MIB Viewer

NEWTEC-MULTI-DEMOD-MIB

168 objects
Newtec modular DVB multi-demodulator MIB containing definitions for DVB-S2 and S2-Extensions and newer demodulator functionality.
Imported Objects
FLOAT-TC-MIB MISSINGFloat32TC
NEWTEC-MAIN-MIBntcFunction
NEWTEC-TC-MIBNtcAlarmState NtcEnable
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString RowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.5835.5.2.3300IdentityntcMultiDemodulatorNewtec modular DVB multi-demodulator MIB containing definitions for DVB-S2 and S2-Extensions and newer demodulator functionality.
1.3.6.1.4.1.5835.5.2.3300.1IdentityntcMultiDemodObjectscurrentContainer holding ntcMultiDemodObjects definitions.
1.3.6.1.4.1.5835.5.2.3300.1.1IdentityntcMultiDemodAlarmcurrentContainer holding ntcMultiDemodAlarm definitions.
1.3.6.1.4.1.5835.5.2.3300.1.1.1ScalarntcMultiDemodAlmGeneralDemodread-onlycurrentThis alarm is raised when there is a general Demodulator alarm. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.1.2ScalarntcMultiDemodAlmInternalErrorread-onlycurrentThis alarm is raised when there is a internal error Demodulator alarm. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.1.3ScalarntcMultiDemodAlmInputSaturatedread-onlycurrentThis alarm indicates that the L-band input power is too high This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.1.4ScalarntcMultiDemodAlmNoLockread-onlycurrentThis alarm is raised when the demodulator cannot lock on the received carrier This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.1.5ScalarntcMultiDemodAlmLnbPowerControlread-onlycurrentThis alarm is raised when an error occurs in the LNB power supply. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.1.6ScalarntcMultiDemodAlmDecoderOvrloadread-onlycurrentThis alarm is raised when the decoder is overloaded This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.1.7ScalarntcMultiDemodAlmNoPlLockread-onlycurrentThis alarm indicates that the demodulator cannot lock to the physical layer headers This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.1.8ScalarntcMultiDemodAlmBufferOverflowread-onlycurrentThis alarm is raised when the demodulator encoutered an internal buffer overflow This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.2TablentcMultiDemodAlarmStateTablenot-accessiblecurrentAlarm Status Table
1.3.6.1.4.1.5835.5.2.3300.1.2.1RowntcMultiDemodAlarmStateEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodAlarmStateTable.
1.3.6.1.4.1.5835.5.2.3300.1.2.1.1ColumnntcMultiDemodASDemodIdnot-accessiblecurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.2.1.2ColumnntcMultiDemodASGeneralDemodread-onlycurrentThis alarm is raised when there is a general Demodulator alarm. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.2.1.3ColumnntcMultiDemodASInternalErrorread-onlycurrentThis alarm is raised when there is a internal error Demodulator alarm. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.2.1.4ColumnntcMultiDemodASInputSaturatedread-onlycurrentThis alarm indicates that the L-band input power is too high This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.2.1.5ColumnntcMultiDemodASNoPlLockread-onlycurrentThis alarm indicates that the demodulator cannot lock to the physical layer headers This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.2.1.6ColumnntcMultiDemodASNoLockread-onlycurrentThis alarm is raised when the demodulator cannot lock on the received carrier This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.2.1.7ColumnntcMultiDemodASLnbPowerControlread-onlycurrentThis alarm is raised when an error occurs in the LNB power supply. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.2.1.8ColumnntcMultiDemodASDecoderOverloadedread-onlycurrentThis alarm is raised when the decoder is overloaded This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.3300.1.3TablentcMultiDemodCfgTablenot-accessiblecurrentThe configuration table.
1.3.6.1.4.1.5835.5.2.3300.1.3.1RowntcMultiDemodCfgEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodCfgTable.
1.3.6.1.4.1.5835.5.2.3300.1.3.1.1ColumnntcMultiDemodCfgDemodIdnot-accessiblecurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.3.1.2ColumnntcMultiDemodCfgEnableread-writecurrentEnable or disable the demodulator function
1.3.6.1.4.1.5835.5.2.3300.1.3.1.3ColumnntcMultiDemodCfgModeread-writecurrentThe modulation standard defines the operating mode of the demodulator. - DVB-S : compatible with DVB-S/DVB-DSNG modulation - DVB-S2 : compatible with EN302307 …
1.3.6.1.4.1.5835.5.2.3300.1.3.1.4ColumnntcMultiDemodCfgInputFrequencyread-writecurrentDemodulator input frequency setting. Current devices support a frequency range of 950000000 to 2150000000 Hz.
