NEWTEC-ASIIN-MIB
44 objects
Newtec modular ASI input MIB containing definitions for ASI input functionality.
Imported Objects
| FLOAT-TC-MIB MISSING | Float32TC |
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable NtcPid |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.800 | IdentityntcAsiIn | Newtec modular ASI input MIB containing definitions for ASI input functionality. | ||
| 1.3.6.1.4.1.5835.5.2.800.1 | IdentityntcAsiInObjects | current | Container holding ntcAsiInObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.800.1.1 | ScalarntcAsiInInputSelection | read-write | current | Configuration of the ASI external input interface. |
| 1.3.6.1.4.1.5835.5.2.800.1.2 | ScalarntcAsiInActiveInput | read-only | current | Displays the active ASI input interface. When PRBS is selected it will indicate 'off'. |
| 1.3.6.1.4.1.5835.5.2.800.1.3 | ScalarntcAsiInInlineSplitter | read-write | current | Variable to configure the presence of an external in-line splitter with a given loss. |
| 1.3.6.1.4.1.5835.5.2.800.1.4 | ScalarntcAsiInMeasuredInputTsBitRate | read-only | current | Displays the measured ASI interface input rate in bps. |
| 1.3.6.1.4.1.5835.5.2.800.1.5 | ScalarntcAsiInInputFraming | read-write | current | Configuration of the ASI input framing type. - 188-byte packets - 204-byte packets (188 data bytes and 16 dummy bytes). Before transmission, these 16 bytes are… |
| 1.3.6.1.4.1.5835.5.2.800.1.6 | ScalarntcAsiInInputIfSwitchCount | read-only | current | Counts the number of times the device switched to another ASI input interface. |
| 1.3.6.1.4.1.5835.5.2.800.1.7 | IdentityntcAsiInPrbsGenerator | current | Container holding ntcAsiInPrbsGenerator definitions. | |
| 1.3.6.1.4.1.5835.5.2.800.1.7.1 | ScalarntcAsiInPrbsGenTsBitRate | read-write | current | The PRBS (Pseudo Random Binary Sequence) generator TS Bit Rate in bps. |
| 1.3.6.1.4.1.5835.5.2.800.1.7.2 | ScalarntcAsiInPrbsGenType | read-write | current | - PRBS : Configures the test generator to generate transport stream packets containing PRBS data. The generated PRBS complies with HP3764 Compatible 2^23-1 PRB… |
| 1.3.6.1.4.1.5835.5.2.800.1.7.3 | ScalarntcAsiInPrbsGenPidHandling | read-write | current | Configuration of the PID (Packet Identifier) handling in the PRBS Generator. Configuration of the test generator to generate transport stream packets with a va… |
| 1.3.6.1.4.1.5835.5.2.800.1.7.4 | ScalarntcAsiInPrbsGenPidValue | read-write | current | Configure the PRBS generator packet PID value. |
| 1.3.6.1.4.1.5835.5.2.800.1.7.5 | ScalarntcAsiInPrbsGenNumberDataPkt | read-write | current | Configuration of the number of datapackets per burst. Current devices have an upper limit of 255 datapackets per burst. |
| 1.3.6.1.4.1.5835.5.2.800.1.7.6 | ScalarntcAsiInPrbsGenNumberNullPkt | read-write | current | Configuration of the number of null packets per burst. Current devices have an upper limit of 255 but this may increase in the future. |
| 1.3.6.1.4.1.5835.5.2.800.1.8 | IdentityntcAsiInPrbsMonitor | current | Container holding ntcAsiInPrbsMonitor definitions. | |
| 1.3.6.1.4.1.5835.5.2.800.1.8.1 | ScalarntcAsiInPrbsMonEnable | read-write | current | Enable or disable the PRBS monitoring. When monitoring is enabled the statistics are displayed in the following parameters. |
| 1.3.6.1.4.1.5835.5.2.800.1.8.2 | ScalarntcAsiInPrbsMonPidHandling | read-write | current | Detect/filter out the PID inside data packets of the PRBS monitor. This is reflected in the monitoring statistics. |
| 1.3.6.1.4.1.5835.5.2.800.1.8.3 | ScalarntcAsiInPrbsMonPidValue | read-write | current | Configuration of the PRBS monitor data packet PID value. |
| 1.3.6.1.4.1.5835.5.2.800.1.8.4 | ScalarntcAsiInPrbsMonState | read-only | current | Displays the PRBS monitor status. Possible values are: Off, Unsync (no PRBS sync) and PRBS (PRBS sync). |
| 1.3.6.1.4.1.5835.5.2.800.1.8.5 | ScalarntcAsiInPrbsMonSyncSeconds | read-only | current | Indicates how many seconds the PRBS monitor is synchronized to the PRBS stream. |
| 1.3.6.1.4.1.5835.5.2.800.1.8.6 | ScalarntcAsiInPrbsMonErrorCount | read-only | current | Number of errors detected in the PRBS stream. |
| 1.3.6.1.4.1.5835.5.2.800.1.8.7 | ScalarntcAsiInPrbsMonErrorRate | read-only | current | Error rate detected in the PRBS stream. Float represented as unsigned integer is scaled by a factor of 10. i.e. a value of 100 in SNMP means an error rate of 1… |
| 1.3.6.1.4.1.5835.5.2.800.1.8.8 | ScalarntcAsiInPrbsMonErrorRatio | read-only | current | Displays the error ratio detected in the PRBS stream. |
| 1.3.6.1.4.1.5835.5.2.800.1.9 | IdentityntcAsiInAlarm | current | Container holding ntcAsiInAlarm definitions. | |
| 1.3.6.1.4.1.5835.5.2.800.1.9.1 | ScalarntcAsiInAlmGeneralAsiInput | read-only | current | This alarm is raised when there is a general ASI input alarm. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.9.2 | ScalarntcAsiInAlmNoInputSignal | read-only | current | This alarm is raised when no input signal is detected at the selected ASI input. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.9.3 | ScalarntcAsiInAlmNoInputData | read-only | current | This alarm is raised when no input data is detected at the selected ASI input. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.9.4 | ScalarntcAsiInAlmInvalidTsBitRate | read-only | current | This alarm is raised when the measured input Transport-Stream (TS) bitrate is higher or lower than the expected value. This variable indicates the current stat… |
| 1.3.6.1.4.1.5835.5.2.800.1.9.5 | ScalarntcAsiInAlmBufferOverflow | read-only | current | This alarm is raised when the input data buffer is full. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.9.6 | ScalarntcAsiInAlmNoInputSignalAsi1 | read-only | current | This alarm is raised when no input signal is detected at the ASI1 input. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.9.7 | ScalarntcAsiInAlmNoInputSignalAsi2 | read-only | current | This alarm is raised when no input signal is detected at the ASI2 input. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.9.8 | ScalarntcAsiInAlmNoInputDataAsi1 | read-only | current | This alarm is raised when no input data is detected at the ASI1 input. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.9.9 | ScalarntcAsiInAlmNoInputDataAsi2 | read-only | current | This alarm is raised when no input data is detected at the ASI2 input. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.800.1.10 | ScalarntcAsiInInputTsBitRate | read-write | current | Displays the ASI interface input rate. Expressed in bps. |
| 1.3.6.1.4.1.5835.5.2.800.1.11 | IdentityntcAsiInNpRangeThr | current | Container holding ntcAsiInNpRangeThr definitions. | |
| 1.3.6.1.4.1.5835.5.2.800.1.11.1 | ScalarntcAsiInNpRangeThrEnable | read-write | current | Enable or disable the Null Packet Rate Threshold. |
| 1.3.6.1.4.1.5835.5.2.800.1.11.2 | ScalarntcAsiInNpRangeThrMaxRate | read-write | current | Maximum Null Packets Bit Rate. |
| 1.3.6.1.4.1.5835.5.2.800.1.11.3 | ScalarntcAsiInNpRangeTimeWindow | read-write | current | Specify the time window in seconds. |
| 1.3.6.1.4.1.5835.5.2.800.2 | IdentityntcAsiInConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.800.2.1 | IdentityntcAsiInConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.800.2.1.1 | CompliancentcAsiInConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.800.2.2 | IdentityntcAsiInConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.800.2.2.1 | GroupntcAsiInConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |