NETSCREEN-POLICY-MIB
41 objects
This module defines NetScreen private MIBs for Policy Monitoring
Imported Objects
| NETSCREEN-SMI | netscreenPolicy |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3224.10.0 | IdentitynetscreenPolicyMibModule | This module defines NetScreen private MIBs for Policy Monitoring | ||
| 1.3.6.1.4.1.3224.10.1 | TablensPlyTable | not-accessible | current | A firewall provides a network boundary with a single point of entry and exit-a choke point.You can screen and direct all that traffic through the implementatio… |
| 1.3.6.1.4.1.3224.10.1.1 | RownsPlyEntry | not-accessible | current | Each entry in the nsPlyTable holds a set of configuration parameters associatied with an instance of policy. |
| 1.3.6.1.4.1.3224.10.1.1.1 | ColumnnsPlyId | read-only | current | Each policy is identified by a unique policy ID. |
| 1.3.6.1.4.1.3224.10.1.1.2 | ColumnnsPlyVsys | read-only | current | Vitural system's name this polic entry belongs to. |
| 1.3.6.1.4.1.3224.10.1.1.3 | ColumnnsPlySrcZone | read-only | current | Traffic through a firewall means that traffic flows from one security zone to another. This object describes the source zone name traffic flow passes. |
| 1.3.6.1.4.1.3224.10.1.1.4 | ColumnnsPlyDstZone | read-only | current | Traffic through a firewall means that traffic flows from one security zone to another. This object describes the destination zone name traffic flow passes. |
| 1.3.6.1.4.1.3224.10.1.1.5 | ColumnnsPlySrcAddr | read-only | current | Addresses are objects that identify network devices such as hosts and networks by their location in relation to the firwall on which security zone.To create an… |
| 1.3.6.1.4.1.3224.10.1.1.6 | ColumnnsPlyDstAddr | read-only | current | Addresses are objects that identify network devices such as hosts and networks by their location in relation to the firwall-on which security zone.To create an… |
| 1.3.6.1.4.1.3224.10.1.1.7 | ColumnnsPlyService | read-only | current | Sevices are objects that identify application protocols using layer 4 information such as standard and accepted TCP and UDP port numbers for application servic… |
| 1.3.6.1.4.1.3224.10.1.1.8 | ColumnnsPlyAction | read-only | current | Actions objects that describe what the firewall does to the traffic it receives. Permit allows the packet to pass the firewall. Deny blocks the packet from tra… |
| 1.3.6.1.4.1.3224.10.1.1.9 | ColumnnsPlyNat | read-only | current | You can apply NAT at the interface level or at the policy level. With policy-based NAT, you can translate the source address on either incoming or outging netw… |
| 1.3.6.1.4.1.3224.10.1.1.10 | ColumnnsPlyFixPort | read-only | current | When in policy-based NAT, the new secure address can come from either a Dynamic IP or from a Mapped IP. This object indicates if poliy-based NAT uses fix port … |
| 1.3.6.1.4.1.3224.10.1.1.11 | ColumnnsPlyDipId | read-only | current | This object indicates the Dynamic ID chosen for NAT policy. |
| 1.3.6.1.4.1.3224.10.1.1.12 | ColumnnsPlyVpnTunnel | read-only | current | VPN tunnel this access policy applies to. |
| 1.3.6.1.4.1.3224.10.1.1.13 | ColumnnsPlyL2tpTunnel | read-only | current | L2TP tunnel this access policy applies to. |
| 1.3.6.1.4.1.3224.10.1.1.14 | ColumnnsPlyAuth | read-only | current | This object indicates the selecting this option requires the user at the source address to authenticate his/her identiry by supplying a user name and password … |
| 1.3.6.1.4.1.3224.10.1.1.15 | ColumnnsPlyLogEnable | read-only | current | When you enable logging in an access policy, the NetScreen device logs all connections to which that paticular access policy applies. |
| 1.3.6.1.4.1.3224.10.1.1.16 | ColumnnsPlyCountEnable | read-only | current | When you enable counting in an access plicy, the NetScreen device counts the total number of bytes of traffic to which this access policy applies and records t… |
| 1.3.6.1.4.1.3224.10.1.1.17 | ColumnnsPlyAlarmBPS | read-only | current | User can set a threshold that triggers an alarm when the traffic permitted by the access policy exceeds a specified number of bytes per second. |
| 1.3.6.1.4.1.3224.10.1.1.18 | ColumnnsPlyAlarmBPM | read-only | current | User can set a threshold that triggers an alarm when the traffic permitted by the access policy exceeds a specified number of bytes per Minute. |
| 1.3.6.1.4.1.3224.10.1.1.19 | ColumnnsPlySchedule | read-only | current | By associating a schedule to an access policy, you can determine when the access policy is in effect. |
| 1.3.6.1.4.1.3224.10.1.1.20 | ColumnnsPlyTrafficShapeEnable | read-only | current | User can set parameters for the control and shaping of traffic for each access policy. |
| 1.3.6.1.4.1.3224.10.1.1.21 | ColumnnsPlyTrafficPriority | read-only | current | Traffic priority for this policy. |
| 1.3.6.1.4.1.3224.10.1.1.22 | ColumnnsPlyDSEnable | read-only | current | Differentiated Services is a system for tagging traffic at a position within a hierarchy of priority. |
| 1.3.6.1.4.1.3224.10.1.1.23 | ColumnnsPlyActiveStatus | read-only | current | Show the status of one policy entry. |
| 1.3.6.1.4.1.3224.10.1.1.24 | ColumnnsPlyName | read-only | current | policy name (optional) |
| 1.3.6.1.4.1.3224.10.1.1.25 | ColumnnsPlyServiceName | read-only | current | Sevices name that identify application protocols using layer 4 information such as standard and accepted TCP and UDP port numbers for application services like… |
| 1.3.6.1.4.1.3224.10.2 | TablensPlyMonTable | not-accessible | current | traffic information for the policy-based traffic. |
| 1.3.6.1.4.1.3224.10.2.1 | RownsPlyMonEntry | not-accessible | current | An entry holds a set of traffic counters of a specific policy. |
| 1.3.6.1.4.1.3224.10.2.1.1 | ColumnnsPlyMonId | read-only | current | Policy Id, also used as index in this table |
| 1.3.6.1.4.1.3224.10.2.1.2 | ColumnnsPlyMonVsys | read-only | current | vsys this policy belongs to |
| 1.3.6.1.4.1.3224.10.2.1.3 | ColumnnsPlyMonPackPerSec | read-only | current | Packets go through this policy per second |
| 1.3.6.1.4.1.3224.10.2.1.4 | ColumnnsPlyMonPackPerMin | read-only | current | Packets go through this policy per minute |
| 1.3.6.1.4.1.3224.10.2.1.5 | ColumnnsPlyMonTotalPacket | read-only | current | total packets go through this policy |
| 1.3.6.1.4.1.3224.10.2.1.6 | ColumnnsPlyMonBytePerSec | read-only | current | Bytes go through this policy per second |
| 1.3.6.1.4.1.3224.10.2.1.7 | ColumnnsPlyMonBytePerMin | read-only | current | Bytes go through this policy per minute |
| 1.3.6.1.4.1.3224.10.2.1.8 | ColumnnsPlyMonTotalByte | read-only | current | Total bytes go through this policy |
| 1.3.6.1.4.1.3224.10.2.1.9 | ColumnnsPlyMonSessionPerSec | read-only | current | Sessions go through this policy per second |
| 1.3.6.1.4.1.3224.10.2.1.10 | ColumnnsPlyMonSessionPerMin | read-only | current | Sessions go through this policy per minute |
| 1.3.6.1.4.1.3224.10.2.1.11 | ColumnnsPlyMonTotalSession | read-only | current | Total Sessions go through this policy |