NMS-QOS-EXT-MIB
215 objects
No module-level DESCRIPTION found.
Imported Objects
| NMS-QOS-MIB | qos |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowStatus TestAndIncr TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3320.150.10 | TableifDefaultCoSTable | not-accessible | mandatory | A list of interface default CoS entries. |
| 1.3.6.1.4.1.3320.150.10.1 | RowifDefaultCoSEntry | not-accessible | mandatory | An interface Default CoS entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.10.1.1 | ColumnifDefaultCoSIndex | read-only | mandatory | Indexs of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.3320.150.10.1.2 | ColumndefaultCoS | read-write | mandatory | Port default cos value. The range is 0-7. 8 means deletion. |
| 1.3.6.1.4.1.3320.150.11 | TablepolicyMapGlobalAppTable | not-accessible | mandatory | A list of policy Map Global App entries. |
| 1.3.6.1.4.1.3320.150.11.1 | RowpolicyMapGlobalAppEntry | not-accessible | mandatory | An policy Map Global App entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.11.1.1 | ColumnpolicyMapGlobalAppName | read-write | mandatory | Indexs of policy map. The length is 1-20. |
| 1.3.6.1.4.1.3320.150.11.1.2 | Columndirection | read-write | mandatory | The direction policy map applied. 1 means ingress, and 2 means egress. |
| 1.3.6.1.4.1.3320.150.11.1.3 | Columnoperation | read-write | mandatory | Add or delete policy map. 1 means add, and 2 means delete. |
| 1.3.6.1.4.1.3320.150.12 | TabledscpMapTable | not-accessible | mandatory | A list of dscp Map entries. |
| 1.3.6.1.4.1.3320.150.12.1 | RowdscpMapEntry | not-accessible | mandatory | An dscp Map entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.12.1.1 | ColumndscpValueCurr | read-only | mandatory | Dscp value,as the index of dcspMapTable. |
| 1.3.6.1.4.1.3320.150.12.1.2 | ColumndscpValueModified | read-write | mandatory | Dscp value to modify. The range is 0-63. 64 means no modification. |
| 1.3.6.1.4.1.3320.150.12.1.3 | ColumncosValue | read-write | mandatory | Cos value to modify. The range is 0-7. 8 means no modification. |
| 1.3.6.1.4.1.3320.150.12.1.4 | ColumncngStatus | read-write | mandatory | Congestion status. 1-green, 2-yellow, 3-red. 0 means no congestion status. |
| 1.3.6.1.4.1.3320.150.13 | TableifQueueBandwidthTable | not-accessible | mandatory | A list of interface Queue Bandwidth entries. |
| 1.3.6.1.4.1.3320.150.13.1 | RowifQueueBandwidthEntry | not-accessible | mandatory | An interface Queue Bandwidth entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.13.1.1 | ColumnifQueueBandwidthIndex | read-only | mandatory | Indexs of interface. The same value as ifIndex in ifTable of RFC1213. |
| 1.3.6.1.4.1.3320.150.13.1.2 | ColumnqueueID | read-only | mandatory | Indexs of interface. Queue number. The range is 1-8. |
| 1.3.6.1.4.1.3320.150.13.1.3 | ColumnminBandwidth | read-write | mandatory | Min bandwidth. The unit is 64kbps. The range is different for different interface. Default is 0. |
| 1.3.6.1.4.1.3320.150.13.1.4 | ColumnmaxBandwidth | read-write | mandatory | Max bandwidth. The unit is 64kbps. The range is different for different interface. Default is 0. |
| 1.3.6.1.4.1.3320.150.13.1.5 | ColumnifQueueBandwidthRowStatus | read-write | mandatory | Row Status. |
| 1.3.6.1.4.1.3320.150.14 | TablepolicyMapTable | not-accessible | mandatory | A list of policy Map entries. |
| 1.3.6.1.4.1.3320.150.14.1 | RowpolicyMapEntry | not-accessible | mandatory | An interface policy Map entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.14.1.1 | ColumnpolicyMapName | read-only | mandatory | Indexs of policy map. The length is 1-20. |
| 1.3.6.1.4.1.3320.150.14.1.2 | ColumnpolicyMapRowStatus | read-create | mandatory | Row status. It used to add, delete, or modify policy map. |
| 1.3.6.1.4.1.3320.150.14.1.3 | ColumnpolicyDescription | read-write | mandatory | The description of policy map. The length is 1-32. |
| 1.3.6.1.4.1.3320.150.14.1.4 | ColumnclassifyIPV4AclDelete | read-write | mandatory | Match ip acl or not. 1 means to match ip acl, and 2 means not to match ip acl. |
| 1.3.6.1.4.1.3320.150.14.1.5 | ColumnclassifyIPV4AclName | read-write | mandatory | The name of ip acl to match. |
| 1.3.6.1.4.1.3320.150.14.1.6 | ColumnclassifyIPV6AclDelete | read-write | mandatory | Match ipv6 acl or not. 1 means to match ipv6 acl, and 2 means not to match ipv6 acl. |
| 1.3.6.1.4.1.3320.150.14.1.7 | ColumnclassifyIPV6AclName | read-write | mandatory | The name of ipv6 acl to match. |
| 1.3.6.1.4.1.3320.150.14.1.8 | ColumnclassifyMacAclDelete | read-write | mandatory | Match mac acl or not. 1 means to match mac acl, and 2 means not to match mac acl. |
| 1.3.6.1.4.1.3320.150.14.1.9 | ColumnclassifyMacAclName | read-write | mandatory | The name of mac acl to match. |
| 1.3.6.1.4.1.3320.150.14.1.10 | ColumnclassifyDscp | read-write | mandatory | The dscp value to match. The range is 0-63. 64 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.11 | ColumnclassifyVlanID | read-write | mandatory | The vlanID to match. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.12 | ColumnclassifyVlan2ID | read-write | mandatory | The vlan range to match. This value is upper limitation, and classifyVlanID is down limitation. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.13 | ColumnclassifyVlanMask | read-write | mandatory | The mask of vlan to match. This value is used with classifyVlanID. The range is 1-0xFFF. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.14 | ColumnclassifyIVlanID | read-write | mandatory | The inner vlanID to match. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.15 | ColumnclassifyIVlan2ID | read-write | mandatory | The inner vlan range to match. This value is upper limitation, and classifyIVlanID is down limitation. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.16 | ColumnclassifyIVlanMask | read-write | mandatory | The mask of inner vlan to match. This value is used with classifyIVlanID. The range is 1-0xFFF. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.17 | ColumnclassifyCos | read-write | mandatory | The cos value to match. The range is 0-7. 8 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.18 | ColumnclassifyICos | read-write | mandatory | The inner cos value to match. The range is 0-7. 8 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.19 | ColumnclassifyEtherType | read-write | mandatory | The ethernet type to match. The range is 0-0xFFFF. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.20 | ColumnclassifyArpRequest | read-write | mandatory | Match arp request. 1 means match, and 2 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.21 | ColumnclassifyArpReply | read-write | mandatory | Match arp reply. 1 means match, and 2 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.22 | ColumnclassifyAny | read-write | mandatory | Match any. 1 means match, and 2 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.23 | ColumnactionBandwidth | read-write | mandatory | Rate limitation. 0 means no rate limitation. |
| 1.3.6.1.4.1.3320.150.14.1.24 | ColumnactionCos | read-write | mandatory | Modify cos value. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.25 | ColumnactionICos | read-write | mandatory | Modify inner cos value. The range is 0-7.8 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.26 | ColumnactionQueueID | read-write | mandatory | The queueID frame in. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.27 | ColumnactionDscp | read-write | mandatory | Modify dscp value. The range is 0-63. 64 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.28 | ColumnactionTos | read-write | mandatory | Modify tos value. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.29 | ColumnactionVlanOperation | read-write | mandatory | The operation of tag. 1-not modify, 2-replace, 3-add, 4-delete. |
| 1.3.6.1.4.1.3320.150.14.1.30 | ColumnactionVlanID | read-write | mandatory | The vlanID to replace or add. The range is 1-4094. |
