NETSWITCH-MIB
47 objects
No module-level DESCRIPTION found.
Imported Objects
| HP-ICF-OID | hpSwitch |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.1 | NodehpOpSystem | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1 | NodehpBuf | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1 | NodehpMsgBuf | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1 | TablehpMsgBufTable | not-accessible | mandatory | A table that contains information on all the Message buffers for each slot. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1 | RowhpMsgBufEntry | not-accessible | mandatory | Information about a slot in a chassis |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.1 | ColumnhpMsgBufSlotIndex | read-only | mandatory | The slot number within the box for which this entry contains information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.2 | ColumnhpMsgBufCorrupted | read-only | mandatory | The number of times a corrupted buffer was deleted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.3 | ColumnhpMsgBufFree | read-only | mandatory | The number of message buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modu… |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.4 | ColumnhpMsgBufInit | read-only | mandatory | The number of message buffers allocated when the switch booted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.5 | ColumnhpMsgBufMin | read-only | mandatory | The smallest number of message buffers available since the switch booted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.6 | ColumnhpMsgBufMiss | read-only | mandatory | The number of times that the switch was unable to obtain a message buffer. Failure to obtain a buffer indicates that buffers were busy. This parameter is direc… |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.1.1.1.7 | ColumnhpMsgBufSize | read-only | mandatory | The size of the message buffer in bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2 | NodehpPktBuf | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1 | TablehpPktBufTable | not-accessible | mandatory | A table that contains information on all the Packet buffers for each slot. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1 | RowhpPktBufEntry | not-accessible | mandatory | Information about a slot in a chassis |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.1 | ColumnhpPktBufSlotIndex | read-only | mandatory | The slot number within the box for which this entry contains information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.2 | ColumnhpPktBufCorrupted | read-only | mandatory | The number of times a corrupted buffer was deleted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.3 | ColumnhpPktBufFree | read-only | mandatory | The number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modul… |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.4 | ColumnhpPktBufInit | read-only | mandatory | The number of packet buffers allocated when the switch booted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.5 | ColumnhpPktBufMin | read-only | mandatory | The smallest number of packet buffers available since the switch booted. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.6 | ColumnhpPktBufMiss | read-only | mandatory | The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy. This parameter is direct… |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.1.2.1.1.7 | ColumnhpPktBufSize | read-only | mandatory | The size of the packet buffer in bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2 | NodehpMem | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1 | NodehpLocalMem | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1 | TablehpLocalMemTable | not-accessible | mandatory | A table that contains information on all the local memory for each slot. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1 | RowhpLocalMemEntry | not-accessible | mandatory | Information about a slot in a chassis |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.1 | ColumnhpLocalMemSlotIndex | read-only | mandatory | The slot number within the box for which this entry contains information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.2 | ColumnhpLocalMemSlabCnt | read-only | mandatory | The current number of discretely managed memory areas. Each slab is further broken down into smaller contiguous areas called segments. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.3 | ColumnhpLocalMemFreeSegCnt | read-only | mandatory | The current number of free memory segments. A free memory segment is an unused contiguous memory block of greater than 16 bytes. Generally, an increase in the … |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.4 | ColumnhpLocalMemAllocSegCnt | read-only | mandatory | The number of currently allocated memory segments. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.5 | ColumnhpLocalMemTotalBytes | read-only | mandatory | The number of currently installed bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.6 | ColumnhpLocalMemFreeBytes | read-only | mandatory | The number of available (unallocated) bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.7 | ColumnhpLocalMemAllocBytes | read-only | mandatory | The number of currently allocated bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2 | NodehpGlobalMem | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1 | TablehpGlobalMemTable | not-accessible | mandatory | A table that contains information on all the local memory for each slot. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1 | RowhpGlobalMemEntry | not-accessible | mandatory | Information about a slot in a chassis |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.1 | ColumnhpGlobalMemSlotIndex | read-only | mandatory | The slot number within the box for which this entry contains information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.2 | ColumnhpGlobalMemSlabCnt | read-only | mandatory | The current number of discretely managed memory areas. Each slab is further broken down into smaller contiguous areas called segments. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.3 | ColumnhpGlobalMemFreeSegCnt | read-only | mandatory | The current number of free memory segments. A free memory segment is an unused contiguous memory block of greater than 16 bytes. Generally, an increase in the … |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.4 | ColumnhpGlobalMemAllocSegCnt | read-only | mandatory | The number of currently allocated memory segments. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.5 | ColumnhpGlobalMemTotalBytes | read-only | mandatory | The number of currently installed bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.6 | ColumnhpGlobalMemFreeBytes | read-only | mandatory | The number of available (unallocated) bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.2.2.1.1.7 | ColumnhpGlobalMemAllocBytes | read-only | mandatory | The number of currently allocated bytes. |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.3 | ScalarhpSwitchOsVersion | read-only | mandatory | Contains the operating code version number (also known as software or firmware). For example, a software version such as A.08.01 is described as follows: A the… |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.4 | ScalarhpSwitchRomVersion | read-only | mandatory | Contains the ROM version number (such as A.08.01 is described as follows: A the function set available in your router 08 the common release number 01 updates t… |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.5 | ScalarhpSwitchSmartCardType | read-only | mandatory | Return the type of Smart Cards in the system. Some system may contains more than one types of smart cards, such as FDDI and ATM |
| 1.3.6.1.4.1.11.2.14.11.5.1.1.6 | ScalarhpSwitchBaseMACAddress | read-only | mandatory | Return the base MAC address of the switch. This is also the MAC address of the default vlan. |