NEWTEC-CONTROLPLANE-MIB
21 objects
Newtec modular Control Plane MIB containing definitions for Control Plane functionality.
Imported Objects
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable NtcNetworkAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.4300 | IdentityntcControlPlane | Newtec modular Control Plane MIB containing definitions for Control Plane functionality. | ||
| 1.3.6.1.4.1.5835.5.2.4300.1 | IdentityntcCtrlPlaneObjects | current | Container holding ntcCtrlPlaneObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.4300.1.1 | ScalarntcCtrlPlaneEnable | read-write | current | Enable or disable the Control Plane functionality. |
| 1.3.6.1.4.1.5835.5.2.4300.1.2 | IdentityntcCtrlPlaneCfg | current | Container holding ntcCtrlPlaneCfg definitions. | |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.1 | ScalarntcCtrlPlaneCfgNomS2ModCod | read-write | current | The MODCOD that the Control Plane uses in S2 mode. |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.2 | ScalarntcCtrlPlaneCfgNomS2EModCod | read-write | current | The MODCOD that the Control Plane uses in S2 Extensions mode. |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.3 | ScalarntcCtrlPlaneCfgFrmTyp | read-write | current | The type of frames for this encapsulator. If the control plane traffic is merged into a user ISI, the frametype is inherited from the user traffic configuratio… |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.4 | ScalarntcCtrlPlaneCfgIsi | read-write | current | The ISI of the channel |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.5 | ScalarntcCtrlPlaneCfgLabel | read-write | current | Label of the destination channel. |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.6 | ScalarntcCtrlPlaneCfgCir | read-write | current | Define the guaranteed bit rate (CIR) for Control Plane data shaping. |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.7 | ScalarntcCtrlPlaneCfgPir | read-write | current | Define the peak bit rate (PIR) for Control Plane data shaping. |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.8 | ScalarntcCtrlPlaneCfgPrio | read-write | current | Define the priority for Control Plane data shaping node when dividing rate between nodes. |
| 1.3.6.1.4.1.5835.5.2.4300.1.2.9 | ScalarntcCtrlPlaneCfgMaxQTime | read-write | current | The maximum time packets are allowed to remain in a shaping queue before being dropped. |
| 1.3.6.1.4.1.5835.5.2.4300.1.3 | ScalarntcCtrlPlaneMasterIp | read-write | current | IP address of Control Plane Master used to obtain Control Plane setup Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) |
| 1.3.6.1.4.1.5835.5.2.4300.1.4 | IdentityntcCtrlPlaneAlarm | current | Container holding ntcCtrlPlaneAlarm definitions. | |
| 1.3.6.1.4.1.5835.5.2.4300.1.4.1 | ScalarntcCtrlPlaneAlmNoMaster | read-only | current | This alarm is raised when the control plane master doesn't respond to the control plane slave's requests. This variable indicates the current status of the ala… |
| 1.3.6.1.4.1.5835.5.2.4300.2 | IdentityntcCtrlPlaneConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.4300.2.1 | IdentityntcCtrlPlaneConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.4300.2.1.1 | CompliancentcCtrlPlaneConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.4300.2.2 | IdentityntcCtrlPlaneConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.4300.2.2.1 | GroupntcCtrlPlaneConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |