | This table displays remarks which are associated with MAC ACL rules. Each rule can be uniquely identified with MAC ACL and rule numbers. Each remark within eac… |
| 1.3.6.1.4.1.4526.11.3.2.20.1 | RowagentAclMacRemarkRuleEntry | not-accessible | current | Row of the MAC ACL rule remarks table. |
| 1.3.6.1.4.1.4526.11.3.2.20.1.1 | ColumnagentAclMacRuleRemarkIndex | read-only | current | The index of the remark instance within MAC ACL rule. |
| 1.3.6.1.4.1.4526.11.3.2.20.1.2 | ColumnagentAclMacRuleRemarkStr | read-only | current | Displays the remark string for the specified MAC ACL rule. |
| 1.3.6.1.4.1.4526.11.3.2.20.1.3 | ColumnagentAclMacRuleRemarkStatus | read-create | current | Status of this instance. active(1) - this remark is configured. destroy(6) - set to this value to delete the remark entry. |
| 1.3.6.1.4.1.4526.11.3.2.21 | NodeagentAclControlGroupEntry | |||
| 1.3.6.1.4.1.4526.11.3.2.21.1 | ScalaragentAclIdCounterClearAll | read-write | current | Clears all IPv4 ACL ID counters. |
| 1.3.6.1.4.1.4526.11.3.2.21.2 | ScalaragentAclNameCounterClearAll | read-write | current | Clears all IPv4 ACL Named counters. |
| 1.3.6.1.4.1.4526.11.3.2.21.3 | ScalaragentAclCounterClearAll | read-write | current | Clears all IPv4 ACL counters. |
| 1.3.6.1.4.1.4526.11.3.2.22 | ScalaragentAclMacCounterClearAll | read-write | current | Clears all MAC ACL counters. |
| 1.3.6.1.4.1.4526.11.3.2.23 | ScalaragentAclIpv6IdCounterClearAll | read-write | current | Clears all IPv6 ACL counters. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AclBurstSize | Unsigned32 (1..128) | current | The number of kilobytes (Kbytes) in a packet that may be sent in a traffic stream without regard for other traffic streams. |
| EtypeValue | Unsigned32 (1536..65535) | current | Ethertype value of a packet. The allowed value is 0x0600 to 0xFFFF. |
| Ipv6AddressPrefix | OCTET STRING (SIZE (0..16)) | current | This data type is used to model IPv6 address prefixes. This is a binary string of up to 16 octets in network byte-order. |