| 1.3.6.1.4.1.3320.150.14.1.31 | ColumnactionIVlanOperation | read-write | mandatory | The operation of inner tag. 1-not modify, 2-replace, 3-add, 4-delete. |
| 1.3.6.1.4.1.3320.150.14.1.32 | ColumnactionIVlanID | read-write | mandatory | The inner vlanID to replace or add. The range is 1-4094. |
| 1.3.6.1.4.1.3320.150.14.1.33 | ColumnactionRedirect | read-write | mandatory | The diID of interface frame send to. 0 means not to redirect. |
| 1.3.6.1.4.1.3320.150.14.1.34 | ColumnactionMirror | read-write | mandatory | SessionID of mirror. 0 means not to mirror. |
| 1.3.6.1.4.1.3320.150.14.1.35 | ColumnactionStatistics | read-write | mandatory | Flow statistics. 1 means to count the number of flow, and 2 means not to count the number of flow. |
| 1.3.6.1.4.1.3320.150.14.1.36 | ColumnactionDrop | read-write | mandatory | Drop packet. 1 means to drop the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.37 | ColumnactionForward | read-write | mandatory | Forward packet. 1 means to forward the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.38 | ColumnactionMacAddress | read-write | mandatory | The new destination mac address of frame to be modified. 0 means not to modify destination mac address. |
| 1.3.6.1.4.1.3320.150.14.1.39 | ColumnactionCir | read-write | mandatory | The commited information rate. 0 means no cir bandwidth. |
| 1.3.6.1.4.1.3320.150.14.1.40 | ColumnactionPir | read-write | mandatory | The peak information rate. 0 means no pir bandwidth. |
| 1.3.6.1.4.1.3320.150.14.1.41 | ColumnactionEir | read-write | mandatory | The excess information rate. 0 means no eir bandwidth. |
| 1.3.6.1.4.1.3320.150.14.1.42 | ColumnactionBc | read-write | mandatory | The commited burst size. 0 means no commited burst size. |
| 1.3.6.1.4.1.3320.150.14.1.43 | ColumnactionBe | read-write | mandatory | The excess information rate. 0 means no eir bandwidth. |
| 1.3.6.1.4.1.3320.150.14.1.44 | ColumnactionEbs | read-write | mandatory | The excess burst size. 0 means no excess burst size . |
| 1.3.6.1.4.1.3320.150.14.1.45 | ColumnactionCopyCos | read-write | mandatory | Copy inner cos to outer cos. 1 means copy, and 2 means no copy. |
| 1.3.6.1.4.1.3320.150.14.1.46 | ColumnactionCopyToCpu | read-write | mandatory | Copy packet to cpu.1 means to copy packet to cpu.2meas not to care about this acion. |
| 1.3.6.1.4.1.3320.150.14.1.47 | ColumnactionColorBlind | read-write | mandatory | Set color mode.1 means to set blind mode.2 means to set aware mode. |
| 1.3.6.1.4.1.3320.150.14.1.48 | ColumnactionGreenForwared | read-write | mandatory | Forward green packet. 1 means to forward green packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.49 | ColumnactionGreenQueue | read-write | mandatory | The queueID frame in for green packets. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.50 | ColumnactionGreenCos | read-write | mandatory | Modify cos value for green packets. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.51 | ColumnactionGreenDroppreference | read-write | mandatory | Modify packet color.1 means green.2 means yellow.3 means red.4 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.52 | ColumnactionGreenCopyToCpu | read-write | mandatory | Copy green packet to cpu.1 means to copy packet to cpu.2meas not to care about this acion. |
| 1.3.6.1.4.1.3320.150.14.1.53 | ColumnactionYellowDrop | read-write | mandatory | Drop yellow packet. 1 means to drop the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.54 | ColumnactionYellowForwared | read-write | mandatory | Forward yellow packet. 1 means to forward packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.55 | ColumnactionYellowQueue | read-write | mandatory | The queueID frame in for yellow packets. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.56 | ColumnactionYellowCos | read-write | mandatory | Modify cos value for yellow packets. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.57 | ColumnactionYellowDroppreference | read-write | mandatory | Modify packet color.1 means green.2 means yellow.3 means red.4 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.58 | ColumnactionYellowCopyToCpu | read-write | mandatory | Copy yellow packet to cpu.1 means to copy packet to cpu.2meas not to care about this acion. |
| 1.3.6.1.4.1.3320.150.14.1.59 | ColumnactionRedDrop | read-write | mandatory | Drop red packet. 1 means to drop the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.60 | ColumnactionRedForwared | read-write | mandatory | Forward red packet. 1 means to forward packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.61 | ColumnactionRedQueue | read-write | mandatory | The queueID frame in for red packets. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.62 | ColumnactionRedCos | read-write | mandatory | Modify cos value for red packets. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.63 | ColumnactionRedDroppreference | read-write | mandatory | Modify packet color.1 means green.2 means yellow.3 means red.4 means not to modify. |
| 1.3.6.1.4.1.3320.150.14.1.64 | ColumnactionRedCopyToCpu | read-write | mandatory | Copy red packet to cpu.1 means to copy packet to cpu.2meas not to care about this acion. |
| 1.3.6.1.4.1.3320.150.14.1.65 | ColumnactionCirDel | read-write | mandatory | Delete Cir actions.1 means to delete Cir actions. 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.14.1.66 | ColumnclassifyPrecedence | read-write | mandatory | The precedence to match. The range is 0-7. 8 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.67 | ColumnclassifyTos | read-write | mandatory | The tos to match. The range is 0-15. 16 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.68 | ColumnclassifyDiffserv | read-write | mandatory | The Diffserv to match. The range is 0-255. 256 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.69 | ColumnclassifyDstport | read-write | mandatory | The destination port to match. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.14.1.70 | ColumnactionRedirctPortAggregator | read-write | mandatory | The aggregrate group id frame send to. 0 means not to redirect. |
| 1.3.6.1.4.1.3320.150.15 | TablepolicyMapSlotAppTable | not-accessible | mandatory | A list of policy Map Slot App entry. |
| 1.3.6.1.4.1.3320.150.15.1 | RowpolicyMapSlotAppEntry | not-accessible | mandatory | An policy Map Slot App entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.15.1.1 | ColumnpolicyMapSlotAppName | read-write | mandatory | Indexs of policy map slot. The length is 1-20. |
| 1.3.6.1.4.1.3320.150.15.1.2 | ColumnpolicyMapSlotAppSlot | read-write | mandatory | SlotID of device. |
| 1.3.6.1.4.1.3320.150.15.1.3 | ColumnpolicyMapSlotAppDirection | read-write | mandatory | The direction policy map applied. 1 means ingress, and 2 means egress. |
| 1.3.6.1.4.1.3320.150.15.1.4 | ColumnpolicyMapSlotAppOper | read-write | mandatory | Add or delete policy map. 1 means add, and 2 means delete. |
| 1.3.6.1.4.1.3320.150.16 | TableqosSlotStatTable | not-accessible | mandatory | A list of qos Slot Stat entry. |
| 1.3.6.1.4.1.3320.150.16.1 | RowqosSlotStatEntry | not-accessible | mandatory | An qos Slot Stat entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.16.1.1 | ColumnqosSlotStatName | read-only | mandatory | Indexs of qos Slot Stat Name. The length is 1-20. |
| 1.3.6.1.4.1.3320.150.16.1.2 | ColumnqosSlotStatSlotNo | read-only | mandatory | SlotID of device. |
| 1.3.6.1.4.1.3320.150.16.1.3 | ColumnqosSlotInProfileCount | read-only | mandatory | Slot of in-profile count(bits). |
| 1.3.6.1.4.1.3320.150.16.1.4 | ColumnqosSlotOutProfileCount | read-only | mandatory | Slot of out-profile count(bits). |
| 1.3.6.1.4.1.3320.150.17 | TableqosIFStatTable | not-accessible | mandatory | A list of qos interface Stat entry. |
| 1.3.6.1.4.1.3320.150.17.1 | RowqosIFStatEntry | not-accessible | mandatory | An qos interface Stat entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.17.1.1 | ColumnqosIFStatName | read-only | mandatory | Indexs of qos interface Stat Name. The length is 1-20. |
| 1.3.6.1.4.1.3320.150.17.1.2 | ColumnqosIFStatInterfaceNo | read-only | mandatory | interface NAME of device. |
| 1.3.6.1.4.1.3320.150.17.1.3 | ColumnqosIFInProfileCount | read-only | mandatory | Interface of in-profile count(bits). |
| 1.3.6.1.4.1.3320.150.17.1.4 | ColumnqosIFOutProfileCount | read-only | mandatory | Interface of out-profile count(bits). |
| 1.3.6.1.4.1.3320.150.18 | ScalarqosTrust | read-write | mandatory | Qos trust mode.1-dscp,2-cos,3-untrust.Default is cos. |
| 1.3.6.1.4.1.3320.150.19 | TablecosToLocalTable | not-accessible | mandatory | A list of qos to local mapping table entry. |
| 1.3.6.1.4.1.3320.150.19.1 | RowcosToLocalEntry | not-accessible | mandatory | An cos to local mapping table entry. |
| 1.3.6.1.4.1.3320.150.19.1.1 | Columncos | read-only | mandatory | Cos value. The range is 0-7. it is index of table. |
| 1.3.6.1.4.1.3320.150.19.1.2 | ColumncosToLocal | read-write | mandatory | Cos value to local. The range is 0-7. it is index of table. |
| 1.3.6.1.4.1.3320.150.19.1.3 | Columncng | read-write | mandatory | Congestion status. 1-green, 2-yellow, 3-red. 0 means no congestion status. |
| 1.3.6.1.4.1.3320.150.20 | TablepolicyMapSeqTable | not-accessible | mandatory | A list of policy Map Sequence entries. |
| 1.3.6.1.4.1.3320.150.20.1 | RowpolicyMapSeqEntry | not-accessible | mandatory | An interface policy Map Sequence entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.20.1.1 | ColumnpolicyMapSeqName | read-only | mandatory | Indexs of policy map. The length is 1-20. |
| 1.3.6.1.4.1.3320.150.20.1.2 | ColumnpolicyMapSeqNumber | read-only | mandatory | Indexs of policy map sequence. The range is 1-20. |
| 1.3.6.1.4.1.3320.150.20.1.3 | ColumnpolicyMapSeqRowStatus | read-create | mandatory | Row status. It used to add, delete, or modify policy map sequence. |
| 1.3.6.1.4.1.3320.150.20.1.4 | ColumnclassifySeqIPV4AclDelete | read-write | mandatory | Match ip acl or not in sequence. 1 means to match ip acl, and 2 means not to match ip acl. |
| 1.3.6.1.4.1.3320.150.20.1.5 | ColumnclassifySeqIPV4AclName | read-write | mandatory | The name of ip acl to match in sequence. |
| 1.3.6.1.4.1.3320.150.20.1.6 | ColumnclassifySeqIPV6AclDelete | read-write | mandatory | Match ipv6 acl or not in sequence. 1 means to match ipv6 acl, and 2 means not to match ipv6 acl. |
| 1.3.6.1.4.1.3320.150.20.1.7 | ColumnclassifySeqIPV6AclName | read-write | mandatory | The name of ipv6 acl to match in sequence. |
| 1.3.6.1.4.1.3320.150.20.1.8 | ColumnclassifySeqMacAclDelete | read-write | mandatory | Match mac acl or not in sequence. 1 means to match mac acl, and 2 means not to match mac acl. |
| 1.3.6.1.4.1.3320.150.20.1.9 | ColumnclassifySeqMacAclName | read-write | mandatory | The name of mac acl to match in sequence. |
| 1.3.6.1.4.1.3320.150.20.1.10 | ColumnclassifySeqDscp | read-write | mandatory | The dscp value to match in sequence. The range is 0-63. 64 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.11 | ColumnclassifySeqVlanID | read-write | mandatory | The vlanID to match in sequence. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.12 | ColumnclassifySeqVlan2ID | read-write | mandatory | The vlan range to match in sequence. This value is upper limitation, and classifyVlanID is down limitation. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.13 | ColumnclassifySeqVlanMask | read-write | mandatory | The mask of vlan to match in sequence. This value is used with classifyVlanID. The range is 1-0xFFF. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.14 | ColumnclassifySeqIVlanID | read-write | mandatory | The inner vlanID to match in sequence. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.15 | ColumnclassifySeqIVlan2ID | read-write | mandatory | The inner vlan range to match in sequence. This value is upper limitation, and classifyIVlanID is down limitation. The range is 1-4094. 4095 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.16 | ColumnclassifySeqIVlanMask | read-write | mandatory | The mask of inner vlan to match in sequence. This value is used with classifyIVlanID. The range is 1-0xFFF. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.17 | ColumnclassifySeqCos | read-write | mandatory | The cos value to match in sequence. The range is 0-7. 8 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.18 | ColumnclassifySeqICos | read-write | mandatory | The inner cos value to match in sequence. The range is 0-7. 8 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.19 | ColumnclassifySeqEtherType | read-write | mandatory | The ethernet type to match in sequence. The range is 0-0xFFFF. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.20 | ColumnclassifySeqArpRequest | read-write | mandatory | Match arp request in sequence. 1 means match, and 2 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.21 | ColumnclassifySeqArpReply | read-write | mandatory | Match arp reply in sequence. 1 means match, and 2 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.22 | ColumnclassifySeqAny | read-write | mandatory | Match any in sequence. 1 means match, and 2 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.23 | ColumnactionSeqBandwidth | read-write | mandatory | Rate limitation in sequence. 0 means no rate limitation. |
| 1.3.6.1.4.1.3320.150.20.1.24 | ColumnactionSeqCos | read-write | mandatory | Modify cos value in sequence. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.25 | ColumnactionSeqICos | read-write | mandatory | Modify inner cos value in sequence. The range is 0-7.8 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.26 | ColumnactionSeqQueueID | read-write | mandatory | The queueID frame in in sequence. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.27 | ColumnactionSeqDscp | read-write | mandatory | Modify dscp value in sequence. The range is 0-63. 64 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.28 | ColumnactionSeqTos | read-write | mandatory | Modify tos value in sequence. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.29 | ColumnactionSeqVlanOperation | read-write | mandatory | The operation of tag in sequence. 1-not modify, 2-replace, 3-add, 4-delete. |
| 1.3.6.1.4.1.3320.150.20.1.30 | ColumnactionSeqVlanID | read-write | mandatory | The vlanID to replace or add in sequence. The range is 1-4094. |
| 1.3.6.1.4.1.3320.150.20.1.31 | ColumnactionSeqIVlanOperation | read-write | mandatory | The operation of inner tag in sequence. 1-not modify, 2-replace, 3-add, 4-delete. |
| 1.3.6.1.4.1.3320.150.20.1.32 | ColumnactionSeqIVlanID | read-write | mandatory | The inner vlanID to replace or add in sequence. The range is 1-4094. |
| 1.3.6.1.4.1.3320.150.20.1.33 | ColumnactionSeqRedirect | read-write | mandatory | The diID of interface frame send to in sequence. 0 means not to redirect. |
| 1.3.6.1.4.1.3320.150.20.1.34 | ColumnactionSeqMirror | read-write | mandatory | SessionID of mirror in sequence. 0 means not to mirror. |
| 1.3.6.1.4.1.3320.150.20.1.35 | ColumnactionSeqStatistics | read-write | mandatory | Flow statistics in sequence. 1 means to count the number of flow, and 2 means not to count the number of flow. |
| 1.3.6.1.4.1.3320.150.20.1.36 | ColumnactionSeqDrop | read-write | mandatory | Drop packet in sequence. 1 means to drop the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.37 | ColumnactionSeqForward | read-write | mandatory | Forward packet in sequence. 1 means to forward the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.38 | ColumnactionSeqMacAddress | read-write | mandatory | The new destination mac address of frame to be modified in sequence. 0 means not to modify destination mac address. |
| 1.3.6.1.4.1.3320.150.20.1.39 | ColumnactionSeqCir | read-write | mandatory | The commited information rate in sequence. 0 means no cir bandwidth. |
| 1.3.6.1.4.1.3320.150.20.1.40 | ColumnactionSeqPir | read-write | mandatory | The peak information rate in sequence. 0 means no pir bandwidth. |
| 1.3.6.1.4.1.3320.150.20.1.41 | ColumnactionSeqEir | read-write | mandatory | The excess information rate in sequence. 0 means no eir bandwidth. |
| 1.3.6.1.4.1.3320.150.20.1.42 | ColumnactionSeqBc | read-write | mandatory | The commited burst size in sequence. 0 means no commited burst size. |
| 1.3.6.1.4.1.3320.150.20.1.43 | ColumnactionSeqBe | read-write | mandatory | The excess information rate in sequence. 0 means no eir bandwidth. |
| 1.3.6.1.4.1.3320.150.20.1.44 | ColumnactionSeqEbs | read-write | mandatory | The excess burst size in sequence. 0 means no excess burst size . |
| 1.3.6.1.4.1.3320.150.20.1.45 | ColumnactionSeqCopyCos | read-write | mandatory | Copy inner cos to outer cos in sequence. 1 means copy, and 2 means no copy. |
| 1.3.6.1.4.1.3320.150.20.1.46 | ColumnactionSeqCopyToCpu | read-write | mandatory | Copy packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.47 | ColumnactionSeqColorBlind | read-write | mandatory | Set color mode in sequence.1 means to set blind mode.2 means to set aware mode. |
| 1.3.6.1.4.1.3320.150.20.1.48 | ColumnactionSeqGreenForwared | read-write | mandatory | Forward green packet in sequence. 1 means to forward green packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.49 | ColumnactionSeqGreenQueue | read-write | mandatory | The queueID frame in for green packets in sequence. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.50 | ColumnactionSeqGreenCos | read-write | mandatory | Modify cos value for green packets in sequence. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.51 | ColumnactionSeqGreenDroppreference | read-write | mandatory | Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.52 | ColumnactionSeqGreenCopyToCpu | read-write | mandatory | Copy green packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.53 | ColumnactionSeqYellowDrop | read-write | mandatory | Drop yellow packet in sequence. 1 means to drop the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.54 | ColumnactionSeqYellowForwared | read-write | mandatory | Forward yellow packet in sequence. 1 means to forward packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.55 | ColumnactionSeqYellowQueue | read-write | mandatory | The queueID frame in for yellow packets in sequence. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.56 | ColumnactionSeqYellowCos | read-write | mandatory | Modify cos value for yellow packets in sequence. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.57 | ColumnactionSeqYellowDroppreference | read-write | mandatory | Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.58 | ColumnactionSeqYellowCopyToCpu | read-write | mandatory | Copy yellow packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.59 | ColumnactionSeqRedDrop | read-write | mandatory | Drop red packet in sequence. 1 means to drop the packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.60 | ColumnactionSeqRedForwared | read-write | mandatory | Forward red packet in sequence. 1 means to forward packet, and 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.61 | ColumnactionSeqRedQueue | read-write | mandatory | The queueID frame in for red packets in sequence. The range is 1-8. 9 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.62 | ColumnactionSeqRedCos | read-write | mandatory | Modify cos value for red packets in sequence. The range is 0-7. 8 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.63 | ColumnactionSeqRedDroppreference | read-write | mandatory | Modify packet color in sequence.1 means green.2 means yellow.3 means red.4 means not to modify. |
| 1.3.6.1.4.1.3320.150.20.1.64 | ColumnactionSeqRedCopyToCpu | read-write | mandatory | Copy red packet to cpu in sequence.1 means to copy packet to cpu.2meas not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.65 | ColumnactionSeqCirDel | read-write | mandatory | Delete Cir actions in sequence.1 means to delete Cir actions. 2 means not to care about this action. |
| 1.3.6.1.4.1.3320.150.20.1.66 | ColumnclassifySeqPrecedence | read-write | mandatory | The precedence to match in sequence. The range is 0-7. 8 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.67 | ColumnclassifySeqTos | read-write | mandatory | The tos to match in sequence. The range is 0-15. 16 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.68 | ColumnclassifySeqDiffserv | read-write | mandatory | The Diffserv to match in sequence. The range is 0-255. 256 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.69 | ColumnclassifySeqDstport | read-write | mandatory | The destination port to match in sequence. 0 means not to match. |
| 1.3.6.1.4.1.3320.150.20.1.70 | ColumnactionSeqRedirctPortAggregator | read-write | mandatory | The aggregrate group id frame send to in sequence. 0 means not to redirect. |
| 1.3.6.1.4.1.3320.150.21 | NodeportMirrorFlow | |||
| 1.3.6.1.4.1.3320.150.21.1 | TablecopPortMirrorTable | not-accessible | mandatory | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.3320.150.21.1.1 | RowcopPortMirrorEntry | not-accessible | mandatory | An interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.3320.150.21.1.1.1 | ColumncopNumber | read-only | mandatory | A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re… |
| 1.3.6.1.4.1.3320.150.21.1.1.2 | ColumncopRowStatus | read-create | mandatory | Row status. It is used to add or delete cop table. |
| 1.3.6.1.4.1.3320.150.21.1.1.3 | Columnenable | read-only | mandatory | Enable the mirror |
| 1.3.6.1.4.1.3320.150.21.1.1.4 | Columntimeout | read-write | mandatory | time of duration[1,600],Continuous(0). |
| 1.3.6.1.4.1.3320.150.21.1.1.5 | ColumnstartPort | read-write | mandatory | Source port, value is diid. If it is not match, that would be 0. |
| 1.3.6.1.4.1.3320.150.21.1.1.6 | Columnm_p_in | read-write | mandatory | Middle in-port , value is diid. If it is not match, that would be 0. |
| 1.3.6.1.4.1.3320.150.21.1.1.7 | Columnm_p_out | read-write | mandatory | Middle out-port, value is diid. If it is not match, that would be 0. |
| 1.3.6.1.4.1.3320.150.21.1.1.8 | ColumnendPort | read-write | mandatory | Destination port, value is diid. If it is not match, that would be 0. |
| 1.3.6.1.4.1.3320.150.21.1.1.9 | ColumnmonitorDirection | read-only | mandatory | Monitor direction. ingress would be 0 and egress would be 1. |
| 1.3.6.1.4.1.3320.150.21.1.1.10 | ColumnsrcMac | read-write | mandatory | Source MAC address that would be monitored. |
| 1.3.6.1.4.1.3320.150.21.1.1.11 | ColumnsrcMacMask | read-write | mandatory | Source MAC address mask that would be monitored. |
| 1.3.6.1.4.1.3320.150.21.1.1.12 | ColumndestMac | read-write | mandatory | Destination MAC address that would be monitored. |
| 1.3.6.1.4.1.3320.150.21.1.1.13 | ColumndestMacMask | read-write | mandatory | Destination MAC address mask that would be monitored. |
| 1.3.6.1.4.1.3320.150.21.1.1.14 | Columnvlan | read-write | mandatory | VLAN id. If it is not match, that would be 0. |
| 1.3.6.1.4.1.3320.150.21.1.1.15 | ColumnetherType | read-write | mandatory | Type of ethernet. Range is 0x0001~0xffff, and if it is not match that would be 0. |
| 1.3.6.1.4.1.3320.150.21.1.1.16 | ColumnsrcIp | read-write | mandatory | Source IP address . That would be 0.0.0.0 if it is not match. |
| 1.3.6.1.4.1.3320.150.21.1.1.17 | ColumnsrcIpMask | read-write | mandatory | Source IP address mask . That would be 0.0.0.0 if it is not match. |
| 1.3.6.1.4.1.3320.150.21.1.1.18 | ColumndestIp | read-write | mandatory | Destination IP address . That would be 0.0.0.0 if it is not match. |
| 1.3.6.1.4.1.3320.150.21.1.1.19 | ColumndestIpMask | read-write | mandatory | Destination IP address mask . That would be 0.0.0.0 if it is not match. |
| 1.3.6.1.4.1.3320.150.21.1.1.20 | Columnl4DestPort | read-write | mandatory | Destination port of monitoring package. That would be 0 if it is not match. |
| 1.3.6.1.4.1.3320.150.21.1.1.21 | Columnl4SrcPort | read-write | mandatory | Source port of monitoring package. That would be 0 if it is not match. |
| 1.3.6.1.4.1.3320.150.21.1.1.22 | Columnprotocol | read-write | mandatory | IP protocol number. That would be 0 if it is not match. |