NEWTEC-DSSOVERIPOUT-MIB
22 objects
Newtec modular DSSoIP output MIB containing definitions for DSS over IP output functionality.
Imported Objects
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable NtcNetworkAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.9300 | IdentityntcDssOverIpOut | Newtec modular DSSoIP output MIB containing definitions for DSS over IP output functionality. | ||
| 1.3.6.1.4.1.5835.5.2.9300.1 | IdentityntcDssOIpOutObjects | current | Container holding ntcDssOIpOutObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.9300.1.1 | IdentityntcDssOIpOutConfiguration | current | Container holding ntcDssOIpOutConfiguration definitions. | |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.1 | ScalarntcDssOIpOutEnable | read-write | current | Enable or disable endpoint DSS over IP output. |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.2 | ScalarntcDssOIpOutDssEncapProtocol | read-write | current | Encapsulation protocol used for the output DSS over IP functionality (UDP or RTP). |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.3 | ScalarntcDssOIpOutDestUdpPort | read-write | current | Configuration of the UDP port on which the DSS over IP is sent |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.4 | ScalarntcDssOIpOutDestIpAddress | read-write | current | The destination IP Address Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.5 | ScalarntcDssOIpOutTtl | read-write | current | Multicast TTL to be set in the transmitted IP multicast packets |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.6 | ScalarntcDssOIpOutDssPacketsInFrame | read-write | current | Number of DSS packets in an UDP frame |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.7 | ScalarntcDssOIpOutRtpFecColumns | read-write | current | Select the RTP FEC Columns (L) to use. This value will also put a limitation on the value of RTP FEC Rows (D), L*D < 100 . |
| 1.3.6.1.4.1.5835.5.2.9300.1.1.8 | ScalarntcDssOIpOutRtpFecRows | read-write | current | Select the RTP FEC Rows (D) to use. This value is limitated by the value of RTP FEC Columns (L), L*D <= 100 . |
| 1.3.6.1.4.1.5835.5.2.9300.1.2 | IdentityntcDssOIpOutMonitoring | current | Container holding ntcDssOIpOutMonitoring definitions. | |
| 1.3.6.1.4.1.5835.5.2.9300.1.2.1 | ScalarntcDssOIpOutCounterReset | read-write | current | Reset the TS over IP out traffic and monitor counters. |
| 1.3.6.1.4.1.5835.5.2.9300.1.2.2 | ScalarntcDssOIpOutBitrate | read-only | current | DSS over IP output bit rate in bps. |
| 1.3.6.1.4.1.5835.5.2.9300.1.3 | IdentityntcDssOIpOutAlarms | current | Container holding ntcDssOIpOutAlarms definitions. | |
| 1.3.6.1.4.1.5835.5.2.9300.1.3.1 | ScalarntcDssOIpOutAlNoOutput | read-only | current | This alarm is raised when there is no output. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.9300.1.3.2 | ScalarntcDssOIpOutAlOutputOverflow | read-only | current | This alarm is raised when the bitrate send out is higher than the max possible for the given interface. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.9300.2 | IdentityntcDssOIpOutConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.9300.2.1 | IdentityntcDssOIpOutConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.9300.2.1.1 | CompliancentcDssOIpOutConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.9300.2.2 | IdentityntcDssOIpOutConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.9300.2.2.1 | GroupntcDssOIpOutConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |