NETGEAR-RADLAN-TRUNK-MIB
38 objects
The private MIB module definition for trunk support in Radlan devices.
Imported Objects
| IEEE8023-LAG-MIB | dot3adAggIndex dot3adAggPortIndex |
| NETGEAR-RADLAN-MIB | rnd |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.65 | IdentityrlDot3adAgg | The private MIB module definition for trunk support in Radlan devices. | ||
| 1.3.6.1.4.1.4526.17.65.1 | ScalarrlDot3adAggMibVersion | read-only | current | MIB's version, the current version is 1. |
| 1.3.6.1.4.1.4526.17.65.2 | TablerlDot3adAggBalanceTable | not-accessible | current | An entry of this table specifies a balancing criterion used for the corresponding dot3adAggIndex. A criterion configured in this table is used to distribute th… |
| 1.3.6.1.4.1.4526.17.65.2.1 | RowrlDot3adAggBalanceEntry | not-accessible | current | A list of information for each dot3adAggIndex. |
| 1.3.6.1.4.1.4526.17.65.2.1.1 | ColumnrlDot3adAggBalanceForwardType | read-only | current | A Forwarding type: Bridging or Routing. |
| 1.3.6.1.4.1.4526.17.65.2.1.2 | ColumnrlDot3adAggBalanceLayer | read-write | current | A Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3. |
| 1.3.6.1.4.1.4526.17.65.2.1.3 | ColumnrlDot3adAggBalanceUsedAddresses | read-write | current | Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it). |
| 1.3.6.1.4.1.4526.17.65.2.1.4 | ColumnrlDot3adAggBalanceBroadcastType | read-write | current | Specifies a balancing criterion used for L2 broadcast and unknown frames: common: a link allocated for broadcast and unknown frames is used for unicast frames … |
| 1.3.6.1.4.1.4526.17.65.3 | ScalarrlDot3adAggNumOfTrunks | read-only | current | The number of trunks supported by the device. |
| 1.3.6.1.4.1.4526.17.65.4 | ScalarrlDot3adAggMaxPortsInTrunks | read-only | current | The maximun number of ports in a trunk. |
| 1.3.6.1.4.1.4526.17.65.5 | ScalarrlDot3adAggTrunkCreationSupport | read-write | current | Specifies if there is support to rldot3adAggCreationTable, and the type of the support: supportedTrunkOrLacp - ports that are members in some trunk are belongs… |
| 1.3.6.1.4.1.4526.17.65.6 | TablerlDot3adAggCreationTable | not-accessible | current | An entry of this table is for creation of an aggregator for the corresponding dot3adAggIndex, when the value of the rlDot3adAggCreationSupport is diffrent from… |
| 1.3.6.1.4.1.4526.17.65.6.1 | RowrlDot3adAggCreationEntry | not-accessible | current | An information for each dot3adAggIndex. |
| 1.3.6.1.4.1.4526.17.65.6.1.1 | ColumnrlDot3adAggCreationTrunk | read-write | current | The aggregator can aggregate ports in manual configuration. |
| 1.3.6.1.4.1.4526.17.65.6.1.2 | ColumnrlDot3adAggCreationLacp | read-write | current | The aggregator can aggregate ports by lacp. |
| 1.3.6.1.4.1.4526.17.65.7 | ScalarrlDot3adAggLoadBalancingPerTrunk | read-only | current | Specifies if load balancing is defined per trunk or per device. |
| 1.3.6.1.4.1.4526.17.65.8 | TablerlDot3adAggPortLacpTable | not-accessible | current | An entry of this table specifies lacp protocol state and statistics for the corresponding dot3adAggPortIndex. |
| 1.3.6.1.4.1.4526.17.65.8.1 | RowrlDot3adAggPortLacpEntry | not-accessible | current | A list of information for each dot3adAggPortIndex. |
| 1.3.6.1.4.1.4526.17.65.8.1.1 | ColumnrlDot3adAggPortLacpPdusRx | read-only | current | The number of valid LACPDUs received on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.4526.17.65.8.1.2 | ColumnrlDot3adAggPortLacpPDUsTx | read-only | current | The number of LACPDUs transmitted on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.4526.17.65.8.1.3 | ColumnrlDot3adAggPortLacpRxState | read-only | current | This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine … |
| 1.3.6.1.4.1.4526.17.65.8.1.4 | ColumnrlDot3adAggPortLacpMuxState | read-only | current | This attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in … |
| 1.3.6.1.4.1.4526.17.65.8.1.5 | ColumnrlDot3adAggPortLacpPeriodicState | read-only | current | This attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state… |
| 1.3.6.1.4.1.4526.17.65.8.1.6 | ColumnrlDot3adAggPortLacpSelected | read-only | current | This attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the… |
| 1.3.6.1.4.1.4526.17.65.8.1.7 | ColumnrlDot3adAggPortLacpReady | read-only | current | A read-only Boolean value indicating whether the Aggregation Port is in the WAITING state in the Mux state machine and its wait_while_timer has expired ('TRUE'… |
| 1.3.6.1.4.1.4526.17.65.8.1.8 | ColumnrlDot3adAggPortLacpPortMoved | read-only | current | A read-only Boolean value indicating whether the Partner_Oper_System or Partner_Oper_Port_Number in use by the Aggregation Port has been changed in an incoming… |
| 1.3.6.1.4.1.4526.17.65.8.1.9 | ColumnrlDot3adAggPortLacpNNT | read-only | current | A read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be remind… |
| 1.3.6.1.4.1.4526.17.65.8.1.10 | ColumnrlDot3adAggPortLacpPeriodicTxTimer | read-only | current | The amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only. |
| 1.3.6.1.4.1.4526.17.65.8.1.11 | ColumnrlDot3adAggPortLacpCurrentWhileTimer | read-only | current | The amount of time in seconds remaining before the Current While timer will expire. This value is read-only. |
| 1.3.6.1.4.1.4526.17.65.8.1.12 | ColumnrlDot3adAggPortLacpWaitWhileTimer | read-only | current | The amount of time in seconds remaining before the Wait While timer will expire. This value is read-only. |
| 1.3.6.1.4.1.4526.17.65.9 | ScalarrlDot3adAggLacpMembershipRestrictionsSupport | read-write | current | Specifies if there is support to rlDot3adAggLacpMembershipRestrictionsTable. |
| 1.3.6.1.4.1.4526.17.65.10 | TablerlDot3adAggLacpMembershipRestrictionsTable | not-accessible | current | An entry of this table specifies membership restrictions for ports that lacp is enbaled on them, and try to attach to the corresponding dot3adAggIndex. |
| 1.3.6.1.4.1.4526.17.65.10.1 | RowrlDot3adAggLacpMembershipRestrictionsEntry | not-accessible | current | A list of information for each dot3adAggIndex. |
| 1.3.6.1.4.1.4526.17.65.10.1.1 | ColumnrlDot3adAggLacpMembershipRestrictionsPartnerAdminKey | read-write | current | This variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. |
| 1.3.6.1.4.1.4526.17.65.10.1.2 | ColumnrlDot3adAggLacpMembershipRestrictionsSpeedAdminMode | read-write | current | This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value … |
| 1.3.6.1.4.1.4526.17.65.10.1.3 | ColumnrlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId | read-write | current | This variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been s… |
| 1.3.6.1.4.1.4526.17.65.10.1.4 | ColumnrlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority | read-write | current | This variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set. |
| 1.3.6.1.4.1.4526.17.65.10.1.5 | ColumnrlDot3adAggLacpMembershipRestrictionsIndividualAggregator | read-write | current | This variable specifies if the lacp aggregator represents an Aggregate ('FALSE') or an Individual link ('TRUE'). |