NETGEAR-RADLAN-TIMESYNCHRONIZATION-MIB
173 objects
The MIB module describes the private MIB for SNTP & TIME definitions.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| NETGEAR-RADLAN-MIB | rnd |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.92 | IdentityrlTimeSynchronization | The MIB module describes the private MIB for SNTP & TIME definitions. | ||
| 1.3.6.1.4.1.4526.17.92.1 | NoderlTimeSyncMethodMode | |||
| 1.3.6.1.4.1.4526.17.92.1.1 | ScalarrlTimeSyncMibVersion | read-only | current | TimeSync Mib Version. |
| 1.3.6.1.4.1.4526.17.92.1.2 | ScalarrndTimeSyncManagedTime | read-write | current | The time will be sent in the format hhmmss |
| 1.3.6.1.4.1.4526.17.92.1.3 | ScalarrndTimeSyncManagedDate | read-write | current | The date will be sent in the format ddmmyy |
| 1.3.6.1.4.1.4526.17.92.1.4 | ScalarrndTimeSyncManagedDateTime | read-write | current | The date and time will be sent in the format ddmmyyhhmmss |
| 1.3.6.1.4.1.4526.17.92.1.5 | ScalarrlTimeSyncMethod | read-write | current | Method to be used for time synchronization in the device. |
| 1.3.6.1.4.1.4526.17.92.1.6 | ScalarrlTimeZone | read-write | current | Offset from Greenwich time (format [+/-]hh:mm). |
| 1.3.6.1.4.1.4526.17.92.1.7 | ScalarrlTimeZoneCode | read-write | current | Code definition for current TimeZone. |
| 1.3.6.1.4.1.4526.17.92.1.8 | ScalarrlDaylightSavingTimeMode | read-write | current | Daylight Saving Time - Recurring/Date/None. |
| 1.3.6.1.4.1.4526.17.92.1.9 | ScalarrlDaylightSavingTimeStart | read-write | current | Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh… |
| 1.3.6.1.4.1.4526.17.92.1.10 | ScalarrlDaylightSavingTimeEnd | read-write | current | Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh… |
| 1.3.6.1.4.1.4526.17.92.1.11 | ScalarrlDaylightSavingTimeOffset | read-write | current | Daylight Saving Time - The number of minutes to add to the clock during summer time. |
| 1.3.6.1.4.1.4526.17.92.1.12 | ScalarrlDaylightSavingTimeCode | read-write | current | Code definition for current Daylight Saving Time. |
| 1.3.6.1.4.1.4526.17.92.1.13 | ScalarrlTZDSTOffset | read-only | current | Local Time Zone and Daylight Saving Time offset in seconds. |
| 1.3.6.1.4.1.4526.17.92.1.14 | ScalarrlTimeZoneName | read-write | current | Human readable string describing Local Time Zone and Daylight Saving Time. |
| 1.3.6.1.4.1.4526.17.92.1.15 | TablerlTimeZoneTable | not-accessible | current | TimeZone information. |
| 1.3.6.1.4.1.4526.17.92.1.15.1 | RowrlTimeZoneEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.1 | ColumnrlTimeZoneIndex | not-accessible | current | Entry index. A row with index 2 will be existing in case the DHCP timezone is supported, and will contain Timezone and Summertime dynamic values. Using index 2… |
| 1.3.6.1.4.1.4526.17.92.1.15.1.2 | ColumnrlTimeZoneTimeSyncMethod | read-write | current | Method to be used for time synchronization in the device. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.3 | ColumnrlTimeZoneTimeZoneOffset | read-write | current | Offset from Greenwich time (format [+/-]hh:mm). |
| 1.3.6.1.4.1.4526.17.92.1.15.1.4 | ColumnrlTimeZoneTimeZoneCode | read-write | current | Code definition for current TimeZone. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.5 | ColumnrlTimeZoneDaylightSavingTimeMode | read-write | current | Daylight Saving Time - Recurring/Date/None. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.6 | ColumnrlTimeZoneDaylightSavingTimeStart | read-write | current | Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh… |
| 1.3.6.1.4.1.4526.17.92.1.15.1.7 | ColumnrlTimeZoneDaylightSavingTimeEnd | read-write | current | Daylight Saving Time start date. In recurring mode (format 1): week wday month hh:mm In recurring mode (format 2): RJul n hh:mm In date mode: month day year hh… |
| 1.3.6.1.4.1.4526.17.92.1.15.1.8 | ColumnrlTimeZoneDaylightSavingTimeOffset | read-write | current | Daylight Saving Time - The number of minutes to add to the clock during summer time. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.9 | ColumnrlTimeZoneDaylightSavingTimeCode | read-write | current | Code definition for current Daylight Saving Time. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.10 | ColumnrlTimeZoneTZDSTOffset | read-only | current | Local Time Zone and Daylight Saving Time offset in seconds. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.11 | ColumnrlTimeZoneTimeZoneName | read-write | current | Human readable string describing Local Time Zone and Daylight Saving Time. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.12 | ColumnrlTimeZoneDataType | read-only | current | The type of data in this entry: static or dynamic. |
| 1.3.6.1.4.1.4526.17.92.1.15.1.13 | ColumnrlTimeZoneDataSourceIfIndex | read-write | current | IfIndex of the interface through which the dynamic data of this row has been learned. The value of this field will be 0 if rlTimeZoneTimeDataType is static (si… |
| 1.3.6.1.4.1.4526.17.92.1.15.1.14 | ColumnrlTimeZoneDataDynamicConfSource | read-write | current | The source of dynamic data in this entry, for example: dhcpv4. Values other than 'none' are relevant only for dynamic entry. |
| 1.3.6.1.4.1.4526.17.92.1.16 | ScalarrlClockStatus | read-only | current | Current status of the clock. The value 'invalid' means time is meaninglesss, since it has neither been manually configured nor achieved as a result of SNTP syn… |
| 1.3.6.1.4.1.4526.17.92.1.17 | ScalarrlDhcpTimezoneOptionEnabled | read-write | current | Specifies whether the DHCP Timezone option (DHCPv4 option 100) is supported in the system. Setting this value to FALSE, will clear Timezone and Summertime dyna… |
| 1.3.6.1.4.1.4526.17.92.1.18 | ScalarrlAutomaticClockSetFromPCEnabled | read-write | current | Specifies whether automatic set of time and date is permitted from connected host PC. The feature is meant to be used in order to initialize the clock after re… |
| 1.3.6.1.4.1.4526.17.92.1.19 | ScalarrlTimeAndDateHaveBeenSet | read-only | current | Indicates whether the time and date have been set in the device, manually or through SNTP synchronization. If only time has been set, the value of this MIB wil… |
| 1.3.6.1.4.1.4526.17.92.2 | NoderlSntpNtpClient | |||
| 1.3.6.1.4.1.4526.17.92.2.1 | NoderlSntpNtpConfig | |||
| 1.3.6.1.4.1.4526.17.92.2.1.1 | ScalarrlSntpNtpMibVersion | read-only | current | SntpNtp Mib Version. |
| 1.3.6.1.4.1.4526.17.92.2.1.2 | ScalarrlSntpNtpConfigMode | read-only | current | Current configuration operational mode of SNTP/NTP client. |
| 1.3.6.1.4.1.4526.17.92.2.1.3 | ScalarrlSntpNtpConfigSysStratum | read-only | current | The stratum of the local clock. If the value is set to 1, i.e., this is a primary reference, then the Primary-Clock procedure described in Section 3.4.6, in RF… |
| 1.3.6.1.4.1.4526.17.92.2.1.4 | ScalarrlSntpNtpConfigPollInterval | read-write | current | Period of time (in seconds) between succesive attempts to perform an update via SNTP. |
| 1.3.6.1.4.1.4526.17.92.2.1.5 | ScalarrlSntpNtpConfigPrimaryPollSrvAddr | read-only | current | Ip Address of a trusted SNTP server for polling. |
| 1.3.6.1.4.1.4526.17.92.2.1.6 | ScalarrlSntpNtpConfigPrimaryPollSrvMrid | read-only | current | The mrid of the primary server. |
| 1.3.6.1.4.1.4526.17.92.2.1.7 | ScalarrlSntpNtpConfigPrimaryPollSrvIfIndex | read-only | current | The interface addressed of the primary server. |
| 1.3.6.1.4.1.4526.17.92.2.1.8 | ScalarrlSntpNtpConfigPrimaryPollSrvStratum | read-only | current | The stratum of the primary polling server. |
| 1.3.6.1.4.1.4526.17.92.2.1.9 | ScalarrlSntpNtpConfigSyncSrvAddr | read-only | current | Ip Address of the synced server. |
| 1.3.6.1.4.1.4526.17.92.2.1.10 | ScalarrlSntpNtpConfigSyncSrvMrid | read-only | current | The mrid of the synced server. |
| 1.3.6.1.4.1.4526.17.92.2.1.11 | ScalarrlSntpNtpConfigSyncSrvIfIndex | read-only | current | The interface addressed of the synced server. |
| 1.3.6.1.4.1.4526.17.92.2.1.12 | ScalarrlSntpNtpConfigSyncSrvType | read-only | current | Synced server type. |
| 1.3.6.1.4.1.4526.17.92.2.1.13 | ScalarrlSntpNtpConfigSyncSrvStratum | read-only | current | The stratum of the synced server. |
| 1.3.6.1.4.1.4526.17.92.2.1.14 | ScalarrlSntpNtpConfigRetryTimeout | read-only | current | SNTP/NTP requests Retry Interval. |
| 1.3.6.1.4.1.4526.17.92.2.1.15 | ScalarrlSntpNtpConfigRetryCnt | read-only | current | SNTP/NTP requests Retry Count. |