1.3.6.1.4.1.5835.5.2.3300.1.3.1.5ColumnntcMultiDemodCfgSymbolRateread-writecurrentSymbol rate of the received carrier
1.3.6.1.4.1.5835.5.2.3300.1.3.1.6ColumnntcMultiDemodCfgRollOffread-writecurrentThe receive filter Roll-off factor setting determines the spectrum excess bandwidth by controlling the RCRO (Root Cosine Roll-off) factor of the matched filter…
1.3.6.1.4.1.5835.5.2.3300.1.3.1.7ColumnntcMultiDemodCfgInputSelectionread-writecurrentToggle the demodulator input between L-BAND Rx A/B or IF Rx
1.3.6.1.4.1.5835.5.2.3300.1.3.1.8ColumnntcMultiDemodCfgSpectralInvread-writecurrentSpectral inversion
1.3.6.1.4.1.5835.5.2.3300.1.3.1.9ColumnntcMultiDemodCfgPlScrambSigread-writecurrentThe physical layer scrambler signature.
1.3.6.1.4.1.5835.5.2.3300.1.3.1.10ColumnntcMultiDemodCfgLnbPowerSupplyread-writecurrentLNB Power Supply and Tone selection.
1.3.6.1.4.1.5835.5.2.3300.1.3.1.11ColumnntcMultiDemodCfgHardwareIdread-onlycurrentDemodulator hardware identification.
1.3.6.1.4.1.5835.5.2.3300.1.3.1.12ColumnntcMultiDemodCfgModCodDvbsread-writecurrentThe selection of the FEC code-rate and modulation scheme supported by DVB-S
1.3.6.1.4.1.5835.5.2.3300.1.3.1.13ColumnntcMultiDemodCfgStreamModeread-writecurrentSpecify if more than one input stream is multiplexed into the modulator or not. This sometimes impacts receiver compatibility.
1.3.6.1.4.1.5835.5.2.3300.1.3.1.14ColumnntcMultiDemodCfgInterfaceRateread-onlycurrentCalculated Interface Rate
1.3.6.1.4.1.5835.5.2.3300.1.3.1.15ColumnntcMultiDemodCfgAcqRangeread-writecurrentDemodulator acquisition range. Actual applied range limited to 150% of symbolrate..
1.3.6.1.4.1.5835.5.2.3300.1.3.1.16ColumnntcMultiDemodCfgPlhdrScramSeqread-writecurrentPhysical layer scrambling sequence key
1.3.6.1.4.1.5835.5.2.3300.1.3.1.17ColumnntcMultiDemodCfgRfFrequencyread-writecurrentRF frequency
1.3.6.1.4.1.5835.5.2.3300.1.3.1.18ColumnntcMultiDemodCfgModCodAmcDlread-writecurrentThe selection of the FEC code-rate and modulation scheme supported by AMC-DL
1.3.6.1.4.1.5835.5.2.3300.1.3.1.19ColumnntcMultiDemodCfgLnbClockRefread-writecurrentEnables or disables the transmission of a 10MHz clock signal on the LNB input cable.
1.3.6.1.4.1.5835.5.2.3300.1.4TablentcExtMultiDemodCfgTablenot-accessiblecurrentThe Extended configuration table.
1.3.6.1.4.1.5835.5.2.3300.1.4.1RowntcExtMultiDemodCfgEntrynot-accessiblecurrentA conceptual row of the ntcExtMultiDemodCfgTable.
1.3.6.1.4.1.5835.5.2.3300.1.4.1.1ColumnntcExtMultiDemodCfgDemodIdnot-accessiblecurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.4.1.2ColumnntcExtMultiDemodCfgOpModeread-writecurrentTransponder Operation Mode selection.
1.3.6.1.4.1.5835.5.2.3300.1.5TablentcMultiDemodMonTablenot-accessiblecurrentThe Monitoring table.
1.3.6.1.4.1.5835.5.2.3300.1.5.1RowntcMultiDemodMonEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodMonTable.
