NEWTEC-TSOVERIPOUT-MIB
25 objects
Newtec modular TSoverIP output MIB containing definitions for singlestream TS over IP output functionality.
Imported Objects
| NEWTEC-MAIN-MIB | ntcFunction |
| NEWTEC-TC-MIB | NtcAlarmState NtcEnable NtcNetworkAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5835.5.2.8400 | IdentityntcTsOverIpOut | Newtec modular TSoverIP output MIB containing definitions for singlestream TS over IP output functionality. | ||
| 1.3.6.1.4.1.5835.5.2.8400.1 | IdentityntcTsOIpOutObjects | current | Container holding ntcTsOIpOutObjects definitions. | |
| 1.3.6.1.4.1.5835.5.2.8400.1.1 | IdentityntcTsOIpOutConfiguration | current | Container holding ntcTsOIpOutConfiguration definitions. | |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.1 | ScalarntcTsOIpOutEnable | read-write | current | Enable or disable endpoint Ts over Ip output. |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.2 | ScalarntcTsOIpOutTsEncapProtocol | read-write | current | Encapsulation protocol used for the output TS over IP functionality (UDP or RTP). |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.3 | ScalarntcTsOIpOutDestUdpPort | read-write | current | Configuration of the UDP port on which the TS over IP is sent |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.4 | ScalarntcTsOIpOutDestIpAddress | read-write | current | The destination IP Address Regular expression : (?-mix:^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$) |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.5 | ScalarntcTsOIpOutTtl | read-write | current | Multicast TTL to be set in the transmitted IP multicast packets |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.6 | ScalarntcTsOIpOutTsPacketsInFrame | read-write | current | Number of TS packets in an UDP frame |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.7 | ScalarntcTsOIpOutRtpFecColumns | read-write | current | Select the RTP FEC Columns (L) to use. This value will also put a limitation on the value of RTP FEC Rows (D), L*D < 100 . |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.8 | ScalarntcTsOIpOutRtpFecRows | read-write | current | Select the RTP FEC Rows (D) to use. This value is limitated by the value of RTP FEC Columns (L), L*D <= 100 . |
| 1.3.6.1.4.1.5835.5.2.8400.1.1.9 | ScalarntcTsOIpOutFlushScheduleTime | read-write | current | Timeframe in which packet buffers are being flushed. |
| 1.3.6.1.4.1.5835.5.2.8400.1.2 | IdentityntcTsOIpOutMonitoring | current | Container holding ntcTsOIpOutMonitoring definitions. | |
| 1.3.6.1.4.1.5835.5.2.8400.1.2.1 | ScalarntcTsOIpOutCounterReset | read-write | current | Reset the TS over IP out traffic and monitor counters. |
| 1.3.6.1.4.1.5835.5.2.8400.1.2.2 | ScalarntcTsOIpOutBitrate | read-only | current | TS over IP output bit rate in bps. |
| 1.3.6.1.4.1.5835.5.2.8400.1.2.3 | ScalarntcTsOIpOutDropCount | read-only | current | Number of dropped TS packets. |
| 1.3.6.1.4.1.5835.5.2.8400.1.2.4 | ScalarntcTsOIpOutOverflowCount | read-only | current | Displays the number of TS packets that are dropped because of an overflow situation. |
| 1.3.6.1.4.1.5835.5.2.8400.1.3 | IdentityntcTsOIpOutAlarms | current | Container holding ntcTsOIpOutAlarms definitions. | |
| 1.3.6.1.4.1.5835.5.2.8400.1.3.1 | ScalarntcTsOIpOutAlNoOutput | read-only | current | This alarm is raised when there is no output. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.8400.1.3.2 | ScalarntcTsOIpOutAlOutputOverflow | read-only | current | This alarm is raised when the bitrate send out is higher than the max possible for the given interface. This variable indicates the current status of the alarm. |
| 1.3.6.1.4.1.5835.5.2.8400.2 | IdentityntcTsOIpOutConformance | current | Conformance requirements. | |
| 1.3.6.1.4.1.5835.5.2.8400.2.1 | IdentityntcTsOIpOutConfCompliance | current | Device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.8400.2.1.1 | CompliancentcTsOIpOutConfCompV1Standard | current | Compliance statement for Newtec device MIB implementations. | |
| 1.3.6.1.4.1.5835.5.2.8400.2.2 | IdentityntcTsOIpOutConfGroup | current | Groups used by device compliance statements. | |
| 1.3.6.1.4.1.5835.5.2.8400.2.2.1 | GroupntcTsOIpOutConfGrpV1Standard | current | Managed objects that constitute version 1 of a system device with standard capabilities. |