NGPON-MIB
1203 objects
No module-level DESCRIPTION found.
Imported Objects
| ADMIN-MASTER-MIB | dataCom |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13464.1.14 | Nodengpon | |||
| 1.3.6.1.4.1.13464.1.14.1 | NodegponConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1 | NodeconfigDevice | |||
| 1.3.6.1.4.1.13464.1.14.1.1.1 | NodedeployControl | |||
| 1.3.6.1.4.1.13464.1.14.1.1.1.1 | ScalardeployPermission | read-write | current | Set deployPermission = 0 to request permission. Set deployPermission = 1 to release permission. When read, the value is always 0. |
| 1.3.6.1.4.1.13464.1.14.1.1.1.2 | ScalardeployAction | read-write | current | Set deployAction = 0 to active the deploy. Set deployAction = 1 to rebuild the deploy. Set deployAction = 2 to clear the deploy. When read, the value is always… |
| 1.3.6.1.4.1.13464.1.14.1.1.2 | NodedeployInactive | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.1 | NodeinactiveTrafficConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1 | TableinactiveVlanTable | not-accessible | current | inactive vlan table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1 | RowinactiveVlanEntry | not-accessible | current | entry of inactive vlan table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.1 | ColumninactiveVlanIndex | read-only | current | The index of inactive vlan table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.2 | ColumninactiveVlanSubIndex | read-only | current | The 2nd index of inactive vlan table, should be inputted with <1-32>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.3 | ColumninactiveVlanAction | read-write | current | inactiveVlanAction: 0 NULL 1 translate 2 add 3 add default |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.4 | ColumninactiveVlanOldVid | read-write | current | old vid, or inner vid, should in <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.5 | ColumninactiveVlanOldPriority | read-write | current | old priority, or inner priority, should in <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.6 | ColumninactiveVlanNewVid | read-write | current | new vid, or outer vid, or default vid, should in <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.7 | ColumninactiveVlanNewPriority | read-write | current | new priority, or outer priority, or default priority, should in <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.1.1.8 | ColumninactiveVlanRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2 | TableinactiveUsTrafficTable | not-accessible | current | inactive us traffic table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1 | RowinactiveUsTrafficEntry | not-accessible | current | entry of inactive us traffic table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.1 | ColumninactiveUsTrafficIndex | read-only | current | The index of inactive us traffic table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.2 | ColumninactiveUsTrafficName | read-write | current | us traffic name, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.3 | ColumninactiveUsTrafficPq | read-write | current | The gemport priority queue, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.4 | ColumninactiveUsTrafficCir | read-write | current | The gemport committed infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.5 | ColumninactiveUsTrafficPir | read-write | current | The gemport peek infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.6 | ColumninactiveUsTrafficCbs | read-write | current | The gemport committed burst size, should be inputted with <2000-10240000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.7 | ColumninactiveUsTrafficPbs | read-write | current | The gemport peek burst size, should be inputted with <2000-10240000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.2.1.8 | ColumninactiveUsTrafficRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.3 | TableinactiveDsTrafficTable | not-accessible | current | inactive ds traffic table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1 | RowinactiveDsTrafficEntry | not-accessible | current | entry of inactive ds traffic table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.1 | ColumninactiveDsTrafficIndex | read-only | current | The index of inactive ds traffic table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.2 | ColumninactiveDsTrafficName | read-write | current | ds traffic name, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.3 | ColumninactiveDsTrafficRate | read-write | current | The gemport ds bandwidth rate, should be inputted with <0-1677215>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.4 | ColumninactiveDsTrafficBurst | read-write | current | The gemport ds burst size, should be inputted with <0-1677215>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.3.1.5 | ColumninactiveDsTrafficRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.4 | TableinactiveVlanPrimaryTable | not-accessible | current | inactive vlan primary table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1 | RowinactiveVlanPrimaryEntry | not-accessible | current | entry of inactive vlan primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1.1 | ColumninactiveVlanPriIndex | read-only | current | The index of inactive vlan table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1.2 | ColumninactiveVlanPriName | read-write | current | name of inactive vlan entry. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.1.4.1.3 | ColumninactiveVlanPriRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2 | TableinactiveDbaTable | not-accessible | current | inactive domain dba table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1 | RowinactiveDbaEntry | not-accessible | current | entry of inactive dba table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.1 | ColumninactiveDbaIndex | read-only | current | The index of inactive dba table, should be inputted with <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.2 | ColumninactiveDbaName | read-write | current | inactive dba name, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.3 | ColumninactiveDbaType | read-write | current | inactiveDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.4 | ColumninactiveDbaFixBandwidth | read-write | current | Must to be divisible by 64kbps, must not less than 128 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.5 | ColumninactiveDbaAssuredBandwidth | read-write | current | Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.6 | ColumninactiveDbaMaxBandwidth | read-write | current | Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.7 | ColumninactiveDbaRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.2.1.8 | ColumninactiveDbaMethod | read-write | current | dba method. 0(default): not SR 1: SR |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3 | NodeinactiveLineCommonConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1 | TableinactiveLinePrimaryTable | not-accessible | current | inactive domain line primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1 | RowinactiveLinePrimaryEntry | not-accessible | current | entry of inactive line primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.1 | ColumninactiveLineIndex | read-only | current | The index of line primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.2 | ColumninactiveLineDeviceType | read-write | current | inactiveLineDeviceType: x30-420 4ETH+2POTS SFU t10-100 1ETH SFU t10-420 4ETH+2POTS SFU t10-214 2ETH(1ETH+1iTV)+1POTS SFU t10-423 4ETH+2POTS+WIFI+USB HGU t10-42… |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.3 | ColumninactiveLineName | read-write | current | line name, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.4 | ColumninactiveLineTrafficMode | read-write | current | inactiveLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.5 | ColumninactiveLineMappingMode | read-write | current | inactiveLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.6 | ColumninactiveLineRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.1.1.7 | ColumninactiveLineFecSwitch | read-write | current | inactiveLineFecSwitch: 0 false (default) 1 true |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.2 | TableinactiveLineTcontTable | not-accessible | current | inactive domain line tcont table, now only for tcont bind dba. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1 | RowinactiveLineTcontEntry | not-accessible | current | entry of inactive line tcont table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.1 | ColumninactiveLineIndexI | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.2 | ColumninactiveLineTcontIndex | read-only | current | The index of tcont, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.3 | ColumninactiveLineTcontDbaIndex | read-write | current | The index of tcont bind dba, should be inputted with <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.2.1.4 | ColumninactiveLineTcontRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3 | TableinactiveLineGemportTable | not-accessible | current | inactive domain line gemport table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1 | RowinactiveLineGemportEntry | not-accessible | current | entry of inactive line gemport table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.1 | ColumninactiveLineIndexII | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.2 | ColumninactiveLineGemportIndex | read-only | current | The index of gemport, the 2nd index of this table. Should in <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.3 | ColumninactiveLineGemportTcontId | read-write | current | The gemport bind tcont index, should be inputted with <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.4 | ColumninactiveLineGemportVlanProfileId | read-write | current | The gemport vlan profile id, should be inputted with <0-4095>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.5 | ColumninactiveLineGemportUsProfileId | read-write | current | The gemport us traffic profile id, should be inputted with <0-4095>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.6 | ColumninactiveLineGemportDsProfileId | read-write | current | The gemport ds traffic profile id, should be inputted with <0-4095>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.3.1.7 | ColumninactiveLineGemportRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4 | TableinactiveLineFlowmappingTable | not-accessible | current | inactive domain line flow mapping table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1 | RowinactiveLineFlowmappingEntry | not-accessible | current | entry of inactive line flow mapping table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.1 | ColumninactiveLineIndexIII | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.2 | ColumninactiveLineFlowmappingIndex | read-only | current | The index of flowmapping, the 2nd index of this table. Should in <1-48>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.3 | ColumninactiveLineFlowmappingVid | read-write | current | The flow mapping vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.4 | ColumninactiveLineFlowmappingPriority | read-write | current | The flow mapping priority, should be inputted with <0-8>. default value 8 means don't care 802.1p priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.5 | ColumninactiveLineFlowmappingEthport | read-write | current | The flow mapping ethernet port id, should be inputted with <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.6 | ColumninactiveLineFlowmappingGemport | read-write | current | The flow mapping gem port id, should be inputted with <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.7 | ColumninactiveLineFlowmappingType | read-write | current | inactiveLineFlowmappingType: 0 flowmapping not base port. 1 flowmapping base eth port. 2 flowmapping base veip port. 3. flowmapping base iphost port. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.4.1.8 | ColumninactiveLineFlowmappingRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5 | TableinactiveLineAttrMgmtTable | not-accessible | current | inactive domain line attribute management table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1 | RowinactiveLineAttrMgmtEntry | not-accessible | current | entry of inactive line attribute management table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.1 | ColumninactiveLineIndexIV | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.2 | ColumninactiveLineAttrMgmtIndex | read-only | current | The index of attribute management, the 2nd index of this table. Should in <1-64>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.3 | ColumninactiveLineAttrMgmtNportType | read-write | current | inactiveLineAttrMgmtNportType: 1 eth port in sfu 2 veip port in hgu 3 iphost virtual port, for voip, tdm, etc. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.4 | ColumninactiveLineAttrMgmtNport | read-write | current | The port of attribute management, if eport, should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.5 | ColumninactiveLineAttrMgmtEtypeFilter | read-write | current | inactiveLineAttrMgmtEtypeFilter: 0 no filter 1 filter ipoe frame 2 filter pppoe frame 3 filter arp frame |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.6 | ColumninactiveLineAttrMgmtVlanMode | read-write | current | inactiveLineAttrMgmtVlanMode: 0 transparent 1 tag 2 translation 3 trunk 4 QinQ |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.7 | ColumninactiveLineAttrMgmtCvlanVid | read-write | current | cvlan vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.8 | ColumninactiveLineAttrMgmtCvlanPri | read-write | current | The cvlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.9 | ColumninactiveLineAttrMgmtSvlanVid | read-write | current | svlan vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.10 | ColumninactiveLineAttrMgmtSvlanPri | read-write | current | svlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.5.1.11 | ColumninactiveLineAttrMgmtRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.6 | TableinactiveLineCportTable | not-accessible | current | inactive domain line catv port management table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1 | RowinactiveLineCportEntry | not-accessible | current | entry of inactive line catv port management table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.1 | ColumninactiveLineIndexX | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.2 | ColumninactiveLineCportIndex | read-only | current | The index of catv port management, the 2nd index of this table. Should in <1-4>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.3 | ColumninactiveLineCportSwitch | read-write | current | inactiveLineCportSwitch: 0 disable 1 enable(default) |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.4 | ColumninactiveLineCportAgcMode | read-write | current | inactiveLineCportAgcMode: 0 No AGC 1 Broadband RF AGC 2 Optical AGC |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.6.1.5 | ColumninactiveLineCportAgcRange | read-write | current | catv port agc range, default: 0. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.7 | TableinactiveLineAlarmRefTable | not-accessible | current | inactive line alarm Reference table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1 | RowinactiveLineAlarmRefEntry | not-accessible | current | entry of inactive line alarm Reference table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.1 | ColumninactiveLineAlarmRefLIndex | read-only | current | The line index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.2 | ColumninactiveLineAlarmRefAIndex | read-create | current | The index of alarm table to reference, Should in <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.3 | ColumninactiveLineAlarmRefAName | read-create | current | The entry name of alarm table to reference, Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.3.7.1.4 | ColumninactiveLineAlarmRefRowStatus | read-create | current | The row status of inactive line alarm Reference table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4 | NodeinactiveLineSFUConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.1 | TableinactiveLineSFUTable | not-accessible | current | inactive domain line SFU primary table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1 | RowinactiveLineSFUEntry | not-accessible | current | entry of inactive line sfu primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1.1 | ColumninactiveLineIndexV | read-only | current | The 1st index of this table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1.2 | ColumninactiveLineSfuLocalSwitch | read-write | current | inactiveLineSfuLocalSwitch: 0 disable(default) 1 enable. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.1.1.3 | ColumninactiveLineSfuLoopDetectSwitch | read-write | current | inactiveLineSfuLoopDetectSwitch: 0 disable(default) 1 enable. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2 | TableinactiveLineSFUEthportTable | not-accessible | current | inactive domain line SFU ethernet port table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1 | RowinactiveLineSFUEthportEntry | not-accessible | current | entry of inactive line SFU ethernet port table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.1 | ColumninactiveLineIndexVI | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.2 | ColumninactiveLineSfuEthportIndex | read-only | current | The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.3 | ColumninactiveLineSfuEthportSwitch | read-write | current | inactiveLineSfuEthportSwitch: 0 no shutdown(default) 1 shutdown |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.4 | ColumninactiveLineSfuEthportFlowCtrlSwitch | read-write | current | inactiveLineSfuEthportFlowCtrlSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.5 | ColumninactiveLineSfuEthportLoopbackSwitch | read-write | current | inactiveLineSfuEthportLoopbackSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.6 | ColumninactiveLineSfuEthportFastLeaveSwitch | read-write | current | inactiveLineSfuEthportFastLeaveSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.7 | ColumninactiveLineSfuEthportMaxGroups | read-write | current | The SFU ethernet port max igmp groups, should be inputted with <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.8 | ColumninactiveLineSfuEthportMaxMacCount | read-write | current | The SFU ethernet port max mac address count, should be inputted with <1-255>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.9 | ColumninactiveLineSfuEthportMcastMode | read-write | current | inactiveLineSfuEthportMcastMode(some ont not support): 0 control 1 igmp snooping 2 unconcern(default) |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.10 | ColumninactiveLineSfuEthportDsIgmpControlType | read-write | current | inactiveLineSfuEthportDsIgmpControlType: 0 transparent(default, only for read) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.11 | ColumninactiveLineSfuEthportDsIgmpVid | read-write | current | The SFU ethernet port downstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.12 | ColumninactiveLineSfuEthportDsIgmpPri | read-write | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.13 | ColumninactiveLineSfuEthportDsIgmpRowStatus | read-write | current | RowStatus for ethport ds igmp tag control. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.14 | ColumninactiveLineSfuEthportUsIgmpControlType | read-write | current | inactiveLineSfuEthportUsIgmpControlType: 0 transparent(default, only for read) 1 add tag 2 replace tag 3 replace only vid 4 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.15 | ColumninactiveLineSfuEthportUsIgmpVid | read-write | current | The SFU ethernet port upstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.16 | ColumninactiveLineSfuEthportUsIgmpPri | read-write | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.17 | ColumninactiveLineSfuEthportUsIgmpRowStatus | read-write | current | RowStatus for ethport us igmp tag control. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.18 | ColumninactiveLineSfuEthportBwCir | read-write | current | The SFU ethernet port bandwidth egress cir, should be inputted with <64-1024000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.19 | ColumninactiveLineSfuEthportBwCbs | read-write | current | The SFU ethernet port bandwidth egress cbs, should be inputted with <2-32000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.20 | ColumninactiveLineSfuEthportBwPir | read-write | current | The SFU ethernet port bandwidth egress pir, should be inputted with <64-1024000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.21 | ColumninactiveLineSfuEthportBwPbs | read-write | current | The SFU ethernet port bandwidth egress pbs, should be inputted with <2-32000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.4.2.1.22 | ColumninactiveLineSfuEthportBwRowStatus | read-write | current | RowStatus for ethernet port bandwidth egress. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5 | NodeinactiveLineHGUConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1 | TableinactiveLineHGUTable | not-accessible | current | inactive domain line HGU table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1 | RowinactiveLineHGUEntry | not-accessible | current | entry of inactive line HGU table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.1 | ColumninactiveLineIndexVIII | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.2 | ColumninactiveLineHguSwitch | read-write | current | inactiveLineHguSwitch: 0 no shutdown(default) 1 shutdown |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.3 | ColumninactiveLineHguFastLeaveSwitch | read-write | current | inactiveLineHguFlowCtrlSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.4 | ColumninactiveLineHguMaxGroups | read-write | current | The HGU max igmp groups, should be inputted with <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.5 | ColumninactiveLineHguMaxMacCount | read-write | current | The HGU max mac address count, should be inputted with <1-255>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.6 | ColumninactiveLineHguMcastMode | read-write | current | inactiveLineHguMcastMode(some ont not support): 0 control 1 igmp snooping 2 unconcern(default) |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.7 | ColumninactiveLineHguDsIgmpControlType | read-write | current | inactiveLineHguDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.8 | ColumninactiveLineHguDsIgmpVid | read-write | current | The HGU downstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.9 | ColumninactiveLineHguDsIgmpPri | read-write | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.10 | ColumninactiveLineHguDsIgmpRowStatus | read-write | current | RowStatus for ds igmp tag control. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.11 | ColumninactiveLineHguUsIgmpControlType | read-write | current | inactiveLineHguUsIgmpControlType: 0 transparent(default) 1 add tag 2 replace tag 3 replace only vid 4 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.12 | ColumninactiveLineHguUsIgmpVid | read-write | current | The HGU upstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.13 | ColumninactiveLineHguUsIgmpPri | read-write | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.14 | ColumninactiveLineHguUsIgmpRowStatus | read-write | current | RowStatus for us igmp tag control. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.5.1.1.15 | ColumninactiveLineHguMcastEportSwitch | read-write | current | inactiveLineHguMcastEportSwitch: 0 disable Hgu ctrl mcast base on eport(default) 1 enable Hgu ctrl mcast base on eport |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6 | TableinactiveRuleTable | not-accessible | current | inactive domain rule table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1 | RowinactiveRuleEntry | not-accessible | current | entry of inactive rule table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.1 | ColumninactiveRuleIndex | read-only | current | The index of rule table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.2 | ColumninactiveRuleName | read-write | current | rule description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.3 | ColumninactiveRuleAction | read-write | current | inactiveRuleAction: 0 permit 1 deny |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.4 | ColumninactiveRuleAuthMode | read-write | current | inactiveRuleAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.5 | ColumninactiveRuleAuthSn | read-write | current | auth sn, mix(string-hex) format or hex format. length: mix: 13 hex: 16 you can use '*' represents any one character or hexadecimal number. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.6 | ColumninactiveRuleAuthPw | read-write | current | auth password, string format or hex format. max length: string: 10 hex: 20 you can use '*' represents any one character or hexadecimal number |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.7 | ColumninactiveRuleAuthLoid | read-write | current | auth loid, string format, max length: 24. you can use '*' represents any one character or hexadecimal number |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.8 | ColumninactiveRuleAuthLopw | read-write | current | auth logic password, string format, max length: 12. you can use '*' represents any one character or hexadecimal number |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.9 | ColumninactiveRuleAssignedSlot | read-write | current | slot id pre assigned. if not configed, its '-'. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.10 | ColumninactiveRuleAssignedPport | read-write | current | pon port id pre assigned. if not configed, its '-'. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.11 | ColumninactiveRuleAssignedOnt | read-write | current | ont id pre assigned. if not configed, its '-'. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.12 | ColumninactiveRuleLineIndexesStr | read-write | current | String joined by rule bind line indexes, such as '12,56,1023'. A rule can at most bind 8 line models. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.13 | ColumninactiveRuleDefaultLine | read-write | current | The index of rule default line, should be inputted with <1-4096> The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.14 | ColumninactiveRuleRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.15 | ColumninactiveRuleOnceOnSwitch | read-write | current | inactiveUniqueOnceOnSwitch: 0 always on(default) 1 once on. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.16 | ColumninactiveRuleOnceOnAgingTime | read-write | current | aging time, hour, default value 0, means don't care aging time. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.17 | ColumninactiveRuleAuthSnFmt | read-write | current | Serial number format, mixed or hexadecimal. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.18 | ColumninactiveRuleAuthPwFmt | read-write | current | Password format, string or hexadecimal. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.6.1.19 | ColumninactiveRuleOntStatus | read-only | current | Ont status. 0: Ont has never been online 1: Ont online or offline |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7 | NodeinactiveUniqueConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1 | TableinactiveUniquePrimaryTable | not-accessible | current | inactive domain unique primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1 | RowinactiveUniquePrimaryEntry | not-accessible | current | entry of inactive unique primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.1 | ColumninactiveUniqueIndex | read-only | current | The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.2 | ColumninactiveUniqueName | read-write | current | unique name, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.3 | ColumninactiveUniqueSignFlag | read-write | current | inactiveUniqueSignFlag: 1 mode sn 2 mode loid 3 mode slot-id/pport-id/ont-id. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.4 | ColumninactiveUniqueSn | read-write | current | unique sn, now only support string-hex format, not support hex format, max length: 13. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.5 | ColumninactiveUniqueLoid | read-write | current | unique loid, now only support string format, max length: 24. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.6 | ColumninactiveUniqueSlotId | read-write | current | slot id. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.7 | ColumninactiveUniquePportId | read-write | current | pon port id. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.8 | ColumninactiveUniqueOntId | read-write | current | ont id. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.9 | ColumninactiveUniqueOntDesc | read-write | current | ont description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.10 | ColumninactiveUniqueRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.11 | ColumninactiveUniqueOnceOnSwitch | read-write | current | inactiveUniqueOnceOnSwitch: 0 always on(default) 1 once on. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.12 | ColumninactiveUniqueOnceOnAgingTime | read-write | current | aging time, default value 0, means don't care aging time. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.1.1.13 | ColumninactiveUniqueRangingBalance | read-write | current | ranging balance, default value 0, unit: m. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2 | TableinactiveUniqueSipAgentInfoTable | not-accessible | current | inactive domain unique voip sip agent info table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1 | RowinactiveUniqueSipAgentInfoEntry | not-accessible | current | entry of inactive unique voip sip agent info table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.1 | ColumninactiveUniqueIndexI | read-only | current | The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.2 | ColumninactiveUniqueSipProxyServerIp | read-write | current | voip sip agent info proxy server ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.3 | ColumninactiveUniqueSipOutboundProxyIp | read-write | current | voip sip agent info outbound proxy ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.4 | ColumninactiveUniqueSipRegisterServerIp | read-write | current | voip sip agent info register server ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.5 | ColumninactiveUniqueSipAgentInfoPort | read-write | current | voip sip agent info port. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.2.1.6 | ColumninactiveUniqueSipAgentInfoRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3 | TableinactiveUniqueSipUserAddrTable | not-accessible | current | inactive domain unique voip sip user ip address table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1 | RowinactiveUniqueSipUserAddrEntry | not-accessible | current | entry of inactive unique voip sip user ip address table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.1 | ColumninactiveUniqueIndexII | read-only | current | The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.2 | ColumninactiveUniqueSipuAddressIp | read-write | current | voip sip user ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.3 | ColumninactiveUniqueSipuAddressMask | read-write | current | voip sip user mask. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.4 | ColumninactiveUniqueSipuAddressVlan | read-write | current | voip sip user vlan. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.5 | ColumninactiveUniqueSipuAddressPri | read-write | current | voip sip user priroty. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.6 | ColumninactiveUniqueSipuAddressRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.7 | ColumninactiveUniqueSipuAddressGateway | read-write | current | voip sip user gateway. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.8 | ColumninactiveUniqueSipuAddressMasterDns | read-write | current | voip sip user master DNS. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.9 | ColumninactiveUniqueSipuAddressSlaveDns | read-write | current | voip sip user slave DNS. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.10 | ColumninactiveUniqueSipuAddressHost | read-write | current | voip sip user host. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.3.1.11 | ColumninactiveUniqueSipuAddressMode | read-write | current | voip sip user mode. 0(default): static ip mode; 1: dhcp mode. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4 | TableinactiveUniqueSipUserInfoTable | not-accessible | current | inactive domain unique voip sip user infomation table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1 | RowinactiveUniqueSipUserInfoEntry | not-accessible | current | entry of unique voip sip user infomation table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.1 | ColumninactiveUniqueIndexIII | read-only | current | The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.2 | ColumninactiveUniqueSipuInfoIndex | read-only | current | The index of voip sip user info, the 2nd index of this table. Should in <1-2>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.3 | ColumninactiveUniqueSipuInfoUserName | read-write | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.4 | ColumninactiveUniqueSipuInfoPassword | read-write | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.5 | ColumninactiveUniqueSipuInfoTelephone | read-write | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.4.1.6 | ColumninactiveUniqueSipuInfoRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.5 | TableinactiveUniqueSipDigitMapTable | not-accessible | current | inactive domain unique voip sip digit map table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1 | RowinactiveUniqueSipDigitMapEntry | not-accessible | current | entry of inactive unique voip sip digit map table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.1 | ColumninactiveUniqueIndexIV | read-only | current | The index of unique primary table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.2 | ColumninactiveUniqueSipdMapIndex | read-only | current | The index of voip digit map, the 2nd index of this table. Should in <1-10>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.3 | ColumninactiveUniqueSipdMapDialPlanToken | read-write | current | voip sip digit map dial plan token, max length: 28. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.5.1.4 | ColumninactiveUniqueSipdMapRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6 | TableinactiveUniqueGemportTable | not-accessible | current | inactive domain unique gemport table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1 | RowinactiveUniqueGemportEntry | not-accessible | current | entry of inactive unique gemport table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.1 | ColumninactiveUniqueIndexV | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.2 | ColumninactiveUniqueGemportIndex | read-only | current | The index of gemport, the 2nd index of this table. Should in <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.3 | ColumninactiveUniqueGemportVlanProfileId | read-write | current | The gemport vlan profile id, should be inputted with <0-4095>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.4 | ColumninactiveUniqueGemportUsProfileId | read-write | current | The gemport us traffic profile id, should be inputted with <0-4095>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.5 | ColumninactiveUniqueGemportDsProfileId | read-write | current | The gemport ds traffic profile id, should be inputted with <0-4095>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.6.1.6 | ColumninactiveUniqueGemportRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.7 | TableinactiveUniqueCportTable | not-accessible | current | inactive domain unique catv port management table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1 | RowinactiveUniqueCportEntry | not-accessible | current | entry of inactive unique catv port management table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.1 | ColumninactiveUniqueIndexVI | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.2 | ColumninactiveUniqueCportIndex | read-only | current | The index of catv port management, the 2nd index of this table. Should in <1-4>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.3 | ColumninactiveUniqueCportSwitch | read-write | current | inactiveUniqueCportSwitch: 0 disable 1 enable(default) |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.4 | ColumninactiveUniqueCportAgcMode | read-write | current | inactiveUniqueCportAgcMode: 0 No AGC 1 Broadband RF AGC 2 Optical AGC |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.7.1.5 | ColumninactiveUniqueCportAgcRange | read-write | current | catv port agc range, default: 0. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.8 | TableinactiveUniqueEportTable | not-accessible | current | inactive domain unique ethernet port management table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1 | RowinactiveUniqueEportEntry | not-accessible | current | entry of inactive unique ethernet port management table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.1 | ColumninactiveUniqueIndexVII | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.2 | ColumninactiveUniqueEportIndex | read-only | current | The index of ethernet port management, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.3 | ColumninactiveUniqueEportSwitch | read-write | current | inactiveUniqueEportSwitch: 0 enable(default) 1 disable |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.8.1.4 | ColumninactiveUniqueEportNegMode | read-write | current | neg mode contains duplex and speed. duplex: 0 auto, 1 full, 2 half speed: 0 auto, 1 10M, 2 100M, 3 1000M neg mode = duplex * 10 + speed. neg mode value 0 means… |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.9 | TableinactiveUniqueTcontTable | not-accessible | current | inactive domain unique tcont table, now only for tcont bind dba. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1 | RowinactiveUniqueTcontEntry | not-accessible | current | entry of inactive unique tcont table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.1 | ColumninactiveUniqueIndexVIII | read-only | current | The 1st index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.2 | ColumninactiveUniqueTcontIndex | read-only | current | The index of tcont, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.3 | ColumninactiveUniqueTcontDbaIndex | read-write | current | The index of tcont bind dba, should be inputted with <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.9.1.4 | ColumninactiveUniqueTcontRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.10 | TableinactiveUniqueAlarmRefTable | not-accessible | current | inactive unique alarm Reference table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1 | RowinactiveUniqueAlarmRefEntry | not-accessible | current | entry of inactive unique alarm Reference table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.1 | ColumninactiveUniqueAlarmRefUIndex | read-only | current | The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.2 | ColumninactiveUniqueAlarmRefAIndex | read-create | current | The index of alarm table to reference, Should in <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.3 | ColumninactiveUniqueAlarmRefAName | read-create | current | The entry name of alarm table to reference, Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.10.1.4 | ColumninactiveUniqueAlarmRefRowStatus | read-create | current | The row status of inactive unique alarm Reference table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.11 | TableinactiveUniqueManageTable | not-accessible | current | inactive unique management table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.11.1 | RowinactiveUniqueManageEntry | not-accessible | current | entry of inactive unique management table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.11.1.1 | ColumninactiveUniqueManageIndex | read-only | current | The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.11.1.2 | ColumninactiveUniqueManageProtocolPort80 | read-write | current | set protocol-port-80 disable mode discard or enable mode forward. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12 | TableinactiveUniqueWanTable | not-accessible | current | inactive unique wan table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1 | RowinactiveUniqueWanEntry | not-accessible | current | entry of inactive unique wan table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.1 | ColumninactiveUniqueWanIndex | read-only | current | The unique index of this table, should be inputted with <0-2047>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.2 | ColumninactiveUniqueWanNo | read-only | current | The unique index of this table, should be inputted with <1-4>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.3 | ColumninactiveUniqueWanMode | read-write | current | The unique wan mode of this table, should be inputted with <1-3>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.4 | ColumninactiveUniqueWanVlan | read-write | current | The unique wan vlan of this table, should be inputted with <1-4094>. 0 - Initial value and cannot be set to this value. 1..4094 - Valid Settings. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.5 | ColumninactiveUniqueWanPriority | read-write | current | The unique wan vlan priority of this table, should be inputted with <0-7>. 0..7 - Valid Settings. 8 - Initial value and cannot be set to this value. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.6 | ColumninactiveUniqueWanPppoeUsername | read-write | current | The unique wan pppoe mode user name of this table. 0 - Initial len and cannot be set to this len. 1..128 - Valid Settings. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.7 | ColumninactiveUniqueWanPppoePassword | read-write | current | The unique wan pppoe mode password of this table. 0 - Initial len and cannot be set to this len. 1..25 - Valid Settings. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.8 | ColumninactiveUniqueWanPppoeSerName | read-write | current | The unique wan pppoe mode service name of this table. 0 - Initial len and cannot be set to this len. 1..128 - Valid Settings. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.9 | ColumninactiveUniqueWanPppoeAuthMode | read-write | current | The unique wan pppoe mode authentication mode of this table. 0 - auto (the default) 1 - chap 2 - pap |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.10 | ColumninactiveUniqueWanPppoeConnMode | read-write | current | The unique wan pppoe mode connection mode of this table. 0 - always (the default) 1 - demand |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.11 | ColumninactiveUniqueWanPppoeNat | read-write | current | The unique wan pppoe mode NAT of this table. 0 - disable 1 - enable(the default) |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.12 | ColumninactiveUniqueWanPppoeReleTime | read-write | current | The unique wan pppoe mode release time of this table, should be inputted with <1-65535>. 0 - Initial value and cannot be set to this value. 1..65535 - Valid Se… |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.13 | ColumninactiveUniqueWanStaticIp | read-write | current | The unique wan static ip mode ip address of this table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.14 | ColumninactiveUniqueWanStaticMask | read-write | current | The unique wan static ip mode ip mask of this table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.15 | ColumninactiveUniqueWanStaticGateway | read-write | current | The unique wan static ip mode ip gateway of this table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.16 | ColumninactiveUniqueWanStaticMasterDns | read-write | current | The unique wan static ip mode master DNS of this table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.17 | ColumninactiveUniqueWanStaticSlaveDns | read-write | current | The unique wan static ip mode slave DNS of this table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.7.12.1.18 | ColumninactiveUniqueWanRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8 | NodeinactiveCtrlMcastConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.1 | TableinactiveCtrlMcastTable | not-accessible | current | inactive control multicast table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1 | RowinactiveCtrlMcastEntry | not-accessible | current | entry of inactive control muticast table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1.1 | ColumninactiveCtrlMcastIndex | read-only | current | The index of inactive control multicast table, should be inputted with <0-127>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1.2 | ColumninactiveCtrlMcastName | read-write | current | name of inactive control multicast entry. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.1.1.3 | ColumninactiveCtrlMcastRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2 | TableinactiveCtrlMcastOntTable | not-accessible | current | inactive domain control multicast base ont table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1 | RowinactiveCtrlMcastOntEntry | not-accessible | current | entry of inactive control multicast base ont table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.1 | ColumninactiveCtrlMcastIndexI | read-only | current | The index of control multicast profile. Should in <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.2 | ColumninactiveCtrlMcastEntryIndex | read-only | current | The index of control multicast entry, the 2nd index of this table. Should in <0-31>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.3 | ColumninactiveCtrlMcastAccessType | read-write | current | inactiveCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.4 | ColumninactiveCtrlMcastVid | read-write | current | control multicast vlan id, should be <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.5 | ColumninactiveCtrlMcastSrcIp | read-write | current | control multicast source ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.6 | ColumninactiveCtrlMcastDstStartIp | read-write | current | control multicast destination start ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.7 | ColumninactiveCtrlMcastDstEndIp | read-write | current | control multicast destination end ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.8 | ColumninactiveCtrlMcastGroupBw | read-write | current | control multicast group bandwidth, should be <1-1024000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.9 | ColumninactiveCtrlMcastDurationTimes | read-write | current | control multicast duration times, should be <10-6000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.10 | ColumninactiveCtrlMcastNumOfTimes | read-write | current | control multicast number of times, should be <1-255>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.11 | ColumninactiveCtrlMcastTimeInterval | read-write | current | control multicast time interval, should be <1-7200>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.12 | ColumninactiveCtrlMcastResetTime | read-write | current | control multicast reset time o'clock, should be <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.13 | ColumninactiveCtrlMcastNport | read-write | current | ethernet port number 1-24 of the entry assigned, default 25 means ctrl mcast base ont. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.8.2.1.14 | ColumninactiveCtrlMcastOntRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9 | NodeinactiveCtrlAlarmConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.1 | TableinactiveCtrlAlarmTable | not-accessible | current | inactive control alarm table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1 | RowinactiveCtrlAlarmEntry | not-accessible | current | entry of inactive control alarm table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.1 | ColumninactiveCtrlAlarmAimIndex | read-only | current | The index of inactive control alarm table, should be <0-127>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.2 | ColumninactiveCtrlAlarmAimName | read-create | current | the name of aim. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.3 | ColumninactiveCtrlAlarmReferLine | read-only | current | Line bitmap, each line references this aim. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.4 | ColumninactiveCtrlAlarmReferUnique | read-only | current | Unique bitmap, each unique references this aim. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.1.1.5 | ColumninactiveCtrlAlarmRowStatus | read-create | current | The inactive control alarm table rowStatus. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.2 | TableinactiveCtrlAlarmThrldTable | not-accessible | current | inactive control alarm threshold table. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1 | RowinactiveCtrlAlarmThrldEntry | not-accessible | current | entry of inactive control alarm threshold table |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.1 | ColumninactiveCtrlAlarmThrldAimIndex | read-only | current | The index of inactive control alarm threshold table, should be <0-127>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.2 | ColumninactiveCtrlAlarmThrldRxOrTx | read-only | current | The secend index of inactive control alarm threshold entry. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.3 | ColumninactiveCtrlAlarmThrldHigh | read-write | current | The high threshold of rx or tx alarm, The actual value is half the input value, if the threshold is rx, the actual value is the opposite. |
| 1.3.6.1.4.1.13464.1.14.1.1.2.9.2.1.4 | ColumninactiveCtrlAlarmThrldLow | read-write | current | The low threshold of rx or tx alarm, The actual value is half the input value, if the threshold is rx, the actual value is the opposite. |
| 1.3.6.1.4.1.13464.1.14.1.1.3 | NodedeployActive | |||
| 1.3.6.1.4.1.13464.1.14.1.1.3.1 | TableactiveAuthTable | not-accessible | current | active domain auth table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1 | RowactiveAuthEntry | not-accessible | current | entry of active auth table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.1 | ColumnactiveAuthIndex | read-only | current | The index of active auth table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.2 | ColumnactiveAuthDescription | read-only | current | auth description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.3 | ColumnactiveAuthMode | read-only | current | activeAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.4 | ColumnactiveAuthSn | read-only | current | auth sn, string-hex, max length: 16. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.5 | ColumnactiveAuthPw | read-only | current | auth password, string, max length: 20. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.6 | ColumnactiveAuthLoid | read-only | current | auth loid, max length: 24. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.7 | ColumnactiveAuthLopw | read-only | current | auth logic password, max length: 12. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.8 | ColumnactiveAuthAssignedSlot | read-only | current | slot id pre assigned. if not configed, its '-'. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.9 | ColumnactiveAuthAssignedPport | read-only | current | pon port id pre assigned. if not configed, its '-'. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.1.1.10 | ColumnactiveAuthAssignedOnt | read-only | current | ont id pre assigned. if not configed, its '-'. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2 | TableactiveDbaTable | not-accessible | current | active domain dba table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2.1 | RowactiveDbaEntry | not-accessible | current | entry of active dba table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2.1.1 | ColumnactiveDbaIndex | read-only | current | The index of active dba table, should be inputted with <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2.1.2 | ColumnactiveDbaDescription | read-only | current | active dba description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2.1.3 | ColumnactiveDbaType | read-only | current | activeDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2.1.4 | ColumnactiveDbaFixBandwidth | read-only | current | Must to be divisible by 64kbps, must not less than 128 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2.1.5 | ColumnactiveDbaAssuredBandwidth | read-only | current | Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.2.1.6 | ColumnactiveDbaMaxBandwidth | read-only | current | Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3 | NodeactiveLineCommonConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.1 | TableactiveLinePrimaryTable | not-accessible | current | active domain line primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1 | RowactiveLinePrimaryEntry | not-accessible | current | entry of active line primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.1 | ColumnactiveLineIndex | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.2 | ColumnactiveLineDeviceType | read-only | current | activeLineDeviceType: c30-214 2ETH(1ETH+1iTV)+1POTS SFU c30-400 4ETH SFU c30-401 4ETH+WIFI HGU c30-420 4ETH+2POTS SFU c30-423 4ETH+2POTS+WIFI+USB HGU c31-423 4… |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.3 | ColumnactiveLineDescription | read-only | current | line description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.4 | ColumnactiveLineTrafficMode | read-only | current | activeLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.1.1.5 | ColumnactiveLineMappingMode | read-only | current | activeLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.2 | TableactiveLineTcontTable | not-accessible | current | active domain line tcont table, now only for tcont bind dba. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.2.1 | RowactiveLineTcontEntry | not-accessible | current | entry of active line tcont table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.2.1.1 | ColumnactiveLineIndexI | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.2.1.2 | ColumnactiveLineTcontIndex | read-only | current | The index of tcont, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.2.1.3 | ColumnactiveLineTcontDbaIndex | read-only | current | The index of tcont bind dba, should be inputted with <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3 | TableactiveLineGemportTable | not-accessible | current | active domain line gemport table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1 | RowactiveLineGemportEntry | not-accessible | current | entry of active line gemport table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.1 | ColumnactiveLineIndexII | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.2 | ColumnactiveLineGemportIndex | read-only | current | The index of gemport, the 2nd index of this table. Should in <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.3 | ColumnactiveLineGemportVpStagged | read-only | current | activeLineGemportVpStagged: 0 false 1 true |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.4 | ColumnactiveLineGemportSvid | read-only | current | The gemport service vlan index, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.5 | ColumnactiveLineGemportPriority | read-only | current | The gemport priority, should be inputted with <0-7>. Now not use. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.6 | ColumnactiveLineGemportTcontId | read-only | current | The gemport bind tcont index, should be inputted with <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.7 | ColumnactiveLineGemportPq | read-only | current | The gemport priority queue, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.8 | ColumnactiveLineGemportCir | read-only | current | The gemport committed infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.9 | ColumnactiveLineGemportPir | read-only | current | The gemport peek infomation rate, should be inputted with <64-10240000>. must to be divisible by 64kbps,must not less than 64 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.10 | ColumnactiveLineGemportCbs | read-only | current | The gemport committed burst size, should be inputted with <2000-10240000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.3.1.11 | ColumnactiveLineGemportPbs | read-only | current | The gemport peek burst size, should be inputted with <2000-10240000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4 | TableactiveLineFlowmappingTable | not-accessible | current | active domain line flow mapping table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1 | RowactiveLineFlowmappingEntry | not-accessible | current | entry of active line flow mapping table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1.1 | ColumnactiveLineIndexIII | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1.2 | ColumnactiveLineFlowmappingIndex | read-only | current | The index of flowmapping, the 2nd index of this table. Should in <1-48>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1.3 | ColumnactiveLineFlowmappingVid | read-only | current | The flow mapping vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1.4 | ColumnactiveLineFlowmappingPriority | read-only | current | The flow mapping priority, should be inputted with <0-8>. Value 8 means don't care 802.1p priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1.5 | ColumnactiveLineFlowmappingEthport | read-only | current | The flow mapping ethernet port id, should be inputted with <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1.6 | ColumnactiveLineFlowmappingGemport | read-only | current | The flow mapping gem port id, should be inputted with <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.4.1.7 | ColumnactiveLineFlowmappingType | read-only | current | activeLineFlowmappingType: 0 flowmapping not base port. 1 flowmapping base eth port. 2 flowmapping base veip port. 3. flowmapping base iphost port. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5 | TableactiveLineAttrMgmtTable | not-accessible | current | active domain line attribute management table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1 | RowactiveLineAttrMgmtEntry | not-accessible | current | entry of active line attribute management table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.1 | ColumnactiveLineIndexIV | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.2 | ColumnactiveLineAttrMgmtIndex | read-only | current | The index of attribute management, the 2nd index of this table. Should in <1-64>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.3 | ColumnactiveLineAttrMgmtNportType | read-only | current | activeLineAttrMgmtNportType: 1 eth port in sfu 2 veip port in hgu 3 iphost virtual port, for voip, tdm, etc. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.4 | ColumnactiveLineAttrMgmtNport | read-only | current | The port of attribute management, if eport, should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.5 | ColumnactiveLineAttrMgmtEtypeFilter | read-only | current | activeLineAttrMgmtEtypeFilter: 0 no filter 1 filter ipoe frame 2 filter pppoe frame 3 filter arp frame |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.6 | ColumnactiveLineAttrMgmtVlanMode | read-only | current | activeLineAttrMgmtVlanMode: 0 transparent 1 tag 2 translation 3 trunk 4 QinQ |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.7 | ColumnactiveLineAttrMgmtCvlanVid | read-only | current | cvlan vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.8 | ColumnactiveLineAttrMgmtCvlanPri | read-only | current | The cvlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.9 | ColumnactiveLineAttrMgmtSvlanVid | read-only | current | svlan vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.3.5.1.10 | ColumnactiveLineAttrMgmtSvlanPri | read-only | current | svlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4 | NodeactiveLineSFUConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.1 | TableactiveLineSFUTable | not-accessible | current | active domain line SFU primary table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.1.1 | RowactiveLineSFUEntry | not-accessible | current | entry of active line sfu primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.1.1.1 | ColumnactiveLineIndexV | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.1.1.2 | ColumnactiveLineSfuLocalSwitch | read-only | current | activeLineSfuLocalSwitch: 0 disable(default) 1 enable. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.1.1.3 | ColumnactiveLineSfuLoopDetectSwitch | read-only | current | activeLineSfuLoopDetectSwitch: 0 disable(default) 1 enable. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2 | TableactiveLineSFUEthportTable | not-accessible | current | active domain line SFU ethernet port table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1 | RowactiveLineSFUEthportEntry | not-accessible | current | entry of active line SFU ethernet port table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.1 | ColumnactiveLineIndexVI | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.2 | ColumnactiveLineSfuEthportIndex | read-only | current | The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.3 | ColumnactiveLineSfuEthportSwitch | read-only | current | activeLineSfuEthportSwitch: 0 no shutdown(default) 1 shutdown |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.4 | ColumnactiveLineSfuEthportFlowCtrlSwitch | read-only | current | activeLineSfuEthportFlowCtrlSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.5 | ColumnactiveLineSfuEthportLoopbackSwitch | read-only | current | activeLineSfuEthportLoopbackSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.6 | ColumnactiveLineSfuEthportFastLeaveSwitch | read-only | current | activeLineSfuEthportFastLeaveSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.7 | ColumnactiveLineSfuEthportMaxGroups | read-only | current | The SFU ethernet port max igmp groups, should be inputted with <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.8 | ColumnactiveLineSfuEthportMaxMacCount | read-only | current | The SFU ethernet port max mac address count, should be inputted with <1-255>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.9 | ColumnactiveLineSfuEthportMcastMode | read-only | current | activeLineSfuEthportMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.10 | ColumnactiveLineSfuEthportDsIgmpControlType | read-only | current | activeLineSfuEthportDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.11 | ColumnactiveLineSfuEthportDsIgmpVid | read-only | current | The SFU ethernet port downstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.12 | ColumnactiveLineSfuEthportDsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.13 | ColumnactiveLineSfuEthportUsIgmpControlType | read-only | current | activeLineSfuEthportUsIgmpControlType: 0 transparent(default, only for read) 1 add tag 2 replace tag 3 replace only vid 4 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.14 | ColumnactiveLineSfuEthportUsIgmpVid | read-only | current | The SFU ethernet port upstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.15 | ColumnactiveLineSfuEthportUsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.16 | ColumnactiveLineSfuEthportBwCir | read-write | current | The SFU ethernet port bandwidth egress cir, should be inputted with <64-1024000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.17 | ColumnactiveLineSfuEthportBwCbs | read-write | current | The SFU ethernet port bandwidth egress cbs, should be inputted with <2-32000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.18 | ColumnactiveLineSfuEthportBwPir | read-write | current | The SFU ethernet port bandwidth egress pir, should be inputted with <64-1024000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.2.1.19 | ColumnactiveLineSfuEthportBwPbs | read-write | current | The SFU ethernet port bandwidth egress pbs, should be inputted with <2-32000>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3 | TableactiveLineSFUCtrlMcastTable | not-accessible | current | active domain line SFU ethernet port control multicast table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1 | RowactiveLineSFUCtrlMcastEntry | not-accessible | current | entry of active line SFU ethernet port control multicast table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.1 | ColumnactiveLineIndexVII | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.2 | ColumnactiveLineSfuEthportIndexI | read-only | current | The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.3 | ColumnactiveLineSfuCtrlMcastIndex | read-only | current | The index of SFU ethernet port control multicast, the 3rd index of this table. Should in <0-31>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.4 | ColumnactiveLineSfuCtrlMcastAccessType | read-only | current | activeLineSfuCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.5 | ColumnactiveLineSfuCtrlMcastVid | read-only | current | sfu control multicast vlan id, should be <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.6 | ColumnactiveLineSfuCtrlMcastSrcIp | read-only | current | sfu control multicast source ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.7 | ColumnactiveLineSfuCtrlMcastDstStartIp | read-only | current | sfu control multicast destination start ip address. 224.0.1.0-239.255.255.255 |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.8 | ColumnactiveLineSfuCtrlMcastDstEndIp | read-only | current | sfu control multicast destination end ip address. 224.0.1.0-239.255.255.255, must not smaller than the start ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.9 | ColumnactiveLineSfuCtrlMcastGroupBw | read-only | current | sfu control multicast group bandwidth, should be <1-1024000>. default 5000. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.10 | ColumnactiveLineSfuCtrlMcastDurationTimes | read-only | current | sfu control multicast duration times, should be <10-6000>. default 120(s). |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.11 | ColumnactiveLineSfuCtrlMcastNumOfTimes | read-only | current | sfu control multicast number of times, should be <1-255>. default 5. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.12 | ColumnactiveLineSfuCtrlMcastTimeInterval | read-only | current | sfu control multicast time interval, should be <1-7200>. default 120(s). |
| 1.3.6.1.4.1.13464.1.14.1.1.3.4.3.1.13 | ColumnactiveLineSfuCtrlMcastResetTime | read-only | current | sfu control multicast reset time, should be <1-24>. default 5(o'clock) |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5 | NodeactiveLineHGUConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1 | TableactiveLineHGUTable | not-accessible | current | active domain line HGU table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1 | RowactiveLineHGUEntry | not-accessible | current | entry of active line HGU table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.1 | ColumnactiveLineIndexVIII | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.2 | ColumnactiveLineHguSwitch | read-only | current | activeLineHguSwitch: 0 no shutdown(default) 1 shutdown |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.3 | ColumnactiveLineHguFastLeaveSwitch | read-only | current | activeLineHguFlowCtrlSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.4 | ColumnactiveLineHguMaxGroups | read-only | current | The HGU max igmp groups, should be inputted with <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.5 | ColumnactiveLineHguMaxMacCount | read-only | current | The HGU max mac address count, should be inputted with <1-255>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.6 | ColumnactiveLineHguMcastMode | read-only | current | activeLineHguMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.7 | ColumnactiveLineHguDsIgmpControlType | read-only | current | activeLineHguDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.8 | ColumnactiveLineHguDsIgmpVid | read-only | current | The HGU downstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.9 | ColumnactiveLineHguDsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.10 | ColumnactiveLineHguUsIgmpControlType | read-only | current | activeLineHguUsIgmpControlType: 0 transparent(default) 1 add tag 2 replace tag 3 replace only vid 4 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.11 | ColumnactiveLineHguUsIgmpVid | read-only | current | The HGU upstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.1.1.12 | ColumnactiveLineHguUsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2 | TableactiveLineHGUCtrlMcastTable | not-accessible | current | active domain line HGU control multicast table. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1 | RowactiveLineHGUCtrlMcastEntry | not-accessible | current | entry of active line HGU control multicast table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.1 | ColumnactiveLineIndexIX | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.2 | ColumnactiveLineHguCtrlMcastIndex | read-only | current | The index of HGU control multicast, the 2nd index of this table. Should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.3 | ColumnactiveLineHguCtrlMcastAccessType | read-only | current | activeLineHGUCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.4 | ColumnactiveLineHguCtrlMcastVid | read-only | current | hgu control multicast vlan id, should be <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.5 | ColumnactiveLineHguCtrlMcastSrcIp | read-only | current | hgu control multicast source ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.6 | ColumnactiveLineHguCtrlMcastDstStartIp | read-only | current | hgu control multicast destination start ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.7 | ColumnactiveLineHguCtrlMcastDstEndIp | read-only | current | hgu control multicast destination end ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.8 | ColumnactiveLineHguCtrlMcastGroupBw | read-only | current | hgu control multicast group bandwidth, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.9 | ColumnactiveLineHguCtrlMcastDurationTimes | read-only | current | hgu control multicast duration times, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.10 | ColumnactiveLineHguCtrlMcastNumOfTimes | read-only | current | hgu control multicast number of times, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.11 | ColumnactiveLineHguCtrlMcastTimeInterval | read-only | current | hgu control multicast time interval, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.5.2.1.12 | ColumnactiveLineHguCtrlMcastResetTime | read-only | current | hgu control multicast reset time, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6 | TableactiveRuleTable | not-accessible | current | active domain rule table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6.1 | RowactiveRuleEntry | not-accessible | current | entry of active rule table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6.1.1 | ColumnactiveRuleIndex | read-only | current | The index of rule table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6.1.2 | ColumnactiveRuleDescription | read-only | current | rule description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6.1.3 | ColumnactiveRuleAction | read-only | current | activeRuleAction: 0 permit 1 deny |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6.1.4 | ColumnactiveRuleAuthIndex | read-only | current | The index of rule bind auth, should be inputted with <1-4096> The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6.1.5 | ColumnactiveRuleLineIndexesStr | read-only | current | String joined by rule bind line indexes, such as '12,56,1023'. A rule can at most bind 8 line models. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.6.1.6 | ColumnactiveRuleDefaultLine | read-only | current | The index of rule default line, should be inputted with <1-4096> The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7 | NodeactiveUniqueConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.1 | TableactiveUniquePrimaryTable | not-accessible | current | active domain unique primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.1.1 | RowactiveUniquePrimaryEntry | not-accessible | current | entry of active unique primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.1.1.1 | ColumnactiveUniqueIndex | read-only | current | The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.1.1.2 | ColumnactiveUniqueDescription | read-only | current | unique description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.1.1.3 | ColumnactiveUniqueSn | read-only | current | unique sn, string-hex format, max length: 16. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.2 | TableactiveUniqueSipAgentInfoTable | not-accessible | current | active domain unique voip sip agent info table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.2.1 | RowactiveUniqueSipAgentInfoEntry | not-accessible | current | entry of active unique voip sip agent info table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.2.1.1 | ColumnactiveUniqueIndexI | read-only | current | The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.2.1.2 | ColumnactiveUniqueSipProxyServerIp | read-only | current | voip sip agent info proxy server ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.2.1.3 | ColumnactiveUniqueSipOutboundProxyIp | read-only | current | voip sip agent info outbound proxy ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.2.1.4 | ColumnactiveUniqueSipRegisterServerIp | read-only | current | voip sip agent info register server ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.2.1.5 | ColumnactiveUniqueSipAgentInfoPort | read-only | current | voip sip agent info port. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.3 | TableactiveUniqueSipUserAddrTable | not-accessible | current | active domain unique voip sip user ip address table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.3.1 | RowactiveUniqueSipUserAddrEntry | not-accessible | current | entry of active unique voip sip user ip address table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.3.1.1 | ColumnactiveUniqueIndexII | read-only | current | The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.3.1.2 | ColumnactiveUniqueSipuAddressIp | read-only | current | voip sip user ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.3.1.3 | ColumnactiveUniqueSipuAddressMask | read-only | current | voip sip user mask. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.3.1.4 | ColumnactiveUniqueSipuAddressVlan | read-only | current | voip sip user vlan. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.3.1.5 | ColumnactiveUniqueSipuAddressPri | read-only | current | voip sip user priroty. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.4 | TableactiveUniqueSipUserInfoTable | not-accessible | current | active domain unique voip sip user infomation table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.4.1 | RowactiveUniqueSipUserInfoEntry | not-accessible | current | entry of unique voip sip user infomation table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.4.1.1 | ColumnactiveUniqueIndexIII | read-only | current | The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.4.1.2 | ColumnactiveUniqueSipuInfoIndex | read-only | current | The index of voip sip user info, the 2nd index of this table. Should in <1-2>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.4.1.3 | ColumnactiveUniqueSipuInfoUserName | read-only | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.4.1.4 | ColumnactiveUniqueSipuInfoPassword | read-only | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.4.1.5 | ColumnactiveUniqueSipuInfoTelephone | read-only | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.5 | TableactiveUniqueSipDigitMapTable | not-accessible | current | active domain unique voip sip digit map table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.5.1 | RowactiveUniqueSipDigitMapEntry | not-accessible | current | entry of active unique voip sip digit map table |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.5.1.1 | ColumnactiveUniqueIndexIV | read-only | current | The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.5.1.2 | ColumnactiveUniqueSipdMapIndex | read-only | current | The index of voip digit map, the 2nd index of this table. Should in <1-10>. |
| 1.3.6.1.4.1.13464.1.14.1.1.3.7.5.1.3 | ColumnactiveUniqueSipdMapDialPlanToken | read-only | current | voip sip digit map dial plan token, max length: 28. |
| 1.3.6.1.4.1.13464.1.14.1.1.4 | NodedeployDemo | |||
| 1.3.6.1.4.1.13464.1.14.1.1.4.1 | TabledemoAuthTable | not-accessible | current | demo domain auth table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1 | RowdemoAuthEntry | not-accessible | current | entry of demo auth table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.1 | ColumndemoAuthIndex | read-only | current | The index of demo auth table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.2 | ColumndemoAuthDescription | read-only | current | auth description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.3 | ColumndemoAuthMode | read-only | current | demoAuthMode: 0 auth mode sn 1 auth mode pw 2 auth mode sn_pw 3 auth mode loid 4 auth mode lopw 5 auth mode loid_lopw |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.4 | ColumndemoAuthSn | read-only | current | auth sn, hex string, max length: 16. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.5 | ColumndemoAuthPw | read-only | current | auth password, hex string, max length: 20. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.6 | ColumndemoAuthLoid | read-only | current | auth loid, max length: 24. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.7 | ColumndemoAuthLopw | read-only | current | auth logic password, max length: 12. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.8 | ColumndemoAuthAssignedSlot | read-only | current | slot id pre assigned. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.9 | ColumndemoAuthAssignedPport | read-only | current | pon port id pre assigned. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.1.1.10 | ColumndemoAuthAssignedOnt | read-only | current | ont id pre assigned. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2 | TabledemoDbaTable | not-accessible | current | demo domain dba table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2.1 | RowdemoDbaEntry | not-accessible | current | entry of demo dba table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2.1.1 | ColumndemoDbaIndex | read-only | current | The index of demo dba table, should be inputted with <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2.1.2 | ColumndemoDbaDescription | read-only | current | demo dba description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2.1.3 | ColumndemoDbaType | read-only | current | demoDbaType, 1 fixed bandwidth 2 assured bandwidth 3 assured and max bandwidth 4 max bandwidth 5 fixed and assured and max bandwidth |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2.1.4 | ColumndemoDbaFixBandwidth | read-only | current | Must to be divisible by 64kbps, must not less than 128 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2.1.5 | ColumndemoDbaAssuredBandwidth | read-only | current | Must to be divisible by 64kbps, Can be 0. If not 0, it must be at least 256 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.2.1.6 | ColumndemoDbaMaxBandwidth | read-only | current | Must to be divisible by 64kbps, and must not be less than the sum of assured BW plus fixedBW. Must less than 1310720 kbps |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3 | NodedemoLineCommonConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.1 | TabledemoLinePrimaryTable | not-accessible | current | demo domain line primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.1.1 | RowdemoLinePrimaryEntry | not-accessible | current | entry of demo line primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.1.1.1 | ColumndemoLineIndex | read-only | current | The index of line primary table, should be inputted with <0-4095>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.1.1.2 | ColumndemoLineDeviceType | read-only | current | demoLineDeviceType: c30-214 2ETH(1ETH+1iTV)+1POTS SFU c30-400 4ETH SFU c30-401 4ETH+WIFI HGU c30-420 4ETH+2POTS SFU c30-423 4ETH+2POTS+WIFI+USB HGU c31-423 4ET… |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.1.1.3 | ColumndemoLineDescription | read-only | current | line description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.1.1.4 | ColumndemoLineTrafficMode | read-only | current | demoLineTrafficMode: 0 pri-queue: priority queue scheduling 1 gem-car: GEM traffic control |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.1.1.5 | ColumndemoLineMappingMode | read-only | current | demoLineMappingMode: 0 vlan 1 priority 2 vlan-priority 3 port 4 port-vlan 5 port-priority 6 port-vlan-priority |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.2 | TabledemoLineTcontTable | not-accessible | current | demo domain line tcont table, now only for tcont bind dba. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.2.1 | RowdemoLineTcontEntry | not-accessible | current | entry of demo line tcont table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.2.1.1 | ColumndemoLineTcontIndex | read-only | current | The index of tcont, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.2.1.2 | ColumndemoLineTcontDbaIndex | read-only | current | The index of tcont bind dba, should be inputted with <0-127>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3 | TabledemoLineGemportTable | not-accessible | current | demo domain line gemport table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1 | RowdemoLineGemportEntry | not-accessible | current | entry of demo line gemport table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.1 | ColumndemoLineGemportIndex | read-only | current | The index of gemport, the 2nd index of this table. Should in <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.2 | ColumndemoLineGemportSvid | read-only | current | The gemport service vlan index, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.3 | ColumndemoLineGemportTcontId | read-only | current | The gemport bind tcont index, should be inputted with <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.4 | ColumndemoLineGemportCir | read-only | current | The gemport committed infomation rate, should be inputted with <64-1310720>. must to be divisible by 64kbps,must not less than 64 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.5 | ColumndemoLineGemportPir | read-only | current | The gemport peek infomation rate, should be inputted with <64-1310720>. must to be divisible by 64kbps,must not less than 64 kbps. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.6 | ColumndemoLineGemportCbs | read-only | current | The gemport committed burst size, should be inputted with <2000-1310720>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.7 | ColumndemoLineGemportPbs | read-only | current | The gemport peek burst size, should be inputted with <2000-1310720>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.3.1.8 | ColumndemoLineGemportPq | read-only | current | The gemport priority queue, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4 | TabledemoLineFlowmappingTable | not-accessible | current | demo domain line flow mapping table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4.1 | RowdemoLineFlowmappingEntry | not-accessible | current | entry of demo line flow mapping table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4.1.1 | ColumndemoLineFlowmappingIndex | read-only | current | The index of flowmapping, the 2nd index of this table. Should in <1-48>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4.1.2 | ColumndemoLineFlowmappingVid | read-only | current | The flow mapping vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4.1.3 | ColumndemoLineFlowmappingPriority | read-only | current | The flow mapping priority, should be inputted with <0-8>. Value 8 means don't care 802.1p priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4.1.4 | ColumndemoLineFlowmappingEthport | read-only | current | The flow mapping ethernet port id, should be inputted with <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4.1.5 | ColumndemoLineFlowmappingGemport | read-only | current | The flow mapping gem port id, should be inputted with <1-24>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.4.1.6 | ColumndemoLineFlowmappingType | read-only | current | demoLineFlowmappingType: 0 flowmapping not base port. 1 flowmapping base eth port. 2 flowmapping base veip port. 3. flowmapping base iphost port. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5 | TabledemoLineAttrMgmtTable | not-accessible | current | demo domain line attribute management table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1 | RowdemoLineAttrMgmtEntry | not-accessible | current | entry of demo line attribute management table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.1 | ColumndemoLineAttrMgmtIndex | read-only | current | The index of attribute management, the 2nd index of this table. Should in <1-64>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.2 | ColumndemoLineAttrMgmtNport | read-only | current | The port of attribute management, if eport, should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.3 | ColumndemoLineAttrMgmtVlanMode | read-only | current | demoLineAttrMgmtVlanMode: 0 transparent 1 tag 2 translation 3 trunk 4 QinQ |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.4 | ColumndemoLineAttrMgmtNportType | read-only | current | demoLineAttrMgmtNportType: 1 eth port in sfu 2 veip port in hgu 3 iphost virtual port, for voip, tdm, etc. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.5 | ColumndemoLineAttrMgmtEtypeFilter | read-only | current | demoLineAttrMgmtEtypeFilter: 0 no filter 1 filter ipoe frame 2 filter pppoe frame 3 filter arp frame |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.6 | ColumndemoLineAttrMgmtCvlanVid | read-only | current | cvlan vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.7 | ColumndemoLineAttrMgmtCvlanPri | read-only | current | The cvlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.8 | ColumndemoLineAttrMgmtSvlanVid | read-only | current | svlan vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.3.5.1.9 | ColumndemoLineAttrMgmtSvlanPri | read-only | current | svlan priority, should be inputted with <0-8>. Value 8 means don't care vlan priority. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4 | NodedemoLineSFUConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.1 | TabledemoLineSFUTable | not-accessible | current | demo domain line SFU primary table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.1.1 | RowdemoLineSFUEntry | not-accessible | current | entry of demo line sfu primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.1.1.1 | ColumndemoLineSfuLocalSwitch | read-only | current | demoLineSfuLocalSwitch: 0 disable(default) 1 enable. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.1.1.2 | ColumndemoLineSfuLoopDetectSwitch | read-only | current | demoLineSfuLoopDetectSwitch: 0 disable(default) 1 enable. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2 | TabledemoLineSFUEthportTable | not-accessible | current | demo domain line SFU ethernet port table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1 | RowdemoLineSFUEthportEntry | not-accessible | current | entry of demo line SFU ethernet port table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.1 | ColumndemoLineSfuEthportIndex | read-only | current | The index of SFU ethernet port, the 2nd index of this table. Should in <1-8>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.2 | ColumndemoLineSfuEthportSwitch | read-only | current | demoLineSfuEthportSwitch: 0 no shutdown(default) 1 shutdown |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.3 | ColumndemoLineSfuEthportFlowCtrlSwitch | read-only | current | demoLineSfuEthportFlowCtrlSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.4 | ColumndemoLineSfuEthportLoopbackSwitch | read-only | current | demoLineSfuEthportLoopbackSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.5 | ColumndemoLineSfuEthportBwEgress | read-only | current | The SFU ethernet port max bandwidth egress, should be inputted with <64-1023936>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.6 | ColumndemoLineSfuEthportFastLeaveSwitch | read-only | current | demoLineSfuEthportFastLeaveSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.7 | ColumndemoLineSfuEthportMaxGroups | read-only | current | The SFU ethernet port max igmp groups, should be inputted with <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.8 | ColumndemoLineSfuEthportMaxMacCount | read-only | current | The SFU ethernet port max mac address count, should be inputted with <1-255>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.9 | ColumndemoLineSfuEthportMcastMode | read-only | current | demoLineSfuEthportMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.10 | ColumndemoLineSfuEthportDsIgmpControlType | read-only | current | demoLineSfuEthportDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.11 | ColumndemoLineSfuEthportDsIgmpVid | read-only | current | The SFU ethernet port downstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.12 | ColumndemoLineSfuEthportDsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.13 | ColumndemoLineSfuEthportUsIgmpControlType | read-only | current | demoLineSfuEthportUsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.14 | ColumndemoLineSfuEthportUsIgmpVid | read-only | current | The SFU ethernet port upstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.2.1.15 | ColumndemoLineSfuEthportUsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3 | TabledemoLineSFUCtrlMcastTable | not-accessible | current | demo domain line SFU ethernet port control multicast table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1 | RowdemoLineSFUCtrlMcastEntry | not-accessible | current | entry of demo line SFU ethernet port control multicast table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.1 | ColumndemoLineSfuCtrlMcastIndex | read-only | current | The index of SFU ethernet port control multicast, the 3rd index of this table. Should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.2 | ColumndemoLineSfuCtrlMcastAccessType | read-only | current | demoLineSfuCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.3 | ColumndemoLineSfuCtrlMcastVid | read-only | current | sfu control multicast vlan id, should be <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.4 | ColumndemoLineSfuCtrlMcastSrcIp | read-only | current | sfu control multicast source ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.5 | ColumndemoLineSfuCtrlMcastDstStartIp | read-only | current | sfu control multicast destination start ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.6 | ColumndemoLineSfuCtrlMcastDstEndIp | read-only | current | sfu control multicast destination end ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.7 | ColumndemoLineSfuCtrlMcastGroupBw | read-only | current | sfu control multicast group bandwidth, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.8 | ColumndemoLineSfuCtrlMcastDurationTimes | read-only | current | sfu control multicast duration times, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.9 | ColumndemoLineSfuCtrlMcastNumOfTimes | read-only | current | sfu control multicast number of times, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.10 | ColumndemoLineSfuCtrlMcastTimeInterval | read-only | current | sfu control multicast time interval, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.4.3.1.11 | ColumndemoLineSfuCtrlMcastResetTime | read-only | current | sfu control multicast reset time, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5 | NodedemoLineHGUConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1 | TabledemoLineHGUTable | not-accessible | current | demo domain line HGU table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1 | RowdemoLineHGUEntry | not-accessible | current | entry of demo line HGU table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.1 | ColumndemoLineHguSwitch | read-only | current | demoLineHguSwitch: 0 no shutdown(default) 1 shutdown |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.2 | ColumndemoLineHguFastLeaveSwitch | read-only | current | demoLineHguFlowCtrlSwitch: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.3 | ColumndemoLineHguMaxGroups | read-only | current | The HGU max igmp groups, should be inputted with <1-128>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.4 | ColumndemoLineHguMaxMacCount | read-only | current | The HGU max mac address count, should be inputted with <1-255>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.5 | ColumndemoLineHguMcastMode | read-only | current | demoLineHguMcastMode(some ont not support): 0 unconcern(default) 1 control 2 igmp snooping |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.6 | ColumndemoLineHguDsIgmpControlType | read-only | current | demoLineHguDsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.7 | ColumndemoLineHguDsIgmpVid | read-only | current | The HGU downstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.8 | ColumndemoLineHguDsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.9 | ColumndemoLineHguUsIgmpControlType | read-only | current | demoLineHguUsIgmpControlType: 0 transparent(default) 1 strip outer tag 2 add tag 3 replace tag 4 replace only vid 5 add only vid |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.10 | ColumndemoLineHguUsIgmpVid | read-only | current | The HGU upstream igmp and multicast control vid, should be inputted with <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.1.1.11 | ColumndemoLineHguUsIgmpPri | read-only | current | The vlan priority, should be inputted with <0-7>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2 | TabledemoLineHGUCtrlMcastTable | not-accessible | current | demo domain line HGU control multicast table. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1 | RowdemoLineHGUCtrlMcastEntry | not-accessible | current | entry of demo line HGU control multicast table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.1 | ColumndemoLineHguCtrlMcastIndex | read-only | current | The index of HGU control multicast, the 2nd index of this table. Should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.2 | ColumndemoLineHguCtrlMcastAccessType | read-only | current | demoLineHGUCtrlMcastAccessType: 0 del one entry 1 clear all entry 2 add permit entry 3 add preview entry |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.3 | ColumndemoLineHguCtrlMcastVid | read-only | current | hgu control multicast vlan id, should be <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.4 | ColumndemoLineHguCtrlMcastSrcIp | read-only | current | hgu control multicast source ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.5 | ColumndemoLineHguCtrlMcastDstStartIp | read-only | current | hgu control multicast destination start ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.6 | ColumndemoLineHguCtrlMcastDstEndIp | read-only | current | hgu control multicast destination end ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.7 | ColumndemoLineHguCtrlMcastGroupBw | read-only | current | hgu control multicast group bandwidth, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.8 | ColumndemoLineHguCtrlMcastDurationTimes | read-only | current | hgu control multicast duration times, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.9 | ColumndemoLineHguCtrlMcastNumOfTimes | read-only | current | hgu control multicast number of times, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.10 | ColumndemoLineHguCtrlMcastTimeInterval | read-only | current | hgu control multicast time interval, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.5.2.1.11 | ColumndemoLineHguCtrlMcastResetTime | read-only | current | hgu control multicast reset time, should be <x-x>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.6 | TabledemoRuleTable | not-accessible | current | demo domain rule table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.6.1 | RowdemoRuleEntry | not-accessible | current | entry of demo rule table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.6.1.1 | ColumndemoRuleIndex | read-only | current | The index of rule table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.6.1.2 | ColumndemoRuleDescription | read-only | current | rule description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.6.1.3 | ColumndemoRuleAction | read-only | current | demoRuleAction: 0 permit 1 deny |
| 1.3.6.1.4.1.13464.1.14.1.1.4.6.1.4 | ColumndemoRuleAuthIndex | read-only | current | The index of rule bind auth, should be inputted with <1-4096> The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.6.1.5 | ColumndemoRuleLineIndexesStr | read-only | current | String joined by rule bind line indexes, such as '12,56,1023'. A rule can at most bind 8 line models. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7 | NodedemoUniqueConfig | |||
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.1 | TabledemoUniquePrimaryTable | not-accessible | current | demo domain unique primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.1.1 | RowdemoUniquePrimaryEntry | not-accessible | current | entry of demo unique primary table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.1.1.1 | ColumndemoUniqueIndex | read-only | current | The index of unique primary table, should be inputted with <1-4096>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.1.1.2 | ColumndemoUniqueDescription | read-only | current | unique description, max length: 128. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.1.1.3 | ColumndemoUniqueSn | read-only | current | unique sn, hex format, max length: 16. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.2 | TabledemoUniqueSipAgentInfoTable | not-accessible | current | demo domain unique voip sip agent info table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.2.1 | RowdemoUniqueSipAgentInfoEntry | not-accessible | current | entry of demo unique voip sip agent info table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.2.1.1 | ColumndemoUniqueSipProxyServerIp | read-only | current | voip sip agent info proxy server ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.2.1.2 | ColumndemoUniqueSipOutboundProxyIp | read-only | current | voip sip agent info outbound proxy ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.2.1.3 | ColumndemoUniqueSipRegisterServerIp | read-only | current | voip sip agent info register server ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.2.1.4 | ColumndemoUniqueSipAgentInfoPort | read-only | current | voip sip agent info port. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.3 | TabledemoUniqueSipUserAddrTable | not-accessible | current | demo domain unique voip sip user ip address table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.3.1 | RowdemoUniqueSipUserAddrEntry | not-accessible | current | entry of demo unique voip sip user ip address table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.3.1.1 | ColumndemoUniqueSipuAddressIp | read-only | current | voip sip user ip address. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.3.1.2 | ColumndemoUniqueSipuAddressMask | read-only | current | voip sip user mask. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.3.1.3 | ColumndemoUniqueSipuAddressVlan | read-only | current | voip sip user vlan. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.4 | TabledemoUniqueSipUserInfoTable | not-accessible | current | demo domain unique voip sip user infomation table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.4.1 | RowdemoUniqueSipUserInfoEntry | not-accessible | current | entry of unique voip sip user infomation table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.4.1.1 | ColumndemoUniqueSipuInfoIndex | read-only | current | The index of voip sip user info, the 2nd index of this table. Should in <1-2>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.4.1.2 | ColumndemoUniqueSipuInfoUserName | read-only | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.4.1.3 | ColumndemoUniqueSipuInfoPassword | read-only | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.4.1.4 | ColumndemoUniqueSipuInfoTelephone | read-only | current | voip sip user infomation user name, max length: 25. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.5 | TabledemoUniqueSipDigitMapTable | not-accessible | current | demo domain unique voip sip digit map table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.5.1 | RowdemoUniqueSipDigitMapEntry | not-accessible | current | entry of demo unique voip sip digit map table |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.5.1.1 | ColumndemoUniqueSipdMapIndex | read-only | current | The index of voip digit map, the 2nd index of this table. Should in <1-10>. |
| 1.3.6.1.4.1.13464.1.14.1.1.4.7.5.1.2 | ColumndemoUniqueSipdMapDialPlanToken | read-only | current | voip sip digit map dial plan token, max length: 28. |
| 1.3.6.1.4.1.13464.1.14.1.1.5 | NodeconfigDeviceBaseInfo | |||
| 1.3.6.1.4.1.13464.1.14.1.1.5.1 | ScalaridleTimeout | read-write | current | system idle timout, unit is minute. |
| 1.3.6.1.4.1.13464.1.14.1.1.5.2 | ScalarloggingDisplaySwitch | read-write | current | loggingDisplaySwitch: 0 off(default) 1 on |
| 1.3.6.1.4.1.13464.1.14.1.1.5.3 | ScalarontLoggingDisplaySwitch | read-write | current | ontLoggingDisplaySwitch: 0 off(default) 1 on. |
| 1.3.6.1.4.1.13464.1.14.1.1.5.4 | TableponSwitchTable | not-accessible | current | pon switch table. |
| 1.3.6.1.4.1.13464.1.14.1.1.5.4.1 | RowponSwitchEntry | not-accessible | current | entry of pon switch table |
| 1.3.6.1.4.1.13464.1.14.1.1.5.4.1.1 | ColumnponSwitchVlanIndex | read-only | current | The index of this table, should be inputted with <1-4094>. The range is not always fit, please see range in commands. |
| 1.3.6.1.4.1.13464.1.14.1.1.5.4.1.2 | ColumnponSwitchEnable | read-only | current | |
| 1.3.6.1.4.1.13464.1.14.1.1.5.4.1.3 | ColumnponSwitchRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.1.5.5 | ScalardeactiveOntIdList | read-write | current | deactive ont id list, such as 0/8/1-0/8/10,0/10/10 |
| 1.3.6.1.4.1.13464.1.14.1.1.6 | NodeconfigEdfa | |||
| 1.3.6.1.4.1.13464.1.14.1.1.6.1 | ScalaredfaInternalTemperature | read-only | current | edfa internal temperature, unit is ��. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.2 | ScalaredfaInputPower1 | read-only | current | edfa input power1, unit is dBm. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.3 | ScalaredfaInputPower2 | read-only | current | edfa input power2, unit is dBm. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.4 | ScalaredfaActualOutputPower | read-only | current | edfa actual output power, unit is dBm. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.5 | ScalaredfaOutputAttenuator | read-write | current | edfa setting output attenuator, unit is dBm. range is -0.5 to 3. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.6 | ScalaredfaSerialNumber | read-only | current | edfa serial number. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.7 | ScalaredfaPumpBias1 | read-only | current | edfa pump bias, unit is A. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.8 | ScalaredfaPumpTemperature1 | read-only | current | edfa pump temperature, unit is ��. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.9 | ScalaredfaPumpTec1 | read-only | current | edfa pump temperature control current, unit is A. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.10 | ScalaredfaPumpBias2 | read-only | current | edfa pump bias, unit is A. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.11 | ScalaredfaPumpTemperature2 | read-only | current | edfa pump temperature, unit is ��. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.12 | ScalaredfaPumpTec2 | read-only | current | edfa pump temperature control current, unit is A. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.13 | ScalaredfaPowerVoltage | read-only | current | edfa power voltage, unit is V. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.14 | ScalaredfaHostname | read-write | current | edfa name of equipment. |
| 1.3.6.1.4.1.13464.1.14.1.1.6.15 | ScalaredfaReset | read-write | current | set edfaReset = 1 to reset all parameter. |
| 1.3.6.1.4.1.13464.1.14.1.2 | NodeconfigSlot | |||
| 1.3.6.1.4.1.13464.1.14.1.3 | NodeconfigPport | |||
