MIB Viewer

NMS-IF-THRESHOLD-MIB

66 objects
This MIB module defines the managed objects that support monitoring of thresholds on interfaces. Configuration and monitoring of the thresholds is done through threshold templates that can be assigned to any subset of interfaces on the network element. More than one threshold template can be assigned to a given interface. This MIB module should be used when it is desired to apply a common set of thresholds to a subset of the available interfaces. If a threshold is to be applied to only one interface, then the EVENT-MIB or the RMON-MIB may be used as simpler alternatives. If a threshold is to be applied to all available interfaces, then the EVENT-MIB may be used as a simpler alternative.
Imported Objects
IF-MIBifIndex InterfaceIndex
NMS-SMInmsMgmt
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.3320.9.218IdentitynmsIfThresholdMIBThis MIB module defines the managed objects that support monitoring of thresholds on interfaces. Configuration and monitoring of the thresholds is done through…
1.3.6.1.4.1.3320.9.218.1NodenmsIfThresholdMIBObjects
1.3.6.1.4.1.3320.9.218.1.1NodenmsifthTemplateGroup
1.3.6.1.4.1.3320.9.218.1.1.1ScalarnmsifthTemplateIndexNextread-onlycurrentThis object contains an appropriate value to be used for nmsifthTemplateIndex when creating entries in the nmsifthTemplateTable. The distinguished value 0 indi…
1.3.6.1.4.1.3320.9.218.1.1.2ScalarnmsifthTemplateLastChangeread-onlycurrentThis object specifies the value of sysUpTime at the last time there was either a change to any object in any entry in nmsifthTemplateTable, or an entry was cre…
1.3.6.1.4.1.3320.9.218.1.1.3TablenmsifthTemplateTablenot-accessiblecurrentThis table is used to create threshold templates. Each template includes one or more thresholds (defined in the nmsifthThresholdTable), and can be assigned to …
1.3.6.1.4.1.3320.9.218.1.1.3.1RownmsifthTemplateEntrynot-accessiblecurrentAn entry describing the general properties of a threshold template. The template is created using the nmsifthTemplateRowStatus object. Prior to creating an ent…
1.3.6.1.4.1.3320.9.218.1.1.3.1.1ColumnnmsifthTemplateIndexnot-accessiblecurrentAn arbitrary integer that uniquely identifies a threshold template. The value for each threshold template must remain constant at least from one re-initializat…
1.3.6.1.4.1.3320.9.218.1.1.3.1.2ColumnnmsifthTemplateNameread-createcurrentThis object specifies a unique name associated with the threshold template by the management client, and provides a non-volatile 'handle' for the template. The…
1.3.6.1.4.1.3320.9.218.1.1.3.1.3ColumnnmsifthTemplateNotifyHoldDownTyperead-createcurrentThis object specifies the method used to prevent an excess of notifications from being generated when operation fluctuates around a threshold level. The value …
1.3.6.1.4.1.3320.9.218.1.1.3.1.4ColumnnmsifthTemplateNotifyHoldDownTimeread-createcurrentThe minimum amount of time between successive nmsifthIfThresholdFired or nmsifthIfThresholdCleared notifications for a given interface and template. This objec…
1.3.6.1.4.1.3320.9.218.1.1.3.1.5ColumnnmsifthTemplateRowStatusread-createcurrentThis object is used to create and delete threshold templates. The values of nmsifthTemplateName and nmsifthTemplateNotifyHoldDownType must be provided before a…
1.3.6.1.4.1.3320.9.218.1.1.4ScalarnmsifthThresholdLastChangeread-onlycurrentThis object specifies the value of sysUpTime at the last time there was either a change to any object in any entry in nmsifthThresholdTable, or an entry was cr…
1.3.6.1.4.1.3320.9.218.1.1.5TablenmsifthThresholdTablenot-accessiblecurrentThis table specifies the interface thresholds used in each template.
1.3.6.1.4.1.3320.9.218.1.1.5.1RownmsifthThresholdEntrynot-accessiblecurrentAn entry specifying an interface threshold used in a threshold template. The entry is created using the nmsifthThresholdRowStatus object. The values of nmsifth…
1.3.6.1.4.1.3320.9.218.1.1.5.1.1ColumnnmsifthThresholdIndexnot-accessiblecurrentAn arbitrary integer that uniquely identifies a threshold in a threshold template. The value for each threshold must remain constant when the agent's network m…
1.3.6.1.4.1.3320.9.218.1.1.5.1.2ColumnnmsifthThresholdDescrread-createcurrentA description of the threshold's function and use. The description must not include carriage returns.
1.3.6.1.4.1.3320.9.218.1.1.5.1.3ColumnnmsifthThresholdObjectread-createcurrentThe object to be compared against the threshold values. The object must be defined in a table indexed only by ifIndex. All of the instance portion of the objec…
1.3.6.1.4.1.3320.9.218.1.1.5.1.4ColumnnmsifthThresholdSeverityread-createcurrentThis object specifies the severity associated with the condition when the threshold is exceeded.
1.3.6.1.4.1.3320.9.218.1.1.5.1.5ColumnnmsifthThresholdTyperead-createcurrentThe manner in which to compare nmsifthThresholdObject to nmsifthThresholdFiredValue and nmsifthThresholdClearedValue. The value 'absoluteValue' indicates that …
1.3.6.1.4.1.3320.9.218.1.1.5.1.6ColumnnmsifthThresholdDirectionread-createcurrentThis object indicates which direction of movement causes the threshold to fire. The value 'rising' indicates that the threshold is fired when the current sampl…
1.3.6.1.4.1.3320.9.218.1.1.5.1.7ColumnnmsifthThresholdFiredValueread-createcurrentA threshold value to check against the object identified in nmsifthThresholdObject. If the value of nmsifthThresholdDirection is 'rising', then the threshold i…
1.3.6.1.4.1.3320.9.218.1.1.5.1.8ColumnnmsifthThresholdClearedValueread-createcurrentA threshold value to check against the object identified in nmsifthThresholdObject. If the value of nmsifthThresholdDirection is 'rising', then the threshold i…
1.3.6.1.4.1.3320.9.218.1.1.5.1.9ColumnnmsifthThresholdSampleIntervalread-createcurrentThe number of milliseconds to wait between samples of the object identified in nmsifthThresholdObject. To encourage consistency in sampling, the interval is me…
1.3.6.1.4.1.3320.9.218.1.1.5.1.10ColumnnmsifthThresholdApsSwitchoverread-createcurrentThis object indicates whether automatic protection switching (APS) switchover should be triggered, if applicable, when the threshold is fired. The value of thi…
1.3.6.1.4.1.3320.9.218.1.1.5.1.11ColumnnmsifthThresholdRowStatusread-createcurrentThis object is used to create and delete thresholds in templates. A new entry can only be created when there is an active entry in the nmsifthTemplateTable wit…
1.3.6.1.4.1.3320.9.218.1.2NodenmsifthTemplateIfAssignGroup
1.3.6.1.4.1.3320.9.218.1.2.1ScalarnmsifthTemplateIfLastChangeread-onlycurrentThis object specifies the value of sysUpTime at the last time there was either a change to any object in any entry in nmsifthTemplateIfAssignTable, or an entry…
1.3.6.1.4.1.3320.9.218.1.2.2TablenmsifthTemplateIfAssignTablenot-accessiblecurrentThis table specifies the assignment of threshold templates to specific interfaces. Each threshold template may be assigned to multiple interfaces. Each interfa…
1.3.6.1.4.1.3320.9.218.1.2.2.1RownmsifthTemplateIfAssignEntrynot-accessiblecurrentAn entry describing the assignment of a particular threshold template to a particular interface. The entry is created using the nmsifthTemplateIfAssignRowStatu…
1.3.6.1.4.1.3320.9.218.1.2.2.1.1ColumnnmsifthTemplateIfAssignInterfacenot-accessiblecurrentThis object identifies an interface to which the template is assigned.
1.3.6.1.4.1.3320.9.218.1.2.2.1.2ColumnnmsifthTemplateIfAssignOperStatusread-onlycurrentThis object indicates whether the threshold template identified by nmsifthTemplateIndex is operational on the interface identified by nmsifthTemplateIfAssignIn…
1.3.6.1.4.1.3320.9.218.1.2.2.1.3ColumnnmsifthTemplateIfAssignRowStatusread-createcurrentThis object is used to create and delete entries in the table, assigning templates to interfaces and removing templates from interfaces, respectively. A new en…
1.3.6.1.4.1.3320.9.218.1.3NodenmsifthIfThresholdFiredGroup
1.3.6.1.4.1.3320.9.218.1.3.1ScalarnmsifthThresholdFiredNotifyEnableread-writecurrentThis object specifies the minimum severity threshold governing the generation of nmsifthIfThresholdFired and nmsifthIfThresholdCleared notifications. For examp…
1.3.6.1.4.1.3320.9.218.1.3.2ScalarnmsifthThresholdFiredLastChangeread-onlycurrentThis object specifies the value of sysUpTime at the last time there was either a change to any object in any entry in nmsifthIfThresholdFiredTable, or an entry…
1.3.6.1.4.1.3320.9.218.1.3.3TablenmsifthIfThresholdFiredTablenot-accessiblecurrentThis table indicates the interfaces that currently have threshold fired conditions.
1.3.6.1.4.1.3320.9.218.1.3.3.1RownmsifthIfThresholdFiredEntrynot-accessiblecurrentAn entry indicating an interface that currently has one or more threshold fired conditions based on one template.
1.3.6.1.4.1.3320.9.218.1.3.3.1.1ColumnnmsifthIfThresholdFiredTemplatenot-accessiblecurrentThis object specifies a template for which one or more of the thresholds are fired on this interface.
1.3.6.1.4.1.3320.9.218.1.3.3.1.2ColumnnmsifthIfThresholdsFiredread-onlycurrentThis object specifies those thresholds that are currently being exceeded on this interface. If a threshold is currently being exceeded (i.e., the threshold is …
1.3.6.1.4.1.3320.9.218.1.3.3.1.3ColumnnmsifthIfLastThresholdFiredread-onlycurrentThis object specifies the last threshold fired or cleared on the interface.
