NEWTEC-BBFOVERIPIN-MIB
60 objects
Newtec modular BBFoverIP input MIB containing definitions for DVB-S2 BaseBand Frames over IP input functionality.
Imported Objects
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.1200 | IdentityntcBbfOverIpIn | Newtec modular BBFoverIP input MIB containing definitions for DVB-S2 BaseBand Frames over IP input functionality. | ||
| 1.3.6.1.4.1.5835.5.2.1200.1 | IdentityntcBbfOIpInObjects | current | Container holding ntcBbfOIpInObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.1200.1.1 | ScalarntcBbfOIpInEnable | read-write | current | Enable or disable BBF over IP reception. |
| 1.3.6.1.4.1.5835.5.2.1200.1.2 | ScalarntcBbfOIpInInputSelection | read-write | current | Configures the input interface for the BBF over IP functionality. |
| 1.3.6.1.4.1.5835.5.2.1200.1.3 | TablentcConfigurationTableTable | not-accessible | current | Configuration table |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1 | RowntcConfigurationTableEntry | not-accessible | current | A conceptual row of the ntcConfigurationTableTable. |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.1 | ColumnntcConfigurationTableName | not-accessible | current | Name of the configuration |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.2 | ColumnntcConfigurationTableRowStatus | read-create | current | The status of this conceptual row. An existing conceptual row can be in any one of the three states, 'notReady', 'notInService', or 'active'. If the manager wi… |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.3 | ColumnntcBbfOIpInEpEnable | read-create | current | Enable or disable a BBF endpoint. |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.4 | ColumnntcBbfOIpInIpEpAddressType | read-create | current | Configuration of the IP address type for BBF over IP reception. (unicast or multicast) |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.5 | ColumnntcBbfOIpInEpMulticastAddress | read-create | current | Multicast IP address used to receive the BBF over IP data. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.6 | ColumnntcBbfOIpInEpIpUdpPort | read-create | current | Configuration of the UDP port on which the BBF over IP is received |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.7 | ColumnntcBbfOIpInEpBbfType | read-create | current | Type of baseband frames which are received in the BBF over IP functionality. |
| 1.3.6.1.4.1.5835.5.2.1200.1.3.1.8 | ColumnntcBbfOIpInEpSourceRedundancy | read-create | current | Enable or disable source redundancy. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4 | IdentityntcBbfOIpInMonitor | current | Container holding ntcBbfOIpInMonitor definitions. | |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.1 | ScalarntcBbfOIpInMonCounterReset | read-write | current | Reset the BBF over IP traffic and monitor counters. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.2 | ScalarntcBbfOIpInMonBbfInputBitRateT | read-only | current | Total BBF over IP input bit rate in bps. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.3 | ScalarntcBbfOIpInMonBbfInCountT | read-only | current | Number of received BBFs. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.4 | ScalarntcBbfOIpInMonBbfOutCountT | read-only | current | Total number of transmitted BBFs. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.5 | ScalarntcBbfOIpInMonBbfDropCountT | read-only | current | Total number of dropped BBFs. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.6 | ScalarntcBbfOIpInMonBbfOverflowCountT | read-only | current | Total number of BBFs that are dropped because the input data buffer is full. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.7 | ScalarntcBbfOIpInMonBbfByteOutCountT | read-only | current | This parameter counts the total number of Baseband Frame bytes properly transmitted |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.8 | ScalarntcBbfOIpInMonBbfInvFrameCountT | read-only | current | Total number of BBFs that are dropped because the received modulation type is not active on the device. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.9 | ScalarntcBbfOIpInMonBbfDiscontCountT | read-only | current | Total number of discontinuity counts over all BBF streams. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.10 | ScalarntcBbfOIpInMonBbfModcodNSCountT | read-only | current | Total number of BBFs which are dropped because the received modcod is not licensed. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11 | TablentcMonitoringTableTable | not-accessible | current | Monitoring table |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1 | RowntcMonitoringTableEntry | not-accessible | current | A conceptual row of the ntcMonitoringTableTable. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.1 | ColumnntcMonitoringTableName | not-accessible | current | Name of the output monitor |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.2 | ColumnntcBbfOIpInMonBbfInputBitRate | read-only | current | BBF over IP input bit rate in bps. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.3 | ColumnntcBbfOIpInMonSourceAddress | read-only | current | Source sending the traffic |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.4 | ColumnntcBbfOIpInMonBbfInCount | read-only | current | Number of received BBFs. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.5 | ColumnntcBbfOIpInMonBbfOutCount | read-only | current | Number of transmitted BBFs. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.6 | ColumnntcBbfOIpInMonBbfByteOutCount | read-only | current | This parameter counts the number of Baseband Frame bytes properly transmitted in a stream. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.7 | ColumnntcBbfOIpInMonBbfDropCount | read-only | current | Number of dropped BBFs. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.8 | ColumnntcBbfOIpInMonBbfOverflowCount | read-only | current | Number of BBFs that are dropped for a specific BBF stream because the input data buffer is full. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.9 | ColumnntcBbfOIpInMonBbfInvFrameCount | read-only | current | Number of BBFs that are dropped because the received modulation type is not active on the device. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.10 | ColumnntcBbfOIpInMonBbfDiscontCount | read-only | current | When the sequence numbers are not continuous for a certain BBF stream this counter will be incremented. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.11 | ColumnntcBbfOIpInMonBbfModNS | read-only | current | Number of BBFs which are dropped because the received modcod is not licensed for a specified BBF stream. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.12 | ColumnntcBbfOIpInMonBbfByteCorCount | read-only | current | This parameter counts the number of corrupted Baseband Frame bytes that are dropped for a certain BBF stream. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.11.1.13 | ColumnntcBbfOIpInMonBbfInvSignCount | read-only | current | This parameter counts the number of invalid Tellitec Signalling Frames that are dropped for a certain BBF stream. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.12 | TablentcAlarmStatusTableTable | not-accessible | current | Alarm status table |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.12.1 | RowntcAlarmStatusTableEntry | not-accessible | current | A conceptual row of the ntcAlarmStatusTableTable. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.1 | ColumnntcStreamInx | not-accessible | current | Name of the alarm monitor |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.2 | ColumnntcBbfOIpInMonBbfNoInpDataError | read-only | current | This alarm is raised when no input data is received between a 1 second time interval for 1 or more BBF streams. This variable indicates the current status of t… |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.3 | ColumnntcBbfOverflowError | read-only | current | This alarm is raised when the input data buffer for 1 or more BBF streams is full. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.4 | ColumnntcBbfDiscontinuityError | read-only | current | The alarm is raised when the sequence numbers are not continuous for a specific ntS2BBF input stream for 5 sec. This variable indicates the current status of t… |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.12.1.5 | ColumnntcBbfModcodNotSupportedError | read-only | current | This alarm is raised when Baseband frames are dropped due to receiving a non licensed modcod. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.13 | ScalarntcBbfOIpInMonBbfByteCorCountT | read-only | current | Total number of corrupted Baseband Frame bytes that are dropped for all BBF streams. |
| 1.3.6.1.4.1.5835.5.2.1200.1.4.14 | ScalarntcBbfOIpInMonBbfInvSignCountT | read-only | current | Total number of invalid Tellitec Signalling Frames that are dropped for all BBF streams. |
| 1.3.6.1.4.1.5835.5.2.1200.1.5 | IdentityntcBbfOIpInAlarm | current | Container holding ntcBbfOIpInAlarm definitions. | |
| 1.3.6.1.4.1.5835.5.2.1200.1.5.1 | ScalarntcBbfOIpInAlmGeneralBbfOverIpIn | read-only | current | This alarm is raised when there is a general BBF over IP Input alarm. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.1200.1.5.2 | ScalarntcBbfOIpInAlmNoInputData | read-only | current | This alarm is raised when no input data is received between a 1 second time interval for 1 or more BBF streams. This variable indicates the current status of t… |
| 1.3.6.1.4.1.5835.5.2.1200.1.5.3 | ScalarntcBbfOIpInAlmBufferOverflow | read-only | current | This alarm is raised when the input data buffer for 1 or more BBF streams is full. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.1200.1.5.4 | ScalarntcBbfOIpInAlBbfOverIPDiscont | read-only | current | The alarm is raised when the sequence numbers are not continuous for a specific ntS2BBF input stream for 5 sec. This variable indicates the current status of t… |
| 1.3.6.1.4.1.5835.5.2.1200.1.5.5 | ScalarntcBbfOIpInAlBbfOverIPModNS | read-only | current | This alarm is raised when Baseband frames are dropped due to receiving a non licensed modcod. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.1200.2 | IdentityntcBbfOIpInConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.1200.2.1 | IdentityntcBbfOIpInConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.1200.2.1.1 | CompliancentcBbfOIpInConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.1200.2.2 | IdentityntcBbfOIpInConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.1200.2.2.1 | GroupntcBbfOIpInConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |