MIB Viewer

NEWTEC-DSSOVERIPIN-MIB

32 objects
Newtec modular DSSoIP input MIB containing definitions for DSS over IP input functionality.
Imported Objects
NEWTEC-MAIN-MIBntcFunction
NEWTEC-TC-MIBNtcAlarmState NtcEnable NtcNetworkAddress
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.5835.5.2.8700IdentityntcDssOverIpInNewtec modular DSSoIP input MIB containing definitions for DSS over IP input functionality.
1.3.6.1.4.1.5835.5.2.8700.1IdentityntcDssOIpInObjectscurrentContainer holding ntcDssOIpInObjects definitions.
1.3.6.1.4.1.5835.5.2.8700.1.1ScalarntcDssOIpInEnableread-writecurrentEnable or disable DSS over IP reception.
1.3.6.1.4.1.5835.5.2.8700.1.2ScalarntcDssOIpInInputSelectionread-writecurrentSelect the input interface for the DSS over IP functionality.
1.3.6.1.4.1.5835.5.2.8700.1.3ScalarntcDssOIpInDssEncapProtocolread-writecurrentEncapsulation protocol used for the received DSS over IP functionality (UDP, RTP and RTP with FEC).
1.3.6.1.4.1.5835.5.2.8700.1.4ScalarntcDssOIpInIpAddressTyperead-writecurrentConfiguration of the IP address type for DSS over IP reception. (unicast or multicast)
1.3.6.1.4.1.5835.5.2.8700.1.5ScalarntcDssOIpInMulticastAddressread-writecurrentDefine the multicast IP address used to receive the DSS over IP data functionality. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.8700.1.6ScalarntcDssOIpInUdpPortread-writecurrentConfigure the UDP port on which the DSS over IP stream is received.
1.3.6.1.4.1.5835.5.2.8700.1.7ScalarntcDssOIpInMaxBufferDelayread-writecurrentThe maximum delay introduced by the device to compensate jitter introduced by the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.8700.1.8ScalarntcDssOIpInMulticastSourceAread-writecurrentMulticast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.8700.1.9ScalarntcDssOIpInMulticastSourceBread-writecurrentMulticast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.8700.1.10IdentityntcDssOIpInMonitorcurrentContainer holding ntcDssOIpInMonitor definitions.
1.3.6.1.4.1.5835.5.2.8700.1.10.1ScalarntcDssOIpInMonResetCountersread-writecurrentReset the DSS over IP traffic and monitor counters.
1.3.6.1.4.1.5835.5.2.8700.1.10.2ScalarntcDssOIpInMonInputDssBitRateread-onlycurrentDisplays the measured DSS over IP input DSS bit rate in bps.
1.3.6.1.4.1.5835.5.2.8700.1.10.3ScalarntcDssOIpInMonBufferDelayread-onlycurrentThe delay introduced by the device to compensate the jitter introduced by the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.8700.1.10.4ScalarntcDssOIpInMonMinBufferFillingread-onlycurrentThe measured minimum buffer filling level in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.8700.1.10.5ScalarntcDssOIpInMonMaxBufferFillingread-onlycurrentThe measured maximum buffer filling level in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.8700.1.10.6ScalarntcDssOIpInMonSourceInforead-onlycurrentDisplays the IP address (and UDP port) of the source that is generating the DSS over IP traffic.
1.3.6.1.4.1.5835.5.2.8700.1.10.7ScalarntcDssOIpInMonRtpFecSchemeread-onlycurrentDisplays the type of Rtp FEC Scheme currently used (if any).
1.3.6.1.4.1.5835.5.2.8700.1.10.8ScalarntcDssOIpInMonRtpDropCountread-onlycurrentDisplays the number of dropped RTP packets. (This is only applicable when RTP is used.)
1.3.6.1.4.1.5835.5.2.8700.1.10.9ScalarntcDssOIpInMonRtpRepairCountread-onlycurrentDisplays the number of repaired RTP packets by using the received FEC information. (This is only applicable for RTP with FEC)
1.3.6.1.4.1.5835.5.2.8700.1.10.10ScalarntcDssOIpInMonRtpFecDropCountread-onlycurrentDisplays the number of dropped uncorrectable packets. (This is only applicable when RTP-FEC is used.)
1.3.6.1.4.1.5835.5.2.8700.1.11IdentityntcDssOIpInAlarmcurrentContainer holding ntcDssOIpInAlarm definitions.
1.3.6.1.4.1.5835.5.2.8700.1.11.1ScalarntcDssOIpInAlmNoInputDataread-onlycurrentThis alarm is raised when no input data is received for the DSS over IP functionality. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.8700.1.11.2ScalarntcDssOIpInAlmBufferOverflowread-onlycurrentThis alarm is raised when the input data buffer of DSS over IP is full. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.8700.1.11.3ScalarntcDssOIpInAlmBufferUnflowread-onlycurrentThis alarm is raised when the input data buffer is below the minimum value. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.8700.1.11.4ScalarntcDssOIpInAlmRtpNoSyncread-onlycurrentThis alarm is raised when no valid RTP input data is received. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.8700.2IdentityntcDssOIpInConformancecurrentConformance requirements.
1.3.6.1.4.1.5835.5.2.8700.2.1IdentityntcDssOIpInConfCompliancecurrentDevice compliance statements.
1.3.6.1.4.1.5835.5.2.8700.2.1.1CompliancentcDssOIpInConfCompV1StandardcurrentCompliance statement for Newtec device MIB implementations.
1.3.6.1.4.1.5835.5.2.8700.2.2IdentityntcDssOIpInConfGroupcurrentGroups used by device compliance statements.
1.3.6.1.4.1.5835.5.2.8700.2.2.1GroupntcDssOIpInConfGrpV1StandardcurrentManaged objects that constitute version 1 of a system device with standard capabilities.
MIB Viewer