MIB Viewer

NETGEAR-RADLAN-rlMacMulticast-MIB

127 objects
No module-level DESCRIPTION found.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType InetVersion
NETGEAR-RADLAN-DEVICEPARAMS-MIBrndErrorDesc rndErrorSeverity
NETGEAR-RADLAN-MIBrlMacMulticast rnd rndNotifications
Q-BRIDGE-MIBPortList VlanIndex
SNMPv2-SMIIpAddress NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.4526.17.0.208NotificationrlIgmpMldSnoopTriplePlayPortcurrentInformational trap indicating that a query was recieved on a triple play port.
1.3.6.1.4.1.4526.17.0.227NotificationrlbrgIgmpSnoopQrrDuplicateIPcurrentWarning trap indicating that duplicate ip\ipv6 address occured between two queries
1.3.6.1.4.1.4526.17.1NoderlMacMulticastUnregFilterFailedWarning trap indicating - Setting Mac Unregistered Filtering on port is failed. The bound variable rndErrorDesc provides the interface number.
1.3.6.1.4.1.4526.17.55.1ScalarrlMacMulticastEnableread-writecurrentEnable/Disable MAC Multicast bridging in the device.
1.3.6.1.4.1.4526.17.55.2NoderlIgmpSnoop
1.3.6.1.4.1.4526.17.55.2.1ScalarrlIgmpSnoopMibVersionread-onlycurrentMIB's version, the current version is 3. IGMP Snooping supports IGMPv3.
1.3.6.1.4.1.4526.17.55.2.2ScalarrlIgmpSnoopEnableread-writecurrentEnable/Disable IGMP Snooping in the switch.
1.3.6.1.4.1.4526.17.55.2.3ScalarrlIgmpSnoopHostAgingTimeread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable will be aged out.
1.3.6.1.4.1.4526.17.55.2.4ScalarrlIgmpSnoopRouterAgingTimeread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopInterfaceTable will be aged out.
1.3.6.1.4.1.4526.17.55.2.7TablerlIgmpSnoopVlanTablenot-accessibleobsoleteThe table listing the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports.
1.3.6.1.4.1.4526.17.55.2.7.1RowrlIgmpSnoopVlanEntrynot-accessibleobsoleteAn entry (conceptual row) in the rlIgmpSnoopVlanTable.
1.3.6.1.4.1.4526.17.55.2.7.1.1ColumnrlIgmpSnoopVlanTagread-onlyobsoleteThe tag of the VLAN for which this entry contains information for an IP Multicast Router.
1.3.6.1.4.1.4526.17.55.2.7.1.2ColumnrlIgmpSnoopVlanEnableread-writeobsoleteEnable/Disable IGMP Snooping in the vlan.
1.3.6.1.4.1.4526.17.55.2.7.1.3ColumnrlIgmpSnoopVlanRouterLearnread-writeobsoleteEnable/Disable of Learning of routers in the vlan.
1.3.6.1.4.1.4526.17.55.2.7.1.4ColumnrlIgmpSnoopVlanHostTimeOutread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.
1.3.6.1.4.1.4526.17.55.2.7.1.5ColumnrlIgmpSnoopVlanQuerierTimeOutread-writeobsoleteThe amount of time where no query is heard until querier is activated
1.3.6.1.4.1.4526.17.55.2.7.1.6ColumnrlIgmpSnoopVlanRouterTimeOutread-writeobsoleteThe amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.
1.3.6.1.4.1.4526.17.55.2.7.1.7ColumnrlIgmpSnoopVlanLeaveTimeOutread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the…
1.3.6.1.4.1.4526.17.55.2.7.1.8ColumnrlIgmpSnoopVlanIgmpVersionread-onlyobsoleteThe current IGMP protocol version running on the VLAN.
1.3.6.1.4.1.4526.17.55.2.7.1.9ColumnrlIgmpSnoopVlanRouterPortlistread-onlyobsoleteList of router ports learned dynamically on this VLAN from PIM, DVMRP, MRDISC and IGMP Query messages
1.3.6.1.4.1.4526.17.55.2.8ScalarrlIgmpSnoopIGMP224ReportsHandleread-writecurrentThis varaiable indicates whether to allow IGMP reports for groups in the 224.0.0.X range when the group address is already manually configured or to ignore.
