NETGEAR-SNTP-CLIENT-MIB
50 objects
This MIB module defines a portion of the SNMP MIB under the Netgear Inc enterprise OID pertaining to SNTP client configuration and statistical collection.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| NETGEAR-REF-MIB | ng7000managedswitch |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.17 | IdentityagentSntpClientMIB | This MIB module defines a portion of the SNMP MIB under the Netgear Inc enterprise OID pertaining to SNTP client configuration and statistical collection. | ||
| 1.3.6.1.4.1.4526.10.17.1 | NodeagentSntpClientObjects | |||
| 1.3.6.1.4.1.4526.10.17.1.1 | NodeagentSntpClient | |||
| 1.3.6.1.4.1.4526.10.17.1.1.1 | ScalaragentSntpClientVersion | read-only | current | The highest SNTP version this client supports. Per RFC 2030, higher versions are required to be backwards compatible with all lower versions with the exception… |
| 1.3.6.1.4.1.4526.10.17.1.1.2 | ScalaragentSntpClientSupportedMode | read-only | current | The SNTP client administrative modes that this device supports. A client may support more than one administrative mode. |
| 1.3.6.1.4.1.4526.10.17.1.1.3 | ScalaragentSntpClientMode | read-write | current | The current administrative mode of the SNTP client. A SET of this object will cause the SNTP client to change administrative modes. A SET request MUST have onl… |
| 1.3.6.1.4.1.4526.10.17.1.1.4 | ScalaragentSntpClientPort | read-write | current | The local port number used to listen for broadcasts and responses from servers. |
| 1.3.6.1.4.1.4526.10.17.1.1.5 | ScalaragentSntpClientLastUpdateTime | read-only | current | The local date and time that the SNTP client last updated the system time on the device since agent reboot. This time is updated for all non-disabled administr… |
| 1.3.6.1.4.1.4526.10.17.1.1.6 | ScalaragentSntpClientLastAttemptTime | read-only | current | The local date and time of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. This value is a timestamp for the agentSn… |
| 1.3.6.1.4.1.4526.10.17.1.1.7 | ScalaragentSntpClientLastAttemptStatus | read-only | current | The status of the last SNTP request or unsolicited SNTP message for this SNTP client since agent reboot. The status is updated for all non-disabled administrat… |
| 1.3.6.1.4.1.4526.10.17.1.1.8 | ScalaragentSntpClientServerAddressType | read-only | current | The address type of the SNTP server as identified by the last received packet. Support for all address types is NOT REQUIRED. |
| 1.3.6.1.4.1.4526.10.17.1.1.9 | ScalaragentSntpClientServerAddress | read-only | current | The encoded address of the SNTP server as identified by the last received packet. |
| 1.3.6.1.4.1.4526.10.17.1.1.10 | ScalaragentSntpClientServerMode | read-only | current | This is a 3-bit integer identifying the mode of the server as indicated in the last received packet with values defined as follows: Mode Meaning 0 reserved 1 s… |
| 1.3.6.1.4.1.4526.10.17.1.1.11 | ScalaragentSntpClientServerStratum | read-only | current | This is an 8-bit integer identifying the stratum of the server as indicated in the last received packet with values defined as follows: Stratum Meaning 0 unspe… |
| 1.3.6.1.4.1.4526.10.17.1.1.12 | ScalaragentSntpClientServerRefClkId | read-only | current | This is the value of the Reference Identifier in the last received packet defined as follows. Reference Identifier: This is a 32-bit bitstring identifying the … |
| 1.3.6.1.4.1.4526.10.17.1.1.13 | ScalaragentSntpClientPollInterval | read-write | obsolete | The minimum number of seconds between successive SNTP polls of the server in seconds as a power of two. This polling interval is used for SNTP requests in unic… |
| 1.3.6.1.4.1.4526.10.17.1.1.14 | ScalaragentSntpClientSourceInterface | read-write | current | A source-interface selection on an Interface Index (like vlan based routing interface, port based routing interface, loopback interface, tunnel interface). A n… |
| 1.3.6.1.4.1.4526.10.17.1.1.15 | ScalaragentSntpClientServicePortSrcInterface | read-write | current | To select Service Port as a source-interface. |
| 1.3.6.1.4.1.4526.10.17.1.2 | NodeagentSntpClientUnicast | |||
| 1.3.6.1.4.1.4526.10.17.1.2.1 | ScalaragentSntpClientUnicastPollInterval | read-write | current | The minimum number of seconds between successive SNTP polls of the server in seconds as a power of two. This polling interval is used for SNTP requests in unic… |
| 1.3.6.1.4.1.4526.10.17.1.2.2 | ScalaragentSntpClientUnicastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This timeout is used for SNTP requests in u… |
| 1.3.6.1.4.1.4526.10.17.1.2.3 | ScalaragentSntpClientUnicastPollRetry | read-write | current | The number of times to retry a request to the same SNTP server that has 'timed out.'. This retry count is used for directed SNTP requests in unicast(1) adminis… |
| 1.3.6.1.4.1.4526.10.17.1.2.4 | ScalaragentSntpClientUcastServerMaxEntries | read-only | current | The maximum number of server entries that are allowed in the agentSntpClientUcastServerTable. |
| 1.3.6.1.4.1.4526.10.17.1.2.5 | ScalaragentSntpClientUcastServerCurrEntries | read-only | current | The current number of server entries in the agentSntpClientUcastServerTable. |