1.3.6.1.4.1.5835.5.2.3300.1.5.1.1ColumnntcMultiDemodMonDemodIdnot-accessiblecurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.5.1.2ColumnntcMultiDemodMonLbandInputLvlread-onlycurrentInput level measured on the full L-band range. A value of -1000 indicates that the measurement is unreliably low.
1.3.6.1.4.1.5835.5.2.3300.1.5.1.3ColumnntcMultiDemodMonCarrierInputLvlread-onlycurrentInput level measured on the selected carrier
1.3.6.1.4.1.5835.5.2.3300.1.5.1.4ColumnntcMultiDemodMonEsNoread-onlycurrentReceived Es/No Header
1.3.6.1.4.1.5835.5.2.3300.1.5.1.5ColumnntcMultiDemodMonPhaseNoiseIndicread-onlycurrentPhaseNoiseIndication
1.3.6.1.4.1.5835.5.2.3300.1.5.1.6ColumnntcMultiDemodMonOffRefMaskread-onlycurrentOffset To Reference Mask
1.3.6.1.4.1.5835.5.2.3300.1.5.1.7ColumnntcMultiDemodMonNonLinIndicread-onlycurrentThis value gives an indication of the non-linearity PM of the carrier
1.3.6.1.4.1.5835.5.2.3300.1.5.1.8ColumnntcMultiDemodMonSymbolRateread-onlycurrentTracked Symbol Rate of the received carrier
1.3.6.1.4.1.5835.5.2.3300.1.5.1.9ColumnntcMultiDemodMonCarrierOffsetread-onlycurrentCarrierOffset
1.3.6.1.4.1.5835.5.2.3300.1.5.1.10ColumnntcMultiDemodMonFrameCounterread-onlycurrentFrame counter
1.3.6.1.4.1.5835.5.2.3300.1.5.1.11ColumnntcMultiDemodMonDummyFrameCtrread-onlycurrentDummy PL frame counter
1.3.6.1.4.1.5835.5.2.3300.1.5.1.12ColumnntcMultiDemodMonErroredFrameCtrread-onlycurrentErrored frame counter
1.3.6.1.4.1.5835.5.2.3300.1.5.1.13ColumnntcMultiDemodMonCycleSlipCtrread-onlycurrentCycle Slip counter
1.3.6.1.4.1.5835.5.2.3300.1.5.1.14ColumnntcMultiDemodMonLastModCodread-onlycurrentThe most recently seen MODCOD
1.3.6.1.4.1.5835.5.2.3300.1.5.1.15ColumnntcMultiDemodModCodStatsResetread-writecurrentReset MODCOD statistics
1.3.6.1.4.1.5835.5.2.3300.1.5.1.16ColumnntcMultiDemodMonVberread-onlycurrentViterbi Bit Error Rate
1.3.6.1.4.1.5835.5.2.3300.1.5.1.17ColumnntcMultiDemodMonBerread-onlycurrentThe estimated bit error rate of the output data.
1.3.6.1.4.1.5835.5.2.3300.1.5.1.18ColumnntcMultiDemodMonEbNoread-onlycurrentReceived Eb/No
1.3.6.1.4.1.5835.5.2.3300.1.5.1.19ColumnntcMultiDemodMonLinkMarginread-onlycurrentLink margin
1.3.6.1.4.1.5835.5.2.3300.1.5.1.20ColumnntcMultiDemodMonOperationalStateread-onlycurrentIdentify the actual operational state of the component instance - Operational: Component instance ready for use - Failed: The component instance has 1 or more …
1.3.6.1.4.1.5835.5.2.3300.1.5.1.21ColumnntcMultiDemodMonLastNonDumModCodread-onlycurrentThe most recently seen MODCOD
1.3.6.1.4.1.5835.5.2.3300.1.5.1.22ColumnntcMultiDemodMonRollOffread-onlycurrentThe receive filter Roll-off factor setting determines the spectrum excess bandwidth by controlling the RCRO (Root Cosine Roll-off) factor of the matched filter…
1.3.6.1.4.1.5835.5.2.3300.1.5.1.23ColumnntcMultiDemodMonQefMread-onlycurrentQEF Margin
1.3.6.1.4.1.5835.5.2.3300.1.5.1.24ColumnntcMultiDemodMonSpectralInvread-onlycurrentDetected spectral inversion
1.3.6.1.4.1.5835.5.2.3300.1.5.1.25ColumnntcMultiDemodMonVberClpread-onlycurrentValue Status.
