NMS-HAL-GLOBAL-MIB
23 objects
No module-level DESCRIPTION found.
Imported Objects
| NMS-SWITCH-MIB | switchSystem |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress |
| RFC1213-MIB | DisplayString ifIndex PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3320.9.1.1.1.1 | NodeswitchHALGlobal | |||
| 1.3.6.1.4.1.3320.9.1.1.1.1.1 | ScalareapsLinkScanInterval | read-write | mandatory | Scan interval of port link status for EAPS. The range is from 10ms to 1000ms. Unit is 1ms. For IESwitch, default value is 10ms. For others, default value is 10… |
| 1.3.6.1.4.1.3320.9.1.1.1.1.2 | ScalarsystemMTU | read-write | mandatory | System MTU. Unit is 1byte. Default value is 1510bytes. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.3 | ScalarshareLoad | read-write | mandatory | Share way of fabric bandwidth. Only valid for 85. 1 for single MCU data chanel and 2 for multishare MCU data chanel. Default is single. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.4 | ScalarshareLoadBalance | read-write | mandatory | The balance way for HiG channel. Only valid for 85. 1 for default, 2 for both-mac, 3 for both-ip, 4 for dest-mac, 5 for dest-ip, 6 for src-mac, 7 for src-ip, 8… |
| 1.3.6.1.4.1.3320.9.1.1.1.1.5 | ScalarerrorFrameThreshold | read-write | mandatory | The threshold of error frame alarm. The range is for 1 - 1000000. Unit is packet. Default is 10 packets. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.6 | ScalarerrorFramePeriod | read-write | mandatory | The period of error frame sampling. The range is for 1 - 3600. Unit is second. Default is 10S. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.7 | ScalararpPriority | read-write | mandatory | The ARP packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.8 | ScalarbgpPriority | read-write | mandatory | The BGP packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.9 | ScalarbpduPriority | read-write | mandatory | The BPDU packet priority to host CPU. The range is 0-7. Default is 3. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.10 | ScalardhcpPriority | read-write | mandatory | The DHCP packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.11 | ScalarigmpPriority | read-write | mandatory | The IGMP packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.12 | ScalarreservedIPMCPriority | read-write | mandatory | The ReservedIPMC packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.13 | ScalarlookupFailPriority | read-write | mandatory | The look up failed packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.14 | ScalarprotoExecPriority | read-write | mandatory | The TTL=1 packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.15 | ScalardefaultPriority | read-write | mandatory | The default packet priority to host CPU. The range is 0-7. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.16 | ScalarcpuPortThreshold | read-write | mandatory | The rate limitation of cpu port. Unit is 64kbps. The range is 1-1562. 0 means disable. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.17 | Scalarl2TblHashAlgo | read-write | mandatory | The hash algorithm of MAC address table. The range is 1-5. 1 means CRC32 upper,2 means CRC32 lower, 3 means LSB,4 means CRC16 lower,5 means CRC16 upper. Defaul… |
| 1.3.6.1.4.1.3320.9.1.1.1.1.18 | ScalarcutThrough | read-write | mandatory | The cut-through of switching function. The range is disable/enable. 0 means disable��1 means enable. Default is 0. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.19 | ScalarclearMib | read-write | mandatory | The clear mib of switching function. The range is 0 - max port diid. 0 means clear mib global. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.20 | ScalarQtgModeNum | read-write | mandatory | select one of the four qtgport num to be set or get.The range of QtgPortNum is 1 - 4. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.21 | ScalarQtgModeMode | read-write | mandatory | set or get 40ge port mode.the range of mode is 0-1,0 means 40ge mode,1 means 4*10ge mode. |
| 1.3.6.1.4.1.3320.9.1.1.1.1.22 | ScalarQtgModeWrite | read-write | mandatory | write QtgModeSet config.1 means write |