NMS-EPON-ONU-SERIAL-PORT
20 objects
No module-level DESCRIPTION found.
Imported Objects
| NMS-SMI | nmsEPONGroup |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3320.101.27 | NodenmsEponOnuSerialPort | |||
| 1.3.6.1.4.1.3320.101.27.1 | TablenmsEponOnuSerialPortTable | not-accessible | mandatory | A list of epon ONU serial port table entries. |
| 1.3.6.1.4.1.3320.101.27.1.1 | RownmsEponOnuSerialPortEntry | not-accessible | mandatory | A collection of additional objects in the epon ONU serial port table. |
| 1.3.6.1.4.1.3320.101.27.1.1.1 | ColumnllidIfIndex | read-only | mandatory | LLID interface id, unique in system. The same value as NMS-EPON-LLID mib index. |
| 1.3.6.1.4.1.3320.101.27.1.1.2 | ColumnonuSerialPortSeqNo | read-only | mandatory | ONU serial port sequence number, unique in one ONU. |
| 1.3.6.1.4.1.3320.101.27.1.1.3 | ColumnonuSerialPortSpeed | read-write | mandatory | ONU serial port speed. Default value is 9600. |
| 1.3.6.1.4.1.3320.101.27.1.1.4 | ColumnonuSerialPortDataBits | read-write | mandatory | ONU serial port data bits. Default value is 8. |
| 1.3.6.1.4.1.3320.101.27.1.1.5 | ColumnonuSerialPortHaltBits | read-write | mandatory | ONU serial port halt bits. Default value is 1. |
| 1.3.6.1.4.1.3320.101.27.1.1.6 | ColumnonuSerialPortParity | read-write | mandatory | ONU serial port parity. Default value is 0-none. |
| 1.3.6.1.4.1.3320.101.27.1.1.7 | ColumnonuSerialPortFlowControl | read-write | mandatory | ONU serial port parity. Default value is 0-none. |
| 1.3.6.1.4.1.3320.101.27.1.1.8 | ColumnonuSerialPortPropRowStatus | read-create | mandatory | ONU serial port properties row status.These five item are set together: onuSerialPortSpeed, onuSerialPortDataBits, onuSerialPortHaltBits, onuSerialPortParity, … |
| 1.3.6.1.4.1.3320.101.27.1.1.9 | ColumnonuSerialPortDataReadInterval | read-write | mandatory | ONU serial port buffer data read interval. Unit is mili-second, and default value is 100 ms. |
| 1.3.6.1.4.1.3320.101.27.1.1.10 | ColumnonuSerialPortDataReadBytes | read-write | mandatory | ONU serial port buffer data read bytes. When storage is up to limit, the bytes must be sent out. Default value is 100. |
| 1.3.6.1.4.1.3320.101.27.1.1.11 | ColumnonuSerialPortBufferRowStatus | read-create | mandatory | ONU serial port buffer setting row status.These two item are set together: onuSerialPortDataReadInterval, onuSerialPortDataReadBytes. |
| 1.3.6.1.4.1.3320.101.27.1.1.12 | ColumnonuSerialPortKeepaliveMode | read-write | mandatory | ONU serial port keepalive mode. 0-disable, 1-enable. |
| 1.3.6.1.4.1.3320.101.27.1.1.13 | ColumnonuSerialPortKeepaliveIdle | read-write | mandatory | ONU serial port keepalive idle. if there is no r/x package in time of onuSerialPortKeepaliveIdle, system will send keepalive package to probe. Unit is second, … |
| 1.3.6.1.4.1.3320.101.27.1.1.14 | ColumnonuSerialPortKeepaliveTimeout | read-write | mandatory | ONU serial port keepalive timeout. if there is no r/x package in time of onuSerialPortKeepaliveIdle, system will send keepalive package to probe. And if there … |
| 1.3.6.1.4.1.3320.101.27.1.1.15 | ColumnonuSerialPortKeepaliveProbeCount | read-write | mandatory | ONU serial port keepalive probing package sending count. Default value is 3. |
| 1.3.6.1.4.1.3320.101.27.1.1.16 | ColumnonuSerialPortKeepaliveRowStatus | read-create | mandatory | ONU serial port keepalive setting value row status. These three items are set together: onuSerialPortKeepaliveIdle, onuSerialPortKeepaliveTimeout, onuSerialPor… |
| 1.3.6.1.4.1.3320.101.27.1.1.17 | ColumnonuSerialPortLoopback | read-write | mandatory | ONU serial port loopback test. |