NH218-MIB
78 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | -- NetworkAdress Counter enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.2 | Nodegswitch | |||
| 1.3.6.1.4.1.629.2.1 | ScalarnbsNPorts | read-only | mandatory | The number of ports in this device |
| 1.3.6.1.4.1.629.2.2 | NodenbsDevIdentify | |||
| 1.3.6.1.4.1.629.2.2.1 | ScalarnbsUpLinkType | read-only | mandatory | Up-Link Type of the device |
| 1.3.6.1.4.1.629.2.2.3 | ScalarnbsBaseHardVers | read-only | mandatory | Hardware version of base card |
| 1.3.6.1.4.1.629.2.2.4 | ScalarnbsCardHardVers | read-only | mandatory | Hardware version of the agent card |
| 1.3.6.1.4.1.629.2.2.5 | ScalarnbsUpLinkHardVers | read-only | mandatory | Up-Link hardware version |
| 1.3.6.1.4.1.629.2.2.6 | ScalarnbsSoftVers | read-only | mandatory | Agent software version |
| 1.3.6.1.4.1.629.2.2.9 | ScalarnbsSnifferPort | read-only | mandatory | Sniffer Port Number. Specify the Sniffer Port Number chosen by the user |
| 1.3.6.1.4.1.629.2.2.10 | ScalarnbsCreatinDate | read-only | mandatory | Agent software creation date and time |
| 1.3.6.1.4.1.629.2.3 | NodenbsDeviceControl | |||
| 1.3.6.1.4.1.629.2.3.6 | ScalarnbsSpanningTree | read-write | mandatory | Spanning Tree Enable. 1 - The BPDU(Bridge Protocol Data Unit) packets are treated as Multicast Packets, and therefore are forwarded to all ports. 2 - Forwards … |
| 1.3.6.1.4.1.629.2.3.7 | ScalarnbsLearningProcess | read-write | mandatory | Disable Learning Process. 1 - Learning Process is disabled. The Switch-G will not learn any new addresses from the wire. 2 - Learning Process is enabled |
| 1.3.6.1.4.1.629.2.3.8 | ScalarnbsParitionEnable | read-write | mandatory | Partition Mode Enable. When more then 32 collisions occur while transmitting, the Switch-G port enters to the Partition mode. It waits for the first good packe… |
| 1.3.6.1.4.1.629.2.3.9 | ScalarnbsRMONmode | read-write | mandatory | RMON Enable. 1 - The Switch-G enters the RMON mode(Station-to-Station connectivity Matrix). 2 - RMON disabled |
| 1.3.6.1.4.1.629.2.3.10 | ScalarnbsBufferThreshold | read-write | mandatory | Buffer Threshold Enable. Meaningful only when RMONEn bit (internal) is set. 1 - The buffers allocated to the ports are limited to the number which is written i… |
| 1.3.6.1.4.1.629.2.3.12 | ScalarnbsForwardMulticast | read-write | mandatory | Forward Multicast. Enable - multicast packets are Forwarded only to the CPU. Disable - multicast packets are being forward to all ports |
| 1.3.6.1.4.1.629.2.3.15 | ScalarnbsForwardUnkPkts | read-write | mandatory | Forward Unknown Packets. If defines whether the Switch-G will forward Unknown packets to the Agent CPU or not. 1 - Forwared, 2 - Do not forwared |
| 1.3.6.1.4.1.629.2.3.16 | ScalarnbsBackOffMode | read-write | mandatory | The CSMA/CD normal Back of mode multiples the back-off time frame after each each collision. In aggressive mode it stops to multiply after the second time. Thi… |
| 1.3.6.1.4.1.629.2.5 | NodenbsPortsControl | |||
| 1.3.6.1.4.1.629.2.5.1 | TablenbsPortsContTable | not-accessible | mandatory | A list of the port counters entries |
| 1.3.6.1.4.1.629.2.5.1.1 | RownbsPortsContEntry | not-accessible | mandatory | Contains the information necessary to configure/describe a port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted |
| 1.3.6.1.4.1.629.2.5.1.1.1 | ColumnnbsPortIndex1 | read-only | mandatory | The port# from 1 to nbsNPorts1 |
| 1.3.6.1.4.1.629.2.5.1.1.2 | ColumnnbsPortEnable | read-write | mandatory | Port Enable. 1 - Port is enabled 2 - Port is disabled |