1.3.6.1.4.1.4526.17.55.2.10TablerlIgmpSnoopMulticastTvTablenot-accessiblecurrentmulticast vlan used for this port
1.3.6.1.4.1.4526.17.55.2.10.1RowrlIgmpSnoopMulticastTvEntrynot-accessiblecurrententry of multicast ip
1.3.6.1.4.1.4526.17.55.2.10.1.1ColumnrlIgmpSnoopMulticastTvVIDread-onlycurrentSpecify the multicast ip to be used.
1.3.6.1.4.1.4526.17.55.2.10.1.2ColumnrlIgmpSnoopMulticastTvGroupread-onlycurrentSpecify the multicast ip to be used.
1.3.6.1.4.1.4526.17.55.2.10.1.3ColumnrlIgmpSnoopMulticastTvStatusread-writecurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.4526.17.55.2.11TablerlIgmpSnoopMembershipTablenot-accessiblecurrentThe table listing the IP multicast memberships.
1.3.6.1.4.1.4526.17.55.2.11.1RowrlIgmpSnoopMembershipEntrynot-accessiblecurrentAn entry (conceptual row) in the rlIgmpSnoopMembershipTable.
1.3.6.1.4.1.4526.17.55.2.11.1.1ColumnrlIgmpSnoopMembershipVlanTagread-onlycurrentThe VLAN tag for which this entry contains multicast membership information.
1.3.6.1.4.1.4526.17.55.2.11.1.2ColumnrlIgmpSnoopMembershipGroupIpAddressread-onlycurrentThe multicast group address.
1.3.6.1.4.1.4526.17.55.2.11.1.3ColumnrlIgmpSnoopMembershipSourceIpAddressread-onlycurrentThe unicast source address.
1.3.6.1.4.1.4526.17.55.2.11.1.4ColumnrlIgmpSnoopMembershipIncPortlistread-onlycurrentIncluded ports, where a report message was heard for the group (IGMP version 2|1) or group and source address (IGMP version 3).
1.3.6.1.4.1.4526.17.55.2.11.1.5ColumnrlIgmpSnoopMembershipExcPortlistread-onlycurrentExcluded ports where an exclude report message was heard for the group and source address (IGMP version 3).
1.3.6.1.4.1.4526.17.55.2.11.1.6ColumnrlIgmpSnoopMembershipExpiryTimeread-onlyobsoleteTime till entry will expire.
1.3.6.1.4.1.4526.17.55.2.11.1.7ColumnrlIgmpSnoopMembershipCompatibilityModeread-onlycurrentIGMP group compatibility mode.
1.3.6.1.4.1.4526.17.55.2.12TablerlIgmpSnoopQuerierVlanTablenot-accessiblecurrentA table that contains IGMP Snooping Querier information about every vlan. This is indexed by vlan tag.
1.3.6.1.4.1.4526.17.55.2.12.1RowrlIgmpSnoopQuerierVlanEntrynot-accessiblecurrentAn entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable.
1.3.6.1.4.1.4526.17.55.2.12.1.1ColumnrlIgmpSnoopQuerierVlanTagread-onlycurrentAn IGMP Snoop Querier entry vlan tag.
1.3.6.1.4.1.4526.17.55.2.12.1.2ColumnrlIgmpSnoopQuerierAdminEnableread-writecurrentThe desired administrative state of IGMP Snoop Querier on the vlan.
1.3.6.1.4.1.4526.17.55.2.12.1.3ColumnrlIgmpSnoopQuerierOperEnableread-onlycurrentThe current operational state of IGMP Snoop Querier on the vlan.
1.3.6.1.4.1.4526.17.55.2.12.1.4ColumnrlIgmpSnoopQuerierAdminAddrread-writecurrentThe desired IP address is being used in IGMP Snoop Querier messages on the vlan.
