NMS-EPON-OLT-PON
58 objects
No module-level DESCRIPTION found.
Imported Objects
| NMS-OPTICAL-PORT-MIB | opIfCurrent opIfTemperature opIfTxPowerCurr opIfVolt |
| NMS-SMI | nmsEPONGroup |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress |
| RFC1213-MIB | DisplayString ifDescr PhysAddress |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3320.101.6 | NodenmsEponOltPon | |||
| 1.3.6.1.4.1.3320.101.6.1 | TablenmseponoltponTable | not-accessible | mandatory | A list of epon olt pon property table entries. |
| 1.3.6.1.4.1.3320.101.6.1.1 | RownmsEponOltPonEntry | not-accessible | mandatory | A collection of additional objects in the epon olt pon property table. |
| 1.3.6.1.4.1.3320.101.6.1.1.1 | ColumnponIfIndex | read-only | mandatory | The only diid of PON port in System. |
| 1.3.6.1.4.1.3320.101.6.1.1.2 | ColumnllidSequenceNo | read-only | mandatory | Currnet LLID seqence number. |
| 1.3.6.1.4.1.3320.101.6.1.1.3 | ColumnonuAuthMethod | read-write | mandatory | ONU authentication method. |
| 1.3.6.1.4.1.3320.101.6.1.1.4 | ColumnisCheckOnuMac | read-only | mandatory | Check ONU MAC when registering. |
| 1.3.6.1.4.1.3320.101.6.1.1.5 | ColumnisPONBelongtoPSG | read-only | mandatory | Check if PON belongs to PSG. |
| 1.3.6.1.4.1.3320.101.6.1.1.6 | ColumnpONBelongtoPSGID | read-only | mandatory | PSG ID that PON belongs to. |
| 1.3.6.1.4.1.3320.101.6.1.1.7 | ColumnisUsingMpcpRegisteAckDelayTime | read-write | mandatory | If using MPCP registe Ack delay time. |
| 1.3.6.1.4.1.3320.101.6.1.1.8 | ColumnmpcpRegisteAckDelayTime | read-write | mandatory | MPCP registe Ack delay time,range is 1-50ms. |
| 1.3.6.1.4.1.3320.101.6.1.1.9 | ColumnponIfAdminStatus | read-write | mandatory | PON interface Administration Status. |
| 1.3.6.1.4.1.3320.101.6.1.1.10 | ColumnponIfInFecStatus | read-write | mandatory | PON interface in FEC Status. |
| 1.3.6.1.4.1.3320.101.6.1.1.11 | ColumnponIfOutFecStatus | read-write | mandatory | PON interface out FEC Status. |
| 1.3.6.1.4.1.3320.101.6.1.1.12 | ColumnponIfLaserStatus | read-write | mandatory | PON interface Laser Status. |
| 1.3.6.1.4.1.3320.101.6.1.1.13 | ColumnisOnuDataSwitch | read-write | mandatory | PON interface data exchange Status with ONU. |
| 1.3.6.1.4.1.3320.101.6.1.1.14 | ColumnponIfProtectedStatus | read-write | mandatory | PON interface protected Status. |
| 1.3.6.1.4.1.3320.101.6.1.1.15 | ColumnponIfDynamicMacLearningStatus | read-write | mandatory | PON interface dynamic MAC address learning Status. |
| 1.3.6.1.4.1.3320.101.6.1.1.16 | ColumnponIfMacACL | read-write | mandatory | PON interface MAC address ACL. |
| 1.3.6.1.4.1.3320.101.6.1.1.17 | ColumnponIfIpACL | read-write | mandatory | PON interface IP address ACL. |
| 1.3.6.1.4.1.3320.101.6.1.1.18 | ColumnfiberProtectHandInHand | read-write | mandatory | Fiber protect hand in hand. 1-enable,2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.1.1.19 | ColumnfiberProtectGroup | read-write | mandatory | Fiber protect group. The range of groupID is 0-32. 0 means disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.1.1.20 | ColumnsplittingRatio | read-only | mandatory | Fiber splits ratio, for each OLT PON port, which means the max number of ONU. |
| 1.3.6.1.4.1.3320.101.6.1.1.21 | ColumnactiveOnuNum | read-only | mandatory | Currnet active ONU number. |
| 1.3.6.1.4.1.3320.101.6.1.1.22 | ColumninactiveOnuNum | read-only | mandatory | Currnet inactive ONU number. |
| 1.3.6.1.4.1.3320.101.6.1.1.23 | ColumnllidIfindexString | read-only | mandatory | Llid ports ifindex string. Seperated with comma. |
| 1.3.6.1.4.1.3320.101.6.2 | TableponOpticsParameterAlarmSetTable | not-accessible | mandatory | A list of epon olt pon optics Parameter Alarm set table entries. |
| 1.3.6.1.4.1.3320.101.6.2.1 | RowponOpticsParameterAlarmSetEntry | not-accessible | mandatory | A collection of additional objects in the epon olt pon optics Parameter Alarm set table. |
| 1.3.6.1.4.1.3320.101.6.2.1.1 | ColumnifIndex | read-only | mandatory | The only diid of PON port in System. |
| 1.3.6.1.4.1.3320.101.6.2.1.2 | ColumntxPowerAlarmUpLimitEnable | read-write | mandatory | Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.3 | ColumntxPowerAlarmUpLimitThreshold | read-write | mandatory | The upper threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is 82. |
| 1.3.6.1.4.1.3320.101.6.2.1.4 | ColumntxPowerAlarmUpLimitClearThreshold | read-write | mandatory | The upper threshold of tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is 82. |