| 1.3.6.1.4.1.629.2.5.1.1.3 | ColumnnbsPortDuplex | read-write | mandatory | Half/Full Duplex. 1 - Port works in Half-Duplex mode 2 - Port works in Full-Duplex mode |
| 1.3.6.1.4.1.629.2.5.1.1.5 | ColumnnbsPortMonitor | read-write | mandatory | Monitoring Mode. 1 - Port works in normal mode 2 - Port is set as Sniffer port (monitor mode) were all recived and transmit packats from all ports are sent to … |
| 1.3.6.1.4.1.629.2.5.1.1.6 | ColumnnbsPortPolDetection | read-write | mandatory | Auto-Polarity Disable. Enable/Disable Auto-Polarity detection function 1 - Disable 2 - Enable |
| 1.3.6.1.4.1.629.2.5.1.1.7 | ColumnnbsPortBroadcast | read-write | mandatory | Filter Broadcast. 1 - Broadcast packats are forwarded to all ports. 2 - The Switch-G discards Broadcast packats |
| 1.3.6.1.4.1.629.2.5.1.1.8 | ColumnnbsPortForwardUnk | read-write | mandatory | Forward Unknown. 1 - Unknown packats are forwarded. 2 - The Switch-G does not forward unknown packats to this port |
| 1.3.6.1.4.1.629.2.5.1.1.9 | ColumnnbsPortSpaning | read-write | mandatory | Spaning Tree Enable. Meaniningful only when Spaning Tree for the switch is set (nbsSpanningTree) is set. 1 - All packets are accepted. 2 - The Switch-G discard… |
| 1.3.6.1.4.1.629.2.5.1.1.10 | ColumnnbsPortSpeed | read-write | mandatory | Ports Speed. Meaningfull only for ports that support both 10 and 100 MBps speeds. 1 - Only for Uplink Ports: Switch-G - Ports ## 27,28 Switch-G - Ports ## 17,1… |
| 1.3.6.1.4.1.629.2.6 | NodenbsPortsStatus | |||
| 1.3.6.1.4.1.629.2.6.1 | TablenbsPortsStatTable | not-accessible | mandatory | A list of all the port status objects |
| 1.3.6.1.4.1.629.2.6.1.1 | RownbsPortsStatEntry | not-accessible | mandatory | The ports status information. port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted |
| 1.3.6.1.4.1.629.2.6.1.1.1 | ColumnnbsPortIndex | read-only | mandatory | The port# from 1 to nbsNPorts1 |
| 1.3.6.1.4.1.629.2.6.1.1.2 | ColumnnbsPortType | read-only | mandatory | Port Type |
| 1.3.6.1.4.1.629.2.6.1.1.3 | ColumnnbsPartition | read-only | mandatory | Ports Partition. Indicates the ports Partition status. 1 - No Partition (Normal mode) 2 - Partition |
| 1.3.6.1.4.1.629.2.6.1.1.4 | ColumnnbsLinkTest | read-only | mandatory | Ports Link Test Fail. Indicates the ports Link Test status 1 - Link Test Pass 2 - Link Test Fail |
| 1.3.6.1.4.1.629.2.7 | NodenbsPortsCounters | |||
| 1.3.6.1.4.1.629.2.7.1 | TablenbsPortsCountTable | not-accessible | mandatory | A list of the port counters entries |
| 1.3.6.1.4.1.629.2.7.1.1 | RownbsPortsCountEntry | not-accessible | mandatory | Contains the information necessary to configure/describe a port configuration. The number of rows/entries is fixed. A row/entry may not be created or deleted |
| 1.3.6.1.4.1.629.2.7.1.1.1 | ColumnnbsPortIndex2 | read-only | mandatory | The port# from 1 to nbsNPorts1 |
| 1.3.6.1.4.1.629.2.7.1.1.2 | ColumnnbsPortByteRec | read-only | mandatory | Good Bytes Recived |
| 1.3.6.1.4.1.629.2.7.1.1.3 | ColumnnbsPortMulByteRec | read-only | mandatory | Good Multicast Bytes Recived |
| 1.3.6.1.4.1.629.2.7.1.1.4 | ColumnnbsPortBroadByteRec | read-only | mandatory | Good Broadcast Bytes Recived |
| 1.3.6.1.4.1.629.2.7.1.1.5 | ColumnnbsPortByteSent | read-only | mandatory | Good Bytes Sent |
| 1.3.6.1.4.1.629.2.7.1.1.6 | ColumnnbsPortFramesRec | read-only | mandatory | Good Frames Recived |
| 1.3.6.1.4.1.629.2.7.1.1.7 | ColumnnbsPortMulFramesRec | read-only | mandatory | Good Multicast Frames Recived |