1.3.6.1.4.1.3320.9.218.1.3.3.1.4ColumnnmsifthIfThresholdFiredLstChangeread-onlycurrentThis object specifies the value of sysUpTime at the last time a threshold was fired or cleared on the interface.
1.3.6.1.4.1.3320.9.218.1.3.3.1.5ColumnnmsifthIfThresholdFiredLstSeverityread-onlycurrentThis object specifies the severity of the threshold that was last fired or cleared on the interface.
1.3.6.1.4.1.3320.9.218.1.3.3.1.6ColumnnmsifthIfThresholdFiredMaxSeverityread-onlycurrentThis object specifies the highest severity among the thresholds that are currently being exceeded on this interface.
1.3.6.1.4.1.3320.9.218.2NodenmsIfThresholdMIBNotifications
1.3.6.1.4.1.3320.9.218.2.0NodenmsifthMIBNotificationsPrefix
1.3.6.1.4.1.3320.9.218.2.0.1NotificationnmsifthIfThresholdFiredcurrentThe agent generates this notification when a threshold defined in a template is asserted on an interface. If a threshold is asserted for a given interface and …
1.3.6.1.4.1.3320.9.218.2.0.2NotificationnmsifthIfThresholdClearedcurrentThe agent generates this notification when a threshold, that has previously fired, is cleared on an interface. If a threshold is cleared for a given interface …
1.3.6.1.4.1.3320.9.218.2.0.3NotificationnmsifthTemplateIfStatusChangecurrentThe agent generates this notification when a template comes up or goes down on an interface to which it is assigned, i.e., when the value of nmsifthTemplateIfA…
1.3.6.1.4.1.3320.9.218.3NodenmsIfThresholdMIBConformance
1.3.6.1.4.1.3320.9.218.3.1NodenmsIfThresholdMIBCompliances
1.3.6.1.4.1.3320.9.218.3.1.1CompliancenmsIfThresholdMIBCompliancecurrentThe compliance statement for entities that implement the NMS Interface Threshold MIB.
1.3.6.1.4.1.3320.9.218.3.2NodenmsIfThresholdMIBGroups
1.3.6.1.4.1.3320.9.218.3.2.1GroupnmsIfThresholdTemplateGroupcurrentA collection of mandatory managed objects for configuration of threshold templates.
1.3.6.1.4.1.3320.9.218.3.2.2GroupnmsIfThresholdFiredGroupcurrentA collection of mandatory managed objects for monitoring interfaces where thresholds have been exceeded.
1.3.6.1.4.1.3320.9.218.3.2.3GroupnmsifthHoldDownTimerGroupcurrentA collection of managed objects for configuration of a timer-based mechanism for suppression of excess notifications in a short time interval.
1.3.6.1.4.1.3320.9.218.3.2.4GroupnmsifthHoldDownHysteresisGroupcurrentA collection of managed objects for configuration of threshold values used to assert that the threshold is no longer being exceeded. These objects are part of …
1.3.6.1.4.1.3320.9.218.3.2.5GroupnmsifthApsGroupcurrentA collection of managed objects for configuration of APS switchover triggers based on interface thresholds.
1.3.6.1.4.1.3320.9.218.3.2.6GroupnmsIfThresholdNotifsGroupcurrentA collection of notifications generated when an interface has a threshold fired or a threshold cleared condition.
1.3.6.1.4.1.3320.9.218.3.2.7GroupnmsifthTemplateIfNotifsGroupcurrentA collection of notifications related to the assignment of templates to interfaces.
Type Definitions
NameSyntaxStatusDescription
NMSifthTemplateIndexUnsigned32 (1..1000)currentAn arbitrary integer that uniquely identifies a threshold template. The value for each threshold template must remain constant at least from one re-initialization of the agent's network management system to the next re-…
NMSifthTemplateIndexOrZeroUnsigned32 (0..1000)currentA value of either '0' or a valid template index. The distinguished value '0' indicates no template or no unassigned template index values are available.
NMSifthThresholdIndexUnsigned32 (0..63)currentAn arbitrary integer that uniquely identifies a threshold within a threshold template. The value for each threshold must remain constant when the agent's network management system is rebooted or re-initialized.
NMSifthThresholdListOCTET STRING (SIZE(0..8))currentA list of thresholds defined in a given template, in which each bit represents one threshold. The bits in the first octet represent thresholds identified by nmsifthThresholdIndex values 0 through 7, inclusive. The bits …
NMSifthThresholdSeverityINTEGER { fail(1), degrade(2), info(3), other(4) }currentThe severity of the condition when the threshold is fired. A smaller enumerated integer value indicates that the threshold exceeded condition is more severe. The value 'fail' indicates a hard failure condition where no …
NMSifthThresholdSeverityOrZeroINTEGER (0..4)currentA value of either '0' or a valid threshold severity.