NETSCREEN-VR-BGP4-MIB
53 objects
The MIB module for NS-BGP-4.
Imported Objects
| NETSCREEN-SMI | netscreenVR |
| NETSCREEN-TRAP-MIB | netscreenTrapDesc netscreenTrapType |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3224.18.6 | IdentitynsVrBgp | The MIB module for NS-BGP-4. | ||
| 1.3.6.1.4.1.3224.18.6.1 | TablensVrBgpInfoTable | not-accessible | current | BGP info table. This table contains, one entry per VR, information about the BGP's Version, LocalAs and Identifier. |
| 1.3.6.1.4.1.3224.18.6.1.1 | RownsVrBgpInfoEntry | not-accessible | current | Entry containing information about the BGP's Version, LocalAs and Identifier |
| 1.3.6.1.4.1.3224.18.6.1.1.1 | ColumnnsVrBgpInfoVersion | read-only | current | Vector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained w… |
| 1.3.6.1.4.1.3224.18.6.1.1.2 | ColumnnsVrBgpInfoLocalAs | read-only | current | The local autonomous system number. |
| 1.3.6.1.4.1.3224.18.6.1.1.3 | ColumnnsVrBgpInfoIdentifier | read-only | current | The BGP Identifier of local system. |
| 1.3.6.1.4.1.3224.18.6.1.1.4 | ColumnnsVrBgpInfoVRID | read-only | current | Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048] |
| 1.3.6.1.4.1.3224.18.6.3 | TablensVrBgpPeerTable | not-accessible | current | BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. |
| 1.3.6.1.4.1.3224.18.6.3.1 | RownsVrBgpPeerEntry | not-accessible | current | Entry containing information about the connection with a BGP peer. |
| 1.3.6.1.4.1.3224.18.6.3.1.1 | ColumnnsVrBgpPeerIdentifier | read-only | current | The BGP Identifier of this entry's BGP peer. |
| 1.3.6.1.4.1.3224.18.6.3.1.2 | ColumnnsVrBgpPeerState | read-only | current | The BGP peer connection state. |
| 1.3.6.1.4.1.3224.18.6.3.1.3 | ColumnnsVrBgpPeerAdminStatus | read-only | current | The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop… |
| 1.3.6.1.4.1.3224.18.6.3.1.4 | ColumnnsVrBgpPeerNegotiatedVersion | read-only | current | The negotiated version of BGP running between the two peers. |
| 1.3.6.1.4.1.3224.18.6.3.1.5 | ColumnnsVrBgpPeerLocalAddr | read-only | current | The local IP address of this entry's BGP connection. |
| 1.3.6.1.4.1.3224.18.6.3.1.6 | ColumnnsVrBgpPeerLocalPort | read-only | current | The local port for the TCP connection between the BGP peers. |
| 1.3.6.1.4.1.3224.18.6.3.1.7 | ColumnnsVrBgpPeerRemoteAddr | read-only | current | The remote IP address of this entry's BGP peer. |
| 1.3.6.1.4.1.3224.18.6.3.1.8 | ColumnnsVrBgpPeerRemotePort | read-only | current | The remote port for the TCP connection between the BGP peers. Note that the objects nsVrBgpPeerLocalAddr, nsVrBgpPeerLocalPort, nsVrBgpPeerRemoteAddr and nsVrB… |
| 1.3.6.1.4.1.3224.18.6.3.1.9 | ColumnnsVrBgpPeerRemoteAs | read-only | current | The remote autonomous system number. |
| 1.3.6.1.4.1.3224.18.6.3.1.10 | ColumnnsVrBgpPeerInUpdates | read-only | current | The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established. |
| 1.3.6.1.4.1.3224.18.6.3.1.11 | ColumnnsVrBgpPeerOutUpdates | read-only | current | The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established. |
| 1.3.6.1.4.1.3224.18.6.3.1.12 | ColumnnsVrBgpPeerInTotalMessages | read-only | current | The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established. |
| 1.3.6.1.4.1.3224.18.6.3.1.13 | ColumnnsVrBgpPeerOutTotalMessages | read-only | current | The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established. |
| 1.3.6.1.4.1.3224.18.6.3.1.14 | ColumnnsVrBgpPeerLastError | read-only | current | The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte … |
| 1.3.6.1.4.1.3224.18.6.3.1.15 | ColumnnsVrBgpPeerFsmEstablishedTransitions | read-only | current | The total number of times the BGP FSM transitioned into the established state. |
| 1.3.6.1.4.1.3224.18.6.3.1.16 | ColumnnsVrBgpPeerFsmEstablishedTime | read-only | current | This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set… |
| 1.3.6.1.4.1.3224.18.6.3.1.17 | ColumnnsVrBgpPeerConnectRetryInterval | read-only | current | Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. |
| 1.3.6.1.4.1.3224.18.6.3.1.18 | ColumnnsVrBgpPeerHoldTime | read-only | current | Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the v… |
| 1.3.6.1.4.1.3224.18.6.3.1.19 | ColumnnsVrBgpPeerKeepAlive | read-only | current | Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared… |
| 1.3.6.1.4.1.3224.18.6.3.1.20 | ColumnnsVrBgpPeerHoldTimeConfigured | read-only | current | Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BG… |
| 1.3.6.1.4.1.3224.18.6.3.1.21 | ColumnnsVrBgpPeerKeepAliveConfigured | read-only | current | Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE mes… |
| 1.3.6.1.4.1.3224.18.6.3.1.22 | ColumnnsVrBgpPeerMinASOriginationInterval | read-only | current | Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds. |
| 1.3.6.1.4.1.3224.18.6.3.1.23 | ColumnnsVrBgpPeerMinRouteAdvertisementInterval | read-only | current | Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds. |
| 1.3.6.1.4.1.3224.18.6.3.1.24 | ColumnnsVrBgpPeerInUpdateElapsedTime | read-only | current | Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time nsVrBgpPeerInUpdates is incremented, the value of this object i… |
| 1.3.6.1.4.1.3224.18.6.3.1.25 | ColumnnsVrBgpPeerVRID | read-only | current | Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048] |
| 1.3.6.1.4.1.3224.18.6.6 | TablensVrBgp4PathAttrTable | not-accessible | current | The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. |
| 1.3.6.1.4.1.3224.18.6.6.1 | RownsVrBgp4PathAttrEntry | not-accessible | current | Information about a path to a network. |
| 1.3.6.1.4.1.3224.18.6.6.1.1 | ColumnnsVrBgp4PathAttrPeer | read-only | current | The IP address of the peer where the path information was learned. |
| 1.3.6.1.4.1.3224.18.6.6.1.2 | ColumnnsVrBgp4PathAttrIpAddrPrefixLen | read-only | current | Length in bits of the IP address prefix in the Network Layer Reachability Information field. |
| 1.3.6.1.4.1.3224.18.6.6.1.3 | ColumnnsVrBgp4PathAttrIpAddrPrefix | read-only | current | An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by nsVrBgp4P… |
| 1.3.6.1.4.1.3224.18.6.6.1.4 | ColumnnsVrBgp4PathAttrOrigin | read-only | current | The ultimate origin of the path information. |
| 1.3.6.1.4.1.3224.18.6.6.1.5 | ColumnnsVrBgp4PathAttrASPathSegment | read-only | current | The sequence of AS path segments. Each AS path segment is represented by a triple <type, length, value>. The type is a 1-octet field which has two possible val… |
| 1.3.6.1.4.1.3224.18.6.6.1.6 | ColumnnsVrBgp4PathAttrNextHop | read-only | current | The address of the border router that should be used for the destination network. |
| 1.3.6.1.4.1.3224.18.6.6.1.7 | ColumnnsVrBgp4PathAttrMultiExitDisc | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.3224.18.6.6.1.8 | ColumnnsVrBgp4PathAttrLocalPref | read-only | current | The originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.3224.18.6.6.1.9 | ColumnnsVrBgp4PathAttrAtomicAggregate | read-only | current | Whether or not the local system has selected a less specific route without selecting a more specific route. |
| 1.3.6.1.4.1.3224.18.6.6.1.10 | ColumnnsVrBgp4PathAttrAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. |
| 1.3.6.1.4.1.3224.18.6.6.1.11 | ColumnnsVrBgp4PathAttrAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| 1.3.6.1.4.1.3224.18.6.6.1.12 | ColumnnsVrBgp4PathAttrCalcLocalPref | read-only | current | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.3224.18.6.6.1.13 | ColumnnsVrBgp4PathAttrBest | read-only | current | An indication of whether or not this route was chosen as the best BGP4 route. |
| 1.3.6.1.4.1.3224.18.6.6.1.14 | ColumnnsVrBgp4PathAttrUnknown | read-only | current | One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if a… |
| 1.3.6.1.4.1.3224.18.6.6.1.15 | ColumnnsVrBgp4PathAttrVRID | read-only | current | Virtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048] |
| 1.3.6.1.4.1.3224.18.6.7 | NodensVrBgpTraps | |||
| 1.3.6.1.4.1.3224.18.6.7.1 | NotificationnsVrBgpEstablished | current | The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. |