| 1.3.6.1.4.1.629.2.7.1.1.8 | ColumnnbsPortBroadFramesRec | read-only | mandatory | Broadcast Frames Recived |
| 1.3.6.1.4.1.629.2.7.1.1.9 | ColumnnbsPortFramesSent | read-only | mandatory | Frames Sent |
| 1.3.6.1.4.1.629.2.7.1.1.10 | ColumnnbsPortCollisions | read-only | mandatory | Recive and Transmit Collision |
| 1.3.6.1.4.1.629.2.7.1.1.11 | ColumnnbsPortLateColl | read-only | mandatory | Recive and Transmit Late Collision |
| 1.3.6.1.4.1.629.2.7.1.1.12 | ColumnnbsPortCRCAligErr | read-only | mandatory | Recive CRC or Alignment Error |
| 1.3.6.1.4.1.629.2.7.1.1.13 | ColumnnbsPortFramesShort | read-only | mandatory | Recive Frames |
| 1.3.6.1.4.1.629.2.7.1.1.14 | ColumnnbsPortFrameLong | read-only | mandatory | Recive Frames > 1518 bytes with Good CRC |
| 1.3.6.1.4.1.629.2.7.1.1.15 | ColumnnbsPortJabber | read-only | mandatory | Recive Frames > 1518 bytes with Bad CRC |
| 1.3.6.1.4.1.629.2.7.1.1.16 | ColumnnbsPortBadByteRec | read-only | mandatory | Bad Bytes Recived. Bytes with CRC errors and frame too long |
| 1.3.6.1.4.1.629.2.8 | NodenbsAddressTable | |||
| 1.3.6.1.4.1.629.2.8.1 | TablenbsMACAddrTable | not-accessible | mandatory | The DRAM address table contains all the MAC addresses up to 8K records. |
| 1.3.6.1.4.1.629.2.8.1.1 | RownbsMACAddrEntry | not-accessible | mandatory | The entries (records) |
| 1.3.6.1.4.1.629.2.8.1.1.1 | ColumnnbsAddrIndex | read-only | mandatory | An index from 1 to 8K. * (number of devices+1) |
| 1.3.6.1.4.1.629.2.8.1.1.3 | ColumnnbsMACAddress | read-write | mandatory | The MAC Address where the packet came from |
| 1.3.6.1.4.1.629.2.8.1.1.4 | ColumnnbsAddrPort | read-write | mandatory | The source port in this device |
| 1.3.6.1.4.1.629.2.8.1.1.5 | ColumnnbsAddrStatic | read-write | mandatory | Static indecation bit in the MAC Address entry |
| 1.3.6.1.4.1.629.2.8.1.1.6 | ColumnnbsAddrForwardTo | read-write | mandatory | This indicates whether to forward frames destined to this MAC address to all ports or only to the destination port |
| 1.3.6.1.4.1.629.2.9 | NodenbsSlotsTable | |||
| 1.3.6.1.4.1.629.2.9.1 | TablenbsCardsTable | not-accessible | mandatory | define the Cards' Types (for NH5500 and other GSWITCH HUBS..). |
| 1.3.6.1.4.1.629.2.9.1.1 | RownbsCardsEntry | not-accessible | mandatory | The entries (records) |
| 1.3.6.1.4.1.629.2.9.1.1.1 | ColumnnbsCardIndex | read-only | mandatory | The slot#. An index from 1 to The number of slots. |
| 1.3.6.1.4.1.629.2.9.1.1.2 | ColumnnbsCardType | read-only | mandatory | The Card's type: copper20Ethernet10or100Base (2) - Slot including 20 fast copper 10/100 MBps Ports; copper40Ethernet10Base (3) - Slot including 40 normal coppe… |
| 1.3.6.1.4.1.629.2.10 | ScalarnbsNMacRecords | read-only | mandatory | The number of Records (addresses) in the MAC table |
| 1.3.6.1.4.1.629.2.11 | ScalarnbsMacFirstGap | read-only | mandatory | The index of the first gap (empty record) in the MAC table |
| 1.3.6.1.4.1.629.2.12 | NodenbsPALPorts | |||
| 1.3.6.1.4.1.629.2.12.1 | TablenbsPALPortsTable | not-accessible | mandatory | Table contain data only for the existing PAL modules ports. |
| 1.3.6.1.4.1.629.2.12.1.1 | RownbsPALPortsEntry | not-accessible | mandatory | The PAL Optic Power Ports status. |
| 1.3.6.1.4.1.629.2.12.1.1.1 | ColumnnbsPALPortIndex | read-only | mandatory | The number of the real existing PAL port. (the same as [ifIndex] in the MIB-II). |
| 1.3.6.1.4.1.629.2.12.1.1.2 | ColumnnbsPALPortOpticPower | read-only | mandatory | PAL Port Optic Power status. (interval: 0 - 15) |