| 1.3.6.1.4.1.4526.17.92.2.1.16 | TablerlSntpNtpConfigSrvTable | not-accessible | current | A table containing information about config servers. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1 | RowrlSntpNtpConfigSrvEntry | not-accessible | current | Entry in rlSntpNtpConfigSrvTable. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1.1 | ColumnrlSntpNtpConfigSrvEntryType | not-accessible | current | Server type: Synchronize Server or Primary Poll Server. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1.2 | ColumnrlSntpNtpConfigSrvInetAddressType | read-only | current | Server inet address type. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1.3 | ColumnrlSntpNtpConfigSrvInetAddress | read-only | current | Server inet address. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1.4 | ColumnrlSntpNtpConfigSrvMrid | read-only | current | The mrid of the server. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1.5 | ColumnrlSntpNtpConfigSrvIfIndex | read-only | current | The interface addressed of the server. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1.6 | ColumnrlSntpNtpConfigSrvSyncType | read-only | current | The type of synchronization. |
| 1.3.6.1.4.1.4526.17.92.2.1.16.1.7 | ColumnrlSntpNtpConfigSrvStratum | read-only | current | The stratum of the synced server. |
| 1.3.6.1.4.1.4526.17.92.2.2 | NoderlSntpConfig | |||
| 1.3.6.1.4.1.4526.17.92.2.2.1 | ScalarrlSntpClientMode | read-only | current | Current operational mode of SNTP client. |
| 1.3.6.1.4.1.4526.17.92.2.2.2 | ScalarrlSntpUnicastAdminState | read-write | current | SNTP Unicast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled… |
| 1.3.6.1.4.1.4526.17.92.2.2.3 | ScalarrlSntpBroadcastAdminState | read-write | current | SNTP Broadcast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabl… |
| 1.3.6.1.4.1.4526.17.92.2.2.4 | ScalarrlSntpAnycastAdminState | read-write | current | SNTP Anycast Administrative state - Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled… |
| 1.3.6.1.4.1.4526.17.92.2.2.5 | ScalarrlSntpUnicastPollState | read-write | current | SNTP Unicast poll state - TRUE for polled. |
| 1.3.6.1.4.1.4526.17.92.2.2.6 | ScalarrlSntpBroadcastPollState | read-write | current | SNTP Broadcast poll state - TRUE for polled. |
| 1.3.6.1.4.1.4526.17.92.2.2.7 | ScalarrlSntpAnycastPollState | read-write | current | SNTP Anycast poll state - TRUE for polled. |
| 1.3.6.1.4.1.4526.17.92.2.2.8 | ScalarrlSntpAuthenticationState | read-write | current | SNTP authentication state- Enable/Disable SNTP. |
| 1.3.6.1.4.1.4526.17.92.2.2.9 | ScalarrlTimeValidFlag | read-write | current | Is time valid. |
| 1.3.6.1.4.1.4526.17.92.2.2.10 | TablerlSntpConfigBroadcastTable | not-accessible | current | A table containing broadcast mode information per interface. |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1 | RowrlSntpBroadcastEntry | not-accessible | current | Private paramters for interface: sntp status, broadcast mode. |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.1 | ColumnrlSntpBroadcastIfIndex | not-accessible | current | The interface addressed by this entry. |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.2 | ColumnrlSntpBroadcastIfAdminState | read-write | current | SNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled… |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.3 | ColumnrlSntpBroadcastMode | read-write | current | SNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (w… |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.4 | ColumnrlSntpBroadcastPolled | read-write | current | TRUE if participating in polling cycle, else FALSE. |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.5 | ColumnrlSntpBroadcastAddress | read-only | current | Ip Address of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.6 | ColumnrlSntpBroadcastStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.7 | ColumnrlSntpBroadcastLastResp | read-only | current | SNTP Broadcast Last Response Time |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.8 | ColumnrlSntpBroadcastStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - ser… |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.9 | ColumnrlSntpBroadcastOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.10 | ColumnrlSntpBroadcastDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.4526.17.92.2.2.10.1.11 | ColumnrlSntpBroadcastRowStatus | read-write | current | The Status of this SNTP broadcast interface information. |
| 1.3.6.1.4.1.4526.17.92.2.2.11 | TablerlSntpConfigAnycastTable | not-accessible | current | A table containing anycast information per interface. |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1 | RowrlSntpAnycastEntry | not-accessible | current | Private paramters for interface: server info. |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.1 | ColumnrlSntpAnycastIfIndex | not-accessible | current | The interface addressed by this entry. |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.2 | ColumnrlSntpAnycastAddress | read-only | current | Ip Address of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.3 | ColumnrlSntpAnycastStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.4 | ColumnrlSntpAnycastLastResp | read-only | current | SNTP Anycast Last Response Time |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.5 | ColumnrlSntpAnycastStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - serve… |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.6 | ColumnrlSntpAnycastOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.7 | ColumnrlSntpAnycastDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.4526.17.92.2.2.11.1.8 | ColumnrlSntpAnycastRowStatus | read-write | current | The Status of this SNTP anycast interface information. |
| 1.3.6.1.4.1.4526.17.92.2.2.12 | TablerlSntpConfigServerTable | not-accessible | current | A table containing trusted SNTP servers to be queried in unicast or broadcast mode. |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1 | RowrlSntpServerEntry | not-accessible | current | A trusted server. |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.1 | ColumnrlSntpServerAddress | not-accessible | current | Ip Address of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.2 | ColumnrlSntpServerPolled | read-write | current | TRUE if participating in polling cycle, else FALSE. |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.3 | ColumnrlSntpServerStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.4 | ColumnrlSntpServerLastResp | read-only | current | SNTP Server Last Response Time |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.5 | ColumnrlSntpServerStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server… |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.6 | ColumnrlSntpServersOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.7 | ColumnrlSntpServersDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.8 | ColumnrlSntpServersKeyIdentifier | read-write | current | Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done. |
| 1.3.6.1.4.1.4526.17.92.2.2.12.1.9 | ColumnrlSntpServerRowStatus | read-write | current | The Status of this SNTP server information. |
| 1.3.6.1.4.1.4526.17.92.2.2.13 | TablerlSntpConfigAuthenticationTable | not-accessible | current | A table authentication keys. |
| 1.3.6.1.4.1.4526.17.92.2.2.13.1 | RowrlSntpAuthenticationEntry | not-accessible | current | Keys information for authenticationof NTP packets. |
| 1.3.6.1.4.1.4526.17.92.2.2.13.1.1 | ColumnrlSntpAuthenticationKeyID | read-write | current | The key identifier. Valid rabge for key identifier is 1-4294967295. |
| 1.3.6.1.4.1.4526.17.92.2.2.13.1.2 | ColumnrlSntpAuthenticationKeyValue | read-write | current | Key value. |
| 1.3.6.1.4.1.4526.17.92.2.2.13.1.3 | ColumnrlSntpAuthenticationKeyState | read-write | current | Authentication key state - Enable/Disable key. |
| 1.3.6.1.4.1.4526.17.92.2.2.13.1.4 | ColumnrlSntpAuthenticationRowStatus | read-write | current | The Status of this Authentication key information. |
| 1.3.6.1.4.1.4526.17.92.2.2.14 | ScalarrlSntpPort | read-write | current | User defined SNTP port. |
| 1.3.6.1.4.1.4526.17.92.2.2.15 | TablerlSntpConfigBroadcastInetTable | not-accessible | current | A table containing broadcast mode information per interface. |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1 | RowrlSntpBroadcastInetEntry | not-accessible | current | Private paramters for interface: sntp status, broadcast mode. |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.1 | ColumnrlSntpBroadcastInetIfIndex | not-accessible | current | The interface addressed by this entry. |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.2 | ColumnrlSntpBroadcastInetIfAdminState | read-write | current | SNTP interface Adminstrative state- Enable/Disable SNTP. In case of reinitializing polling or time synchronization this MIB is modified. The MIB can be enabled… |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.3 | ColumnrlSntpBroadcastInetMode | read-write | current | SNTP/NTP Broadcast Mode. none - no broadcast SNTP packets are received or sent. Receive - host only receive SNTP packets that were sent to broadcast address (w… |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.4 | ColumnrlSntpBroadcastInetPolled | read-write | current | TRUE if participating in polling cycle, else FALSE. |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.5 | ColumnrlSntpBroadcastInetAddressType | read-only | current | Inet Address Type of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.6 | ColumnrlSntpBroadcastInetAddress | read-only | current | Inet Address of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.7 | ColumnrlSntpBroadcastInetStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.8 | ColumnrlSntpBroadcastInetLastResp | read-only | current | SNTP Broadcast Last Response Time |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.9 | ColumnrlSntpBroadcastInetStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Broadcast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - ser… |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.10 | ColumnrlSntpBroadcastInetOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.11 | ColumnrlSntpBroadcastInetDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.4526.17.92.2.2.15.1.12 | ColumnrlSntpBroadcastInetRowStatus | read-write | current | The Status of this SNTP broadcast interface information. |
| 1.3.6.1.4.1.4526.17.92.2.2.16 | TablerlSntpConfigAnycastInetTable | not-accessible | current | A table containing anycast information per interface. |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1 | RowrlSntpAnycastInetEntry | not-accessible | current | Private paramters for interface: server info. |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.1 | ColumnrlSntpAnycastInetIfIndex | not-accessible | current | The interface addressed by this entry. |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.2 | ColumnrlSntpAnycastInetAddressType | read-only | current | Inet Address Type of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.3 | ColumnrlSntpAnycastInetAddress | read-only | current | Inet Address of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.4 | ColumnrlSntpAnycastInetStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.5 | ColumnrlSntpAnycastInetLastResp | read-only | current | SNTP Anycast Last Response Time |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.6 | ColumnrlSntpAnycastInetStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Anycast. unknown - requests were not sent yet. inProcess - replies were not received yet. up - serve… |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.7 | ColumnrlSntpAnycastInetOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.8 | ColumnrlSntpAnycastInetDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.4526.17.92.2.2.16.1.9 | ColumnrlSntpAnycastInetRowStatus | read-write | current | The Status of this SNTP anycast interface information. |
| 1.3.6.1.4.1.4526.17.92.2.2.17 | TablerlSntpConfigServerInetTable | not-accessible | current | A table containing trusted SNTP servers to be queried in unicast or broadcast mode. |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1 | RowrlSntpServerInetEntry | not-accessible | current | A trusted server. |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.1 | ColumnrlSntpServerInetAddressType | not-accessible | current | Inet Address Type of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.2 | ColumnrlSntpServerInetAddress | not-accessible | current | Inet Address of a trusted SNTP server. |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.3 | ColumnrlSntpServerInetPolled | read-write | current | TRUE if participating in polling cycle, else FALSE. |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.4 | ColumnrlSntpServerInetStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.5 | ColumnrlSntpServerInetLastResp | read-only | current | SNTP Server Last Response Time |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.6 | ColumnrlSntpServerInetStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server… |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.7 | ColumnrlSntpServerInetOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.8 | ColumnrlSntpServerInetDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.9 | ColumnrlSntpServerInetKeyIdentifier | read-write | current | Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done. |
| 1.3.6.1.4.1.4526.17.92.2.2.17.1.10 | ColumnrlSntpServerInetRowStatus | read-write | current | The Status of this SNTP server information. |
| 1.3.6.1.4.1.4526.17.92.2.2.18 | TablerlSntpAllServerInetTable | not-accessible | current | A table containing all SNTP servers (for example: statically configured, dynamically configured) to be queried in unicast or broadcast mode. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1 | RowrlSntpAllServerInetEntry | not-accessible | current | A server entry. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.1 | ColumnrlSntpAllServerSource | not-accessible | current | The SNTP server source: static means manually defined, dhcpv6 means learnt from DHCP. Only static entries are stored in CDB. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.2 | ColumnrlSntpAllServerIfIndex | not-accessible | current | The ifIndex from which the SNTP server configuration was received (for dhcpv6 configurations). For static entries the value of this field will always be 1. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.3 | ColumnrlSntpAllServerPreference | not-accessible | current | The preference of SNTP server (for dhcpv6 configurations). For static entries the value of this field will always be 0. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.4 | ColumnrlSntpAllServerInetAddressType | not-accessible | current | SNTP server inet address type. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.5 | ColumnrlSntpAllServerInetAddress | not-accessible | current | SNTP server inet address. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.6 | ColumnrlSntpAllServerInetPolled | read-only | current | TRUE if participating in polling cycle, else FALSE. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.7 | ColumnrlSntpAllServerInetStratum | read-only | current | The stratum of this server. |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.8 | ColumnrlSntpAllServerInetLastResp | read-only | current | SNTP Server Last Response Time |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.9 | ColumnrlSntpAllServerInetStatus | read-only | current | The Operational State of the remote IP Address of the SNTP Server. unknown - requests were not sent yet. inProcess - replies were not received yet. up - server… |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.10 | ColumnrlSntpAllServerInetOffset | read-only | current | The estimated offset of the server's clock relative to the local clock, in seconds. The host determines the value of this object using the algorithm described … |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.11 | ColumnrlSntpAllServerInetDelay | read-only | current | The estimated round-trip delay of the server's clock relative to the local clock over the network path between them, in seconds. The host determines the value … |
| 1.3.6.1.4.1.4526.17.92.2.2.18.1.12 | ColumnrlSntpAllServerInetKeyIdentifier | read-write | current | Authentication key identifier. The valid range is 1-4294967295. Value zero, means no authentication is being done. |
| 1.3.6.1.4.1.4526.17.92.2.2.19 | ScalarrlSntpRestoreDefaultServers | read-write | current | Setting this scalar to true restores sntp default unicast servers. Meaning: all manually configured servers are deleted, and the default SNTP servers are recre… |
| 1.3.6.1.4.1.4526.17.92.2.3 | NoderlNtpConfig |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NTPSignedTimeValue | OCTET STRING (SIZE (4)) | current | The time in seconds that could represent signed quantities like time delay with respect to some source. This textual-convention is specific to RADLAN implementation of NTP where 32-bit integers are used for such quantit… |
| NTPStratum | Integer32 (0..255) | current | Indicates the stratum of the clock. The stratum defines the accuracy of a time server. Higher the stratum, lower the accuracy. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, seco… |
| NTPTimeStamp | OCTET STRING (SIZE (8)) | current | NTP timestamps are represented as a 64-bit unsigned fixed-point number, in seconds relative to 00:00 on 1 January 1900. The integer part is in the first 32 bits and the fraction part is in the last 32 bits. |
| RlDaylightSavingTimeMode | INTEGER { recurring(1), date(2), none(3) } | current | Daylight Saving Time - Recurring/Date/None. |
| RlSntpNtpSyncEntryType | INTEGER { primaryPollSrv(1), syncSrv(2) } | current | Entry in rlSntpNtpConfigSrvTable. |
| RlSntpNtpSyncType | INTEGER { none(1), unicast(2), anycast(3), broadcast(4) } | current | Method to be used for time synchronization in the device. |
| RlTimeSyncMethod | INTEGER { none(1), sntp(2), ntp(3) } | current | Method to be used for time synchronization in the device. |