NETGEAR-RADLAN-BRIDGE-SECURITY
107 objects
The private MIB module definition for DHCP Snoop, ARP Inspection and Ip source Guard features.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| NETGEAR-RADLAN-MIB | rnd |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.112 | IdentityrlBridgeSecurity | The private MIB module definition for DHCP Snoop, ARP Inspection and Ip source Guard features. | ||
| 1.3.6.1.4.1.4526.17.112.1 | NoderlIpDhcpSnoop | |||
| 1.3.6.1.4.1.4526.17.112.1.1 | ScalarrlIpDhcpSnoopMibVersion | read-only | current | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.4526.17.112.1.2 | ScalarrlIpDhcpSnoopEnable | read-write | current | Specifies a system DHCP Snoop enable state. |
| 1.3.6.1.4.1.4526.17.112.1.3 | ScalarrlIpDhcpSnoopFileEnable | read-write | current | Specifies a system DHCP Snoop file enable state. |
| 1.3.6.1.4.1.4526.17.112.1.4 | ScalarrlIpDhcpSnoopClearAction | read-write | current | Used to clear DHCP Snoop Table. |
| 1.3.6.1.4.1.4526.17.112.1.5 | ScalarrlIpDhcpSnoopFileUpdateTime | read-write | current | Configures in seconds the period of time between file updates. The valid range is 600 - 86400. |
| 1.3.6.1.4.1.4526.17.112.1.6 | ScalarrlIpDhcpSnoopVerifyMacAddress | read-write | current | Configures on an un-trusted port whether the source MAC address in a DHCP packet matches the client hardware address. |
| 1.3.6.1.4.1.4526.17.112.1.7 | ScalarrlIpDhcpSnoopCurrentEntiresNumber | read-only | current | Contain the current number of DHCP snooping entries for all types. |
| 1.3.6.1.4.1.4526.17.112.1.8 | ScalarrlIpDhcpOpt82InsertionEnable | read-write | current | Specifies a DHCP option 82 insertion enable state. |
| 1.3.6.1.4.1.4526.17.112.1.9 | ScalarrlIpDhcpOpt82RxOnUntrustedEnable | read-write | current | Specifies a DHCP option 82 receive on untrusted port enable state. |
| 1.3.6.1.4.1.4526.17.112.1.10 | TablerlIpDhcpSnoopStaticTable | not-accessible | current | The table specifies all DHCP Snoop Static (configured by user) entries. The entry contains a local IP address of the DHCP client, a Port interface to which a D… |
| 1.3.6.1.4.1.4526.17.112.1.10.1 | RowrlIpDhcpSnoopStaticEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.1.10.1.1 | ColumnrlIpDhcpSnoopStaticVLANTag | not-accessible | current | A DHCP Snoop Static entry vlan tag. |
| 1.3.6.1.4.1.4526.17.112.1.10.1.2 | ColumnrlIpDhcpSnoopStaticMACAddress | not-accessible | current | A DHCP Snoop Static entry mac address |
| 1.3.6.1.4.1.4526.17.112.1.10.1.3 | ColumnrlIpDhcpSnoopStaticIPAddress | read-write | current | A DHCP Snoop Static entry IP address. |
| 1.3.6.1.4.1.4526.17.112.1.10.1.4 | ColumnrlIpDhcpSnoopStaticPortInterface | read-write | current | A DHCP Snoop Static entry Port interface. |
| 1.3.6.1.4.1.4526.17.112.1.10.1.5 | ColumnrlIpDhcpSnoopStaticRowStatus | read-write | current | A status can be destroy, active or createAndGo |
| 1.3.6.1.4.1.4526.17.112.1.11 | TablerlIpDhcpSnoopTable | not-accessible | current | DHCP Snoop entry. Use to add/delete a dynamic entries and to view all entries (dynamic and static) |
| 1.3.6.1.4.1.4526.17.112.1.11.1 | RowrlIpDhcpSnoopEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.1.11.1.1 | ColumnrlIpDhcpSnoopVLANTag | not-accessible | current | A DHCP Snoop entry vlan tag. |
| 1.3.6.1.4.1.4526.17.112.1.11.1.2 | ColumnrlIpDhcpSnoopMACAddress | not-accessible | current | A DHCP Snoop entry mac address |
| 1.3.6.1.4.1.4526.17.112.1.11.1.3 | ColumnrlIpDhcpSnoopType | read-write | current | A DHCP Snoop entry type: static or dynamic. |
| 1.3.6.1.4.1.4526.17.112.1.11.1.4 | ColumnrlIpDhcpSnoopLeaseTime | read-write | current | A DHCP Snoop lease time. For static entry the lease time is 0xFFFFFFFF |
| 1.3.6.1.4.1.4526.17.112.1.11.1.5 | ColumnrlIpDhcpSnoopIPAddress | read-write | current | The IP address of the DHCP client referred to in this table entry. |
| 1.3.6.1.4.1.4526.17.112.1.11.1.6 | ColumnrlIpDhcpSnoopPortInterface | read-write | current | Identifies the port Interface ifindex, which connected to DHCP client identified with the entry. |
| 1.3.6.1.4.1.4526.17.112.1.11.1.7 | ColumnrlIpDhcpSnoopRowStatus | read-write | current | Entry status. A valid status is CreateandGo or Delete. |
| 1.3.6.1.4.1.4526.17.112.1.12 | TablerlIpDhcpSnoopEnableVlanTable | not-accessible | current | An Ip Dhcp Snooping enabled VLAN table. |
| 1.3.6.1.4.1.4526.17.112.1.12.1 | RowrlIpDhcpSnoopEnableVlanEntry | not-accessible | current | An Ip Dhcp Snooping enabled VLAN entry. |
| 1.3.6.1.4.1.4526.17.112.1.12.1.1 | ColumnrlIpDhcpSnoopEnableVlanTag | not-accessible | current | A DHCP Snoop entry vlan tag. |
| 1.3.6.1.4.1.4526.17.112.1.12.1.2 | ColumnrlIpDhcpSnoopEnableVlanRowStatus | read-write | current | Entry status. A valid status is CreateandGo and Delete. |
| 1.3.6.1.4.1.4526.17.112.1.13 | TablerlIpDhcpSnoopTrustedPortTable | not-accessible | current | DHCP Snoop Trusted ports entry. The entry created when port is configured as trusted. |
| 1.3.6.1.4.1.4526.17.112.1.13.1 | RowrlIpDhcpSnoopTrustedPortEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.1.13.1.2 | ColumnrlIpDhcpSnoopTrustedPortRowStatus | read-write | current | Entry status. A valid status is CreateandGo or Delete. |
| 1.3.6.1.4.1.4526.17.112.2 | NoderlIpSourceGuard | |||
| 1.3.6.1.4.1.4526.17.112.2.1 | ScalarrlIpSourceGuardMibVersion | read-only | current | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.4526.17.112.2.2 | ScalarrlIpSourceGuardEnable | read-write | current | FALSE - There is no Ip Source Guard in the system. TRUE - Ip Source Guard is enabled on system. |
| 1.3.6.1.4.1.4526.17.112.2.3 | ScalarrlIpSourceGuardRetryToInsert | read-write | current | When setted to retryToInsertNow all IP Source Guard inactive entries due to resource problem reinserted in the Policy. On get always return noAction. |
| 1.3.6.1.4.1.4526.17.112.2.4 | ScalarrlIpSourceGuardRetryTime | read-write | current | Configures in seconds the period of time the application retries to insert inactive by resource problem rules. The actual range is 10-600. 0 used to sign that … |
| 1.3.6.1.4.1.4526.17.112.2.5 | TablerlIpSourceGuardPortTable | not-accessible | current | IP Source Guard ports entry. The entry created when IP Source Guard enabled on port. |
| 1.3.6.1.4.1.4526.17.112.2.5.1 | RowrlIpSourceGuardPortEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.2.5.1.2 | ColumnrlIpSourceGuardPortRowStatus | read-write | current | Entry status. A valid status is CreateAndGo or Delete. |
| 1.3.6.1.4.1.4526.17.112.2.6 | TablerlIpSourceGuardTable | not-accessible | current | IP Source Guard entry. Use to view all entries (dynamic and static) |
| 1.3.6.1.4.1.4526.17.112.2.6.1 | RowrlIpSourceGuardEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.2.6.1.1 | ColumnrlIpSourceGuardIPAddress | not-accessible | current | The IP address of the Ip Source Guard entry. |
| 1.3.6.1.4.1.4526.17.112.2.6.1.2 | ColumnrlIpSourceGuardVLANTag | not-accessible | current | A Ip Source Guard entry vlan tag. |
| 1.3.6.1.4.1.4526.17.112.2.6.1.3 | ColumnrlIpSourceGuardMACAddress | read-only | current | A Ip Source Guard entry mac address |
| 1.3.6.1.4.1.4526.17.112.2.6.1.4 | ColumnrlIpSourceGuardType | read-only | current | A Ip Source Guard entry type: static or dynamic. |
| 1.3.6.1.4.1.4526.17.112.2.6.1.5 | ColumnrlIpSourceGuardStatus | read-only | current | Identifies the status of Ip Source Guard entry. |
| 1.3.6.1.4.1.4526.17.112.2.6.1.6 | ColumnrlIpSourceGuardFailReason | read-only | current | Identifies the reason for in-activity of Ip Source Guard entry. |
| 1.3.6.1.4.1.4526.17.112.2.7 | TablerlIpSourceGuardPermittedRuleCounterTable | not-accessible | current | The table includes, per vlan, the IP Source Guard permitted rules counters. |
| 1.3.6.1.4.1.4526.17.112.2.7.1 | RowrlIpSourceGuardPermittedRuleCounterEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.2.7.1.1 | ColumnrlIpSourceGuardPermittedRuleCounterVLANTag | not-accessible | current | Ip Source Guard permitted rules counters entry Vlan tag. |
| 1.3.6.1.4.1.4526.17.112.2.7.1.2 | ColumnrlIpSourceGuardPermittedRuleCounterNumOfStaticRules | read-only | current | Number of static rules added by IP Source Guard for the permitted Hosts |
| 1.3.6.1.4.1.4526.17.112.2.7.1.3 | ColumnrlIpSourceGuardPermittedRuleCounterNumOfDhcpRules | read-only | current | Number of rules added by IP Source Guard for the permitted Hosts, as a result of DHCP Snooping dynamic information. |
| 1.3.6.1.4.1.4526.17.112.3 | NoderlIpArpInspect | |||
| 1.3.6.1.4.1.4526.17.112.3.1 | ScalarrlIpArpInspectMibVersion | read-only | current | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.4526.17.112.3.2 | ScalarrlIpArpInspectEnable | read-write | current | Specifies a system ARP Inspection enable state. |
| 1.3.6.1.4.1.4526.17.112.3.3 | ScalarrlIpArpInspectLogInterval | read-write | current | Specify the minimal interval between successive ARP SYSLOG messages. 0 - message is immediately generated. 0xFFFFFFFF - messages would not be generated. A lega… |
| 1.3.6.1.4.1.4526.17.112.3.4 | ScalarrlIpArpInspectValidation | read-write | current | Defined a specific check on incoming ARP packets: Source MAC: Compare the source MAC address in the Ethernet header against the sender MAC address in the ARP b… |
| 1.3.6.1.4.1.4526.17.112.3.5 | TablerlIpArpInspectListTable | not-accessible | current | The table specifies all ARP Inspection List entries. The entry contains a list name, list IP address, a list Mac address. |
| 1.3.6.1.4.1.4526.17.112.3.5.1 | RowrlIpArpInspectListEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.3.5.1.1 | ColumnrlIpArpInspectListName | not-accessible | current | The Name of the Access List. |
| 1.3.6.1.4.1.4526.17.112.3.5.1.2 | ColumnrlIpArpInspectListIPAddress | not-accessible | current | ARP Inspection List IP address. |
