MIB Viewer

NEWTEC-TSOVERIPIN-MIB

49 objects
Newtec modular TSoIP input MIB containing definitions for TS over IP input functionality.
Imported Objects
NEWTEC-MAIN-MIBntcFunction
NEWTEC-TC-MIBNtcAlarmState NtcEnable NtcNetworkAddress
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.5835.5.2.600IdentityntcTsOverIpInNewtec modular TSoIP input MIB containing definitions for TS over IP input functionality.
1.3.6.1.4.1.5835.5.2.600.1IdentityntcTsOIpInObjectscurrentContainer holding ntcTsOIpInObjects definitions.
1.3.6.1.4.1.5835.5.2.600.1.1ScalarntcTsOIpInEnableread-writecurrentEnable or disable TS (Transport Stream) over IP reception.
1.3.6.1.4.1.5835.5.2.600.1.2ScalarntcTsOIpInInputSelectionread-writecurrentSelect the input interface for the TS over IP functionality.
1.3.6.1.4.1.5835.5.2.600.1.3ScalarntcTsOIpInTsEncapProtocolread-writecurrentEncapsulation protocol used for the received TS over IP functionality (UDP, RTP and RTP with FEC).
1.3.6.1.4.1.5835.5.2.600.1.4ScalarntcTsOIpInIpAddressTyperead-writecurrentConfiguration of the IP address type for TS over IP reception. (unicast or multicast)
1.3.6.1.4.1.5835.5.2.600.1.5ScalarntcTsOIpInMulticastAddressread-writecurrentDefine the multicast IP address used to receive the TS over IP data functionality. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.600.1.6ScalarntcTsOIpInUdpPortread-writecurrentConfigure the UDP port on which the TS over IP stream is received.
1.3.6.1.4.1.5835.5.2.600.1.7ScalarntcTsOIpInTrafficProfileread-writecurrentConfigure the TS input traffic profile for the TS stream (CBR=constant or VBR=variable bitrate).
1.3.6.1.4.1.5835.5.2.600.1.8ScalarntcTsOIpInMaxTrafficJitterread-writedeprecatedThe maximum traffic jitter that can be introduced by the IP network, for the TS Over IP input traffic. Current devices support a range of 0 to 150 ms.
1.3.6.1.4.1.5835.5.2.600.1.9ScalarntcTsOIpInMaxBufferDelayread-writecurrentThe maximum delay introduced by the device to compensate jitter introduced by the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.600.1.10ScalarntcTsOIpInInputTsBitRateread-writecurrentTS input rate in bps used with a constant bitrate input traffic profile. Current devices support a range of 10 to 250000000 bps.
1.3.6.1.4.1.5835.5.2.600.1.11IdentityntcTsOIpInMonitorcurrentContainer holding ntcTsOIpInMonitor definitions.
1.3.6.1.4.1.5835.5.2.600.1.11.1ScalarntcTsOIpInMonResetCountersread-writecurrentReset the TS over IP traffic and monitor counters.
1.3.6.1.4.1.5835.5.2.600.1.11.2ScalarntcTsOIpInMonInputTsBitRateread-onlycurrentDisplays the measured TS over IP input TS bit rate in bps.
1.3.6.1.4.1.5835.5.2.600.1.11.3ScalarntcTsOIpInMonBufferDelayread-onlycurrentThe delay introduced by the device to compensate the jitter introduced by the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.600.1.11.4ScalarntcTsOIpInMonMinBufferFillingread-onlycurrentThe measured minimum buffer delay in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.600.1.11.5ScalarntcTsOIpInMonMaxBufferFillingread-onlycurrentThe measured maximum buffer delay in the buffer which compensate the jitter of the IP network. This is only relevant for CBR traffic.
1.3.6.1.4.1.5835.5.2.600.1.11.6ScalarntcTsOIpInMonSourceInforead-onlycurrentDisplays the IP address (and UDP port) of the source that is generating the TS over IP traffic.
1.3.6.1.4.1.5835.5.2.600.1.11.7ScalarntcTsOIpInMonRtpFecSchemeread-onlycurrentDisplays the type of Rtp FEC Scheme currently used (if any).
1.3.6.1.4.1.5835.5.2.600.1.11.8ScalarntcTsOIpInMonTsInCountread-onlycurrentDisplays the Number of received TS packets in UDP mode.
1.3.6.1.4.1.5835.5.2.600.1.11.9ScalarntcTsOIpInMonRtpInCountread-onlycurrentDisplays the number of received RTP packets. (only applicable when RTP is used)
1.3.6.1.4.1.5835.5.2.600.1.11.10ScalarntcTsOIpInMonRtpColumnFecInCountread-onlycurrentDisplays the number of received (input) RTP column FEC packets.