1.3.6.1.4.1.5835.5.2.3300.1.5.1.26ColumnntcMultiDemodMonBerClpread-onlycurrentValue Status.
1.3.6.1.4.1.5835.5.2.3300.1.5.1.27ColumnntcMultiDemodMonQefMClpread-onlycurrentValue Status.
1.3.6.1.4.1.5835.5.2.3300.1.5.1.28ColumnntcMultiDemodMonEbNoClpread-onlycurrentValue Status.
1.3.6.1.4.1.5835.5.2.3300.1.5.1.29ColumnntcMultiDemodMonNonLinIndicAMread-onlycurrentThis value gives an indication of the non-linearity AM of the carrier
1.3.6.1.4.1.5835.5.2.3300.1.6TablentcMultiDemodStatsTablenot-accessiblecurrentMODCOD statistics table
1.3.6.1.4.1.5835.5.2.3300.1.6.1RowntcMultiDemodStatsEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodStatsTable.
1.3.6.1.4.1.5835.5.2.3300.1.6.1.1ColumnntcMultiDemodStatsInxnot-accessiblecurrentThe index of the row
1.3.6.1.4.1.5835.5.2.3300.1.6.1.2ColumnntcMultiDemodStatsDemodIdread-onlycurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.6.1.3ColumnntcMultiDemodStatsModCodread-onlycurrentModulation & coding scheme (MODCOD).
1.3.6.1.4.1.5835.5.2.3300.1.6.1.4ColumnntcMultiDemodStatsFrameTyperead-onlycurrentDvb-S2 defines 2 FEC-frame types : - normal: FECframes of 64800 bits or 8100 bytes - short: FECframes of 16200 bits or 2025 bytes Short frames are used when wo…
1.3.6.1.4.1.5835.5.2.3300.1.6.1.5ColumnntcMultiDemodStatsPilotsread-onlycurrentIndicates presence of pilots for the received modcod.
1.3.6.1.4.1.5835.5.2.3300.1.6.1.6ColumnntcMultiDemodStatsFrameCtrread-onlycurrentFrame counter
1.3.6.1.4.1.5835.5.2.3300.1.6.1.7ColumnntcMultiDemodStatsErrFrameCtrread-onlycurrentErrored frame counter
1.3.6.1.4.1.5835.5.2.3300.1.6.1.8ColumnntcMultiDemodStatsCycleSlipCtrread-onlycurrentCycle Slip counter
1.3.6.1.4.1.5835.5.2.3300.1.6.1.9ColumnntcMultiDemodStatsPacketErrRatioread-onlycurrentRatio of error frames over total received frames. i.e. Error Frame Count divided by Frame Count.
1.3.6.1.4.1.5835.5.2.3300.1.6.1.10ColumnntcMultiDemodStatsLinkMarginread-onlycurrentlink margin
1.3.6.1.4.1.5835.5.2.3300.1.6.1.11ColumnntcMultiDemodStatsCoNread-onlycurrentCoN
1.3.6.1.4.1.5835.5.2.3300.1.6.1.12ColumnntcMultiDemodStatsCoDread-onlycurrentC/D (carrier to distortion ratio)
1.3.6.1.4.1.5835.5.2.3300.1.6.1.13ColumnntcMultiDemodStatsCoDpilotsread-onlydeprecatedC/D on pilots
1.3.6.1.4.1.5835.5.2.3300.1.6.1.14ColumnntcMultiDemodStatsCoNDread-onlycurrentCoND
1.3.6.1.4.1.5835.5.2.3300.1.6.1.15ColumnntcMultiDemodStatsCoNDpilotsread-onlydeprecatedCoND on pilots
1.3.6.1.4.1.5835.5.2.3300.1.7IdentityntcMultiDemodCmCfgcurrentContainer holding ntcMultiDemodCmCfg definitions.
1.3.6.1.4.1.5835.5.2.3300.1.7.1ScalarntcMultiDemodCmCfgInputSelectionread-writecurrentToggle the demodulator input between L-BAND Rx A/B or IF Rx
1.3.6.1.4.1.5835.5.2.3300.1.7.2ScalarntcMultiDemodCmCfgLnbPowerSupplyread-writecurrentLNB Power Supply and Tone selection.
1.3.6.1.4.1.5835.5.2.3300.1.8IdentityntcMultiDemodCmMoncurrentContainer holding ntcMultiDemodCmMon definitions.
1.3.6.1.4.1.5835.5.2.3300.1.8.1ScalarntcMultiDemodCmMonLbandInputLvlread-onlycurrentInput level measured on the full L-band range. A value of -1000 indicates that the measurement is unreliably low.
1.3.6.1.4.1.5835.5.2.3300.1.9TablentcMultiDemodEqCliCfgTablenot-accessiblecurrentThe Equalink Client configuration table.
1.3.6.1.4.1.5835.5.2.3300.1.9.1RowntcMultiDemodEqCliCfgEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodEqCliCfgTable.
1.3.6.1.4.1.5835.5.2.3300.1.9.1.1ColumnntcMultiDemodEqCfgEnableread-writecurrentEnable or disable the demodulator function
1.3.6.1.4.1.5835.5.2.3300.1.10TablentcMultiDemodBuCarCfgTablenot-accessiblecurrentBackup Carrier Configuration table
1.3.6.1.4.1.5835.5.2.3300.1.10.1RowntcMultiDemodBuCarCfgEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodBuCarCfgTable.
1.3.6.1.4.1.5835.5.2.3300.1.10.1.1ColumnntcMultiDemodBuCarCfgEnableread-writecurrentEnable or disable carrier switching between the main demodulator carrier and the backup demodulator carrier.
1.3.6.1.4.1.5835.5.2.3300.1.10.1.2ColumnntcMultiDemodBuCarCfgInpFreqread-writecurrentBackup carrier input frequency setting.
1.3.6.1.4.1.5835.5.2.3300.1.10.1.3ColumnntcMultiDemodBuCarCfgSymbolRateread-writecurrentSymbol rate of the backup carrier
1.3.6.1.4.1.5835.5.2.3300.1.10.1.4ColumnntcMultiDemodBuCarCfgSwitchTmoread-writecurrentThis switch timeout defines the period in seconds, after configuring the active carrier or after switching between the main and backup carrier, when carrier sw…
1.3.6.1.4.1.5835.5.2.3300.1.10.1.5ColumnntcMultiDemodBuCarCfgRfFreqread-writecurrentBackup carrier RF frequency
1.3.6.1.4.1.5835.5.2.3300.1.11TablentcMultiDemodBuCarMonTablenot-accessiblecurrentBackup Carrier Monitoring Table
1.3.6.1.4.1.5835.5.2.3300.1.11.1RowntcMultiDemodBuCarMonEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodBuCarMonTable.
1.3.6.1.4.1.5835.5.2.3300.1.11.1.1ColumnntcMultiDemodBuCarMonDemodIdnot-accessiblecurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.11.1.2ColumnntcMultiDemodBuCarMonActiveCarread-onlycurrentDisplays if either the main or the backup carrier is active.
1.3.6.1.4.1.5835.5.2.3300.1.11.1.3ColumnntcMultiDemodBuCarMonSwitchCntread-onlycurrentCounts the number of times the device switched between the main and backup demodulator carrier.
1.3.6.1.4.1.5835.5.2.3300.1.12TablentcMultiDemodNlpdCliCfgTablenot-accessiblecurrentNon-Linear Post Compensation Configuration table
1.3.6.1.4.1.5835.5.2.3300.1.12.1RowntcMultiDemodNlpdCliCfgEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodNlpdCliCfgTable.
1.3.6.1.4.1.5835.5.2.3300.1.12.1.1ColumnntcMultiDemodNldCfgEnableread-writecurrentEnable or disable the NLPC function (in case operational mode is Multiple)
1.3.6.1.4.1.5835.5.2.3300.1.12.1.2ColumnntcMultiDemodNldCfgTrCenFreqread-writecurrentTransponder Center RF frequency setting.
1.3.6.1.4.1.5835.5.2.3300.1.12.1.3ColumnntcMultiDemodNldCfgTrBandwread-writecurrentTransponder Bandwidth expressed im Mhz.
1.3.6.1.4.1.5835.5.2.3300.1.12.1.4ColumnntcMultiDemodNldCfgEnaSingleread-writecurrentEnable or disable the NLPC function (in case operational mode is Single (linear or non-linear))
1.3.6.1.4.1.5835.5.2.3300.1.13TablentcMultiDemodExtConvTablenot-accessiblecurrentExternal Converter Configuration table
1.3.6.1.4.1.5835.5.2.3300.1.13.1RowntcMultiDemodExtConvEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodExtConvTable.
1.3.6.1.4.1.5835.5.2.3300.1.13.1.1ColumnntcMultiDemodExtConvEnableread-writecurrentEnable or disable the demodulator function
1.3.6.1.4.1.5835.5.2.3300.1.13.1.2ColumnntcMultiDemodExtConvLoFrequencyread-writecurrentLO frequency
1.3.6.1.4.1.5835.5.2.3300.1.13.1.3ColumnntcMultiDemodExtConvSpectralInvread-writecurrentSpecifies in the external LO converter inverts the spectrum or not.
1.3.6.1.4.1.5835.5.2.3300.1.14IdentityntcMultiDemodCmConvcurrentContainer holding ntcMultiDemodCmConv definitions.
1.3.6.1.4.1.5835.5.2.3300.1.14.1ScalarntcMultiDemodCmConvEnableread-writecurrentEnable or disable the demodulator function
1.3.6.1.4.1.5835.5.2.3300.1.14.2ScalarntcMultiDemodCmConvLoFrequencyread-writecurrentLO frequency
1.3.6.1.4.1.5835.5.2.3300.1.14.3ScalarntcMultiDemodCmConvSpectralInvread-writecurrentSpecifies in the external LO converter inverts the spectrum or not.
1.3.6.1.4.1.5835.5.2.3300.1.15TablentcMultiDemodAesConfTablenot-accessiblecurrentAES Configuration table
1.3.6.1.4.1.5835.5.2.3300.1.15.1RowntcMultiDemodAesConfEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodAesConfTable.
1.3.6.1.4.1.5835.5.2.3300.1.15.1.1ColumnntcMultiDemodAesConfEnableread-writecurrentEnable or disable the demodulator function
1.3.6.1.4.1.5835.5.2.3300.1.15.1.2ColumnntcMultiDemodAesConfGlbEncryptread-writecurrentEnable or disable the global encryption mode, disabled means per stream (ISI)
1.3.6.1.4.1.5835.5.2.3300.1.15.1.3ColumnntcMultiDemodAesConfKeyStrenread-writecurrentSpecify the key strength to use
1.3.6.1.4.1.5835.5.2.3300.1.15.1.4ColumnntcMultiDemodAesConfGrpKeyread-writecurrentThe group key which is used to encrypt/decrypt the even/odd content protection key. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9…
1.3.6.1.4.1.5835.5.2.3300.1.15.1.5ColumnntcMultiDemodAesConfClrKeysread-writecurrentErase all the keys
1.3.6.1.4.1.5835.5.2.3300.1.16TablentcMultiDemodAesGConfTablenot-accessiblecurrentThe AES Global Mode Key configuration table.
1.3.6.1.4.1.5835.5.2.3300.1.16.1RowntcMultiDemodAesGConfEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodAesGConfTable.
1.3.6.1.4.1.5835.5.2.3300.1.16.1.1ColumnntcMultiDemodAesGConfEncEKeyread-writecurrentThe even encrypted key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}…
1.3.6.1.4.1.5835.5.2.3300.1.16.1.2ColumnntcMultiDemodAesGConfEncOKeyread-writecurrentThe odd encrypted key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}$)
1.3.6.1.4.1.5835.5.2.3300.1.16.1.3ColumnntcMultiDemodAesGConfEKeyread-writecurrentThe even key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}$)
1.3.6.1.4.1.5835.5.2.3300.1.16.1.4ColumnntcMultiDemodAesGConfOKeyread-writecurrentThe odd key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}$)
1.3.6.1.4.1.5835.5.2.3300.1.17TablentcMultiDemodAesSConfTablenot-accessiblecurrentThe AES stream configuration table.
1.3.6.1.4.1.5835.5.2.3300.1.17.1RowntcMultiDemodAesSConfEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodAesSConfTable.