| 1.3.6.1.4.1.4526.17.112.3.5.1.3 | ColumnrlIpArpInspectListMACAddress | read-write | current | ARP Inspection List mac address |
| 1.3.6.1.4.1.4526.17.112.3.5.1.4 | ColumnrlIpArpInspectListRowStatus | read-write | current | A status can be destroy, active or createAndGo |
| 1.3.6.1.4.1.4526.17.112.3.6 | TablerlIpArpInspectEnableVlanTable | not-accessible | current | An Ip ARP Inspection enabled VLAN table. |
| 1.3.6.1.4.1.4526.17.112.3.6.1 | RowrlIpArpInspectEnableVlanEntry | not-accessible | current | An Ip ARP Inspection enabled VLAN entry. |
| 1.3.6.1.4.1.4526.17.112.3.6.1.1 | ColumnrlIpArpInspectEnableVlanTag | not-accessible | current | An Ip ARP Inspection entry vlan tag. |
| 1.3.6.1.4.1.4526.17.112.3.6.1.2 | ColumnrlIpArpInspectAssignedListName | read-write | current | An Ip ARP Inspection assigned ACL name. |
| 1.3.6.1.4.1.4526.17.112.3.6.1.3 | ColumnrlIpArpInspectEnableVlanRowStatus | read-write | current | Entry status. A valid status is CreateandGo and Delete. |
| 1.3.6.1.4.1.4526.17.112.3.6.1.4 | ColumnrlIpArpInspectVlanNumOfArpForwarded | read-only | current | Total number of forwarded ARP packets, packets which were validated by ARP inspection |
| 1.3.6.1.4.1.4526.17.112.3.6.1.5 | ColumnrlIpArpInspectVlanNumOfArpDropped | read-only | current | Number of dropped ARP packets, which were validated by ARP inspection (mismatch , not-found and dropped for any reason) |
| 1.3.6.1.4.1.4526.17.112.3.6.1.6 | ColumnrlIpArpInspectVlanNumOfArpMismatched | read-only | current | Number of dropped ARP packets, which were validated by ARP inspection and inconsistency was found for IP and MAC (mismatch) |
| 1.3.6.1.4.1.4526.17.112.3.6.1.7 | ColumnrlIpArpInspectVlanClearCountersAction | read-write | current | If true, clear (set to zero) all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded , rlIpArpInspectVlanNumOfArpDropped and rlIpArpInspectVlanNumOfAr… |
| 1.3.6.1.4.1.4526.17.112.3.7 | TablerlIpArpInspectTrustedPortTable | not-accessible | current | ARP Inspection Trusted ports entry. The entry created when port is configured as trusted. |
| 1.3.6.1.4.1.4526.17.112.3.7.1 | RowrlIpArpInspectTrustedPortEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.3.7.1.2 | ColumnrlIpArpInspectTrustedPortRowStatus | read-write | current | Entry status. A valid status is CreateandGo or Delete. |
| 1.3.6.1.4.1.4526.17.112.3.8 | ScalarrlIpArpInspectClearCountersAction | read-write | current | If true, clear (set to zero) on all vlans: all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded , rlIpArpInspectVlanNumOfArpDropped and rlIpArpInsp… |
| 1.3.6.1.4.1.4526.17.112.4 | NoderlProtocolFiltering | |||
| 1.3.6.1.4.1.4526.17.112.4.1 | TablerlProtocolFilteringTable | not-accessible | current | Protocol filter configuration entry |
| 1.3.6.1.4.1.4526.17.112.4.1.1 | RowrlProtocolFilteringEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.4.1.1.1 | ColumnrlProtocolFilteringList | read-write | current | The list of protocol to be filtered. |
| 1.3.6.1.4.1.4526.17.112.4.1.1.2 | ColumnrlProtocolFilteringRowStatus | read-write | current | A status can be destroy, active or createAndGo |
| 1.3.6.1.4.1.4526.17.112.5 | NoderlSelectiveQinq | |||
