NETGEAR-RADLAN-rndMng
40 objects
The private MIB module definition for RND general management MIB.
Imported Objects
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| NETGEAR-RADLAN-MIB | rnd |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.1 | IdentityrndMng | The private MIB module definition for RND general management MIB. | ||
| 1.3.6.1.4.1.4526.17.1.1 | ScalarrndSysId | read-only | current | Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II. |
| 1.3.6.1.4.1.4526.17.1.2 | ScalarrndAction | read-write | current | This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of prop… |
| 1.3.6.1.4.1.4526.17.1.3 | ScalarrndFileName | read-write | current | The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol. |
| 1.3.6.1.4.1.4526.17.1.4 | ScalarrlSnmpVersionSupported | read-only | current | Indicates the snmp versions that are supported by this device. |
| 1.3.6.1.4.1.4526.17.1.5 | ScalarrlSnmpMibVersion | read-only | current | Indicates the snmp support version that is supported by this device. |
| 1.3.6.1.4.1.4526.17.1.6 | ScalarrlCpuUtilEnable | read-write | current | Enables measurement of the device CPU utilization. In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute and rlCpuUtilDuringLast… |
| 1.3.6.1.4.1.4526.17.1.7 | ScalarrlCpuUtilDuringLastSecond | read-only | current | Percentage of the device CPU utilization during last second. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measur… |
| 1.3.6.1.4.1.4526.17.1.8 | ScalarrlCpuUtilDuringLastMinute | read-only | current | Percentage of the device CPU utilization during last minute. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measur… |
| 1.3.6.1.4.1.4526.17.1.9 | ScalarrlCpuUtilDuringLast5Minutes | read-only | current | Percentage of the device CPU utilization during the last 5 minutes. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since… |
| 1.3.6.1.4.1.4526.17.1.10 | ScalarrlRebootDelay | read-write | current | Setting the variable will cause the device to reboot rlRebootDelay timeticks from the moment this variable was set. If not set, the variable will return a valu… |
| 1.3.6.1.4.1.4526.17.1.11 | NoderlGroupManagement | |||
| 1.3.6.1.4.1.4526.17.1.11.1 | ScalarrlGroupMngQuery | read-write | current | Setting value query will cause the device to query for UPNP devices on the network. The device will always return value idle for GET. |
| 1.3.6.1.4.1.4526.17.1.11.2 | ScalarrlGroupMngQueryPeriod | read-write | current | Sets desired interval between queries for UPNP devices on the network. Setting 0 will result in no such query. Note that the actual query interval might be les… |
| 1.3.6.1.4.1.4526.17.1.11.3 | ScalarrlGroupMngLastUpdate | read-only | current | The last time rlGroupMng MIB was updated. |
| 1.3.6.1.4.1.4526.17.1.11.4 | TablerlGroupMngDevicesTable | not-accessible | current | The table showing the discovered devices. |
| 1.3.6.1.4.1.4526.17.1.11.4.1 | RowrlGroupMngDeviceEntry | not-accessible | current | The row definition for this table. |
| 1.3.6.1.4.1.4526.17.1.11.4.1.1 | ColumnrlGroupMngDeviceIdType | not-accessible | current | The IP address type of the discovered device |
| 1.3.6.1.4.1.4526.17.1.11.4.1.2 | ColumnrlGroupMngDeviceId | not-accessible | current | The IP address of the discovered device |
| 1.3.6.1.4.1.4526.17.1.11.4.1.3 | ColumnrlGroupMngSubdevice | not-accessible | current | A subdevice within the rlGroupMngDeviceId. Only subdevices with greatest specifity will be kept (specific UUID device is more specific than basic device which … |
| 1.3.6.1.4.1.4526.17.1.11.4.1.4 | ColumnrlGroupMngDeviceDescription | read-only | current | The discovery protocol description of the device. |
| 1.3.6.1.4.1.4526.17.1.11.4.1.5 | ColumnrlGroupMngGroupMngEnabled | read-only | current | Indicates whether the device has Group Management enable. |
| 1.3.6.1.4.1.4526.17.1.11.4.1.6 | ColumnrlGroupMngGroupLLDPDeviceId | read-only | current | The LLDP device id. If it is empty the device id is not known (either it is a non-MTS device or a non-LLDP supporting MTS device. |
| 1.3.6.1.4.1.4526.17.1.11.4.1.7 | ColumnrlGroupMngDeviceVendor | read-only | current | The vendor of the device. If empty the vendor is not known. |
| 1.3.6.1.4.1.4526.17.1.11.4.1.8 | ColumnrlGroupMngDeviceAdvertisedCachingTime | read-only | current | The caching time advertised by the device. If no update for this device has been received during this caching time the system will assume that the device has l… |
| 1.3.6.1.4.1.4526.17.1.11.4.1.9 | ColumnrlGroupMngDeviceLocationURL | read-only | current | The URL inidicating the location of the XML presenting the details of the device. |
| 1.3.6.1.4.1.4526.17.1.11.4.1.10 | ColumnrlGroupMngDeviceLastSeen | read-only | current | The value of sysUpTime at the moment of last reception of an update for this device. |
| 1.3.6.1.4.1.4526.17.1.13 | ScalarrlRunningCDBequalToStartupCDB | read-only | current | Indicates whether there are changes in running CDB that were not saved in flash. |
| 1.3.6.1.4.1.4526.17.1.14 | ScalarrlClearMib | read-write | current | Clear MIB value for scalars or tables: Delete all entries for tables with dynamic entries. Set table entries default values for table with static entries. Set … |
| 1.3.6.1.4.1.4526.17.1.15 | ScalarrlScheduledReload | read-write | current | Used for requesting a delayed reload of the device in a specific desired time, should be configured in one of the following formats: 'athhmmddMM' , 'inhhhmmm' … |
| 1.3.6.1.4.1.4526.17.1.16 | ScalarrlScheduledReloadPendingDate | read-only | current | Displays the most recently requested scheduled-reload due date in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7). if there is no pending… |
| 1.3.6.1.4.1.4526.17.1.17 | ScalarrlScheduledReloadApprovedDate | read-only | current | Displays the most recently approved/committed scheduled-reload date in 'inhhhmmathhmmssddMMYYYYw' format. where 'w' stands for weekDay (1-7). if there is no co… |
| 1.3.6.1.4.1.4526.17.1.18 | ScalarrlScheduledReloadCommit | read-write | current | commits the pending scheduled-reload request, and completes the transaction. when this value is set to TRUE, the system is instructed to perform the requested … |
| 1.3.6.1.4.1.4526.17.1.19 | TablerlSysNameTable | not-accessible | current | Holds the current system name configuration. |
| 1.3.6.1.4.1.4526.17.1.19.1 | RowrlSysNameEntry | not-accessible | current | The row definition of this table. |
| 1.3.6.1.4.1.4526.17.1.19.1.1 | ColumnrlSysNameSource | not-accessible | current | The system name source. 'static' if defined by user through CLI, 'dhcpv6' or 'dhcpv4' if received by DHCP network protocol. |
| 1.3.6.1.4.1.4526.17.1.19.1.2 | ColumnrlSysNameIfIndex | not-accessible | current | The IfIndex from which the system-name configuration was received, for static entries, value will always be 1. |
| 1.3.6.1.4.1.4526.17.1.19.1.3 | ColumnrlSysNameName | read-create | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is th… |
| 1.3.6.1.4.1.4526.17.1.19.1.4 | ColumnrlSysNameRowStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.4526.17.1.20 | ScalarrlErrdisableLinkFlappingCause | read-write | current | Enable/Disable Link flapping error disable in the switch. |