NORTEL-OME40G-FAC-MIB
113 objects
Optical Multiservice Edge (ome) This Module will be used to identify the facility attributes for Nortel OME6500 40G facilities
Imported Objects
| IF-MIB | ifIndex |
| NORTEL-OME40G-MIB | nnOme40G |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.68.11.3.1 | IdentitynnOme40GFacilities | Optical Multiservice Edge (ome) This Module will be used to identify the facility attributes for Nortel OME6500 40G facilities | ||
| 1.3.6.1.4.1.562.68.11.3.1.1 | NodennOCn | |||
| 1.3.6.1.4.1.562.68.11.3.1.1.1 | TablennOCnTable | not-accessible | current | Contains entries for OC192 and OC768 facilities |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1 | RownnOCnEntry | not-accessible | current | This entry shall contain all the necessary attributes for the OC768 and OC192 facilities in the 40G card |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.1 | ColumnocnRowStatus | read-write | current | This attribute is used to manage rows in the facility entry |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.2 | ColumnstFormat | read-write | current | Section trace format |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.3 | ColumnexpSTrc | read-write | current | Expected section trace |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.4 | ColumnstfMode | read-write | current | Section trace alarming mode |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.5 | ColumneBerTh | read-only | current | Excessive Bit rate threshold |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.6 | ColumnocnPortMode | read-write | current | Port mode can eithter be SONET or SDH |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.7 | ColumnocnLaserOffFarEndFail | read-write | current | It can either be Enabled or Disabled. |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.8 | ColumnoChTxActOcnPwr | read-only | current | Actual Optical Channel transmit power. This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT. |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.9 | ColumnoChTxMinOcnPwr | read-only | current | Minimum Optical Channel transmit power |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.10 | ColumnoChTxMaxOcnPwr | read-only | current | Maximum Optical Channel transmit power |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.11 | ColumnoChRxActOcnPwr | read-only | current | Actual Optical Channel receive power. This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT. |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.12 | ColumnoChRxMinOcnPwr | read-only | current | Minimum Optical Channel receive power. |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.13 | ColumnoChRxMaxOcnPwr | read-only | current | Maximum Optical Channel receive power. |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.14 | ColumnexpSectionTraceMsg | read-only | current | Expected section trace message. This variable contains data during GET operations only. GET-NEXT returns No Assigned Value |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.15 | ColumnincSectionTraceMsg | read-only | current | Incoming section trace message This variable contains data during GET operations only. GET-NEXT returns No Assigned Value |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.16 | ColumnocnLoopbackType | read-write | current | Nothing is returned if Loopback is not active; otherwise the facility is returned. |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.17 | ColumnocnPrimaryState | read-only | current | Primary State of the faciltiy. Can only be modified by changing the admin state. |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.18 | ColumnocnSecondaryState | read-only | current | Secondary state for the facility. A facility can have more than one secondary state as different combinations of the individual secondary state. It is represen… |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.19 | ColumnocnAdminState | read-write | current | This is a write-only variable. The user can restore or remove facilities using this command. You restore a facility by setting this variable to IS and remove i… |
| 1.3.6.1.4.1.562.68.11.3.1.1.1.1.20 | ColumnocnAID | read-only | current | Facility AID as received from TL1. This should include the FAC type, shelf id, slot, and port. |
| 1.3.6.1.4.1.562.68.11.3.1.2 | NodennOTMn | |||
| 1.3.6.1.4.1.562.68.11.3.1.2.1 | TablennOTMnTable | not-accessible | current | Contains entries for the OTM2/3 facilities |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1 | RownnOTMnEntry | not-accessible | current | An Entry for the OTM2/3 facilities |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.1 | ColumnotmRowStatus | read-write | current | Used to create/delete, put in service and out of service, and edit. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.2 | Columnosid | read-write | current | Optical Service ID |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.3 | ColumnotuTxFecFmt | read-write | current | OTU transmit FEC format |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.4 | ColumnotuRxFecFmt | read-write | current | OTU receive FEC format |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.5 | ColumnoduTerm | read-only | current | Indicates whether or not ODU TTI is terminated on this OTMn facility. Possible values are ODUTTITERM for OTM2 or ODUTERM for OTM3. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.6 | ColumnotuTxTTI | read-write | current | OTU transmit trail trace identifier. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.7 | ColumnoduTxTTI | read-write | current | ODU transmit trail trace identifier. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.8 | ColumnotuRxExpTTI | read-write | current | OTU receive trail trace identifier. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.9 | ColumnoduRxExpTTI | read-write | current | ODU receive trail trace identifer. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.10 | ColumntxPathId | read-write | current | Transmit path identifier |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.11 | ColumnoChTxPwr | read-write | current | Provisioned output power |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.12 | ColumnoChTxActOtmPwr | read-only | current | Actual optical channel transmit power. This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.13 | ColumnoChTxMinOtmPwr | read-only | current | Minimum transmit power. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.14 | ColumnoChTxMaxOtmPwr | read-only | current | Maximum transmit power. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.15 | ColumnoChRxActOtmPwr | read-only | current | Actual receive power This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.16 | ColumnoChRxMinOtmPwr | read-only | current | Minimum receive power |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.17 | ColumnoChRxMaxOtmPwr | read-only | current | Maximum receive power |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.18 | ColumnoChTxWvlngthProv | read-write | current | Provisioned transmit wavelength |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.19 | ColumnoChTxWvlngthMin | read-only | current | Minimum transmit wavelength |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.20 | ColumnoChTxWvlngthMax | read-only | current | Maximum Transmit wavelength |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.21 | ColumnoChTxWvlngthSpacing | read-only | current | Transmit wavelength spacing |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.22 | ColumnoChRxActDisp | read-only | current | Actual receive dispersion. Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is n… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.23 | ColumnoChRxActPmd | read-only | current | Actual receive polarization mode dispersion (PMD) This variable is available upon GET-EXACT operations. No value is returned with GET-NEXT. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.24 | ColumnoChRxPmdMax | read-only | current | Maximum receive PMD |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.25 | ColumnoChRxEchoTrace | read-only | current | Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the GET req… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.26 | ColumnoChTxTrace | read-only | current | Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the GET req… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.27 | ColumnoChTxAssocFarEndRx | read-only | current | Data for this variable is only available from the subtending card. This data is retrieved from the SP with GET-NEXT. When there is no real-hardware the GET req… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.28 | ColumnotmPortMode | read-write | current | |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.29 | ColumntfMode | read-write | current | Trace alarm mode |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.30 | ColumnoduTfMode | read-write | current | ODU trace alarm enable/disable |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.31 | ColumnotmLaserOffFarEndFail | read-write | current | Always enabled in Release 5.1 |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.32 | ColumnpreFecSigFailThreshLevel | read-write | current | Pre FEC Signal Fail Threshold Level |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.33 | ColumnotuSignalDegradeThreshLevel | read-only | current | OTU Signal Degrade Threshold Level |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.34 | ColumnoduMonitorEnabled | read-only | current | Beware of overloading ODUMONITOR in RTRV-TTI and RTRV-OTM3 |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.35 | ColumnlineRate | read-create | current | Line Rate to be specified at create time only. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.36 | ColumnotuExpTTI | read-only | current | Expected incoming OTU TTI message. This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.37 | ColumnotuRxIncTTI | read-only | current | Receive OTU TTI message This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the fac… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.38 | ColumnoduRxIncTTI | read-only | current | Receive ODU TTI message This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the fac… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.39 | ColumnoduMonitorMsg | read-only | current | ODU monitoring message This variable is not available during table view, walk, or any get-next operation. It only has data on specific GET requsets to the faci… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.40 | ColumnotmLoopbackType | read-write | current | Facility if loopback is active; otherwise, nothing is returned for this attribute |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.41 | Columnopu2reserved | read-only | current | YES/NO to using 7 overhead bytes for payload |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.42 | ColumnexpectedPayloadType | read-write | current | This is received as a HEX value from TL1. The ranges are 0..FF. Since HEX can not be represented in ASN.1, a string is used. For SET operations, the user can e… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.43 | ColumntransmittedPayloadType | read-write | current | This is received as a HEX value from TL1. The ranges are 0..FF. Since HEX can not be represented in ASN.1, a string is used. For SET operations, the user can e… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.44 | ColumnreceivedPayloadType | read-only | current | This is received as a HEX value from TL1. The ranges are 0..FF. Since HEX can not be represented in ASN.1, a string is used. This variable is available upon GE… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.45 | ColumnotmPrimaryState | read-only | current | Primary State of the faciltiy. Can only be modified by changing the admin state. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.46 | ColumnotmSecondaryState | read-only | current | Secondary state for the facility. A facility can have more than one secondary state as different combinations of the individual secondary state. It is represen… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.47 | ColumnotmAdminState | read-write | current | This is a write-only variable. The user can restore or remove facilities using this command. You restore a facility by setting this variable to IS and remove i… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.48 | ColumnotmAID | read-only | current | Facility AID as received from TL1. This should include the FAC type, shelf id, slot, and port. |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.49 | ColumnotmGCC | read-write | current | A Get operation on this variable retrieves the LLSDCC Carrier GCC value. Setting this variable to NONE removes OSPF circuit and LLSDCC carrier info. It is a NO… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.50 | ColumnospfCircuit | read-write | current | With GET operations, this variable shall return the configured parameters of the OSPF circuit. In this release only the NETAREA is supported. With SET operatio… |
| 1.3.6.1.4.1.562.68.11.3.1.2.1.1.51 | ColumnoChDifferentialEncoding | read-write | current | |
| 1.3.6.1.4.1.562.68.11.3.1.3 | NodennEth | |||
| 1.3.6.1.4.1.562.68.11.3.1.3.1 | TablennEthTable | not-accessible | current | Contains entries for ethernet 10G facilities |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1 | RownnEthEntry | not-accessible | current | This entry shall contain all the necessary attributes for the ethernet 10G facilities in the 40G card |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.1 | ColumnethRowStatus | read-write | current | Create, delete, put in service, out of service, and edit |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.2 | ColumnethLaserOffFarEndFail | read-write | current | To turn off Tx laser under certain failure scenarios |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.3 | ColumnoChTxActEthPwr | read-only | current | The target will be of the format xx.x and dBm will be assumed for powers within design/accuracy range. Powers outside the accuracy/design range will be clamped… |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.4 | ColumnoChTxMinEthPwr | read-only | current | The target will be of the format xx.x and dBm will be assumed |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.5 | ColumnoChTxMaxEthPwr | read-only | current | The target will be of the format xx.x and dBm will be assumed |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.6 | ColumnoChRxActEthPwr | read-only | current | The target will be of the format xx.x and dBm will be assumed for powers within design/accuracy range. Powers outside the accuracy/design range will be clamped… |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.7 | ColumnoChRxMinEthPwr | read-only | current | The target will be of the format xx.x and dBm will be assumed |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.8 | ColumnoChRxMaxEthPwr | read-only | current | The target will be of the format xx.x and dBm will be assumed |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.9 | ColumnmaxTransUnit | read-write | current | Maximum transmission unit |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.10 | ColumnflowControl | read-write | current | |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.11 | Columnequipment | read-write | current | |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.12 | ColumnethMapping | read-create | current | Sets the non-client OTM2 OTU rate and client mapping |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.13 | ColumnethLoopbackType | read-write | current | Facility if loopback is active; otherwise nothing is returned for this attribute. |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.14 | ColumnethPrimaryState | read-only | current | Primary State of the faciltiy. Can only be modified by changing the admin state. |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.15 | ColumnethSecondaryState | read-only | current | Secondary state for the facility. A facility can have more than one secondary state as different combinations of the individual secondary state. It is represen… |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.16 | ColumnethAdminState | read-write | current | This is a write-only variable. The user can restore or remove facilities using this command. You restore a facility by setting this variable to IS and remove i… |
| 1.3.6.1.4.1.562.68.11.3.1.3.1.1.17 | ColumnethAID | read-only | current | Facility AID as received from TL1. This should include the FAC type, shelf id, slot, and port. |
| 1.3.6.1.4.1.562.68.11.3.1.4 | NodennWAN | |||
| 1.3.6.1.4.1.562.68.11.3.1.4.1 | TablennWanTable | not-accessible | current | Contains entries for ethernet 10G facilities |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1 | RownnWanEntry | not-accessible | current | This entry shall contain all the necessary attributes for the ethernet 10G facilities in the 40G card |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.1 | ColumnframeChecksum | read-write | current | For mapping=GFP-F, value can be 0 or 32 |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.2 | ColumnwanMapping | read-write | current | GFP-F is only supported value |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.3 | ColumngfpRfi | read-write | current | Enable/Disable |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.4 | ColumngfpRtDelay | read-write | current | Enable/Disable |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.5 | ColumncondType | read-write | current | GFP CMF is the only supported value. |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.6 | Columnpreamble | read-write | current | KEEP/DISCARD ethernet preamble |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.7 | ColumnfcsErrFrames | read-write | current | KEEP/DISCARD FCS-errored frames end-to-end. |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.8 | ColumntransmittedUPI | read-write | current | This is received as a HEX value from TL1. The ranges are 0..FF. Since HEX can not be represented in ASN.1, a string is used. For SET operations, the user can e… |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.9 | ColumnwanPrimaryState | read-only | current | Primary State of the faciltiy. Can only be modified by changing the admin state. |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.10 | ColumnwanSecondaryState | read-only | current | Secondary state for the facility. A facility can have more than one secondary state as different combinations of the individual secondary state. It is represen… |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.11 | ColumnwanAdminState | read-write | current | This is a write-only variable. The user can restore or remove facilities using this command. You restore a facility by setting this variable to IS and remove i… |
| 1.3.6.1.4.1.562.68.11.3.1.4.1.1.12 | ColumnwanAID | read-only | current | Facility AID as received from TL1. This should include the FAC type, shelf id, slot, and port. |