NMS-VLAN-EXT-MIB
53 objects
No module-level DESCRIPTION found.
Imported Objects
| NMS-SMI | nmslocal nmsMgmt |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | VlanIndex |
| RFC1155-SMI | Counter IpAddress |
| RFC1213-MIB | DisplayString ifIndex PhysAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3320.9.182 | NodenmsvlanExt | |||
| 1.3.6.1.4.1.3320.9.182.1 | Scalardot1qVlanTransparentMode | read-write | mandatory | Vlan global transport mode.Not supported in S8500 series. |
| 1.3.6.1.4.1.3320.9.182.2 | Scalardot1qVlanUntagged | read-write | mandatory | Vlan global transport mode.Not supported in S8500 series. |
| 1.3.6.1.4.1.3320.9.182.3 | Tabledot1qPortVlanTable | not-accessible | mandatory | A table of dot1qVlan operation. |
| 1.3.6.1.4.1.3320.9.182.3.1 | Rowdot1qPortVlanTableEntry | not-accessible | mandatory | A collection of dot1qVlan operation. |
| 1.3.6.1.4.1.3320.9.182.3.1.1 | Columndot1qPvid | read-write | mandatory | The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. |
| 1.3.6.1.4.1.3320.9.182.3.1.2 | Columndot1qPortType | read-only | mandatory | value for port vlan type. |
| 1.3.6.1.4.1.3320.9.182.3.1.3 | Columndot1qPortSwitchingMode | read-write | mandatory | value for port vlan mode. |
| 1.3.6.1.4.1.3320.9.182.3.1.4 | Columndot1qPortAllowedVlans | read-write | mandatory | value for port allowed vlan list. |
| 1.3.6.1.4.1.3320.9.182.3.1.5 | Columndot1qPortUntaggedVlans | read-write | mandatory | value for port untagged vlan list. |
| 1.3.6.1.4.1.3320.9.182.3.1.6 | Columndot1qPortAcceptableFrameTypes | read-write | mandatory | When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames … |
| 1.3.6.1.4.1.3320.9.182.3.1.7 | Columndot1qPortIngressFiltering | read-write | mandatory | When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept al… |
| 1.3.6.1.4.1.3320.9.182.3.1.8 | Columndot1qPortGvrpStatus | read-write | mandatory | The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as dot1qGvrpStatus is also enabled for this… |
| 1.3.6.1.4.1.3320.9.182.3.1.9 | Columndot1qPortGvrpFailedRegistrations | read-only | mandatory | The total number of failed GVRP registrations, for any reason, on this port. |
| 1.3.6.1.4.1.3320.9.182.3.1.10 | Columndot1qPortGvrpLastPduOrigin | read-only | mandatory | The Source MAC Address of the last GVRP message received on this port. |
| 1.3.6.1.4.1.3320.9.182.3.1.11 | Columndot1qUplinkPortTpid | read-write | mandatory | Default value is 0x8100. Note: only when the value of 'dot1qPortSwitchingMode' is 'Dot1qTunnelUplink', this value is available. |
| 1.3.6.1.4.1.3320.9.182.4 | Tabledot1qPortVlanTranslateTable | not-accessible | mandatory | A table of dot1q Port Vlan Translate Table operation. |
| 1.3.6.1.4.1.3320.9.182.4.1 | Rowdot1qPortVlanTranslateTableEntry | not-accessible | mandatory | A collection of dot1qVlan Translate operation. Attention: When VLAN is created, dttTeMode,dttTeOldVlanId��dttTeNewVlanId should be provided, and dttTePri i… |
| 1.3.6.1.4.1.3320.9.182.4.1.2 | ColumndttTeOldVlanId | read-only | mandatory | value for port old vlan id to be translated. |
| 1.3.6.1.4.1.3320.9.182.4.1.3 | ColumndttTeNewVlanId | read-write | mandatory | value for port new vlan id to be translated. |
| 1.3.6.1.4.1.3320.9.182.4.1.4 | ColumndttTePri | read-write | mandatory | value for port new vlan id priority to be translated. |
| 1.3.6.1.4.1.3320.9.182.4.1.5 | ColumndttTeRowStatus | read-create | mandatory | value for port vlan translation row status. |
| 1.3.6.1.4.1.3320.9.182.5 | Scalardot1qTunnel | read-write | mandatory | Dot1qTunnel enable operation. enabled(1),disabled(2). Default value is disable. |
| 1.3.6.1.4.1.3320.9.182.6 | Tabledot1qVlanTable | not-accessible | mandatory | A table of dot1qVlan operation. |
| 1.3.6.1.4.1.3320.9.182.6.1 | Rowdot1qVlanTableEntry | not-accessible | mandatory | A collection of dot1qVlan operation. |
| 1.3.6.1.4.1.3320.9.182.6.1.1 | Columndot1qVlanTagged | read-write | mandatory | value for port allowed vlan list. |
| 1.3.6.1.4.1.3320.9.182.6.1.2 | Columndot1qVlanStaticRowStatus | read-create | mandatory | This object indicates the status of this entry. |
| 1.3.6.1.4.1.3320.9.182.9 | TableportDttConfigTable | not-accessible | mandatory | dot1q-translating-tunnel configuraton Table |
| 1.3.6.1.4.1.3320.9.182.9.1 | RowportDttConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.3320.9.182.9.1.1 | ColumndttStartVlanId | not-accessible | mandatory | The starting VLAN ID, working together with endVlanId, consists of a VLAN group. The VLAN ID match the VLAN group will be QinQed or flated with specified outer… |
| 1.3.6.1.4.1.3320.9.182.9.1.2 | ColumndttEndVlanId | not-accessible | mandatory | The ending VLAN ID, working together with startVlanId, consists of a VLAN range. The VLAN ID match the VLAN range will be QinQed or flated with specified outer… |
| 1.3.6.1.4.1.3320.9.182.9.1.3 | ColumndttSVlanId | read-create | mandatory | The outer VLAN id to be QinQed or flated |
| 1.3.6.1.4.1.3320.9.182.9.1.4 | ColumndttTeMode | read-write | mandatory | value for port vlan translation item mode. The default value is DttTeModeQinQ(2). |
| 1.3.6.1.4.1.3320.9.182.9.1.5 | ColumndttSTagCosNewValue | read-create | current | The new STAG COS value to be set |
| 1.3.6.1.4.1.3320.9.182.9.1.6 | ColumndttRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.3320.9.182.9.1.7 | ColumndttTeModeType | read-write | mandatory | value for port vlan translation item mode type. |
| 1.3.6.1.4.1.3320.9.182.10 | TableportDttMaskConfigTable | not-accessible | mandatory | dot1q-translating-tunnel configuraton Table of mask mode, configuration order: firist the dttMaskTesMode or dttMaskSTagCosNewValue, the dttMaskSVlanId must be … |
| 1.3.6.1.4.1.3320.9.182.10.1 | RowportDttMaskConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.3320.9.182.10.1.1 | ColumndttMaskStartVlanId | not-accessible | mandatory | The starting VLAN ID, working together with endVlanId, consists of a VLAN group. The VLAN ID match the VLAN group will be QinQed or flated with specified outer… |
| 1.3.6.1.4.1.3320.9.182.10.1.2 | ColumndttMaskEndVlanId | not-accessible | mandatory | The ending VLAN ID, working together with startVlanId, consists of a VLAN range. The VLAN ID match the VLAN range will be QinQed or flated with specified outer… |
| 1.3.6.1.4.1.3320.9.182.10.1.3 | ColumndttMaskSVlanId | read-create | mandatory | The outer VLAN id to be QinQed or flated |
| 1.3.6.1.4.1.3320.9.182.10.1.4 | ColumndttMaskTesMode | read-write | mandatory | value for port vlan translation item mode. The default value is DttTeModeQinQ(2). |
| 1.3.6.1.4.1.3320.9.182.10.1.5 | ColumndttMaskSTagCosNewValue | read-create | current | The new STAG COS value to be set |
| 1.3.6.1.4.1.3320.9.182.10.1.6 | ColumndttMaskRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.3320.9.182.11 | TableportDttRangeConfigTable | not-accessible | mandatory | dot1q-translating-tunnel configuraton Table of range mode, configuration order is the same as Mask |
| 1.3.6.1.4.1.3320.9.182.11.1 | RowportDttRangeConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.3320.9.182.11.1.1 | ColumndttRangeStartVlanId | not-accessible | mandatory | The starting VLAN ID, working together with endVlanId, consists of a VLAN group. The VLAN ID match the VLAN group will be QinQed or flated with specified outer… |
| 1.3.6.1.4.1.3320.9.182.11.1.2 | ColumndttRangeEndVlanId | not-accessible | mandatory | The ending VLAN ID, working together with startVlanId, consists of a VLAN range. The VLAN ID match the VLAN range will be QinQed or flated with specified outer… |
| 1.3.6.1.4.1.3320.9.182.11.1.3 | ColumndttRangeSVlanId | read-create | mandatory | The outer VLAN id to be QinQed or flated |
| 1.3.6.1.4.1.3320.9.182.11.1.4 | ColumndttRangeTesMode | read-write | mandatory | value for port vlan translation item mode. The default value is DttTeModeQinQ(2). |
| 1.3.6.1.4.1.3320.9.182.11.1.5 | ColumndttRangeSTagCosNewValue | read-create | current | The new STAG COS value to be set |
| 1.3.6.1.4.1.3320.9.182.11.1.6 | ColumndttRangeRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.3320.9.182.13 | Scalardot1qVlanBatchConfig | read-write | mandatory | vlan batch operation.. |