1.3.6.1.4.1.5835.5.2.600.1.11.11ScalarntcTsOIpInMonRtpRowFecInCountread-onlycurrentDisplays the number of received RTP row FEC packets. (Only applicable when RTP with FEC is used.)
1.3.6.1.4.1.5835.5.2.600.1.11.12ScalarntcTsOIpInMonTsOutCountread-onlycurrentDisplays the number of valid TS packets leaving the TS over IP input processing.
1.3.6.1.4.1.5835.5.2.600.1.11.13ScalarntcTsOIpInMonTsDropCountread-onlycurrentNumber of dropped TS packets. (When RTP is used the number of dropped TS packets in the RTP frame is counted.)
1.3.6.1.4.1.5835.5.2.600.1.11.14ScalarntcTsOIpInMonTsOverflowCountread-onlycurrentDisplays the number of TS packets that are dropped because of an overflow situation.
1.3.6.1.4.1.5835.5.2.600.1.11.15ScalarntcTsOIpInMonRtpDropCountread-onlycurrentDisplays the number of dropped RTP packets. (This is only applicable when RTP is used.)
1.3.6.1.4.1.5835.5.2.600.1.11.16ScalarntcTsOIpInMonRtpRepairCountread-onlycurrentDisplays the number of repaired RTP packets by using the received FEC information. (This is only applicable for RTP with FEC)
1.3.6.1.4.1.5835.5.2.600.1.11.17ScalarntcTsOIpInMonRtpFecDropCountread-onlycurrentDisplays the number of dropped uncorrectable packets. (This is only applicable when RTP-FEC is used.)
1.3.6.1.4.1.5835.5.2.600.1.11.18ScalarntcTsOIpInMonActivePCRPIDread-onlycurrentActive PCR PID.
1.3.6.1.4.1.5835.5.2.600.1.12IdentityntcTsOIpInAlarmcurrentContainer holding ntcTsOIpInAlarm definitions.
1.3.6.1.4.1.5835.5.2.600.1.12.1ScalarntcTsOIpInAlmGeneralTsOverIpInread-onlycurrentThis alarm is raised when there is a general TS over IP Input alarm. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.600.1.12.2ScalarntcTsOIpInAlmNoInputDataread-onlycurrentThis alarm is raised when no input data is received for the TS over IP functionality. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.600.1.12.3ScalarntcTsOIpInAlmBufferOverflowread-onlycurrentThis alarm is raised when the input data buffer of TS over IP is full. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.600.1.12.4ScalarntcTsOIpInAlmBufferUnflowread-onlycurrentThis alarm is raised when the input data buffer is below the minimum value. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.600.1.12.5ScalarntcTsOIpInAlmRtpNoSyncread-onlycurrentThis alarm is raised when no valid RTP input data is received. This variable indicates the current status of the alarm.
1.3.6.1.4.1.5835.5.2.600.1.12.6ScalarntcTsOIpInAlmInvalidTsBitRateread-onlycurrentThis alarm is raised when the measured input Ts Bitrate is higher/lower then the configured value. (only relevant for a CBR Traffic profile) This variable indi…
1.3.6.1.4.1.5835.5.2.600.1.13ScalarntcTsOIpInMulticastSourceAread-writecurrentMulticast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.600.1.14ScalarntcTsOIpInMulticastSourceBread-writecurrentMulticast source Address. Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$)
1.3.6.1.4.1.5835.5.2.600.1.15ScalarntcTsOIpInInputRateTyperead-writecurrentWhen the operator selects 'User Defined', the actual input rate and the control loop type needs to be specified further. In the other case, PCR PID and control…
1.3.6.1.4.1.5835.5.2.600.1.16ScalarntcTsOIpInAutoPcrDetectionread-writecurrentEnable or disable Auto PCR Detection.
1.3.6.1.4.1.5835.5.2.600.1.17ScalarntcTsOIpInPcrPidread-writecurrentPCR PID.
1.3.6.1.4.1.5835.5.2.600.2IdentityntcTsOIpInConformancecurrentConformance requirements.
1.3.6.1.4.1.5835.5.2.600.2.1IdentityntcTsOIpInConfCompliancecurrentDevice compliance statements.
1.3.6.1.4.1.5835.5.2.600.2.1.1CompliancentcTsOIpInConfCompV1StandardcurrentCompliance statement for Newtec device MIB implementations.
1.3.6.1.4.1.5835.5.2.600.2.2IdentityntcTsOIpInConfGroupcurrentGroups used by device compliance statements.
1.3.6.1.4.1.5835.5.2.600.2.2.1GroupntcTsOIpInConfGrpV1StandardcurrentManaged objects that constitute version 1 of a system device with standard capabilities.
1.3.6.1.4.1.5835.5.2.600.2.2.2GroupntcTsOIpInConfGrpObsoleteobsoleteManaged objects which are deprecated or obsolete
MIB Viewer