| 1.3.6.1.4.1.13464.1.14.1.3.1 | TableontFindConfigTable | not-accessible | current | ont find config table |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1 | RowontFindConfigEntry | not-accessible | current | entry of ont find config table |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.1 | ColumncpSlotIndex | read-only | current | slot index, range <0-5>. |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.2 | ColumncpPportIndex | read-only | current | pon port index, range <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.3 | ColumnontFindConfigEnable | read-write | current | ontFindConfigEnable: 0 disable 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.4 | ColumnontFindConfigInterval | read-write | current | ont find interval time,range <3-30> seconds. |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.5 | ColumnontFindConfigAgeEnable | read-write | current | ontFindConfigAgeEnable: 0 disable 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.6 | ColumnontFindConfigAgingTime | read-write | current | ont find list aging time,range <1-86400> seconds. |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.7 | ColumnontFindConfigMinDistance | read-write | current | ont find min distance,range <0-40> km. |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.8 | ColumnontFindConfigMaxDistance | read-write | current | ont find min distance,range <0-60> km. |
| 1.3.6.1.4.1.13464.1.14.1.3.1.1.9 | ColumnontFindDistanceRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.3.2 | TableontSilentConfigTable | not-accessible | current | ont silent config table |
| 1.3.6.1.4.1.13464.1.14.1.3.2.1 | RowontSilentConfigEntry | not-accessible | current | entry of ont silent config table |
| 1.3.6.1.4.1.13464.1.14.1.3.2.1.1 | ColumncpSlotIndexI | read-only | current | slot index, range <0-5>. |
| 1.3.6.1.4.1.13464.1.14.1.3.2.1.2 | ColumncpPportIndexI | read-only | current | pon port index, range <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.3.2.1.3 | ColumnontSilentConfigAuthFailEnable | read-write | current | ontSilentConfigAuthFailEnable: 0 disable 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.3.2.1.4 | ColumnontSilentConfigAuthFailTime | read-write | current | ont silent auth fail silence time, range <1-86400> seconds. |
| 1.3.6.1.4.1.13464.1.14.1.3.2.1.5 | ColumnontSilentConfigOfflineEnable | read-write | current | ontSilentConfigOfflineEnable: 0 disable 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.3.2.1.6 | ColumnontSilentConfigOfflineTime | read-write | current | ont silent offline silence time, range <1-86400> seconds. |
| 1.3.6.1.4.1.13464.1.14.1.3.3 | TableconfigPportPrimaryTable | not-accessible | current | status pport primary table |
| 1.3.6.1.4.1.13464.1.14.1.3.3.1 | RowconfigPportPrimaryEntry | not-accessible | current | entry of ont find list table |
| 1.3.6.1.4.1.13464.1.14.1.3.3.1.1 | ColumncpSlotIndexII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.1.3.3.1.2 | ColumncpPportIndexII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.3.3.1.3 | ColumnpportAdminStatus | read-write | current | pportAdminStatus: 0 shutdown 1 no shutdown(default) |
| 1.3.6.1.4.1.13464.1.14.1.3.3.1.4 | ColumnpportLaserEnable | read-write | current | pportLaserEnable: 0 disable 1 enable(default) |
| 1.3.6.1.4.1.13464.1.14.1.3.4 | TableconfigPportFecTable | not-accessible | current | config pon port fec table |
| 1.3.6.1.4.1.13464.1.14.1.3.4.1 | RowconfigPportFecEntry | not-accessible | current | entry of pon port fec table |
| 1.3.6.1.4.1.13464.1.14.1.3.4.1.1 | ColumncpSlotIndexIII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.1.3.4.1.2 | ColumncpPportIndexIII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.3.4.1.3 | ColumnpportFecStatus | read-write | current | pportFecStatus: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.4 | NodeconfigOnt | |||
| 1.3.6.1.4.1.13464.1.14.1.4.1 | TableontManageTable | not-accessible | current | ont management table, such as reboot, ont statistics ethport switch, etc. |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1 | RowontManageEntry | not-accessible | current | entry of ont silent config table |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.1 | ColumncoSlotIndex | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.2 | ColumncoPportIndex | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.3 | ColumncoOntOnlineIndex | read-only | current | Ont online index, the 3rd index of this table. range is <1-128> |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.4 | ColumnontStatisticsEth | read-write | current | ontStatisticsEth: 0 disable(default) 1 enable. |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.5 | ColumnontStatisticsGem | read-write | current | ontStatisticsGem: 0 disable(default) 1 enable |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.6 | ColumnontReboot | read-write | current | set ontReboot=1 to reboot the ont, when read, always 0. |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.7 | ColumnontAdminState | read-write | current | ontAdminState: 0 deactive 1 active(default) |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.8 | ColumnontFactorySet | read-write | current | set ontFactorySet=1 to factory setting the ont, when read, always 0. |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.9 | ColumnprotocolPort80 | read-write | current | set protocol-port-80 disable mode discard or enable mode forward. |
| 1.3.6.1.4.1.13464.1.14.1.4.1.1.10 | ColumnrestoreFactory | read-write | current | factory setting restore. 0: wan 1: wifi |
| 1.3.6.1.4.1.13464.1.14.1.4.2 | IdentityontUpgradeTable | current | ont upgrade table | |
| 1.3.6.1.4.1.13464.1.14.1.4.2.1 | NodeontUpgradeEntry | |||
| 1.3.6.1.4.1.13464.1.14.1.4.2.1.1 | ScalarontUpgradeIdList | read-write | current | ont upgrade ont-id list. |
| 1.3.6.1.4.1.13464.1.14.1.4.2.1.2 | ScalarontUpgradeSn | read-write | current | ont upgrade ont sn. |
| 1.3.6.1.4.1.13464.1.14.1.4.2.1.3 | ScalarontUpgradeParams | read-write | current | ontUpgradeParams: 0 ont upgrade 1 ont upgrade commit. 2 ont auto-reboot 3 ont manual-reboot |
| 1.3.6.1.4.1.13464.1.14.1.4.2.1.4 | ScalarontUpgradeRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.13464.1.14.1.4.3 | TableontPortTable | not-accessible | current | ont port table, port config. |
| 1.3.6.1.4.1.13464.1.14.1.4.3.1 | RowontPortEntry | not-accessible | current | entry of ont port config table |
| 1.3.6.1.4.1.13464.1.14.1.4.3.1.1 | ColumnontPortSlotIndex | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.1.4.3.1.2 | ColumnontPortPportIndex | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.1.4.3.1.3 | ColumnontPortOntOnlineIndex | read-only | current | Ont online index, the 3rd index of this table. range is <1-128> |
| 1.3.6.1.4.1.13464.1.14.1.4.3.1.4 | ColumnontPortOntPortIndex | read-only | current | Ont port index, the 4th index of this table, range is <1-24> |
| 1.3.6.1.4.1.13464.1.14.1.4.3.1.5 | ColumnontPortShutdown | read-write | current | ontPortShutdown: 0 enable(default) 1 disable |
| 1.3.6.1.4.1.13464.1.14.2 | NodegponStatus | |||
| 1.3.6.1.4.1.13464.1.14.2.1 | NodestatusDevice | |||
| 1.3.6.1.4.1.13464.1.14.2.1.1 | NodedeployStatus | |||
| 1.3.6.1.4.1.13464.1.14.2.1.1.1 | ScalardeployStatusUserName | read-only | current | user name of deploy permission owner. |
| 1.3.6.1.4.1.13464.1.14.2.1.1.2 | ScalardeployStatusTerminal | read-only | current | terminal of deploy permission owner. |
| 1.3.6.1.4.1.13464.1.14.2.1.1.3 | ScalardeployStatusUserIp | read-only | current | ip address of deploy permission owner. |
| 1.3.6.1.4.1.13464.1.14.2.1.1.4 | ScalardeployStatusRequestTime | read-only | current | request time of deploy permission owner. |
| 1.3.6.1.4.1.13464.1.14.2.1.1.5 | ScalardeployStatusLastActiveTime | read-only | current | last active time of deploy permission owner. |
| 1.3.6.1.4.1.13464.1.14.2.1.2 | TabledeployHistoryTable | not-accessible | current | deploy history table |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1 | RowdeployHistoryEntry | not-accessible | current | entry of deploy history table |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1.1 | ColumndeployHistoryIndex | read-only | current | index of deploy history table. |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1.2 | ColumndeployHistoryUserName | read-only | current | user name of deploy history entry. |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1.3 | ColumndeployHistoryTerminal | read-only | current | terminal of deploy history entry. |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1.4 | ColumndeployHistoryUserIp | read-only | current | ip address of deploy history entry. |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1.5 | ColumndeployHistoryRequestTime | read-only | current | request time of deploy history entry. format: yyyy-mm-dd hh:mm:ss |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1.6 | ColumndeployHistoryActiveTimeList | read-only | current | active time list of deploy history entry. format: yyyy-mm-dd hh:mm:ss,...,.. |
| 1.3.6.1.4.1.13464.1.14.2.1.2.1.7 | ColumndeployHistoryReleaseTime | read-only | current | release time of deploy history entry. format: yyyy-mm-dd hh:mm:ss |
| 1.3.6.1.4.1.13464.1.14.2.1.3 | NodestatusDeviceBaseInfo | |||
| 1.3.6.1.4.1.13464.1.14.2.1.3.1 | ScalarcpuUsePercent | read-only | current | The percentage of use CPU in current system. |
| 1.3.6.1.4.1.13464.1.14.2.1.3.2 | ScalarmemUsePercent | read-only | current | The percentage of use memory in current system. |
| 1.3.6.1.4.1.13464.1.14.2.1.3.3 | ScalarswitchChipTemperature | read-only | current | The temperature of switch chip in current system. |
| 1.3.6.1.4.1.13464.1.14.2.1.3.4 | ScalarponChipTemperature | read-only | current | The temperature of pon chip in current system. |
| 1.3.6.1.4.1.13464.1.14.2.1.3.5 | ScalarontImageName | read-only | current | ont image name |
| 1.3.6.1.4.1.13464.1.14.2.1.3.6 | ScalarontImageLen | read-only | current | ont image length |
| 1.3.6.1.4.1.13464.1.14.2.2 | NodestatusSlot | |||
| 1.3.6.1.4.1.13464.1.14.2.2.1 | TablestatusSlotPrimaryTable | not-accessible | current | slot status primary table |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1 | RowstatusSlotPrimaryEntry | not-accessible | current | entry of slot status primary table |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.1 | ColumnssSlotIndex | read-only | current | slot index rang is 0 to 5 |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.2 | ColumnslotState | read-only | current | typedef enum { STATUS_DOWN = 0, STATUS_INIT, STATUS_LOAD, STATUS_REG, STATUS_CONFIG, STATUS_ONLINE }SLOT_STATUS_ENUM; |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.3 | ColumnslotConfigType | read-only | current | typedef enum tag_BOARD_TYPE { BOARD_TYPE_NULL = 0, BOARD_TYPE_CONTROL_BCM5670, BOARD_TYPE_LINE_24_GE_FIBER_BCM56504, BOARD_TYPE_LINE_24_GE_COPPER_BCM56504, BOA… |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.4 | ColumnslotTrueType | read-only | current | typedef enum tag_BOARD_TYPE { BOARD_TYPE_NULL = 0, BOARD_TYPE_CONTROL_BCM5670, BOARD_TYPE_LINE_24_GE_FIBER_BCM56504, BOARD_TYPE_LINE_24_GE_COPPER_BCM56504, BOA… |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.5 | ColumnslotTypeIsPon | read-only | current | slotTypeIsPon: 1 true 0 false |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.6 | ColumnslotConnected | read-only | current | slotConnected: 1 true 0 false |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.7 | ColumnslotMac | read-only | current | slot mac address |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.8 | ColumnslotSwVersion | read-only | current | slotSwVersion |
| 1.3.6.1.4.1.13464.1.14.2.2.1.1.9 | ColumnslotHwVersion | read-only | current | slotHwVersion |
| 1.3.6.1.4.1.13464.1.14.2.3 | NodestatusPport | |||
| 1.3.6.1.4.1.13464.1.14.2.3.1 | TableontFindListTable | not-accessible | current | ont find list table |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1 | RowontFindListEntry | not-accessible | current | entry of ont find list table |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.1 | ColumnspSlotIndex | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.2 | ColumnspPportIndex | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.3 | ColumnontFindListListId | read-only | current | The index of ont find list table. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.4 | ColumnontFindListSn | read-only | current | serial number of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.5 | ColumnontFindListPw | read-only | current | password of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.6 | ColumnontFindListLoid | read-only | current | logic id of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.7 | ColumnontFindListLopw | read-only | current | logic password of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.8 | ColumnontFindListVendorId | read-only | current | vendor id of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.9 | ColumnontFindListPriSwVer | read-only | current | primary software version of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.10 | ColumnontFindListSecSwVer | read-only | current | secondary software version of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.11 | ColumnontFindListHwVer | read-only | current | hardware version of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.12 | ColumnontFindListEquipId | read-only | current | equipment id of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.13 | ColumnontFindListFirstFindTime | read-only | current | first find time of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.14 | ColumnontFindListLastFindTime | read-only | current | last find time of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.1.1.15 | ColumnontFindListFindCnt | read-only | current | find count of ont find list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.2 | TableontSilentListTable | not-accessible | current | ont silent list table |
| 1.3.6.1.4.1.13464.1.14.2.3.2.1 | RowontSilentListEntry | not-accessible | current | entry of ont find list table |
| 1.3.6.1.4.1.13464.1.14.2.3.2.1.1 | ColumnspSlotIndexI | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.3.2.1.2 | ColumnspPportIndexI | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.3.2.1.3 | ColumnontSilentListListId | read-only | current | The index of ont silent list table. |
| 1.3.6.1.4.1.13464.1.14.2.3.2.1.4 | ColumnontSilentListSn | read-only | current | serial number of ont silent list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.2.1.5 | ColumnontSilentListTime | read-only | current | remain time of ont silent list entry, unit is second. |
| 1.3.6.1.4.1.13464.1.14.2.3.2.1.6 | ColumnontSilentListReason | read-only | current | silent reason of ont silent list entry. |
| 1.3.6.1.4.1.13464.1.14.2.3.3 | TablepportSfpTable | not-accessible | current | pport sfp info table |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1 | RowpportSfpEntry | not-accessible | current | entry of pport sfp info table |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.1 | ColumnspSlotIndexII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.2 | ColumnspPportIndexII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.3 | ColumnsfpTransceiverType | read-only | current | Sfp transceiver type. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.4 | ColumnsfpCompliance | read-only | current | Sfp compliance. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.5 | ColumnsfpConnectorType | read-only | current | Sfp connector type. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.6 | ColumnsfpWaveLength | read-only | current | Sfp wave length. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.7 | ColumnsfpTransferDistance | read-only | current | Sfp transfer distance. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.8 | ColumnsfpDigitalDiagMonitor | read-only | current | Sfp digital diagnostic monitoring. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.9 | ColumnsfpManuSerialNumber | read-only | current | Sfp manufacturing serial number. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.10 | ColumnsfpManufacturingDate | read-only | current | Sfp manufacturing date. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.11 | ColumnsfpVendorName | read-only | current | Sfp vendor name. |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.12 | ColumnsfpTemperature | read-only | current | Sfp temperature(��C). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.13 | ColumnsfpVoltage | read-only | current | Sfp voltage(V). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.14 | ColumnsfpBiasCurrent | read-only | current | Sfp bias current(mA). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.15 | ColumnsfpBiasHighThreshold | read-only | current | Sfp bias high threshold(mA). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.16 | ColumnsfpBiasLowThreshold | read-only | current | Sfp bias low threshold(mA). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.17 | ColumnsfpRXPower | read-only | current | Sfp rx power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.18 | ColumnsfpRXPowerHighThreshold | read-only | current | Sfp rx power high threshold(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.19 | ColumnsfpRXPowerLowThreshold | read-only | current | Sfp rx power low threshold(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.20 | ColumnsfpTXPower | read-only | current | Sfp tx power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.21 | ColumnsfpTXPowerHighThreshold | read-only | current | Sfp tx power high threshold(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.22 | ColumnsfpTXPowerLowThreshold | read-only | current | Sfp tx power low threshold(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.23 | ColumnsfpExist | read-only | current | sfpExist: 0 false 1 true |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.24 | ColumnsfpLinkState | read-only | current | sfpLinkState: 0 link down 1 link up |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.25 | ColumnsfpModuleType | read-only | current | sfpModuleType: 0 unknown 1 GPON |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.26 | ColumnsfpModuleSubType | read-only | current | sfpModuleSubType: 0 unknown 1 Class B+ 2 Class C+ |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.27 | ColumnsfpUsedType | read-only | current | sfpModuleSubType: 0 unknown 1 ONT |
| 1.3.6.1.4.1.13464.1.14.2.3.3.1.28 | ColumnsfpPartNumber | read-only | current | Sfp manufacturing type. |
| 1.3.6.1.4.1.13464.1.14.2.3.4 | TablestatusPportPrimaryTable | not-accessible | current | status pport primary table |
| 1.3.6.1.4.1.13464.1.14.2.3.4.1 | RowstatusPportPrimaryEntry | not-accessible | current | entry of ont find list table |
| 1.3.6.1.4.1.13464.1.14.2.3.4.1.1 | ColumnspSlotIndexIII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.3.4.1.2 | ColumnspPportIndexIII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.3.4.1.3 | ColumnpportLinkStatus | read-only | current | pportLinkStatus: 0 link down 1 link up |
| 1.3.6.1.4.1.13464.1.14.2.3.5 | TableportUtilizationTable | not-accessible | current | port utilization table |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1 | RowportUtilizationEntry | not-accessible | current | entry of port utilization table |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.1 | ColumnspSlotIndexPort | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.2 | ColumnspPortIndex | read-only | current | The index of port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.3 | ColumnspUtilizeTxOctetsRate | read-only | current | port tx octets rate. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.4 | ColumnspUtilizeRxOctetsRate | read-only | current | port rx octets rate. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.5 | ColumnspUtilizeTxBwThoughput | read-only | current | port tx bandwidth thoughput. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.6 | ColumnspUtilizeRxBwThoughput | read-only | current | port rx bandwidth thoughput. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.7 | ColumnspUtilizeTxPktsRate | read-only | current | port tx packets rate. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.8 | ColumnspUtilizeRxPktsRate | read-only | current | port rx packets rate. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.9 | ColumnspUtilizeTxOctetsMaxRate | read-only | current | port tx octets max rate. |
| 1.3.6.1.4.1.13464.1.14.2.3.5.1.10 | ColumnspUtilizeRxOctetsMaxRate | read-only | current | port rx octets max rate. |
| 1.3.6.1.4.1.13464.1.14.2.4 | NodestatusOnt | |||
| 1.3.6.1.4.1.13464.1.14.2.4.1 | NodeontInfo | |||
| 1.3.6.1.4.1.13464.1.14.2.4.1.1 | TableontBaseInfoTable | not-accessible | current | ont base infomation table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1 | RowontBaseInfoEntry | not-accessible | current | entry of ont base infomation table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.1 | ColumnsoSlotIndex | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.2 | ColumnsoPportIndex | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.3 | ColumnsoOntIndex | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.4 | ColumnontDescription | read-only | current | ont description. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.5 | ColumnontDeviceType | read-only | current | ont device type. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.6 | ColumnontRunStatus | read-only | current | ontRunStatus: 0 offline 1 online |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.7 | ColumnontDistance | read-only | current | ont distance. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.8 | ColumnontSn | read-only | current | ont serial number, hex string format. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.9 | ColumnontPw | read-only | current | ont password, hex string format. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.10 | ColumnontLoid | read-only | current | logical ont id, Charactor format. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.11 | ColumnontLopw | read-only | current | logical ont password, Charactor format. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.12 | ColumnontOfflineReason | read-only | current | |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.13 | ColumnontOnOfflineTime | read-only | current | ont on/off line time. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.1.1.14 | ColumnontUpDownTime | read-only | current | ont up/down time. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2 | TableontVersionInfoTable | not-accessible | current | ont version info table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1 | RowontVersionInfoEntry | not-accessible | current | entry of ont version info table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.1 | ColumnsoSlotIndexI | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.2 | ColumnsoPportIndexI | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.3 | ColumnsoOntIndexI | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.4 | ColumnontVendorId | read-only | current | ont vendor id. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.5 | ColumnontVersion | read-only | current | ont version. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.6 | ColumnontEquipmentId | read-only | current | ont equipment id. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.7 | ColumnontMainSwVersion | read-only | current | ont primary software version. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.2.1.8 | ColumnontSecondSwVersion | read-only | current | ont secondary software version. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3 | TableontCapabilityTable | not-accessible | current | ont capability info table. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1 | RowontCapabilityEntry | not-accessible | current | entry of ont capability info table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.1 | ColumnsoSlotIndexII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.2 | ColumnsoPportIndexII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.3 | ColumnsoOntIndexII | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.4 | ColumnontCapEquipId | read-only | current | ont equipment id. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.5 | ColumnontUplinkPonPortsNum | read-only | current | number of uplink PON ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.6 | ColumnontPotsPortsNum | read-only | current | number of POTS ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.7 | ColumnontEthPortsNum | read-only | current | number of ETH ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.8 | ColumnontTdmPortsNum | read-only | current | number of TDM ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.9 | ColumnontMocaPortsNum | read-only | current | number of MOCA ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.10 | ColumnontCatvAniPortsNum | read-only | current | number of CATV ANI ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.11 | ColumnontCatvUniPortsNum | read-only | current | number of CATV UNI ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.12 | ColumnontTcontsNum | read-only | current | number of T-CONTs. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.13 | ColumnontGemPortsNum | read-only | current | number of GEM ports. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.14 | ColumnontTrafficSchedulersNum | read-only | current | number of traffic schedulers. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.15 | ColumnontPqsInTconts | read-only | current | ont support ip configuration or not. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.16 | ColumnontIpConfigSupport | read-only | current | ont support ip configuration or not. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.17 | ColumnontFlowCtrlType | read-only | current | ont flow control type. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.18 | ColumnontTXpowerCutOffSupport | read-only | current | ont support TX power cut off or not. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.3.1.19 | ColumnontDbaMethod | read-only | current | ont dba method. NSR(default): not support SR SR: support SR -: invalid |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4 | TableontOpticalInfoTable | not-accessible | current | ont optical info table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1 | RowontOpticalInfoEntry | not-accessible | current | entry of ont optical info table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.1 | ColumnsoSlotIndexIII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.2 | ColumnsoPportIndexIII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.3 | ColumnsoOntIndexIII | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.4 | ColumnontVoltage | read-only | current | ont power feed voltage(V). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.5 | ColumnontRXPower | read-only | current | ont received optical power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.6 | ColumnontTXPower | read-only | current | ont mean optical launch power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.7 | ColumnontBiasCurrent | read-only | current | ont laser bias current(uA). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.8 | ColumnontTemperature | read-only | current | ont temperature(��C). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.9 | ColumnontRxCatvPower | read-only | current | ont received catv power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.10 | ColumnontTxCatvPower | read-only | current | ont transmitted catv power(dBmV). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.11 | ColumnontOltRxPower | read-only | current | olt received ont power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.4.1.12 | ColumnontOltTxPower | read-only | current | olt transmitted power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5 | TableontProfileInfoTable | not-accessible | current | ont optical info table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1 | RowontProfileInfoEntry | not-accessible | current | entry of ont profile info table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.1 | ColumnsoSlotIndexIV | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.2 | ColumnsoPportIndexIV | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.3 | ColumnsoOntIndexIV | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.4 | ColumnontProfileSn | read-only | current | ont sn |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.5 | ColumnontProfileVlanIdxes | read-only | current | vlan indexes ont used, such as '100,200,233'. if no vlan used, '-'. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.6 | ColumnontProfileVlanNames | read-only | current | vlan names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no vlan used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.7 | ColumnontProfileUsIdxes | read-only | current | us traffic indexes ont used, such as '100,200,233'. if no us traffic used, '-'. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.8 | ColumnontProfileUsNames | read-only | current | us traffic names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no us used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.9 | ColumnontProfileDsIdxes | read-only | current | ds traffic indexes ont used, such as '100,200,233'. if no ds traffic used, '-'. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.10 | ColumnontProfileDsNames | read-only | current | ds traffic names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no ds used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.11 | ColumnontProfileDbaIdxes | read-only | current | dba indexes ont used, such as '100,200,233'. if no dba used, '-'. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.12 | ColumnontProfileDbaNames | read-only | current | dba names ont used, such as 'INDEX_100,INDEX_200,INDEX_233'. if no dba used, '-'. Name list may too long to show. Suggest use ontProfileVlanIdxes above. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.13 | ColumnontProfileLineIdx | read-only | current | line id ont used. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.14 | ColumnontProfileLineName | read-only | current | line name ont used. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.15 | ColumnontProfileRuleIdx | read-only | current | rule id ont used. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.16 | ColumnontProfileRuleName | read-only | current | rule name ont used. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.17 | ColumnontProfileUniqueIdx | read-only | current | unique id ont used. if no unique used, '-' |
| 1.3.6.1.4.1.13464.1.14.2.4.1.5.1.18 | ColumnontProfileUniqueName | read-only | current | unique name ont used. if no unique used, '-' |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6 | TableontUpgradeStatusTable | not-accessible | current | ont upgrade status table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6.1 | RowontUpgradeStatusEntry | not-accessible | current | entry of ont upgrade status table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6.1.1 | ColumnsoSlotIndexV | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6.1.2 | ColumnsoPportIndexV | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6.1.3 | ColumnsoOntIndexV | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6.1.4 | ColumnontUpgradeActiveVer | read-only | current | ont upgrade active version. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6.1.5 | ColumnontUpgradeInactiveVer | read-only | current | ont upgrade inactive version. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.6.1.6 | ColumnontUpgradeStatus | read-only | current | ont upgrade status, such as success, crc error, timeout, offline, 0%-100%. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7 | TableontStatisticsTable | not-accessible | current | ont statistics table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1 | RowontStatisticsEntry | not-accessible | current | entry of ont statistics table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.1 | ColumnsoSlotIndexX | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.2 | ColumnsoPportIndexX | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.3 | ColumnsoOntIndexX | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.4 | ColumnontUsFrames | read-only | current | ont upstream frames. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.5 | ColumnontUsBytes | read-only | current | ont upstream bytes. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.6 | ColumnontDsFrames | read-only | current | ont downstream frames. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.7 | ColumnontDsBytes | read-only | current | ont downstream bytes. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.8 | ColumnontUsRate | read-only | current | ont upstream rate. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.7.1.9 | ColumnontDsRate | read-only | current | ont downstream rate. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8 | TableontUtilizationTable | not-accessible | current | ont utilization table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1 | RowontUtilizationEntry | not-accessible | current | entry of ont utilization table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.1 | ColumnsoSlotIndexXII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.2 | ColumnsoPportIndexXII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.3 | ColumnsoOntIndexXII | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.4 | ColumnsoUtilizeTxOctetsRate | read-only | current | ont tx octets rate. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.5 | ColumnsoUtilizeRxOctetsRate | read-only | current | ont rx octets rate. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.6 | ColumnsoUtilizeTxPktsRate | read-only | current | ont tx packets rate(pps). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.7 | ColumnsoUtilizeRxPktsRate | read-only | current | ont rx packets rate(pps). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.8 | ColumnsoUtilizeTxOctets | read-only | current | ont tx octets in 15 minutes. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.9 | ColumnsoUtilizeRxOctets | read-only | current | ont rx octets in 15 minutes. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.10 | ColumnsoUtilizeTxPktsError | read-only | current | port tx packets error in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.11 | ColumnsoUtilizeRxPktsError | read-only | current | port rx packets error in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.12 | ColumnsoUtilizeTxPktsDiscard | read-only | current | port tx packets discard in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.13 | ColumnsoUtilizeRxPktsDiscard | read-only | current | port rx packets discard in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.14 | ColumnsoUtilizeTxThroughput | read-only | current | port tx throughput. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.8.1.15 | ColumnsoUtilizeRxThroughput | read-only | current | port rx throughput. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9 | TableontOpticalSwTable | not-accessible | current | ont optical software table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1 | RowontOpticalSwEntry | not-accessible | current | entry of ont optical software table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.1 | ColumnsoSlotIndexXV | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.2 | ColumnsoPportIndexXV | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.3 | ColumnsoOntIndexXV | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.4 | ColumnontVoltageI | read-only | current | ont power feed voltage(V). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.5 | ColumnontRXPowerI | read-only | current | ont received optical power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.6 | ColumnontTXPowerI | read-only | current | ont mean optical launch power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.7 | ColumnontBiasCurrentI | read-only | current | ont laser bias current(uA). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.8 | ColumnontTemperatureI | read-only | current | ont temperature(��C). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.9 | ColumnontRxCatvPowerI | read-only | current | ont received catv power(dBm). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.9.1.10 | ColumnontTxCatvPowerI | read-only | current | ont transmitted catv power(dBmV). |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10 | TableontMacAddrTable | not-accessible | current | ont mac address table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1 | RowontMacAddrEntry | not-accessible | current | entry of ont mac address table |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.1 | ColumnontMacAddrVid | read-only | current | The vlan id index of ontMacAddrTable, should in <1-4094>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.2 | ColumnontMacAddress | read-only | current | The mac address index of ontMacAddrTable. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.3 | ColumnontMacAddrSlot | read-only | current | The slot of ontMacAddrEntry, should in <0-11>. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.4 | ColumnontMacAddrPport | read-only | current | The pon port of ontMacAddrEntry, should in <1-16> |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.5 | ColumnontMacAddrOnt | read-only | current | The ont id of ontMacAddrEntry, should in <1-128> |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.6 | ColumnontMacAddrSn | read-only | current | The ont sn of ontMacAddrEntry. |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.7 | ColumnontMacAddrGemU | read-only | current | The ont user gem of ontMacAddrEntry, should in <1-1024> 0: none 1-1024: valid |
| 1.3.6.1.4.1.13464.1.14.2.4.1.10.1.8 | ColumnontMacAddrGem | read-only | current | The ont gem of ontMacAddrEntry, should in <0-4095> |
| 1.3.6.1.4.1.13464.1.14.2.4.2 | NodeontEthPortInfo | |||
| 1.3.6.1.4.1.13464.1.14.2.4.2.1 | TableontEthportStateTable | not-accessible | current | ont ethport state table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1 | RowontEthportStateEntry | not-accessible | current | entry of ont ethport state table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1.1 | ColumnsoSlotIndexVI | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1.2 | ColumnsoPportIndexVI | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1.3 | ColumnsoOntIndexVI | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1.4 | ColumnsoOntEthportIndex | read-only | current | The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1.5 | ColumnontEthportAdminStatus | read-only | current | ont ethernet port admin status: 0 enable 1 disable. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1.6 | ColumnontEthportConnectState | read-only | current | ont ethernet port connect state. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.1.1.7 | ColumnontEthportPortSpeed | read-only | current | ont ethernet port speed. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2 | TableontEthportStatisRecTable | not-accessible | current | ont etherport statistics receive table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1 | RowontEthportStatisRecEntry | not-accessible | current | entry of ont etherport statistics receive table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.1 | ColumnsoSlotIndexVII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.2 | ColumnsoPportIndexVII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.3 | ColumnsoOntIndexVII | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.4 | ColumnsoOntEthportIndexI | read-only | current | The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.5 | ColumnontEthportRecFrames | read-only | current | Received frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.6 | ColumnontEthportRecUniFrames | read-only | current | Received unicast frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.7 | ColumnontEthportRecMulFrames | read-only | current | Received multicast frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.8 | ColumnontEthportRecBroFrames | read-only | current | Received broadcast frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.9 | ColumnontEthportRec64Frames | read-only | current | Received 64-byte frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.10 | ColumnontEthportRec65Frames | read-only | current | Received 65~127-byte frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.11 | ColumnontEthportRec128Frames | read-only | current | Received 128~255-byte frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.12 | ColumnontEthportRec256Frames | read-only | current | Received 256~511-byte frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.13 | ColumnontEthportRec512Frames | read-only | current | Received 512~1023-byte frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.14 | ColumnontEthportRec1024Frames | read-only | current | Received 1024~1518-byte frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.15 | ColumnontEthportRecUndFrames | read-only | current | Received undersize frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.16 | ColumnontEthportRecOveFrames | read-only | current | Received oversize frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.17 | ColumnontEthportRecFragments | read-only | current | Received fragments |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.18 | ColumnontEthportRecJabbers | read-only | current | Received jabbers |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.19 | ColumnontEthportRecFcsFrames | read-only | current | Received FCS error frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.20 | ColumnontEthportDisFrames | read-only | current | Discard frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.21 | ColumnontEthportRecAliFrames | read-only | current | Received alignment error frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.22 | ColumnontEthportMacRecFrames | read-only | current | MAC sub-layer received error frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.23 | ColumnontEthportPppFrames | read-only | current | PPPOE filtered frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.24 | ColumnontEthportBufReceive | read-only | current | Buffer overflows on receive |
| 1.3.6.1.4.1.13464.1.14.2.4.2.2.1.25 | ColumnontEthportRecBytes | read-only | current | Received bytes |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3 | TableontEthportStatisSentTable | not-accessible | current | ont etherport statistics sent table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1 | RowontEthportStatisSentEntry | not-accessible | current | entry of ont etherport statistics sent table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.1 | ColumnsoSlotIndexXI | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.2 | ColumnsoPportIndexXI | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.3 | ColumnsoOntIndexXI | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.4 | ColumnsoOntEthportIndexIII | read-only | current | The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.5 | ColumnontEthportSenFrames | read-only | current | Sent frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.6 | ColumnontEthportSenUniFrames | read-only | current | Sent unicast frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.7 | ColumnontEthportSenMulFrames | read-only | current | Sent multicast frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.8 | ColumnontEthportSenBroFrames | read-only | current | Sent broadcast frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.9 | ColumnontEthportCarFrames | read-only | current | Carrier sense error frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.10 | ColumnontEthportSqeMessages | read-only | current | SQE test error messages |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.11 | ColumnontEthportSenSinFrames | read-only | current | Sent single collision frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.12 | ColumnontEthportSenMulColFrames | read-only | current | Sent multiple collision frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.13 | ColumnontEthportSenExcFrames | read-only | current | Sent excessive collision frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.14 | ColumnontEthportLatFrames | read-only | current | Late collision frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.15 | ColumnontEthportMacSenFrames | read-only | current | MAC sub-layer sent error frames |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.16 | ColumnontEthportBufTransmit | read-only | current | Buffer overflows on transmit |
| 1.3.6.1.4.1.13464.1.14.2.4.2.3.1.17 | ColumnontEthportSentBytes | read-only | current | Sent bytes |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4 | TableontEthportUtilizationTable | not-accessible | current | ont ethport multicast mac table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1 | RowontEthportUtilizationEntry | not-accessible | current | entry of ont ethport multicast mac table |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.1 | ColumnsoSlotIndexVIII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.2 | ColumnsoPportIndexVIII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.3 | ColumnsoOntIndexVIII | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.4 | ColumnsoOntEthportIndexII | read-only | current | The index of ont ethernet port, the 4th index of this table. range <1-n> is determined by ont type, the max n is 2.4. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.5 | ColumnsoEportUtilizeTxOctetsRate | read-only | current | ont tx octets rate. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.6 | ColumnsoEportUtilizeRxOctetsRate | read-only | current | ont rx octets rate. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.7 | ColumnsoEportUtilizeTxPktsRate | read-only | current | ont tx packets rate(pps). |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.8 | ColumnsoEportUtilizeRxPktsRate | read-only | current | ont rx packets rate(pps). |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.9 | ColumnsoEportUtilizeTxOctets | read-only | current | ont tx octets in 15 minutes. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.10 | ColumnsoEportUtilizeRxOctets | read-only | current | ont rx octets in 15 minutes. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.11 | ColumnsoEportUtilizeTxPktsError | read-only | current | port tx packets error in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.12 | ColumnsoEportUtilizeRxPktsError | read-only | current | port rx packets error in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.13 | ColumnsoEportUtilizeTxPktsDiscard | read-only | current | port tx packets discard in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.2.4.1.14 | ColumnsoEportUtilizeRxPktsDiscard | read-only | current | port rx packets discard in 15 minute. |
| 1.3.6.1.4.1.13464.1.14.2.4.3 | NodeontGemPortInfo | |||
| 1.3.6.1.4.1.13464.1.14.2.4.3.1 | TableontGemportStatisticsTable | not-accessible | current | ont gemport statistics table |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1 | RowontGemportStatisticsEntry | not-accessible | current | entry of ont gemport statistics table |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.1 | ColumnsoSlotIndexIX | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.2 | ColumnsoPportIndexIX | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.3 | ColumnsoOntIndexIX | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.4 | ColumnontGemportStaFrameType | read-only | current | |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.5 | ColumnontGemportStaIndex | read-only | current | ontGemportStaIndex: The index should be inputed with <1-24> |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.6 | ColumnontGemportStaUpdateData | read-write | current | Set ontGemportStaUpdateData=2 to update data of the entry. then you can read this node. still 2 means update incomplete, 0 means update successfully, 1 means u… |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.7 | ColumnontGemportLostFrame | read-only | current | ontGemportLostFrame |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.8 | ColumnontGemportRecFrame | read-only | current | ontGemportRecFrame |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.9 | ColumnontGemportRecBlock | read-only | current | ontGemportRecBlock |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.10 | ColumnontGemportSentFrame | read-only | current | ontGemportSentFrame |
| 1.3.6.1.4.1.13464.1.14.2.4.3.1.1.11 | ColumnontGemportSentBlock | read-only | current | ontGemportSentBlock |
| 1.3.6.1.4.1.13464.1.14.2.4.4 | NodeontWanInfo | |||
| 1.3.6.1.4.1.13464.1.14.2.4.4.1 | TableontWanInfoTable | not-accessible | current | ont wan infomation table |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1 | RowontWanInfoEntry | not-accessible | current | entry of ont wan infomation table |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.1 | ColumnsoSlotIndexXIII | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.2 | ColumnsoPportIndexXIII | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.3 | ColumnsoOntIndexXIII | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.4 | ColumnontWanIndex | read-only | current | ontWanIndex: The index should be inputed with <1-4> |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.5 | ColumnontWanServerType | read-write | current | ont wan server type. |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.6 | ColumnontWanIp | read-only | current | ontGemportLostFrame |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.7 | ColumnontWanMask | read-only | current | ontGemportRecFrame |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.8 | ColumnontWanGateway | read-only | current | ontGemportRecBlock |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.9 | ColumnontWanPriDns | read-only | current | ontWanInfoEntry |
| 1.3.6.1.4.1.13464.1.14.2.4.4.1.1.10 | ColumnontWanSecDns | read-only | current | ontGemportSentBlock |
| 1.3.6.1.4.1.13464.1.14.2.4.5 | NodeontPotsInfo | |||
| 1.3.6.1.4.1.13464.1.14.2.4.5.1 | TableontPotsInfoTable | not-accessible | current | ont pots infomation table |
| 1.3.6.1.4.1.13464.1.14.2.4.5.1.1 | RowontPotsInfoEntry | not-accessible | current | entry of ont pots infomation table |
| 1.3.6.1.4.1.13464.1.14.2.4.5.1.1.1 | ColumnsoSlotIndexXIV | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.2.4.5.1.1.2 | ColumnsoPportIndexXIV | read-only | current | The index of pon port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.2.4.5.1.1.3 | ColumnsoOntIndexXIV | read-only | current | The index of ont, the 3rd index of this table. Should in <1-128>. |
| 1.3.6.1.4.1.13464.1.14.2.4.5.1.1.4 | ColumnontPotsIndex | read-only | current | ontWanIndex: The index should be inputed with <1-2> |
| 1.3.6.1.4.1.13464.1.14.2.4.5.1.1.5 | ColumnontPotsStatus | read-write | current | typedef enum tag_M_ONT_POTS_STATUS { /* 0 */ POTS_STATUS_INIT = 0, /* None/initial */ /* 1 */ POTS_STATUS_REGISTERED, /* Registered */ /* 2 */ POTS_STATUS_IN_S… |
| 1.3.6.1.4.1.13464.1.14.2.5 | NodestatusTrap | |||
| 1.3.6.1.4.1.13464.1.14.2.5.1 | NodedeviceTrap | |||
| 1.3.6.1.4.1.13464.1.14.2.5.1.1 | NotificationoltSwitchOverTrap | current | olt contrl-board switchover trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.2 | NotificationoltFanStatusTrap | current | olt fan status change trap. gponTrapExtraInfo: 1 stop 2 start 3 remove 4 insert | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.3 | NotificationoltPowerStatusTrap | current | olt power status trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.4 | NotificationoltTemperatureTrap | current | olt switch chip temperature trap. gponTrapExtraInfo: 1 low 2 high | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.5 | NotificationoltPonTemperatureTrap | current | olt pon chip temperature trap. gponTrapExtraInfo: 1 low 2 high | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.6 | NotificationunitOfflineAlarmTrap | current | unit offline alarm trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.7 | NotificationoltDgTrap | current | unit dying gasp trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.8 | NotificationedfaTrap | current | edfa trap. gponTrapExtraInfo: 1 Optical Input Power 1 2 Optical Input Power 2 3 Optical Output Power 4 Pump 1 Bias Current 5 Pump 1 Pump Temperature 6 Pump 1 P… | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.9 | NotificationoltDooralmTrap | current | olt door alarm trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.1.10 | NotificationwarningPortAlarmTrap | current | Warning port alarm. | |
| 1.3.6.1.4.1.13464.1.14.2.5.2 | NodeslotTrap | |||
| 1.3.6.1.4.1.13464.1.14.2.5.2.1 | NotificationoltBoardStatusTrap | current | olt board status trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.3 | NodeportTrap | |||
| 1.3.6.1.4.1.13464.1.14.2.5.3.1 | NotificationoltPortRingTrap | current | olt port ring trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.2 | NotificationoltPortSdTrap | current | olt port sd trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.3 | NotificationoltPportLOSTrap | current | olt pon port LOS trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.4 | NotificationoltPortSfpTcrossTrap | current | olt sfp threshold crossing alert trap. gponTrapExtraInfo: 1 recieve high 2 recieve low 3 send high 4 send low | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.5 | NotificationoltPortSfpUnplugTrap | current | olt pon port sfp unplug trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.6 | NotificationoltPortUdldTrap | current | UniDirectional Link Detection trap. gponTrapExtraInfo: 1 Undetermined 2 Unidirectional 3 Bidirectional | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.7 | NotificationoltPportLOFTrap | current | olt pon port LOF trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.8 | NotificationoltPortCRCTrap | current | olt port CRC trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.3.9 | NotificationoltPportRegOverTrap | current | olt pon port register over trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.4 | NodeontTrap | |||
| 1.3.6.1.4.1.13464.1.14.2.5.4.1 | NotificationontOnlineStatusTrap | current | ont online status trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.4.2 | Notificationont9843Trap | current | ont 984.3 warning trap. gponTrapExtraInfo: warning type: 1 LOSi 2 LOFi 3 DOWi 4 SFi 5 SDi 6 LCDGi 7 RDIi 8 SUFi 9 DFi 10 LOAi 11 LOKi 12 TIWi 13 DGi 14 LOAMi 1… | |
| 1.3.6.1.4.1.13464.1.14.2.5.4.3 | NotificationontRogueTrap | current | Rogue ont trap. gponTrapExtraInfo: rogue type: 1 continuous 2 intermittent | |
| 1.3.6.1.4.1.13464.1.14.2.5.4.4 | NotificationontAuthFailTrap | current | ont authentication failure trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.4.5 | NotificationontSfpTcrossTrap | current | ont sfp threshold crossing alert trap. gponTrapExtraInfo: 1 recieve high 2 recieve low 3 send high 4 send low | |
| 1.3.6.1.4.1.13464.1.14.2.5.5 | NodeontPortTrap | |||
| 1.3.6.1.4.1.13464.1.14.2.5.5.1 | NotificationontEthPortStatusTrap | current | ont ethernet port status trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.5.2 | NotificationontEthPortRingTrap | current | ont ethernet port ring trap. | |
| 1.3.6.1.4.1.13464.1.14.2.5.5.3 | NotificationontPotsH248Trap | current | ont pots h248 link trap. gponTrapExtraId: ont pots number | |
| 1.3.6.1.4.1.13464.1.14.2.5.6 | NodetrapInfo | |||
| 1.3.6.1.4.1.13464.1.14.2.5.6.1 | ScalargponTrapSlotId | accessible-for-notify | current | slot-id/fan-id/power-id in trap |
| 1.3.6.1.4.1.13464.1.14.2.5.6.2 | ScalargponTrapPortId | accessible-for-notify | current | port id in trap |
| 1.3.6.1.4.1.13464.1.14.2.5.6.3 | ScalargponTrapOntId | accessible-for-notify | current | ont id in trap |
| 1.3.6.1.4.1.13464.1.14.2.5.6.4 | ScalargponTrapOntEthportId | accessible-for-notify | current | ont ethernet port id in trap |
| 1.3.6.1.4.1.13464.1.14.2.5.6.5 | ScalargponTrapExtraId | accessible-for-notify | current | other id in trap, etc. |
| 1.3.6.1.4.1.13464.1.14.2.5.6.6 | ScalargponTrapStatus | accessible-for-notify | current | 1 alarm/linkdown/offline/open box 0 clear/linkup/online/close box |
| 1.3.6.1.4.1.13464.1.14.2.5.6.7 | ScalargponTrapExtraInfo | accessible-for-notify | current | trap extra infomation |
| 1.3.6.1.4.1.13464.1.14.2.5.6.8 | ScalargponTrapSn | accessible-for-notify | current | sn use for trap. |
| 1.3.6.1.4.1.13464.1.14.2.5.6.9 | ScalargponTrapLoid | accessible-for-notify | current | sn use for trap. |
| 1.3.6.1.4.1.13464.1.14.2.5.6.10 | ScalargponTrapSfpPerformanceStatus | accessible-for-notify | current | 0 normal 1 lolo 2 lo 3 hi 4 hihi |
| 1.3.6.1.4.1.13464.1.14.2.5.6.11 | ScalargponTrapWarnPortIndex | accessible-for-notify | current | Warn index 1 to 8 |
| 1.3.6.1.4.1.13464.1.14.2.5.6.12 | ScalargponTrapWarnPortAlarm | accessible-for-notify | current | 0 clear 1 warn |
| 1.3.6.1.4.1.13464.1.14.2.5.7 | NodetrapSetThreshold | |||
| 1.3.6.1.4.1.13464.1.14.2.5.7.1 | ScalarthresholdTemperatureHigh | read-write | current | temperature high threshold, default 60(��). |
| 1.3.6.1.4.1.13464.1.14.2.5.7.2 | ScalarthresholdTemperatureLow | read-write | current | temperature low threshold, default -25(��). |
| 1.3.6.1.4.1.13464.1.14.2.5.7.3 | ScalarthresholdRegOnt | read-write | current | ont register number threshold, default 64. |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4 | TableedfaThresholdTable | not-accessible | current | edfa threshold table |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1 | RowedfaThresholdEntry | not-accessible | current | entry of edfa threshold table |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1.1 | ColumnedfaTrapIndex | read-only | current | The index of edfa trap, see gponTrapExtraInfo in edfaTrap description. |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1.2 | ColumnedfaTrapDescription | read-only | current | The description of edfa trap, see gponTrapExtraInfo in edfaTrap description. |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1.3 | ColumnedfaTrapEnableSwitch | read-write | current | edfaTrapEnableSwitch: 0 disable 1 enable. |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1.4 | ColumnedfaThresholdLoLo | read-write | current | edfa threshold lolo. |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1.5 | ColumnedfaThresholdLo | read-write | current | edfa threshold lo. |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1.6 | ColumnedfaThresholdHi | read-write | current | edfa threshold hi. |
| 1.3.6.1.4.1.13464.1.14.2.5.7.4.1.7 | ColumnedfaThresholdHiHi | read-write | current | edfa threshold hihi. |
| 1.3.6.1.4.1.13464.1.14.2.5.8 | NodetrapClearThreshold | |||
| 1.3.6.1.4.1.13464.1.14.3 | NodeoemTrue | |||
| 1.3.6.1.4.1.13464.1.14.3.1 | NodetrueXmlOntConfig | |||
| 1.3.6.1.4.1.13464.1.14.3.1.1 | ScalartxocSlotId | read-write | current | ont slot id. |
| 1.3.6.1.4.1.13464.1.14.3.1.2 | ScalartxocPportId | read-write | current | ont pport id. |
| 1.3.6.1.4.1.13464.1.14.3.1.3 | ScalartxocOntId | read-write | current | ont id. |
| 1.3.6.1.4.1.13464.1.14.3.1.4 | ScalartxocServerIp | read-write | current | xml tftp server ip address. |
| 1.3.6.1.4.1.13464.1.14.3.1.5 | ScalartxocSn | read-write | current | xml sn. |
| 1.3.6.1.4.1.13464.1.14.3.1.6 | ScalartxocCrc | read-write | current | xml crc. |
| 1.3.6.1.4.1.13464.1.14.3.2 | NodetrueNameToIndex | |||
| 1.3.6.1.4.1.13464.1.14.3.2.1 | ScalartntiName | read-write | current | profile name. |
| 1.3.6.1.4.1.13464.1.14.3.2.2 | ScalartntiType | read-write | current | tntiType: 1 dba 2 vlan 3 us traffic 4 ds traffic 5 line 6 rule 7 unique. |
| 1.3.6.1.4.1.13464.1.14.3.2.3 | ScalartntiStatus | read-only | current | tntiStatus: 1 exist 2 not exist 3 full(& not exist). |
| 1.3.6.1.4.1.13464.1.14.3.2.4 | ScalartntiIndex | read-only | current | 1. if tntiStatus is 1(exist), tntiIndex is the index of tntiName. 2. if tntiStatus is 2(not exist), tntiIndex is the index of an empty entry. 3. if titiStatus … |
| 1.3.6.1.4.1.13464.1.14.3.3 | TabletrueNameToIndexTable | not-accessible | current | true name to index table |
| 1.3.6.1.4.1.13464.1.14.3.3.1 | RowtrueNameToIndexEntry | not-accessible | current | entry of true name to index table |
| 1.3.6.1.4.1.13464.1.14.3.3.1.1 | ColumntntitInputId | read-only | current | The index of socket, should in <0-4294967295>. |
| 1.3.6.1.4.1.13464.1.14.3.3.1.2 | ColumntntitName | read-write | current | profile name. |
| 1.3.6.1.4.1.13464.1.14.3.3.1.3 | ColumntntitType | read-write | current | tntiType: 1 dba 2 vlan 3 us traffic 4 ds traffic 5 line 6 rule 7 unique. |
| 1.3.6.1.4.1.13464.1.14.3.3.1.4 | ColumntntitStatus | read-only | current | tntiStatus: 1 exist 2 not exist 3 full(& not exist). |
| 1.3.6.1.4.1.13464.1.14.3.3.1.5 | ColumntntitProfileId | read-only | current | 1. if tntiStatus is 1(exist), tntitProfileId is the index of tntiName. 2. if tntiStatus is 2(not exist), tntitProfileId is the index of an empty entry. 3. if t… |
| 1.3.6.1.4.1.13464.1.14.4 | NodegponSwitch | |||
| 1.3.6.1.4.1.13464.1.14.4.1 | NodegponUdld | |||
| 1.3.6.1.4.1.13464.1.14.4.1.1 | TablegponUdldIfTable | not-accessible | current | gpon udld if table |
| 1.3.6.1.4.1.13464.1.14.4.1.1.1 | RowgponUdldIfEntry | not-accessible | current | entry of gpon udld if table |
| 1.3.6.1.4.1.13464.1.14.4.1.1.1.1 | ColumnguIfSlotIndex | read-only | current | The index of slot, should in <0-5>. |
| 1.3.6.1.4.1.13464.1.14.4.1.1.1.2 | ColumnguIfEportIndex | read-only | current | The index of eth port, should in <1-16>. |
| 1.3.6.1.4.1.13464.1.14.4.1.1.1.3 | ColumnguIfWorkmode | read-write | current | guIfWorkmode: 0 normal 1 aggressive. |
| 1.3.6.1.4.1.13464.1.14.4.1.2 | ScalarguDelaydownTime | read-write | current | udld delaydown-time, default 1(s). |
| 1.3.6.1.4.1.13464.1.14.4.2 | NodegponPower | |||
| 1.3.6.1.4.1.13464.1.14.4.2.1 | TablegponPowerTable | not-accessible | current | gpon power table |
| 1.3.6.1.4.1.13464.1.14.4.2.1.1 | RowgponPowerEntry | not-accessible | current | entry of gpon power table |
| 1.3.6.1.4.1.13464.1.14.4.2.1.1.1 | ColumnpowerIndex | read-only | current | Power index. |
| 1.3.6.1.4.1.13464.1.14.4.2.1.1.2 | ColumnpowerInsertedStaus | read-only | current | Power inserted status. |
| 1.3.6.1.4.1.13464.1.14.4.2.1.1.3 | ColumnpowerRunningStatus | read-only | current | Power running status. |
| 1.3.6.1.4.1.13464.1.14.4.3 | NodegponFan | |||
| 1.3.6.1.4.1.13464.1.14.4.3.1 | ScalargponFanInsertStatus | read-only | current | Fan insert status. |
| 1.3.6.1.4.1.13464.1.14.4.3.2 | TablegponFanTable | not-accessible | current | gpon fan table |
| 1.3.6.1.4.1.13464.1.14.4.3.2.1 | RowgponFanEntry | not-accessible | current | entry of gpon fan table |
| 1.3.6.1.4.1.13464.1.14.4.3.2.1.1 | ColumnfanIndex | read-only | current | Fan index. |
| 1.3.6.1.4.1.13464.1.14.4.3.2.1.2 | ColumnfanSpeed | read-only | current | Fan speed in rpm. |