| 1.3.6.1.4.1.3320.101.6.2.1.5 | ColumntxPowerAlarmLowLimitEnable | read-write | mandatory | Enable or disable the alarm of PON low TX power. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.6 | ColumntxPowerAlarmLowLimitThreshold | read-write | mandatory | The low threshold of tx power alarm. The unit is 0.1DBm. The range is -400-82. Default is -400. |
| 1.3.6.1.4.1.3320.101.6.2.1.7 | ColumntxPowerAlarmLowLimitClearThreshold | read-write | mandatory | The low threshold tx power alarm cleared. The unit is 0.1DBm. The range is -400-82. Default is -400. |
| 1.3.6.1.4.1.3320.101.6.2.1.8 | ColumntemperatureAlarmUpLimitEnable | read-write | mandatory | Enable or disable the alarm of PON high temperature. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.9 | ColumntemperatureAlarmUpLimitThreshold | read-write | mandatory | The upper threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is 1280. |
| 1.3.6.1.4.1.3320.101.6.2.1.10 | ColumntemperatureAlarmUpLimitClearThreshold | read-write | mandatory | The upper threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is 1280. |
| 1.3.6.1.4.1.3320.101.6.2.1.11 | ColumntemperatureAlarmLowLimitEnable | read-write | mandatory | Enable or disable the alarm of PON low temperature. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.12 | ColumntemperatureAlarmLowLimitThreshold | read-write | mandatory | The low threshold of temperature alarm. The unit is 0.1 degree. The range is -1280-1280. Default is -1280. |
| 1.3.6.1.4.1.3320.101.6.2.1.13 | ColumntemperatureAlarmLowLimitClearThreshold | read-write | mandatory | The low threshold temperature alarm cleared. The unit is 0.1 degree. The range is -1280-1280. Default is -1280. |
| 1.3.6.1.4.1.3320.101.6.2.1.14 | ColumnvoltageAlarmUpLimitEnable | read-write | mandatory | Enable or disable the alarm of PON high voltage. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.15 | ColumnvoltageAlarmUpLimitThreshold | read-write | mandatory | The upper threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 65. |
| 1.3.6.1.4.1.3320.101.6.2.1.16 | ColumnvoltageAlarmUpLimitClearThreshold | read-write | mandatory | The upper threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 65. |
| 1.3.6.1.4.1.3320.101.6.2.1.17 | ColumnvoltageAlarmLowLimitEnable | read-write | mandatory | Enable or disable the alarm of PON low voltage. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.18 | ColumnvoltageAlarmLowLimitThreshold | read-write | mandatory | The low threshold of voltage alarm. The unit is 0.1V. The range is 0-65. Default is 0. |
| 1.3.6.1.4.1.3320.101.6.2.1.19 | ColumnvoltageAlarmLowLimitClearThreshold | read-write | mandatory | The low threshold voltage alarm cleared. The unit is 0.1V. The range is 0-65. Default is 0. |
| 1.3.6.1.4.1.3320.101.6.2.1.20 | ColumncurrentAlarmUpLimitEnable | read-write | mandatory | Enable or disable the alarm of PON high current. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.21 | ColumncurrentAlarmUpLimitThreshold | read-write | mandatory | The upper threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 1310. |
| 1.3.6.1.4.1.3320.101.6.2.1.22 | ColumncurrentAlarmUpLimitClearThreshold | read-write | mandatory | The upper threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 1310. |
| 1.3.6.1.4.1.3320.101.6.2.1.23 | ColumncurrentAlarmLowLimitEnable | read-write | mandatory | Enable or disable the alarm of PON hign TX power. 1-enable, 2-disable. Default is disable. |
| 1.3.6.1.4.1.3320.101.6.2.1.24 | ColumncurrentAlarmLowLimitThreshold | read-write | mandatory | The low threshold of current alarm. The unit is 0.1mA. The range is 0-1310. Default is 0. |
| 1.3.6.1.4.1.3320.101.6.2.1.25 | ColumncurrentAlarmLowLimitClearThreshold | read-write | mandatory | The low threshold current alarm cleared. The unit is 0.1mA. The range is 0-1310. Default is 0. |
| 1.3.6.1.4.1.3320.101.6.3 | NodeponSfpParameterAlarmsNotifications | |||
| 1.3.6.1.4.1.3320.101.6.3.1 | ScalaralarmStatus | not-accessible | mandatory | Alarm status definition. 1-above, 2-below, 3-normal. |
| 1.3.6.1.4.1.3320.101.6.3.2 | NotificationponSfpParameterAlarmsNotification | current | The agent generates this trap when olt optical module works in abnormal status or return to normal . | |
| 1.3.6.1.4.1.3320.101.6.4 | NodeponPortMigration | |||
| 1.3.6.1.4.1.3320.101.6.4.1 | ScalarponPortMigLlidSet | write-only | mandatory | Llid ports ifindex string. Seperated with semicolon. For example, if we migrate the PON port configuration from port EPON3/1(llid:25) to port EPON3/2(llid:26),… |