NETSCREEN-INTERFACE-MIB
61 objects
This module defines the object that are used to monitor NS's interface configuration
Imported Objects
| NETSCREEN-SMI | netscreenInterface |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3224.9.0 | IdentitynetscreenInterfaceMibModule | This module defines the object that are used to monitor NS's interface configuration | ||
| 1.3.6.1.4.1.3224.9.1 | TablensIfTable | not-accessible | current | All NetScreen devices have a trusted interface and an untrusted interface. The NetScreen-10 and -100 also have a DMZ interface. Additionally, on each of the vi… |
| 1.3.6.1.4.1.3224.9.1.1 | RownsIfEntry | not-accessible | current | nsIfEntry collects some attributes about NetScreen interface settings. |
| 1.3.6.1.4.1.3224.9.1.1.1 | ColumnnsIfIndex | read-only | current | Interface number which uniquely identifies an interface. |
| 1.3.6.1.4.1.3224.9.1.1.2 | ColumnnsIfName | read-only | current | Each interface has a readable name such as 'trust', 'trust/1', etc. |
| 1.3.6.1.4.1.3224.9.1.1.3 | ColumnnsIfVsys | read-only | current | According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. If the d… |
| 1.3.6.1.4.1.3224.9.1.1.4 | ColumnnsIfZone | read-only | current | Each interface belongs to one security zone. This attribute displays the security zone name an interface belongs to. |
| 1.3.6.1.4.1.3224.9.1.1.5 | ColumnnsIfStatus | read-only | current | The interface status which indicates interface's operational status. |
| 1.3.6.1.4.1.3224.9.1.1.6 | ColumnnsIfIp | read-only | current | Each interface must be assigned an IP address. |
| 1.3.6.1.4.1.3224.9.1.1.7 | ColumnnsIfNetmask | read-only | current | Each interface must belong to a subnet represented by netmask. |
| 1.3.6.1.4.1.3224.9.1.1.8 | ColumnnsIfGateway | read-only | current | Default gateway ip address. |
| 1.3.6.1.4.1.3224.9.1.1.9 | ColumnnsIfMngIp | read-only | current | Trusted, untrusted and DMZ interfaces can have two IP address: an interface IP address that corresponds to the physical port through which that interface conne… |
| 1.3.6.1.4.1.3224.9.1.1.10 | ColumnnsIfMode | read-only | current | NetScreen interface can has three operation modes. They are transparent, nat and route. |
| 1.3.6.1.4.1.3224.9.1.1.11 | ColumnnsIfMAC | read-only | current | MAC address the interface has. |
| 1.3.6.1.4.1.3224.9.1.1.12 | ColumnnsIfMngTelnet | read-only | current | This attribute is used to indicate whether the interface permits telnet management. |
| 1.3.6.1.4.1.3224.9.1.1.13 | ColumnnsIfMngSCS | read-only | current | This attribute is used to indicate whether the interface permits Secure Command Shell management. |
| 1.3.6.1.4.1.3224.9.1.1.14 | ColumnnsIfMngWEB | read-only | current | This attribute is used to indicate whether the interface permits WEB UI management. |
| 1.3.6.1.4.1.3224.9.1.1.15 | ColumnnsIfMngSSL | read-only | current | This attribute is used to indicate whether the interface permits SSL management. |
| 1.3.6.1.4.1.3224.9.1.1.16 | ColumnnsIfMngSNMP | read-only | current | This attribute is used to indicate whether the interface permits SNMP management. |
| 1.3.6.1.4.1.3224.9.1.1.17 | ColumnnsIfMngGlobal | read-only | current | This attribute is used to indicate whether the interface permits NS Global management. |
| 1.3.6.1.4.1.3224.9.1.1.18 | ColumnnsIfMngGlobalPro | read-only | current | This attribute is used to indicate whether the interface permits NS Global Pro management. |
| 1.3.6.1.4.1.3224.9.1.1.19 | ColumnnsIfMngPing | read-only | current | This attribute is used to indicate whether the interface permits Ping go-through. |
| 1.3.6.1.4.1.3224.9.1.1.20 | ColumnnsIfMngIdentReset | read-only | current | This attribute is used to indicate whether the interface permits ident reset. |
| 1.3.6.1.4.1.3224.9.1.1.21 | ColumnnsIfInfo | read-only | current | Internal id assigned to this interface. Stays persistent across resets. |
| 1.3.6.1.4.1.3224.9.1.1.22 | ColumnnsIfDescr | read-only | current | Each interface has a a configurable descriptor string. |
| 1.3.6.1.4.1.3224.9.2 | TablensIfSecondaryIpTable | not-accessible | current | In some ScreenOS, it supports multiple IP addresses and related subnets based on the same interface. This table collects the multiple IP addresses configuratio… |
| 1.3.6.1.4.1.3224.9.2.1 | RownsIfSecondaryIpEntry | not-accessible | current | nsIfSecondaryIpEntry collects some attributes about multiple IP configurations on an interface. |
| 1.3.6.1.4.1.3224.9.2.1.1 | ColumnnsIfSecondaryIpIndex | read-only | current | The table index used as primary key when retrieving the table. |
| 1.3.6.1.4.1.3224.9.2.1.2 | ColumnnsIfSecondaryIpIfIdx | read-only | current | The index value which uniquely identifies an interface the secodary ip belongs to. The interface identified by a particular value of this index is the same int… |
| 1.3.6.1.4.1.3224.9.2.1.3 | ColumnnsIfSecondaryIpVsys | read-only | current | According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system ID an interface belongs to. If the dev… |
| 1.3.6.1.4.1.3224.9.2.1.4 | ColumnnsIfSecondaryIpZone | read-only | current | each interface belongs to one security zone. this attribute displays the security zone name an interface belongs to. |
| 1.3.6.1.4.1.3224.9.2.1.5 | ColumnnsIfSecondaryIpAddress | read-only | current | Ip Address value. |
| 1.3.6.1.4.1.3224.9.2.1.6 | ColumnnsIfSecondaryIpNetmask | read-only | current | Subnet of a ip belongs to. |
| 1.3.6.1.4.1.3224.9.2.1.7 | ColumnnsIfSecondaryIpIfInfo | read-only | current | Internal id assigned to this interface. Stays persistent across resets. |
| 1.3.6.1.4.1.3224.9.3 | TablensIfFlowTable | not-accessible | current | nsIfFlowTable is used to get flow statistical information of the interface. |
| 1.3.6.1.4.1.3224.9.3.1 | RownsIfFlowEntry | not-accessible | current | Table entry collect some attributes about interface flow counters. |
| 1.3.6.1.4.1.3224.9.3.1.1 | ColumnnsIfFlowIfIdx | read-only | current | Unique interface id, also used as table index. |
| 1.3.6.1.4.1.3224.9.3.1.2 | ColumnnsIfFlowVsys | read-only | current | According NetScreen's concepts. each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. |
| 1.3.6.1.4.1.3224.9.3.1.3 | ColumnnsIfFlowInByte | read-only | current | Incoming byte number arriving at the this interface |
| 1.3.6.1.4.1.3224.9.3.1.4 | ColumnnsIfFlowInPacket | read-only | current | Incoming packet number arriving at the this interface |
| 1.3.6.1.4.1.3224.9.3.1.5 | ColumnnsIfFlowOutByte | read-only | current | Outgoing byte number sending through this interface |
| 1.3.6.1.4.1.3224.9.3.1.6 | ColumnnsIfFlowOutPacket | read-only | current | Outgoing packet number sending through this interface |
| 1.3.6.1.4.1.3224.9.3.1.7 | ColumnnsIfFlowInVpn | read-only | current | VPN packet go through this interface |
| 1.3.6.1.4.1.3224.9.3.1.8 | ColumnnsIfInVlan | read-only | current | Incoming vlan packet |
| 1.3.6.1.4.1.3224.9.3.1.9 | ColumnnsIfOutVlan | read-only | current | Outgoing vlan packet |
| 1.3.6.1.4.1.3224.9.3.1.10 | ColumnnsIfFlowIfInfo | read-only | current | Internal id assigned to this interface. Stays persistent across resets. |
| 1.3.6.1.4.1.3224.9.4 | TablensIfMonTable | not-accessible | current | This table collects some of dropped packet counters of interface |
| 1.3.6.1.4.1.3224.9.4.1 | RownsIfMonEntry | not-accessible | current | An entry containing tunnel information |
| 1.3.6.1.4.1.3224.9.4.1.1 | ColumnnsIfMonIfIdx | read-only | current | Unique interface id, also used as table index. |
| 1.3.6.1.4.1.3224.9.4.1.2 | ColumnnsIfMonVsys | read-only | current | According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. |
| 1.3.6.1.4.1.3224.9.4.1.3 | ColumnnsIfMonPlyDeny | read-only | current | Packet drop since denied by policy. |
| 1.3.6.1.4.1.3224.9.4.1.4 | ColumnnsIfMonAuthFail | read-only | current | Packet drop due to authentication failed. |
| 1.3.6.1.4.1.3224.9.4.1.5 | ColumnnsIfMonUrlBlock | read-only | current | Packet drop due to URL blocking. |
| 1.3.6.1.4.1.3224.9.4.1.6 | ColumnnsIfMonTrMngQueue | read-only | current | packet queue up due to traffic management |
| 1.3.6.1.4.1.3224.9.4.1.7 | ColumnnsIfMonTrMngDrop | read-only | current | Packet drop due to traffic management |
| 1.3.6.1.4.1.3224.9.4.1.8 | ColumnnsIfMonEncFail | read-only | current | IPSec enc failed due to sa not available, no ipak, etc |
| 1.3.6.1.4.1.3224.9.4.1.9 | ColumnnsIfMonNoSa | read-only | current | packet drop due to no sa found for incomig spi |
| 1.3.6.1.4.1.3224.9.4.1.10 | ColumnnsIfMonNoSaPly | read-only | current | packet drop due to no policy associated with found sa |
| 1.3.6.1.4.1.3224.9.4.1.11 | ColumnnsIfMonSaInactive | read-only | current | packet drop due to sa not active |
| 1.3.6.1.4.1.3224.9.4.1.12 | ColumnnsIfMonSaPolicyDeny | read-only | current | packet drop due to denial by sa policy |
| 1.3.6.1.4.1.3224.9.4.1.13 | ColumnnsIfMonIfInfo | read-only | current | Internal id assigned to this interface. Stays persistent across resets. |