NMS-IF-MIB
48 objects
Analog Voice Interface MIB module. This MIB manages the E&M, FXO, FXS Interfaces in the router.
Imported Objects
| NMS-SMI | nmsMgmt |
| RFC1155-SMI | Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3320.9.63 | IdentitynmsIfMIB | Analog Voice Interface MIB module. This MIB manages the E&M, FXO, FXS Interfaces in the router. | ||
| 1.3.6.1.4.1.3320.9.63.1 | NodenmsIfObjects | |||
| 1.3.6.1.4.1.3320.9.63.1.1 | TablevifTable | not-accessible | mandatory | A list of voice interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3320.9.63.1.1.1 | RowvifEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.9.63.1.1.1.1 | ColumnvifIndex | read-only | mandatory | A unique value for each voice interface. Its value ranges between 1 and the value of vifNumber. The value for each voice interface must remain constant at leas… |
| 1.3.6.1.4.1.3320.9.63.1.1.1.2 | ColumnvifDescr | read-only | mandatory | A textual string containing information about the voice interface. This string should include the name of the manufacturer, the product name and the version of… |
| 1.3.6.1.4.1.3320.9.63.1.1.1.3 | ColumnvifType | read-only | mandatory | The type of Voice interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.3320.9.63.1.1.1.4 | ColumnvifMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on the voice interface, specified in octets. in fact,for voice interface,this value should be 0 |
| 1.3.6.1.4.1.3320.9.63.1.1.1.5 | ColumnvifSpeed | read-only | mandatory | contains a zero value. |
| 1.3.6.1.4.1.3320.9.63.1.1.1.6 | ColumnvifPhysAddress | read-only | mandatory | contains an octet string of zero length. |
| 1.3.6.1.4.1.3320.9.63.1.1.1.7 | ColumnvifAdminStatus | read-write | mandatory | The desired administrative status of the Analog Telephony interface port. |
| 1.3.6.1.4.1.3320.9.63.1.1.1.8 | ColumnvifOperStatus | read-only | mandatory | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.3320.9.63.1.1.1.9 | ColumnvifLastChange | read-only | mandatory | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.4.1.3320.9.63.1.2 | TableifStormControlTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3320.9.63.1.2.1 | RowifStormControlEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.9.63.1.2.1.1 | ColumnifIndex | read-only | mandatory | A unique value for each voice interface. Its value ranges between 1 and the value of vifNumber. The value for each voice interface must remain constant at leas… |
| 1.3.6.1.4.1.3320.9.63.1.2.1.2 | ColumnifStormControlBroadcast | read-write | mandatory | Interface Storm Control Broadcast, range is 10-1000000kbps |
| 1.3.6.1.4.1.3320.9.63.1.2.1.3 | ColumnifStormControlMulticast | read-write | mandatory | Interface Storm Control Multicast, range is 10-1000000kbps |
| 1.3.6.1.4.1.3320.9.63.1.2.1.4 | ColumnifStormControlUnicast | read-write | mandatory | Interface Storm Control Unicast, range is 10-1000000kbps |
| 1.3.6.1.4.1.3320.9.63.1.7 | TableifSfpParameterTable | not-accessible | mandatory | A list of sfp property table entries. |
| 1.3.6.1.4.1.3320.9.63.1.7.1 | RowifSfpParameterEntry | not-accessible | mandatory | A collection of additional objects in the sfp property table. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.1 | ColumnifSfpIndex | read-only | mandatory | The only diid of port in System. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.2 | ColumntxPower1 | read-only | mandatory | The tx power 1 of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.3 | ColumnrxPower1 | read-only | mandatory | The rx power 1 of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.4 | Columntemperature | read-only | mandatory | Sfp module temperature. The unit is 1/256 degree. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.5 | Columnvlotage | read-only | mandatory | Sfp module volt. The unit is 0.1mV. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.6 | Columncurr1 | read-only | mandatory | Sfp module bias current 1. The unit is 2uA. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.7 | Columnvendname | read-only | mandatory | Sfp module vend name. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.8 | ColumntxPower2 | read-only | mandatory | The tx 2 power of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.9 | ColumnrxPower2 | read-only | mandatory | The rx 2 power of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.10 | Columncurr2 | read-only | mandatory | Sfp module bias current 2. The unit is 2uA. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.11 | ColumntxPower3 | read-only | mandatory | The tx 3 power of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.12 | ColumnrxPower3 | read-only | mandatory | The rx 3 power of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.13 | Columncurr3 | read-only | mandatory | Sfp module bias current 3. The unit is 2uA. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.14 | ColumntxPower4 | read-only | mandatory | The tx 4 power of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.15 | ColumnrxPower4 | read-only | mandatory | The rx 4 power of optical module. The unit is 0.01DBm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.16 | Columncurr4 | read-only | mandatory | Sfp module bias current 4. The unit is 2uA. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.17 | Columntype | read-only | mandatory | Sfp module interface type. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.18 | ColumntransDist | read-only | mandatory | Sfp module interface transmission distance. Unit is meter. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.19 | ColumnwaveLen | read-only | mandatory | Sfp module interface wave length. Unit is nm. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.20 | ColumnsfpPresentStatus | read-only | mandatory | SFP status. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.21 | ColumnsfpLostStatus | read-only | mandatory | SFP status. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.22 | ColumnsfpMismatchStatus | read-only | mandatory | SFP status. |
| 1.3.6.1.4.1.3320.9.63.1.7.1.23 | ColumnsfpSeqNum | read-only | mandatory | SFP sequence number. |
| 1.3.6.1.4.1.3320.9.63.1.8 | TablecableDiagnoseTable | not-accessible | mandatory | A interface list of cable diagnose table entries. |
| 1.3.6.1.4.1.3320.9.63.1.8.1 | RowcableDiagnoseEntry | not-accessible | mandatory | A collection of cable diagnose objects in the interface table. |
| 1.3.6.1.4.1.3320.9.63.1.8.1.1 | ColumncableDiagIfIndex | read-only | mandatory | The only diid of port in System. |
| 1.3.6.1.4.1.3320.9.63.1.8.1.2 | ColumncableDiagnoseResult | read-only | mandatory | cable diagnoisis descpription. |