1.3.6.1.4.1.5835.5.2.3300.1.17.1.1ColumnntcMultiDemodAesSConfNamenot-accessiblecurrentThe name of the stream
1.3.6.1.4.1.5835.5.2.3300.1.17.1.2ColumnntcMultiDemodAesSConfRowStatusread-createcurrentThe status of this conceptual row. An existing conceptual row can be in any one of the three states, 'notReady', 'notInService', or 'active'. If the manager wi…
1.3.6.1.4.1.5835.5.2.3300.1.17.1.3ColumnntcMultiDemodAesSConfEnableread-createcurrentEnable or disable the demodulator function
1.3.6.1.4.1.5835.5.2.3300.1.17.1.4ColumnntcMultiDemodAesSConfIsiread-createcurrentThe DVB-S2 Input Stream Identifier (ISI) is present in the second byte position of the MATYPE field in the Baseband Header of a DVB-S2 Baseband Frame. It is a …
1.3.6.1.4.1.5835.5.2.3300.1.17.1.5ColumnntcMultiDemodAesSConfEncEKeyread-createcurrentThe even encrypted key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}…
1.3.6.1.4.1.5835.5.2.3300.1.17.1.6ColumnntcMultiDemodAesSConfEncOKeyread-createcurrentThe odd encrypted key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}$)
1.3.6.1.4.1.5835.5.2.3300.1.17.1.7ColumnntcMultiDemodAesSConfEKeyread-createcurrentThe even key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}$)
1.3.6.1.4.1.5835.5.2.3300.1.17.1.8ColumnntcMultiDemodAesSConfOKeyread-createcurrentThe odd key which is used to encrypt/decrypt the stream. Regular expression : (?-mix:^[A-Fa-f0-9]{16}$|^[A-Fa-f0-9]{32}$|^[A-Fa-f0-9]{64}$|^[\*]{10}$)
1.3.6.1.4.1.5835.5.2.3300.1.17.1.9ColumnntcMultiDemodAesSConfDemodIdread-createcurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.18TablentcMultiDemodAesGMonTablenot-accessiblecurrentAES Global monitoring table
1.3.6.1.4.1.5835.5.2.3300.1.18.1RowntcMultiDemodAesGMonEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodAesGMonTable.
1.3.6.1.4.1.5835.5.2.3300.1.18.1.1ColumnntcMultiDemodAesGMonDemodIdnot-accessiblecurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.18.1.2ColumnntcMultiDemodAesGMonKeyParityread-onlycurrentSpecify whether the odd or even key will be used
1.3.6.1.4.1.5835.5.2.3300.1.19TablentcMultiDemodAesSMonTablenot-accessiblecurrentAES Stream monitoring table
1.3.6.1.4.1.5835.5.2.3300.1.19.1RowntcMultiDemodAesSMonEntrynot-accessiblecurrentA conceptual row of the ntcMultiDemodAesSMonTable.
1.3.6.1.4.1.5835.5.2.3300.1.19.1.1ColumnntcMultiDemodAesSMonNamenot-accessiblecurrentThe name of the stream
1.3.6.1.4.1.5835.5.2.3300.1.19.1.2ColumnntcMultiDemodAesSMonDemodIdread-onlycurrentThe id of the demodulator
1.3.6.1.4.1.5835.5.2.3300.1.19.1.3ColumnntcMultiDemodAesSMonKeyParityread-onlycurrentSpecify whether the odd or even key will be used
1.3.6.1.4.1.5835.5.2.3300.2IdentityntcMultiDemodConformancecurrentConformance requirements.
1.3.6.1.4.1.5835.5.2.3300.2.1IdentityntcMultiDemodConfCompliancecurrentDevice compliance statements.
1.3.6.1.4.1.5835.5.2.3300.2.1.1CompliancentcMultiDemodConfCompV1StandardcurrentCompliance statement for Newtec device MIB implementations.
1.3.6.1.4.1.5835.5.2.3300.2.2IdentityntcMultiDemodConfGroupcurrentGroups used by device compliance statements.
1.3.6.1.4.1.5835.5.2.3300.2.2.1GroupntcMultiDemodConfGrpV1StandardcurrentManaged objects that constitute version 1 of a system device with standard capabilities.
1.3.6.1.4.1.5835.5.2.3300.2.2.2GroupntcMultiDemodConfGrpObsoleteobsoleteManaged objects which are deprecated or obsolete
MIB Viewer