NEWTEC-SIMPEDECAPS-MIB
17 objects
Newtec modular MIB containing definitions for MPE decaps functionality.
Imported Objects
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.8500 | IdentityntcSiMpeDecaps | Newtec modular MIB containing definitions for MPE decaps functionality. | ||
| 1.3.6.1.4.1.5835.5.2.8500.1 | IdentityntcSiMpeDeObjects | current | Container holding ntcSiMpeDeObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.8500.1.1 | IdentityntcSiMpeDeConfiguration | current | Container holding ntcSiMpeDeConfiguration definitions. | |
| 1.3.6.1.4.1.5835.5.2.8500.1.1.1 | ScalarntcSiMpeDeEnable | read-write | current | Enable or disable the MPE decapsulation. |
| 1.3.6.1.4.1.5835.5.2.8500.1.1.2 | ScalarntcSiMpeDeDataPid | read-write | current | The MPEG2 TS Packet Identifier (PID) used for the MPE encapsulated data. |
| 1.3.6.1.4.1.5835.5.2.8500.1.1.3 | ScalarntcSiMpeDeMacAddress | read-write | current | Mac address of the destination channel. Regular expression : (?-mix:^([\da-fA-F]{2}:){5}[\da-fA-F]{2}$) |
| 1.3.6.1.4.1.5835.5.2.8500.1.2 | IdentityntcSiMpeDeMonitoring | current | Container holding ntcSiMpeDeMonitoring definitions. | |
| 1.3.6.1.4.1.5835.5.2.8500.1.2.1 | ScalarntcSiMpeDeCounterReset | read-write | current | Reset the MPE decapsulation monitor counters. |
| 1.3.6.1.4.1.5835.5.2.8500.1.2.2 | ScalarntcSiMpeDeForwardBitRate | read-only | current | MPE forwarding bit rate (bits/s). |
| 1.3.6.1.4.1.5835.5.2.8500.1.2.3 | ScalarntcSiMpeDeDroppedPackets | read-only | current | Number of dropped packets. |
| 1.3.6.1.4.1.5835.5.2.8500.1.3 | IdentityntcSiMpeDeAlarms | current | Container holding ntcSiMpeDeAlarms definitions. | |
| 1.3.6.1.4.1.5835.5.2.8500.1.3.1 | ScalarntcSiMpeDeAlDataOverflow | read-only | current | This alarm is raised when the bitrate send out is higher than the max possible for the given interface. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.8500.2 | IdentityntcSiMpeDeConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.8500.2.1 | IdentityntcSiMpeDeConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.8500.2.1.1 | CompliancentcSiMpeDeConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.8500.2.2 | IdentityntcSiMpeDeConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.8500.2.2.1 | GroupntcSiMpeDeConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |