NEWTEC-BANDWIDTH-CANCELLATION-MIB
32 objects
Newtec modular BANDWIDTH-CANCELLATION MIB
Imported Objects
| FLOAT-TC-MIB MISSING | Float32TC |
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.9100 | IdentityntcBandwidthCancellation | Newtec modular BANDWIDTH-CANCELLATION MIB | ||
| 1.3.6.1.4.1.5835.5.2.9100.1 | IdentityntcBwCObjects | current | Container holding ntcBwCObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.9100.1.1 | IdentityntcBwCAlarm | current | Container holding ntcBwCAlarm definitions. | |
| 1.3.6.1.4.1.5835.5.2.9100.1.1.1 | ScalarntcBwCAlarmNoLock | read-only | current | This alarm is raised when the bandwidth canceller is enabled but not locked This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.9100.1.2 | TablentcBwCCfgTable | not-accessible | current | Configuration table |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1 | RowntcBwCCfgEntry | not-accessible | current | A conceptual row of the ntcBwCCfgTable. |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.1 | ColumnntcBwCCfgName | not-accessible | current | Name of the input configuration |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.2 | ColumnntcBwCCfgEnable | read-write | current | Enable or disable bandwidth cancellation |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.3 | ColumnntcBwCCfgExpRoundTripDelay | read-write | current | Set this to the round trip delay the carrier (that is uplinked, received and cancelled out) will experience. The closer this value is to the actual delay, the … |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.4 | ColumnntcBwCCfgRoundTripDelayUncert | read-write | current | The delay search window that the cancellation function will use to try to acquire full lock. Advised starting value is set to 20 ms but once the actual round t… |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.5 | ColumnntcBwCCfgLocalCenterFreqOffset | read-write | current | The center frequency offset of the received local carrier (that is uplinked, received and cancelled out) |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.6 | ColumnntcBwCCfgLocalCenterFreqUncert | read-write | current | The frequency search window in which the demodulator will search for the received local carrier. By observing the local carrier center frequency offset, this v… |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.7 | ColumnntcBwCCfgLocalSpectralInversion | read-write | current | In case an upconverter or the satellite transponder inverses the spectrum of the carrier, the cancellation function needs to re-inverse the spectrum prior to a… |
| 1.3.6.1.4.1.5835.5.2.9100.1.2.1.8 | ColumnntcBwCCfgBandwidthMode | read-write | current | The Bandwidth Mode sets the range of parameters of the acquisition loops. Use the bandwidth mode to balance search range versus acquisition time. Normal: stand… |
| 1.3.6.1.4.1.5835.5.2.9100.1.3 | TablentcBwCMonTable | not-accessible | current | Monitoring table |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1 | RowntcBwCMonEntry | not-accessible | current | A conceptual row of the ntcBwCMonTable. |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.1 | ColumnntcBwCMonState | read-only | current | The state of the bandwidth cancellation function can be off (in case bandwidth cancellation is disabled), searching (when in the process of acquiring lock) or … |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.2 | ColumnntcBwCMonRoundTripDelay | read-only | current | The measured round trip delay the carrier (that is uplinked and again received) experiences. Use this value to fine tune the control parameter 'Expected round … |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.3 | ColumnntcBwCMonLocalToTotalPowerRatio | read-only | current | The measured ratio between the total received power at the input of the modem and the received local carrier power. |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.4 | ColumnntcBwCMonLocalToRemotePowerRatio | read-only | current | The measured ratio between the remote carrier power and the received local carrier power. |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.5 | ColumnntcBwCMonLocalLevel | read-only | current | The power of the received local carrier (that is uplinked then received) prior to actual cancellation. |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.6 | ColumnntcBwCMonLocalSymbolRate | read-only | current | The measured symbolrate of the local carrier (that is uplink, received and cancelled out). |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.7 | ColumnntcBwCMonLocalFreqOffset | read-only | current | The difference between the set local carrier frequency and the actual detected local carrier frequency. |
| 1.3.6.1.4.1.5835.5.2.9100.1.3.1.8 | ColumnntcBwCMonLocalSpectralInversion | read-only | current | The spectral inversion of the local carrier (that is uplinked and again received) that is applied. This can be either have been set manually or detected automa… |
| 1.3.6.1.4.1.5835.5.2.9100.1.4 | TablentcBwCAlarmStateTable | not-accessible | current | Alarm Status table |
| 1.3.6.1.4.1.5835.5.2.9100.1.4.1 | RowntcBwCAlarmStateEntry | not-accessible | current | A conceptual row of the ntcBwCAlarmStateTable. |
| 1.3.6.1.4.1.5835.5.2.9100.1.4.1.1 | ColumnntcBwCASNoLock | read-only | current | This alarm is raised when the bandwidth canceller is enabled but not locked This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.9100.2 | IdentityntcBwCConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.9100.2.1 | IdentityntcBwCConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.9100.2.1.1 | CompliancentcBwCConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.9100.2.2 | IdentityntcBwCConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.9100.2.2.1 | GroupntcBwCConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |