MIB Viewer

NEWTEC-GSEENCAPS-MIB

65 objects
Newtec modular GSEENCAPS input MIB containing definitions for GSE Encapsulation functionality.
Imported Objects
NEWTEC-MAIN-MIBntcFunction
NEWTEC-TC-MIBNtcEnable
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter64 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString RowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.5835.5.2.2100IdentityntcGseEncapsNewtec modular GSEENCAPS input MIB containing definitions for GSE Encapsulation functionality.
1.3.6.1.4.1.5835.5.2.2100.1IdentityntcGseEncObjectscurrentContainer holding ntcGseEncObjects definitions.
1.3.6.1.4.1.5835.5.2.2100.1.1IdentityntcGseEncCarriercurrentContainer holding ntcGseEncCarrier definitions.
1.3.6.1.4.1.5835.5.2.2100.1.1.1ScalarntcGseEncModStandardread-writecurrentThe modulation standard defines the major operating mode of the modulator. - DVB-S : compatible with EN300421 for QPSK and EN301210 for 8 PSK and 16QAM. - DVB-…
1.3.6.1.4.1.5835.5.2.2100.1.1.2ScalarntcGseEncPilotsread-writecurrentDvb Physical Layer Pilot insertion.
1.3.6.1.4.1.5835.5.2.2100.1.1.3ScalarntcGseEncSymbolRateread-writecurrentSymbol rate of the outgoing carrier
1.3.6.1.4.1.5835.5.2.2100.1.1.4IdentityntcGseEncCarLinkOptcurrentContainer holding ntcGseEncCarLinkOpt definitions.
1.3.6.1.4.1.5835.5.2.2100.1.1.4.1ScalarntcGseEncTransModeread-writecurrentTransponder Operation Mode selection.
1.3.6.1.4.1.5835.5.2.2100.1.1.4.2ScalarntcGseEncEquaEnableread-writecurrentSpecify whether modulator (NonLinear) Equalink is enabled.
1.3.6.1.4.1.5835.5.2.2100.1.1.5ScalarntcGseEncStreamModeread-writecurrentSpecify if more than one baseband frame stream is multiplexed into the modulator or not. This sometimes impacts receiver compatibility.
1.3.6.1.4.1.5835.5.2.2100.1.1.6ScalarntcGseEncS2Modcodread-writecurrentThe single-stream modcod for all channels, in S2 mode
1.3.6.1.4.1.5835.5.2.2100.1.1.7ScalarntcGseEncFrameTyperead-writecurrentThe type of frames for this encapsulator.
1.3.6.1.4.1.5835.5.2.2100.1.2IdentityntcGseEncMonitorcurrentContainer holding ntcGseEncMonitor definitions.
1.3.6.1.4.1.5835.5.2.2100.1.2.1TablentcGseEncMonChannelTablenot-accessiblecurrentGSE Channels Monitoring
1.3.6.1.4.1.5835.5.2.2100.1.2.1.1RowntcGseEncMonChannelEntrynot-accessiblecurrentA conceptual row of the ntcGseEncMonChannelTable.
1.3.6.1.4.1.5835.5.2.2100.1.2.1.1.1ColumnntcGseEncMonChannelInxnot-accessiblecurrentThe index of the row (temporary until we have dynamic tables)
1.3.6.1.4.1.5835.5.2.2100.1.2.1.1.2ColumnntcGseEncMonChannelNameread-onlycurrentThe name of the channel
1.3.6.1.4.1.5835.5.2.2100.1.2.1.1.3ColumnntcGseEncMonChannelNominalModcodread-onlycurrentThe initial MODCOD configured for this channel.
1.3.6.1.4.1.5835.5.2.2100.1.2.1.1.4ColumnntcGseEncMonChannelModcodread-onlycurrentThe actual MODCOD used by this channel.
1.3.6.1.4.1.5835.5.2.2100.1.2.1.1.5ColumnntcGseEncMonChannelModcodChangesread-onlycurrentNumber of times the MODCOD has changed.
1.3.6.1.4.1.5835.5.2.2100.1.2.1.1.6ColumnntcGseEncProtocolread-onlycurrentThe encapsulation protocol.
1.3.6.1.4.1.5835.5.2.2100.1.3TablentcGseEncapsTablenot-accessiblecurrentA table containing the ntcGseEncaps
1.3.6.1.4.1.5835.5.2.2100.1.3.1RowntcGseEncapsEntrynot-accessiblecurrentA conceptual row of the ntcGseEncapsTable.
1.3.6.1.4.1.5835.5.2.2100.1.3.1.1ColumnntcGseEncapsIsinot-accessiblecurrentThe ISI that identifies this encapsulator (table key).
1.3.6.1.4.1.5835.5.2.2100.1.3.1.2ColumnntcGseEncapsRowStatusread-createcurrentThe status of this conceptual row. An existing conceptual row can be in any one of the three states, 'notReady', 'notInService', or 'active'. If the manager wi…
1.3.6.1.4.1.5835.5.2.2100.1.3.1.3ColumnntcGseEncapsEnableread-createcurrentEnable or disable the corresponding encapsulator.
1.3.6.1.4.1.5835.5.2.2100.1.3.1.4ColumnntcGseEncapsFrmTpread-createcurrentThe type of frames for this encapsulator.
1.3.6.1.4.1.5835.5.2.2100.1.4TablentcGseEncChannelsTablenot-accessiblecurrentA table containing the ntcGseEncChannels
1.3.6.1.4.1.5835.5.2.2100.1.4.1RowntcGseEncChannelsEntrynot-accessiblecurrentA conceptual row of the ntcGseEncChannelsTable.
1.3.6.1.4.1.5835.5.2.2100.1.4.1.1ColumnntcGseEncChannelsNamenot-accessiblecurrentThe name of the channel
1.3.6.1.4.1.5835.5.2.2100.1.4.1.2ColumnntcGseEncChannelsRowStatusread-createcurrentThe status of this conceptual row. An existing conceptual row can be in any one of the three states, 'notReady', 'notInService', or 'active'. If the manager wi…
1.3.6.1.4.1.5835.5.2.2100.1.4.1.3ColumnntcGseEncChanEnableread-createcurrentEnable or disable the corresponding destination channel.
1.3.6.1.4.1.5835.5.2.2100.1.4.1.4ColumnntcGseEncChanIsiread-createcurrentThe ISI of the channel
1.3.6.1.4.1.5835.5.2.2100.1.4.1.5ColumnntcGseEncChanLabelread-createcurrentLabel of the destination channel or the special identifier 'multicast'.
1.3.6.1.4.1.5835.5.2.2100.1.4.1.6ColumnntcGseEncChanNomS2Modcodread-createcurrentThe initial MODCOD that this channel uses in S2 mode.
1.3.6.1.4.1.5835.5.2.2100.1.4.1.7ColumnntcGseEncChanNomS2ExtModcodread-createcurrentThe initial MODCOD that this channel uses in S2 Extensions mode.
1.3.6.1.4.1.5835.5.2.2100.1.4.1.8ColumnntcGseEncChanAcmEnableread-createcurrentEnable or disable the ACM for this channel. This only takes effect when the encapsulator ACM is on.
1.3.6.1.4.1.5835.5.2.2100.1.4.1.9ColumnntcGseEncChanTermNameread-createcurrentThe name of the terminal to which this channel is configured
1.3.6.1.4.1.5835.5.2.2100.1.5TablentcGseEncIsisTablenot-accessiblecurrentA table containing the ntcGseEncIsis
1.3.6.1.4.1.5835.5.2.2100.1.5.1RowntcGseEncIsisEntrynot-accessiblecurrentA conceptual row of the ntcGseEncIsisTable.
1.3.6.1.4.1.5835.5.2.2100.1.5.1.1ColumnntcGseEncIsisNamenot-accessiblecurrentThe name of the Isi
1.3.6.1.4.1.5835.5.2.2100.1.5.1.2ColumnntcGseEncIsisRowStatusread-createcurrentThe status of this conceptual row. An existing conceptual row can be in any one of the three states, 'notReady', 'notInService', or 'active'. If the manager wi…
1.3.6.1.4.1.5835.5.2.2100.1.5.1.3ColumnntcGseEncIsiEnableread-createcurrentEnable or disable the corresponding encapsulator.
1.3.6.1.4.1.5835.5.2.2100.1.5.1.4ColumnntcGseEncIsiIsiread-createcurrentThe ISI that identifies this encapsulator (table key).
1.3.6.1.4.1.5835.5.2.2100.1.5.1.5ColumnntcGseEncIsiFrmTpread-createcurrentThe type of frames for this encapsulator.
1.3.6.1.4.1.5835.5.2.2100.1.5.1.6ColumnntcGseEncIsiProtocolread-createcurrentThe baseband frame encapsulation protocol.
1.3.6.1.4.1.5835.5.2.2100.1.6TablentcGseEncBbfChannelsTablenot-accessiblecurrentA table containing the ntcGseEncBbfChannels
1.3.6.1.4.1.5835.5.2.2100.1.6.1RowntcGseEncBbfChannelsEntrynot-accessiblecurrentA conceptual row of the ntcGseEncBbfChannelsTable.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.1ColumnntcGseEncBbfChannelsNamenot-accessiblecurrentThe name of the channel
1.3.6.1.4.1.5835.5.2.2100.1.6.1.2ColumnntcGseEncBbfChannelsRowStatusread-createcurrentThe status of this conceptual row. An existing conceptual row can be in any one of the three states, 'notReady', 'notInService', or 'active'. If the manager wi…
1.3.6.1.4.1.5835.5.2.2100.1.6.1.3ColumnntcGseEncBbfChanEnableread-createcurrentEnable or disable the corresponding destination channel.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.4ColumnntcGseEncBbfChanOutTypeNameread-createcurrentThe output type of the encapsulation channel.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.5ColumnntcGseEncBbfChanOutInstanceNameread-createcurrentThe output instance name.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.6ColumnntcGseEncBbfChanLabelread-createcurrentLabel of the destination channel or the special identifier 'multicast'.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.7ColumnntcGseEncBbfChanNomS2Modcodread-createcurrentThe initial MODCOD that this channel uses in S2 mode.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.8ColumnntcGseEncBbfChanNomS2ExtModcodread-createcurrentThe initial MODCOD that this channel uses in S2 Extensions mode.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.9ColumnntcGseEncBbfChanAcmEnableread-createcurrentEnable or disable the ACM for this channel. This only takes effect when the encapsulator ACM is on.
1.3.6.1.4.1.5835.5.2.2100.1.6.1.10ColumnntcGseEncBbfChanTermNameread-createcurrentThe name of the terminal to which this channel is configured
1.3.6.1.4.1.5835.5.2.2100.1.6.1.11ColumnntcGseEncBbfChanAccessVlanread-createcurrentIf a non-zero Access VLAN is associated to an encapsulation channel, traffic from this VLAN is transmitted untagged to the channel.
1.3.6.1.4.1.5835.5.2.2100.1.7ScalarntcGseEncDefEncProtread-writecurrentThe default baseband frame encapsulation protocol.
1.3.6.1.4.1.5835.5.2.2100.2IdentityntcGseEncConformancecurrentConformance requirements.
1.3.6.1.4.1.5835.5.2.2100.2.1IdentityntcGseEncConfCompliancecurrentDevice compliance statements.
1.3.6.1.4.1.5835.5.2.2100.2.1.1CompliancentcGseEncConfCompV1StandardcurrentCompliance statement for Newtec device MIB implementations.
1.3.6.1.4.1.5835.5.2.2100.2.2IdentityntcGseEncConfGroupcurrentGroups used by device compliance statements.
1.3.6.1.4.1.5835.5.2.2100.2.2.1GroupntcGseEncConfGrpV1StandardcurrentManaged objects that constitute version 1 of a system device with standard capabilities.