| 1.3.6.1.4.1.4526.10.17.1.2.6 | TableagentSntpClientUcastServerTable | not-accessible | current | A table containing configuration and statistical information for unicast SNTP servers. Each server entry is represented by single conceptual row in this table. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1 | RowagentSntpClientUcastServerEntry | not-accessible | current | Information for a particular unicast SNTP server. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.1 | ColumnagentSntpClientUcastServerIndex | not-accessible | current | This object uniquely identifies the entry in the table. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.2 | ColumnagentSntpClientUcastServerAddressType | read-create | current | This object specifies how agentSntpClientUcastServerAddr is encoded. Support for all possible enumerations defined by InetAddressType is NOT REQUIRED. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.3 | ColumnagentSntpClientUcastServerAddress | read-create | current | The encoded internet address of an SNTP server. Unicast SNTP requests will be sent to this address. If this address is a DNS hostname, then that hostname SHOUL… |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.4 | ColumnagentSntpClientUcastServerPort | read-create | current | The port number on the server to which poll requests are sent. A set request MUST NOT use a value of 0 for this object. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.5 | ColumnagentSntpClientUcastServerVersion | read-create | current | The SNTP version this server supports. This is the value that will be encoded in NTP polls when operating in unicast(1) administrative mode. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.6 | ColumnagentSntpClientUcastServerPrecedence | read-create | current | The precedence that this server has in relation to its peers in the determining the sequence of servers to which SNTP requests will be sent. The client continu… |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.7 | ColumnagentSntpClientUcastServerLastUpdateTime | read-only | current | The local date and time that the response from this server was used to update the system time on the device since agent reboot. If the SNTP client has not upda… |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.8 | ColumnagentSntpClientUcastServerLastAttemptTime | read-only | current | The local date and time that this SNTP server was last queried since agent reboot. Essentially, this value is a timestamp for the agentSntpClientUcastServerLas… |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.9 | ColumnagentSntpClientUcastServerLastAttemptStatus | read-only | current | The status of the last SNTP request to this server since agent reboot. If no requests have been made then this object should return 'other'. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.10 | ColumnagentSntpClientUcastServerNumRequests | read-only | current | The number of SNTP requests made to this server since the last agent reboot. This includes retry attempts to the server. |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.11 | ColumnagentSntpClientUcastServerNumFailedRequests | read-only | current | The number of SNTP requests made to this server that did not result in a successful response since the last agent reboot. This includes retry attempts to the s… |
| 1.3.6.1.4.1.4526.10.17.1.2.6.1.12 | ColumnagentSntpClientUcastServerRowStatus | read-create | current | The row status of this conceptual row in the table. active - The server is available for use in SNTP client operations. Other writable leaves in this table MAY… |
| 1.3.6.1.4.1.4526.10.17.1.3 | NodeagentSntpClientBroadcast | |||
| 1.3.6.1.4.1.4526.10.17.1.3.1 | ScalaragentSntpClientBroadcastCount | read-only | current | The number of unsolicited broadcast SNTP messages that have been received and processed by the SNTP client. Unsolicited SNTP broadcast frames will not be count… |
| 1.3.6.1.4.1.4526.10.17.1.3.2 | ScalaragentSntpClientBroadcastInterval | read-write | current | The number of seconds the client will wait before processing another broadcast packet expressed as a power of two. Packets received during the wait interval ar… |
| 1.3.6.1.4.1.4526.10.17.2 | NodeagentSntpClientConformance | |||
| 1.3.6.1.4.1.4526.10.17.2.1 | NodeagentSntpClientGroups | |||
| 1.3.6.1.4.1.4526.10.17.2.1.1 | GroupagentSntpClientDeviceGroup | current | A collection of objects providing device level control of an SNTP client on NETGEAR enabled devices. | |
| 1.3.6.1.4.1.4526.10.17.2.1.2 | GroupagentSntpClientUnicastGroup | current | A collection of objects providing control and statistics for an SNTP client capable of operating in unicast mode. | |
| 1.3.6.1.4.1.4526.10.17.2.1.3 | GroupagentSntpClientBroadcastGroup | current | A collection of objects providing control and statistics for an SNTP client capable of operating in broadcast mode. | |
| 1.3.6.1.4.1.4526.10.17.2.2 | NodeagentSntpClientCompliances | |||
| 1.3.6.1.4.1.4526.10.17.2.2.1 | ComplianceagentSntpClientCompliance | current | The compliance statement for devices that support agentSntpClient. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SntpClientAdminMode | BITS { disabled(0), unicast(1), broadcast(2), multicast(3) } | current | An SNTP client may operate in any of several modes. At least one mode other than disabled must be supported by a client. disabled - SNTP is not administrative. No SNTP requests are sent from the client nor are any recei… |
| SntpClientUpdateStatus | INTEGER { other(1), success(2), requestTimedOut(3), badDateEncoded(4), versionNotSupported(5), serverUnsychronized(6), serverKissOfDeath(7), serverKoDRateExceeded(8) } | current | The status of the last received response or broadcast from a configured server. These values are appropriate for all administrative modes. other - None of the following enumeration values. success - The SNTP operation w… |