MIB Viewer

NEWTEC-PROTECTEDTSOVERIPIN-MIB

69 objects
Newtec modular Protected TSoIP input MIB containing definitions for Protected TS over IP input functionality.
Imported Objects
NEWTEC-MAIN-MIBntcFunction
NEWTEC-TC-MIBNtcAlarmState NtcEnable NtcNetworkAddress
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.5835.5.2.9400IdentityntcProtectedTsOverIpInNewtec modular Protected TSoIP input MIB containing definitions for Protected TS over IP input functionality.
1.3.6.1.4.1.5835.5.2.9400.1IdentityntcProtTsOIpInObjectscurrentContainer holding ntcProtTsOIpInObjects definitions.
1.3.6.1.4.1.5835.5.2.9400.1.1ScalarntcProtTsOIpInEnableread-writecurrentEnable or disable TS (Transport Stream) over IP reception.
1.3.6.1.4.1.5835.5.2.9400.1.2ScalarntcProtTsOIpInProtInpSelectionread-writecurrentConfiguration of the Protected TSoIP input interface.
1.3.6.1.4.1.5835.5.2.9400.1.3TablentcProtTsOIpInConfTablenot-accessiblecurrentConfiguration table
1.3.6.1.4.1.5835.5.2.9400.1.3.1RowntcProtTsOIpInConfEntrynot-accessiblecurrentA conceptual row of the ntcProtTsOIpInConfTable.
1.3.6.1.4.1.5835.5.2.9400.1.3.1.1ColumnntcProtTsOIpInConfNamenot-accessiblecurrentName of the configuration
1.3.6.1.4.1.5835.5.2.9400.1.3.1.2ColumnntcProtTsOIpInInpSelectionread-writecurrentSelect the input interface for the TS over IP functionality.
1.3.6.1.4.1.5835.5.2.9400.1.3.1.3ColumnntcProtTsOIpInTsEncapProtocolread-writecurrentEncapsulation protocol used for the received TS over IP functionality (UDP, RTP and RTP with FEC).
1.3.6.1.4.1.5835.5.2.9400.1.3.1.4ColumnntcProtTsOIpInIpAddressTyperead-writecurrentConfiguration of the IP address type for TS over IP reception. (unicast or multicast)
1.3.6.1.4.1.5835.5.2.9400.1.3.1.5ColumnntcProtTsOIpInMulticastAddressread-writecurrentDefine the multicast IP address used to receive the TS over IP data functionality. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.9400.1.3.1.6ColumnntcProtTsOIpInMulticastSourceAread-writecurrentMulticast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.9400.1.3.1.7ColumnntcProtTsOIpInMulticastSourceBread-writecurrentMulticast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.9400.1.3.1.8ColumnntcProtTsOIpInUdpPortread-writecurrentConfigure the UDP port on which the TS over IP stream is received.
1.3.6.1.4.1.5835.5.2.9400.1.3.1.9ColumnntcProtTsOIpInTrafficProfileread-writecurrentConfigure the TS input traffic profile for the TS stream (CBR=constant or VBR=variable bitrate).
1.3.6.1.4.1.5835.5.2.9400.1.3.1.10ColumnntcProtTsOIpInInputRateTyperead-writecurrentWhen the operator selects 'User Defined', the actual input rate and the control loop type needs to be specified further. In the other case, PCR PID and control…
1.3.6.1.4.1.5835.5.2.9400.1.3.1.11ColumnntcProtTsOIpInAutoPcrDetectionread-writecurrentEnable or disable Auto PCR Detection.
1.3.6.1.4.1.5835.5.2.9400.1.3.1.12ColumnntcProtTsOIpInPcrPidread-writecurrentPCR PID.
1.3.6.1.4.1.5835.5.2.9400.1.3.1.13ColumnntcProtTsOIpInMaxBufferDelayread-writecurrentThe maximum delay introduced by the device to compensate jitter introduced by the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.9400.1.3.1.14ColumnntcProtTsOIpInInputTsBitRateread-writecurrentTS input rate in bps used with a constant bitrate input traffic profile. Current devices support a range of 10 to 250000000 bps.
1.3.6.1.4.1.5835.5.2.9400.1.4IdentityntcProtTsOIpInMoncurrentContainer holding ntcProtTsOIpInMon definitions.
1.3.6.1.4.1.5835.5.2.9400.1.4.1ScalarntcProtTsOIpInCounterResetread-writecurrentReset the TS over IP traffic and monitor counters.
1.3.6.1.4.1.5835.5.2.9400.1.4.2ScalarntcProtTsOIpInMInpSelTsBRateread-onlycurrentDisplays the measured TS over IP input TS bit rate in bps.
1.3.6.1.4.1.5835.5.2.9400.1.4.3ScalarntcProtTsOIpInSwitchCountread-onlycurrentCounts the number of times the device switched to another TS input.
1.3.6.1.4.1.5835.5.2.9400.1.4.4ScalarntcProtTsOIpInActiveInputread-onlycurrentCurrently selected input by the protected port.
1.3.6.1.4.1.5835.5.2.9400.1.4.5TablentcProtTsOIpInMonTablenot-accessiblecurrentMonitoring table
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1RowntcProtTsOIpInMonEntrynot-accessiblecurrentA conceptual row of the ntcProtTsOIpInMonTable.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.1ColumnntcProtTsOIpInMonNamenot-accessiblecurrentName of the output monitor
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.2ColumnntcProtTsOIpInMonMeasInTsBitRateread-onlycurrentDisplays the measured TS over IP input TS bit rate in bps.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.3ColumnntcProtTsOIpInMonBufferDelayread-onlycurrentThe delay introduced by the device to compensate the jitter introduced by the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.4ColumnntcProtTsOIpInMonMinBufferFillread-onlycurrentThe measured minimum buffer delay in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.5ColumnntcProtTsOIpInMonMaxBufferFillread-onlycurrentThe measured maximum buffer delay in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.6ColumnntcProtTsOIpInMonSourceInforead-onlycurrentDisplays the IP address (and UDP port) of the source that is generating the TS over IP traffic.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.7ColumnntcProtTsOIpInMonRtpFecSchemeread-onlycurrentDisplays the type of Rtp FEC Scheme currently used (if any).
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.8ColumnntcProtTsOIpInMonTsInCountread-onlycurrentDisplays the Number of received TS packets in UDP mode.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.9ColumnntcProtTsOIpInMonRtpInCountread-onlycurrentDisplays the number of received RTP packets. (only applicable when RTP is used)
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.10ColumnntcProtTsOIpInMonRtpColFecInCntread-onlycurrentDisplays the number of received (input) RTP column FEC packets.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.11ColumnntcProtTsOIpInMonRtpRowFecInCntread-onlycurrentDisplays the number of received RTP row FEC packets. (Only applicable when RTP with FEC is used.)
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.12ColumnntcProtTsOIpInMonTsOutCountread-onlycurrentDisplays the number of valid TS packets leaving the TS over IP input processing.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.13ColumnntcProtTsOIpInMonTsDropCountread-onlycurrentNumber of dropped TS packets. (When RTP is used the number of dropped TS packets in the RTP frame is counted.)
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.14ColumnntcProtTsOIpInMonTsOverflowCountread-onlycurrentDisplays the number of TS packets that are dropped because of an overflow situation.
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.15ColumnntcProtTsOIpInMonRtpDropCountread-onlycurrentDisplays the number of dropped RTP packets. (This is only applicable when RTP is used.)
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.16ColumnntcProtTsOIpInMonRtpFecDropCountread-onlycurrentDisplays the number of dropped uncorrectable packets. (This is only applicable when RTP-FEC is used.)
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.17ColumnntcProtTsOIpInMonRtpRepairCountread-onlycurrentDisplays the number of repaired RTP packets by using the received FEC information. (This is only applicable for RTP with FEC)
1.3.6.1.4.1.5835.5.2.9400.1.4.5.1.18ColumnntcProtTsOIpInActivePcrPidread-onlycurrentActive PCR PID.
1.3.6.1.4.1.5835.5.2.9400.1.5IdentityntcProtTsOIpInAlarmscurrentContainer holding ntcProtTsOIpInAlarms definitions.
1.3.6.1.4.1.5835.5.2.9400.1.5.1TablentcProtTsOIpInAlarmStatusTablenot-accessiblecurrentAlarm status table
1.3.6.1.4.1.5835.5.2.9400.1.5.1.1RowntcProtTsOIpInAlarmStatusEntrynot-accessiblecurrentA conceptual row of the ntcProtTsOIpInAlarmStatusTable.
1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.1ColumnntcProtTsOIpInAlarmStatusNamenot-accessiblecurrentName of the alarm monitor
1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.2ColumnntcProtTsOIpInNoInputDataread-onlycurrentThis alarm is raised when no input data is received for at least one of the the redundant TS over IP inputs. This variable indicates the current status of the …
1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.3ColumnntcProtTsOIpInBufferUnderflowread-onlycurrentThis alarm is raised when the input data buffer is below the minimum value. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.4ColumnntcProtTsOIpInBufferOverflowread-onlycurrentThis alarm is raised when the input data buffer of TS over IP is full. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.5.1.1.5ColumnntcProtTsOIpInRtpNoSyncread-onlycurrentThis alarm is raised when no valid RTP input data is received. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.6IdentityntcProtTsOIpInAlarmcurrentContainer holding ntcProtTsOIpInAlarm definitions.
1.3.6.1.4.1.5835.5.2.9400.1.6.1ScalarntcProtTsOIpInAlRedFailureread-onlycurrentThis alarm is raised when a failure in redundancy is detected on a protected TSoIP input interface. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.6.2ScalarntcProtTsOIpInAlRedDegradedread-onlycurrentThis alarm is raised when one of the interface of a redundant TSoIP input interface is down. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.6.3ScalarntcProtTsOIpInAlNoInputDataread-onlycurrentThis alarm is raised when no input data is received for at least one of the the redundant TS over IP inputs. This variable indicates the current status of the …
1.3.6.1.4.1.5835.5.2.9400.1.6.4ScalarntcProtTsOIpInAlBufferUnderflowread-onlycurrentThis alarm is raised when the input data buffer is below the minimum value. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.6.5ScalarntcProtTsOIpInAlBufferOverflowread-onlycurrentThis alarm is raised when the input data buffer of TS over IP is full. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.6.6ScalarntcProtTsOIpInAlRtpNoSyncread-onlycurrentThis alarm is raised when no valid RTP input data is received. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.9400.1.7IdentityntcProtTsOIpInNpRangeThrcurrentContainer holding ntcProtTsOIpInNpRangeThr definitions.
1.3.6.1.4.1.5835.5.2.9400.1.7.1ScalarntcProtTsOIpInNpRangeThrEnableread-writecurrentEnable or disable the Null Packet Rate Threshold.
1.3.6.1.4.1.5835.5.2.9400.1.7.2ScalarntcProtTsOIpInNpRangeThrMaxRateread-writecurrentMaximum Null Packets Bit Rate.
1.3.6.1.4.1.5835.5.2.9400.1.7.3ScalarntcProtTsOIpInNpRangeTimeWindowread-writecurrentSpecify the time window in seconds.
1.3.6.1.4.1.5835.5.2.9400.2IdentityntcProtTsOIpInConformancecurrentConformance requirements.
1.3.6.1.4.1.5835.5.2.9400.2.1IdentityntcProtTsOIpInConfCompliancecurrentDevice compliance statements.
1.3.6.1.4.1.5835.5.2.9400.2.1.1CompliancentcProtTsOIpInConfCompV1StandardcurrentCompliance statement for Newtec device MIB implementations.
1.3.6.1.4.1.5835.5.2.9400.2.2IdentityntcProtTsOIpInConfGroupcurrentGroups used by device compliance statements.
1.3.6.1.4.1.5835.5.2.9400.2.2.1GroupntcProtTsOIpInConfGrpV1StandardcurrentManaged objects that constitute version 1 of a system device with standard capabilities.
MIB Viewer