NETGEAR-RADLAN-iscsi-MIB
44 objects
No module-level DESCRIPTION found.
Imported Objects
| NETGEAR-RADLAN-MIB | rnd |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.126 | NoderlIscsiSnoop | |||
| 1.3.6.1.4.1.4526.17.126.1 | ScalarrlIscsiSnoopEnable | read-write | current | Enable/Disable iSCSI Snooping in the switch. |
| 1.3.6.1.4.1.4526.17.126.2 | ScalarrlIscsiSnoopAgingTimeOut | read-write | current | The time in seconds that should pass before session aging out after the last frame transmitted for the session. |
| 1.3.6.1.4.1.4526.17.126.3 | TablerlIscsiSnoopQosTable | not-accessible | current | The (conceptual) table for configuration of iSCSI QOS. |
| 1.3.6.1.4.1.4526.17.126.3.1 | RowrlIscsiSnoopQosEntry | not-accessible | current | An entry (conceptual row) in the rlIscsiSnoopQosTable. |
| 1.3.6.1.4.1.4526.17.126.3.1.1 | ColumnrlIscsiSnoopQosKey | not-accessible | current | Key of the rlIscsiSnoopQosTable table |
| 1.3.6.1.4.1.4526.17.126.3.1.2 | ColumnrlIscsiSnoopQosType | read-write | current | Current type of QoS of iSCSI packets |
| 1.3.6.1.4.1.4526.17.126.3.1.4 | ColumnrlIscsiSnoopQosValue | read-write | current | The value of VPT or DSCP, depends on rlIscsiSnoopQosType, that will be assigned to each iSCSI packet. The range of VPT value is 0..7. The range of DSCP value i… |
| 1.3.6.1.4.1.4526.17.126.3.1.5 | ColumnrlIscsiSnoopQosRemark | read-write | current | Whether iSCSI frames with the configured VPT/DSCP when egressing the switch. |
| 1.3.6.1.4.1.4526.17.126.4 | TablerlIscsiSnoopTargetConfigTable | not-accessible | current | The (conceptual) table for configuration of iSCSI target TCP port number IP address and name. |
| 1.3.6.1.4.1.4526.17.126.4.1 | RowrlIscsiSnoopTargetConfigEntry | not-accessible | current | An entry (conceptual row) in the rlIscsiSnoopTargetPortConfigTable. |
| 1.3.6.1.4.1.4526.17.126.4.1.1 | ColumnrlIscsiSnoopTargetConfigTcpPort | not-accessible | current | The TCP port of configured target. |
| 1.3.6.1.4.1.4526.17.126.4.1.3 | ColumnrlIscsiSnoopTargetConfigAddr | not-accessible | current | Specifies the target address. If the target address is ignored the address should be 0.0.0.0 |
| 1.3.6.1.4.1.4526.17.126.4.1.4 | ColumnrlIscsiSnoopTargetConfigName1 | read-write | current | The first part of target name |
| 1.3.6.1.4.1.4526.17.126.4.1.5 | ColumnrlIscsiSnoopTargetConfigName2 | read-write | current | The second part of target name |
| 1.3.6.1.4.1.4526.17.126.4.1.6 | ColumnrlIscsiSnoopTargetConfigStatus | read-create | current | The status of the target. It's used to add/delete a target |
| 1.3.6.1.4.1.4526.17.126.5 | TablerlIscsiSnoopTargetNameTable | not-accessible | current | A table that contains iSCSI target names. It is indexed by Target Name ID. |
| 1.3.6.1.4.1.4526.17.126.5.1 | RowrlIscsiSnoopTargetNameEntry | not-accessible | current | An entry (conceptual row) in the rlIscsiSnoopTargetNameTable. |
| 1.3.6.1.4.1.4526.17.126.5.1.1 | ColumnrlIscsiSnoopTargetNameId | not-accessible | current | Numerical ID of target name assigned by system. |
| 1.3.6.1.4.1.4526.17.126.5.1.2 | ColumnrlIscsiSnoopTargetName1 | read-only | current | The first part of target name |
| 1.3.6.1.4.1.4526.17.126.5.1.3 | ColumnrlIscsiSnoopTargetName2 | read-only | current | The second part of target name |
| 1.3.6.1.4.1.4526.17.126.6 | TablerlIscsiSnoopInitiatorNameTable | not-accessible | current | A table that contains iSCSI initiator names. It is indexed by Target Name ID. |
| 1.3.6.1.4.1.4526.17.126.6.1 | RowrlIscsiSnoopInitiatorNameEntry | not-accessible | current | An entry (conceptual row) in the rlIscsiSnoopInitiatorNameTable. |
| 1.3.6.1.4.1.4526.17.126.6.1.1 | ColumnrlIscsiSnoopInitiatorNameId | not-accessible | current | Numerical ID of initiator name assigned by system. |
| 1.3.6.1.4.1.4526.17.126.6.1.2 | ColumnrlIscsiSnoopInitiatorName1 | read-only | current | The first part of initiator name |
| 1.3.6.1.4.1.4526.17.126.6.1.3 | ColumnrlIscsiSnoopInitiatorName2 | read-only | current | The second part of initiator name |
| 1.3.6.1.4.1.4526.17.126.7 | TablerlIscsiSnoopSessionTable | not-accessible | current | A table that contains iSCSI sessions. It is indexed by Target Name ID, Initiator Name ID and ISID. |
| 1.3.6.1.4.1.4526.17.126.7.1 | RowrlIscsiSnoopSessionEntry | not-accessible | current | An entry (conceptual row) in the rlIscsiSnoopSessionTable. |
| 1.3.6.1.4.1.4526.17.126.7.1.1 | ColumnrlIscsiSnoopSessionISID | read-only | current | The ISID of current session. |
| 1.3.6.1.4.1.4526.17.126.7.1.2 | ColumnrlIscsiSnoopSessAgingTime | read-only | current | The aging time of current session in seconds For session not under monitor it is equal max aging time. |
| 1.3.6.1.4.1.4526.17.126.7.1.3 | ColumnrlIscsiSnoopSessionUpTime | read-only | current | Time the session exists, in seconds. |
| 1.3.6.1.4.1.4526.17.126.8 | TablerlIscsiSnoopConnectionTable | not-accessible | current | A table that contains iSCSI connections. This is indexed by Session ID and TCP connection parameters. |
| 1.3.6.1.4.1.4526.17.126.8.1 | RowrlIscsiSnoopConnectionEntry | not-accessible | current | An entry (conceptual row) in the rlIscsiSnoopConnectionTable. |
| 1.3.6.1.4.1.4526.17.126.8.1.2 | ColumnrlIscsiSnoopConnectionTargetAddr | not-accessible | current | Specifies the connection target address. |
| 1.3.6.1.4.1.4526.17.126.8.1.3 | ColumnrlIscsiSnoopConnectionTargetPort | not-accessible | current | The TCP port of connection target. |
| 1.3.6.1.4.1.4526.17.126.8.1.5 | ColumnrlIscsiSnoopConnectionInitiatorAddr | not-accessible | current | Specifies the connection initiator address. |
| 1.3.6.1.4.1.4526.17.126.8.1.6 | ColumnrlIscsiSnoopConnectionInitiatorPort | read-only | current | The TCP port of connection initiator. |
| 1.3.6.1.4.1.4526.17.126.8.1.7 | ColumnrlIscsiSnoopConnectionCreationTime | read-only | current | The value of SysUpTime at which the connection was created. |
| 1.3.6.1.4.1.4526.17.126.8.1.8 | ColumnrlIscsiSnoopConnectionLastActTime | read-only | current | The value of SysUpTime on the most recent occasion at which the counter object indexed with the value of rlIscsiSnoopConnectionCounterIndex was incremented |
| 1.3.6.1.4.1.4526.17.126.8.1.9 | ColumnrlIscsiSnoopConnectionLastPollTime | read-only | current | The value of SysUpTime on the most recent occasion at which the counter object indexed with the value of rlIscsiSnoopConnectionCounterIndex was sampled |
| 1.3.6.1.4.1.4526.17.126.8.1.10 | ColumnrlIscsiSnoopConnectionExpiryTime | read-only | current | The value of SysUpTime at which the connection should be discarded as a result of inactivity elapsed at least rlIscsiSnoopAgingTimeOut. |
| 1.3.6.1.4.1.4526.17.126.8.1.11 | ColumnrlIscsiSnoopConnectionCounterIndex | read-only | current | The index into the the connection counters table of the counter object bound to this rlIscsiSnoopConnectionEntry object. |
| 1.3.6.1.4.1.4526.17.126.9 | ScalarrlIscsiSnoopCosEnable | read-write | current | Enable/Disable iSCSI Snooping COS in the switch. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| QosType | INTEGER { vpt(0), dscp(1) } | current | Type of QoS: VPT or DSCP. |