NETGEAR-RADLAN-BRGMACSWITCH-MIB
12 objects
This private MIB module defines Switching Parameters private MIBs.
Imported Objects
| NETGEAR-RADLAN-MIB | rnd |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.50 | IdentityrlBrgMacSwitch | This private MIB module defines Switching Parameters private MIBs. | ||
| 1.3.6.1.4.1.4526.17.50.1 | ScalarrlBrgMacSwVersion | read-only | current | MIB's version, the current version is 2. |
| 1.3.6.1.4.1.4526.17.50.2 | ScalarrlBrgMacSwMaxTableNumber | read-only | current | Maximum number of MAC Tables supported by the device. |
| 1.3.6.1.4.1.4526.17.50.3 | ScalarrlBrgMacSwDynamicTables | read-only | current | Specifies whether the device supports port dynamic MAC tables. |
| 1.3.6.1.4.1.4526.17.50.5 | ScalarrlBrgMacSwOldEntryDeleteMode | read-only | current | The method used to delete old unused entries refresh_flag: The high level sets a flag when it adds or updates an entry, the Switch clears the flag each time, w… |
| 1.3.6.1.4.1.4526.17.50.6 | ScalarrlBrgMacSwSpanningTree | read-only | current | Specifies whether the device supports port the Spanning Tree Protocol. |
| 1.3.6.1.4.1.4526.17.50.7 | ScalarrlBrgMacSwKeyType | read-only | current | Specified the used MAC Address Table kye format: macOnly: One global MAC Address Table per device (leaky VLANs). tagAndMac: MAC Address Table per each VLAN (st… |
| 1.3.6.1.4.1.4526.17.50.8 | ScalarrlBrgMacSwYellowBoundary | read-write | current | The yellow boundary. |
| 1.3.6.1.4.1.4526.17.50.9 | ScalarrlBrgMacSwRedBoundary | read-write | current | The yellow boundary. |
| 1.3.6.1.4.1.4526.17.50.10 | ScalarrlBrgMacSwTrapEnable | read-write | current | This variable indicates whether to create a SNMP trap if adding dynamic mac failed due to full hash chain. |
| 1.3.6.1.4.1.4526.17.50.11 | ScalarrlBrgMacSwOperTrapCount | read-only | current | This variable indicates the trap counter status (i.e. number of received MAC addresses since the last trap sent that haven't been inserted into the hash). It i… |
| 1.3.6.1.4.1.4526.17.50.12 | ScalarrlBrgMacSwAdminTrapFrequency | read-write | current | This variable indicates the minimal frequency (in seconds) of sending a trap. It is relevant only when trap is enabled. |