| 1.3.6.1.4.1.4526.17.112.5.1 | ScalarrlSelectiveQinqListDeleteAllAction | read-write | current | Used to delete the entire Selective QinQ Table. |
| 1.3.6.1.4.1.4526.17.112.5.2 | TablerlSelectiveQinqListTable | not-accessible | current | The table specifies all Selective QinQ rules (configured by user). The entry contains a classifier and an action. |
| 1.3.6.1.4.1.4526.17.112.5.2.1 | RowrlSelectiveQinqListEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.112.5.2.1.1 | ColumnrlSelectiveQinqListDirection | read-only | current | Selective QinQ entry index |
| 1.3.6.1.4.1.4526.17.112.5.2.1.2 | ColumnrlSelectiveQinqListClassifierIfIndex | read-write | current | Selective QinQ entry classifier's interface index |
| 1.3.6.1.4.1.4526.17.112.5.2.1.3 | ColumnrlSelectiveQinqListClassifierField | read-write | current | Selective QinQ entry classifier field |
| 1.3.6.1.4.1.4526.17.112.5.2.1.4 | ColumnrlSelectiveQinqListClassifierVID | read-write | current | Selective QinQ entry classifier's vlan id |
| 1.3.6.1.4.1.4526.17.112.5.2.1.5 | ColumnrlSelectiveQinqListClassifierSrcMac3bytes | read-write | current | Selective QinQ entry classifier's 3 bytes out of MAC address |
| 1.3.6.1.4.1.4526.17.112.5.2.1.6 | ColumnrlSelectiveQinqListClassifierEtherType | read-write | current | Selective QinQ entry classifier's ethertype value |
| 1.3.6.1.4.1.4526.17.112.5.2.1.7 | ColumnrlSelectiveQinqListClassifierSrcIp | read-write | current | Selective QinQ entry classifier's IP address |
| 1.3.6.1.4.1.4526.17.112.5.2.1.8 | ColumnrlSelectiveQinqListAction | read-write | current | Selective QinQ entry action |
| 1.3.6.1.4.1.4526.17.112.5.2.1.9 | ColumnrlSelectiveQinqListActionVID | read-write | current | Selective QinQ entry action's vlan id |
| 1.3.6.1.4.1.4526.17.112.5.2.1.10 | ColumnrlSelectiveQinqListRowStatus | read-write | current | A status can be destroy, active or createAndGo |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ProtocolFilteringMap | BITS { all(0), cdp(1), vtp(2), dtp(3), udld(4), pagp(5), sstp(6) } | current | This TC describes the list of protocol to be filtered. The bit 'all(0)' indicates all Cisco protocols in range 0100.0ccc.ccc0 - 0100.0ccc.cccf The bit 'cdp(1)' indicates Cisco CDP protocol. Identified by destination mac… |
| RlIpArpInspectListNameType | DisplayString(SIZE(1..32)) | current | Ip arp inspection list name type. |
| RlIpDhcpSnoopType | INTEGER { learnedByProtocol(1), deletedByTimeout(2), static(3) } | current | Ip Dhcp Snoop entry type. |
| RlIpSourceGuardFailReason | INTEGER { noProblem(1), noResource(2), noSnoopVlan(3), trustPort(4) } | current | Ip IP Source Guard entry reason. |
| RlIpSourceGuardStatus | INTEGER { active(1), inactive(2) } | current | Ip IP Source Guard entry status. |
| RlIpSourceGuardType | INTEGER { dynamic(1), static(2) } | current | Ip IP Source Guard entry type. |
| RlSelectiveQinqAction | INTEGER { addVlan(1), overrideVlan(2), permit(3), deny(4) } | current | Selective QinQ actions |
| RlSelectiveQinqClassifierField | INTEGER { vid(1), srcMac3bytes(2), ethertype(3), srcIp(4), any(255) } MacAddr3bytes ::= OCTET STRING(SIZE(6)) | current | Selective QinQ Classifier fields |
| RlSelectiveQinqDirection | INTEGER { ingress(1), egress(2) } | current | Selective QinQ ingress/egress rule |