1.3.6.1.4.1.4526.17.55.2.12.1.5ColumnrlIgmpSnoopQuerierOperAddrread-onlycurrentThe current operational IP address is being used in IGMP Snoop Querier messages on the vlan.
1.3.6.1.4.1.4526.17.55.2.12.1.6ColumnrlIgmpSnoopQuerierAdminVersionNumberread-writecurrentThe highest version number of IGMP Snoop Querier for the vlan.
1.3.6.1.4.1.4526.17.55.2.12.1.7ColumnrlIgmpSnoopQuerierOperVersionNumberread-onlycurrentThe current operational version number of IGMP Snoop Querier for the vlan.
1.3.6.1.4.1.4526.17.55.2.12.1.8ColumnrlIgmpSnoopQuerierElectionEnableread-writecurrentWhether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the el…
1.3.6.1.4.1.4526.17.55.2.13ScalarrlIgmpSnoopQuerierEnableread-writecurrentGlobally enable/disable IGMP Snooping Querier in the switch.
1.3.6.1.4.1.4526.17.55.3ScalarrlMacMulticastMaxEntriesNumread-onlycurrentThe maximum number of Mac Multicast entries the device supports.
1.3.6.1.4.1.4526.17.55.4NoderlMacMulticastFilter
1.3.6.1.4.1.4526.17.55.4.1ScalarrlMacMulticastUnregFilterEnableread-writecurrentEach bit represent a port whether Unregistered Multicast Filtering enable
1.3.6.1.4.1.4526.17.55.5NoderlMldSnoop
1.3.6.1.4.1.4526.17.55.5.1ScalarrlMldSnoopEnableread-writecurrentEnable/Disable Mld Snooping in the switch.
1.3.6.1.4.1.4526.17.55.5.2ScalarrlMldSnoopHostAgingTimeread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlMldSnoopGroupTable will be aged out.
1.3.6.1.4.1.4526.17.55.5.3ScalarrlMldSnoopRouterAgingTimeread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlMldSnoopInterfaceTable will be aged out.
1.3.6.1.4.1.4526.17.55.5.4TablerlIgmpMldSnoopMembershipTablenot-accessiblecurrentThe table listing the IP multicast memberships.
1.3.6.1.4.1.4526.17.55.5.4.1RowrlIgmpMldSnoopMembershipEntrynot-accessiblecurrentAn entry (conceptual row) in the rlIgmpMldSnoopMembershipTable.
1.3.6.1.4.1.4526.17.55.5.4.1.1ColumnrlIgmpMldSnoopMembershipVlanTagread-onlycurrentThe VLAN tag for which this entry contains multicast membership information.
1.3.6.1.4.1.4526.17.55.5.4.1.2ColumnrlIgmpMldSnoopMembershipGroupIpAddressTyperead-onlycurrentInet type IPv4/IPv6.
1.3.6.1.4.1.4526.17.55.5.4.1.3ColumnrlIgmpMldSnoopMembershipGroupIpAddressread-onlycurrentThe multicast group address.
1.3.6.1.4.1.4526.17.55.5.4.1.4ColumnrlIgmpMldSnoopMembershipSourceIpAddressTyperead-onlycurrentInet type IPv4/IPv6.
1.3.6.1.4.1.4526.17.55.5.4.1.5ColumnrlIgmpMldSnoopMembershipSourceIpAddressread-onlycurrentThe unicast source address.
1.3.6.1.4.1.4526.17.55.5.4.1.6ColumnrlIgmpMldSnoopMembershipIncPortlistread-onlycurrentIncluded ports, where a report message was heard for the group (IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).
1.3.6.1.4.1.4526.17.55.5.4.1.7ColumnrlIgmpMldSnoopMembershipExcPortlistread-onlycurrentlist of excluded ports to which an exclude report message was heard for the group and source address (IGMPv3/MLDv2 ).
1.3.6.1.4.1.4526.17.55.5.4.1.8ColumnrlIgmpMldSnoopMembershipExpiryTimeread-onlyobsoleteTime till entry will expire.
1.3.6.1.4.1.4526.17.55.5.4.1.9ColumnrlIgmpMldSnoopMembershipCompatibilityModeread-onlycurrentIGMP/MLD group compatibility mode.
1.3.6.1.4.1.4526.17.55.5.5TablerlIgmpMldSnoopVlanTablenot-accessiblecurrentThe table lists the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports.
1.3.6.1.4.1.4526.17.55.5.5.1RowrlIgmpMldSnoopVlanEntrynot-accessiblecurrentAn entry (conceptual row) in the rlIgmpSnoopVlanTable.
1.3.6.1.4.1.4526.17.55.5.5.1.1ColumnrlIgmpMldSnoopVlanInetAddressTyperead-onlycurrentInet type ipv6/ipv4.
1.3.6.1.4.1.4526.17.55.5.5.1.2ColumnrlIgmpMldSnoopVlanTagread-onlycurrentThe tag of the VLAN for which this entry contains information for an IP Multicast Router.
1.3.6.1.4.1.4526.17.55.5.5.1.3ColumnrlIgmpMldSnoopVlanEnableread-writecurrentEnable/Disable IGMP Snooping in the vlan.
1.3.6.1.4.1.4526.17.55.5.5.1.4ColumnrlIgmpMldSnoopVlanRouterLearnread-writecurrentEnable/Disable of Learning of routers in the vlan.
1.3.6.1.4.1.4526.17.55.5.5.1.5ColumnrlIgmpMldSnoopVlanHostTimeOutread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.
1.3.6.1.4.1.4526.17.55.5.5.1.6ColumnrlIgmpMldSnoopVlanQuerierTimeOutread-writeobsoleteThe amount of time where no query is heard until querier is activated
1.3.6.1.4.1.4526.17.55.5.5.1.7ColumnrlIgmpMldSnoopVlanRouterTimeOutread-writeobsoleteThe amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.
1.3.6.1.4.1.4526.17.55.5.5.1.8ColumnrlIgmpMldSnoopVlanLeaveTimeOutread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the…
1.3.6.1.4.1.4526.17.55.5.5.1.9ColumnrlIgmpMldSnoopVlanIgmpVersionread-onlycurrentThe current IGMP protocol version running on the VLAN.
1.3.6.1.4.1.4526.17.55.5.5.1.10ColumnrlIgmpMldSnoopVlanRouterPortlistread-onlycurrentList of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN
1.3.6.1.4.1.4526.17.55.5.5.1.11ColumnrlIgmpMldSnoopVlanRouterStaticPortlistread-writecurrentList of router ports configured statically on this VLAN.
1.3.6.1.4.1.4526.17.55.5.5.1.12ColumnrlIgmpMldSnoopVlanRouterForbiddenPortlistread-writecurrentList of ports statically configured to NOT be router ports on this VLAN
1.3.6.1.4.1.4526.17.55.5.5.1.13ColumnrlIgmpMldSnoopVlanQueryOverrideread-writecurrentEnable/Disable overriding of Query values
1.3.6.1.4.1.4526.17.55.5.5.1.14ColumnrlIgmpMldSnoopVlanOperRobustnessread-onlycurrentThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. …
1.3.6.1.4.1.4526.17.55.5.5.1.15ColumnrlIgmpMldSnoopVlanOperQueryIntervalread-onlycurrentThe frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.
1.3.6.1.4.1.4526.17.55.5.5.1.16ColumnrlIgmpMldSnoopVlanOperQueryMaxResponseTimeread-onlycurrentThe maximum query response interval advertised in MGMDv2 or v3 queries on this interface.
1.3.6.1.4.1.4526.17.55.5.5.1.17ColumnrlIgmpMldSnoopVlanOperLastMemberQueryIntervalread-onlycurrentThe Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also th…
1.3.6.1.4.1.4526.17.55.5.5.1.18ColumnrlIgmpMldSnoopVlanOperLastMemberQueryCountread-onlycurrentRepresents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.
1.3.6.1.4.1.4526.17.55.5.5.1.19ColumnrlIgmpMldSnoopVlanOperStartupQueryIntervalread-onlycurrentThis variable represents the interval between General Queries sent by a Querier on startup.
1.3.6.1.4.1.4526.17.55.5.5.1.20ColumnrlIgmpMldSnoopVlanOperStartupQueryCountread-onlycurrentRepresents the number of Queries sent out on startup separated by the Startup Query Interval.
1.3.6.1.4.1.4526.17.55.5.5.1.21ColumnrlIgmpMldSnoopVlanOperHostTimeOutread-onlycurrentThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIg…
1.3.6.1.4.1.4526.17.55.5.5.1.22ColumnrlIgmpMldSnoopVlanOperRouterTimeOutread-onlycurrentThe amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * r…
1.3.6.1.4.1.4526.17.55.5.5.1.23ColumnrlIgmpMldSnoopVlanOperLeaveTimeOutread-onlycurrentThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the…
1.3.6.1.4.1.4526.17.55.5.5.1.24ColumnrlIgmpMldSnoopVlanAdminRobustnessread-writecurrentThe Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. …
1.3.6.1.4.1.4526.17.55.5.5.1.25ColumnrlIgmpMldSnoopVlanAdminQueryIntervalread-writecurrentThe frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.
1.3.6.1.4.1.4526.17.55.5.5.1.26ColumnrlIgmpMldSnoopVlanAdminQueryMaxResponseTimeread-writecurrentThe maximum query response interval advertised in MGMDv2 or v3 queries on this interface.
1.3.6.1.4.1.4526.17.55.5.5.1.27ColumnrlIgmpMldSnoopVlanAdminLastMemberQueryIntervalread-writecurrentThe Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also th…
1.3.6.1.4.1.4526.17.55.5.5.1.28ColumnrlIgmpMldSnoopVlanAdminLastMemberQueryCountread-writecurrentRepresents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. Value 0 is used …
1.3.6.1.4.1.4526.17.55.5.5.1.29ColumnrlIgmpMldSnoopVlanAdminStartupQueryIntervalread-writecurrentThis variable represents the interval between General Queries sent by a Querier on startup.
1.3.6.1.4.1.4526.17.55.5.5.1.30ColumnrlIgmpMldSnoopVlanAdminStartupQueryCountread-writecurrentRepresents the number of Queries sent out on startup separated by the Startup Query Interval.
1.3.6.1.4.1.4526.17.55.5.5.1.31ColumnrlIgmpMldSnoopVlanAdminHostTimeOutread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlI…
1.3.6.1.4.1.4526.17.55.5.5.1.32ColumnrlIgmpMldSnoopVlanAdminRouterTimeOutread-writeobsoleteThe amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * …
1.3.6.1.4.1.4526.17.55.5.5.1.33ColumnrlIgmpMldSnoopVlanAdminLeaveTimeOutread-writeobsoleteThe amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the…
1.3.6.1.4.1.4526.17.55.5.5.1.34ColumnrlIgmpMldSnoopVlanIsImmediateLeaveread-writecurrentEnable/Disable immediate leave on this Vlan
1.3.6.1.4.1.4526.17.55.5.6TablerlIgmpMldSnoopMulticastTvTablenot-accessiblecurrentmulticast vlan used for this port
1.3.6.1.4.1.4526.17.55.5.6.1RowrlIgmpMldSnoopMulticastTvEntrynot-accessiblecurrententry of multicast ip
1.3.6.1.4.1.4526.17.55.5.6.1.1ColumnrlIgmpMldSnoopMulticastTvInetAddressTyperead-onlycurrentInet type ipv6/ipv4.
1.3.6.1.4.1.4526.17.55.5.6.1.2ColumnrlIgmpMldSnoopMulticastTvVIDread-onlycurrentSpecify the multicast ip to be used.
1.3.6.1.4.1.4526.17.55.5.6.1.3ColumnrlIgmpMldSnoopMulticastTvGroupAddressTyperead-onlycurrentInet type ipv6/ipv4.
1.3.6.1.4.1.4526.17.55.5.6.1.4ColumnrlIgmpMldSnoopMulticastTvGroupread-onlycurrentSpecify the multicast ip to be used.
1.3.6.1.4.1.4526.17.55.5.6.1.5ColumnrlIgmpMldSnoopMulticastTvStatusread-writecurrentThe row status variable, used according to row installation and removal conventions.
1.3.6.1.4.1.4526.17.55.5.7TablerlMldSnoopQuerierVlanTablenot-accessiblecurrentA table that contains MLD Snooping Querier information about every vlan. This is indexed by vlan tag.
1.3.6.1.4.1.4526.17.55.5.7.1RowrlMldSnoopQuerierVlanEntrynot-accessiblecurrentAn entry (conceptual row) in the rlMldSnoopQuerierVlanTable.
1.3.6.1.4.1.4526.17.55.5.7.1.1ColumnrlMldSnoopQuerierVlanTagread-onlycurrentAn MLD Snoop Querier entry vlan tag.
1.3.6.1.4.1.4526.17.55.5.7.1.2ColumnrlMldSnoopQuerierAdminEnableread-writecurrentThe desired administrative state of MLD Snoop Querier on the vlan.
1.3.6.1.4.1.4526.17.55.5.7.1.3ColumnrlMldSnoopQuerierOperEnableread-onlycurrentThe current operational state of MLD Snoop Querier on the vlan.
1.3.6.1.4.1.4526.17.55.5.7.1.4ColumnrlMldSnoopQuerierAdminAddrInetAddressTyperead-onlycurrentInet type IPv6/IPv4.
1.3.6.1.4.1.4526.17.55.5.7.1.5ColumnrlMldSnoopQuerierAdminAddrread-writecurrentThe desired IP address is being used in MLD Snoop Querier messages on the vlan.
1.3.6.1.4.1.4526.17.55.5.7.1.6ColumnrlMldSnoopQuerierOperAddrInetAddressTyperead-onlycurrentInet type IPv6/IPv4.
1.3.6.1.4.1.4526.17.55.5.7.1.7ColumnrlMldSnoopQuerierOperAddrread-onlycurrentThe current operational IP address is being used in MLD Snoop Querier messages on the vlan.
1.3.6.1.4.1.4526.17.55.5.7.1.8ColumnrlMldSnoopQuerierAdminVersionNumberread-writecurrentThe highest version number of MLD Snoop Querier for the vlan.
1.3.6.1.4.1.4526.17.55.5.7.1.9ColumnrlMldSnoopQuerierOperVersionNumberread-onlycurrentThe current operational version number of MLD Snoop Querier for the vlan.
1.3.6.1.4.1.4526.17.55.5.7.1.10ColumnrlMldSnoopQuerierElectionEnableread-writecurrentWhether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the el…
1.3.6.1.4.1.4526.17.55.5.8ScalarrlMldSnoopQuerierEnableread-writecurrentGlobally enable/disable MLD Snooping Querier in the switch.
1.3.6.1.4.1.4526.17.55.5.9TablerlIgmpMldSnoopQuerierGlobalAddressTablenot-accessiblecurrentA table that contains IGMP/MLD Snooping Querier global address.
1.3.6.1.4.1.4526.17.55.5.9.1RowrlIgmpMldSnoopQuerierGlobalAddressEntrynot-accessiblecurrentAn entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable.
1.3.6.1.4.1.4526.17.55.5.9.1.1ColumnrlIgmpMldSnoopQuerierGlobalAddressIPVersionnot-accessiblecurrentThe IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g., IPv4 and IPv6; however, the traffic is consi…
1.3.6.1.4.1.4526.17.55.5.9.1.2ColumnrlIgmpMldSnoopQuerierGlobalAddressTyperead-onlycurrentInet type IPv6/IPv4.
1.3.6.1.4.1.4526.17.55.5.9.1.3ColumnrlIgmpMldSnoopQuerierGlobalAddressread-writecurrentThe desired address to used in IGMP/MLD Snoop Querier messages if such an address is not configured on the vlan.
Type Definitions
NameSyntaxStatusDescription
IgmpVersionINTEGER { none(0), v1(1), v2(2), v3(3) }currentIGMP version.
MldVersionINTEGER { none(0), v1(1), v2(2) }currentMLD version.
MIB Viewer