NEWTEC-ASIOUT-MIB
24 objects
Newtec modular ASI output MIB containing definitions for ASI output functionality.
Imported Objects
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable NtcPid |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.900 | IdentityntcAsiOut | Newtec modular ASI output MIB containing definitions for ASI output functionality. | ||
| 1.3.6.1.4.1.5835.5.2.900.1 | IdentityntcAsiOutObjects | current | Container holding ntcAsiOutObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.900.1.1 | ScalarntcAsiOutInputSelection | read-write | current | Input selection for the ASI block. It selects which signal has to be sent over the output ASI interface. |
| 1.3.6.1.4.1.5835.5.2.900.1.2 | ScalarntcAsiOutOutputSelection | read-write | current | Configuration of the ASI output connector(s). It is also possible to select several connectors. In this case the same signal is sent to different ASI output co… |
| 1.3.6.1.4.1.5835.5.2.900.1.3 | ScalarntcAsiOutMeasuredTsBitRate | read-only | current | Displays the measured ASI output TS bit rate in bps. |
| 1.3.6.1.4.1.5835.5.2.900.1.4 | IdentityntcAsiOutPrbsGenerator | current | Container holding ntcAsiOutPrbsGenerator definitions. | |
| 1.3.6.1.4.1.5835.5.2.900.1.4.1 | ScalarntcAsiOutPrbsGenOutputTsBitRate | read-write | current | Configure the PRBS generator ASI output TS bit rate value in bps. |
| 1.3.6.1.4.1.5835.5.2.900.1.4.2 | ScalarntcAsiOutPrbsGenType | read-write | current | - PRBS : Configures the test generator to generate transport stream packets containing PRBS data. The generated PRBS complies with HP3764 Compatible 2^23-1 PRB… |
| 1.3.6.1.4.1.5835.5.2.900.1.4.3 | ScalarntcAsiOutPrbsGenPidHandling | read-write | current | Configuration of the PID (Packet Identifier) handling in the PRBS Generator. Configuration of the test generator to generate transport stream packets with a va… |
| 1.3.6.1.4.1.5835.5.2.900.1.4.4 | ScalarntcAsiOutPrbsGenPidValue | read-write | current | Configuration of the PRBS generator data packet PID value. |
| 1.3.6.1.4.1.5835.5.2.900.1.4.5 | ScalarntcAsiOutPrbsGenNumberDataPkt | read-write | current | Configuration of the number of datapackets per burst. Current devices have an upper limit of 255. The number of null packets per burst is also configurable. |
| 1.3.6.1.4.1.5835.5.2.900.1.4.6 | ScalarntcAsiOutPrbsGenNumberNullPkt | read-write | current | Configuration of the number of null packets per burst. Current devices have an upper limit of 255. The number of datapackets is also configurable. |
| 1.3.6.1.4.1.5835.5.2.900.1.5 | IdentityntcAsiOutNcrGenerator | current | Container holding ntcAsiOutNcrGenerator definitions. | |
| 1.3.6.1.4.1.5835.5.2.900.1.5.1 | ScalarntcAsiOutNcrGenOutputTsBitRate | read-write | current | Configure the NCR generator ASI output TS bit rate value in bps. |
| 1.3.6.1.4.1.5835.5.2.900.1.6 | IdentityntcAsiOutAlarm | current | Container holding ntcAsiOutAlarm definitions. | |
| 1.3.6.1.4.1.5835.5.2.900.1.6.1 | ScalarntcAsiOutAlmGeneralAsiOutput | read-only | current | This alarm is raised when there is a general ASI output alarm. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.900.1.6.2 | ScalarntcAsiOutAlmNoOutputSignal | read-only | current | This alarm is raised when no output signal is detected at the selected ASI output. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.900.1.6.3 | ScalarntcAsiOutAlmNoOutputSignalAsi1 | read-only | current | This alarm is raised when no output signal is detected at the ASI1 output. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.900.1.6.4 | ScalarntcAsiOutAlmNoOutputSignalAsi2 | read-only | current | This alarm is raised when no output signal is detected at the ASI2 output. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.900.2 | IdentityntcAsiOutConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.900.2.1 | IdentityntcAsiOutConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.900.2.1.1 | CompliancentcAsiOutConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.900.2.2 | IdentityntcAsiOutConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.900.2.2.1 | GroupntcAsiOutConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |