MIB Viewer

NETSCREEN-VR-RIPv2-MIB

36 objects
The MIB module to describe the RIP2 Version 2 Protocol
Imported Objects
NETSCREEN-SMInetscreenVR
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.3224.18.7IdentitynsVrRip2The MIB module to describe the RIP2 Version 2 Protocol
1.3.6.1.4.1.3224.18.7.1TablensVrRip2GlobalsTablenot-accessiblecurrentA list of RIP2 Globals per VR.
1.3.6.1.4.1.3224.18.7.1.1RownsVrRip2GlobalsEntrynot-accessiblecurrentOne VR's Globals.
1.3.6.1.4.1.3224.18.7.1.1.1ColumnnsVrRip2GlobalRouteChangesread-onlycurrentThe number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
1.3.6.1.4.1.3224.18.7.1.1.2ColumnnsVrRip2GlobalQueriesread-onlycurrentThe number of responses sent to RIP queries from other systems.
1.3.6.1.4.1.3224.18.7.1.1.3ColumnnsVrRip2GlobalVRIDread-onlycurrentVirtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048]
1.3.6.1.4.1.3224.18.7.2TablensVrRip2IfStatTablenot-accessiblecurrentA list of subnets which require separate status monitoring in RIP.
1.3.6.1.4.1.3224.18.7.2.1RownsVrRip2IfStatEntrynot-accessiblecurrentA Single Routing Domain in a single Subnet.
1.3.6.1.4.1.3224.18.7.2.1.1ColumnnsVrRip2IfStatAddressread-onlycurrentThe IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for…
1.3.6.1.4.1.3224.18.7.2.1.2ColumnnsVrRip2IfStatRcvBadPacketsread-onlycurrentThe number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command…
1.3.6.1.4.1.3224.18.7.2.1.3ColumnnsVrRip2IfStatRcvBadRoutesread-onlycurrentThe number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
1.3.6.1.4.1.3224.18.7.2.1.4ColumnnsVrRip2IfStatSentUpdatesread-onlycurrentThe number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
1.3.6.1.4.1.3224.18.7.2.1.5ColumnnsVrRip2IfStatStatusread-createcurrentWriting invalid has the effect of deleting this interface.
1.3.6.1.4.1.3224.18.7.2.1.6ColumnnsVrRip2IfStatVRIDread-onlycurrentVirtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048]
1.3.6.1.4.1.3224.18.7.3TablensVrRip2IfConfTablenot-accessiblecurrentA list of subnets which require separate configuration in RIP.
1.3.6.1.4.1.3224.18.7.3.1RownsVrRip2IfConfEntrynot-accessiblecurrentA Single Routing Domain in a single Subnet.
1.3.6.1.4.1.3224.18.7.3.1.1ColumnnsVrRip2IfConfAddressread-onlycurrentThe IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for…
1.3.6.1.4.1.3224.18.7.3.1.2ColumnnsVrRip2IfConfDomainread-createobsoleteValue inserted into the Routing Domain field of all RIP packets sent on this interface.
1.3.6.1.4.1.3224.18.7.3.1.3ColumnnsVrRip2IfConfAuthTyperead-createcurrentThe type of Authentication used on this interface.
1.3.6.1.4.1.3224.18.7.3.1.4ColumnnsVrRip2IfConfAuthKeyread-createcurrentThe value to be used as the Authentication Key whenever the corresponding instance of nsVrRip2IfConfAuthType has a value other than noAuthentication. A modific…
1.3.6.1.4.1.3224.18.7.3.1.5ColumnnsVrRip2IfConfSendread-createcurrentWhat the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates usi…
1.3.6.1.4.1.3224.18.7.3.1.6ColumnnsVrRip2IfConfReceiveread-createcurrentThis indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
1.3.6.1.4.1.3224.18.7.3.1.7ColumnnsVrRip2IfConfDefaultMetricread-createcurrentThis variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that n…
1.3.6.1.4.1.3224.18.7.3.1.8ColumnnsVrRip2IfConfStatusread-createcurrentWriting invalid has the effect of deleting this interface.
1.3.6.1.4.1.3224.18.7.3.1.9ColumnnsVrRip2IfConfSrcAddressread-createcurrentThe IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as nsVrRip2IfConfAddress.…
1.3.6.1.4.1.3224.18.7.3.1.10ColumnnsVrRip2IfConfVRIDread-onlycurrentVirtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048]
1.3.6.1.4.1.3224.18.7.4TablensVrRip2PeerTablenot-accessiblecurrentA list of RIP Peers.
1.3.6.1.4.1.3224.18.7.4.1RownsVrRip2PeerEntrynot-accessiblecurrentInformation regarding a single routing peer.
1.3.6.1.4.1.3224.18.7.4.1.1ColumnnsVrRip2PeerAddressread-onlycurrentThe IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system.
1.3.6.1.4.1.3224.18.7.4.1.2ColumnnsVrRip2PeerDomainread-onlycurrentThe value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero.
1.3.6.1.4.1.3224.18.7.4.1.3ColumnnsVrRip2PeerLastUpdateread-onlycurrentThe value of sysUpTime when the most recent RIP update was received from this system.
1.3.6.1.4.1.3224.18.7.4.1.4ColumnnsVrRip2PeerVersionread-onlycurrentThe RIP version number in the header of the last RIP packet received.
1.3.6.1.4.1.3224.18.7.4.1.5ColumnnsVrRip2PeerRcvBadPacketsread-onlycurrentThe number of RIP response packets from this peer discarded as invalid.
1.3.6.1.4.1.3224.18.7.4.1.6ColumnnsVrRip2PeerRcvBadRoutesread-onlycurrentThe number of routes from this peer that were ignored because the entry format was invalid.
1.3.6.1.4.1.3224.18.7.4.1.7ColumnnsVrRip2PeerVRIDread-onlycurrentVirtual Router ID. VRID range for system created VRs: [1-1024] and for user created VRs: [1025-2048]
Type Definitions
NameSyntaxStatusDescription
RouteTagOCTET STRING (SIZE (2))currentthe RouteTag type represents the contents of the Route Domain field in the packet header or route entry