NORTEL-OME40G-PM-PROV-MIB
20 objects
On Optical Multiservice Edge (OME), this module is used to initialize 40G PM registers and OM Counts. It is also used to set Threshold Level and HccsReference Values, and change Profiles for 40G facilities.
Imported Objects
| IF-MIB | ifIndex |
| NORTEL-OME40G-MIB | nnOme40G |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.68.11.3.4 | IdentitynnOme40GPmProv | from | On Optical Multiservice Edge (OME), this module is used to initialize 40G PM registers and OM Counts. It is also used to set Threshold Level and HccsReference … | |
| 1.3.6.1.4.1.562.68.11.3.4.1 | NodennOme40GMonConfig | |||
| 1.3.6.1.4.1.562.68.11.3.4.1.1 | TablennMonConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.1.1 | RownnMonConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.1.1.1 | ColumnhccsReference | read-write | current | High Correction Count Seconds. Applies for OTM2/3 only. Floating point between -1.00 and 4.00; Not supported by SMI-OM5K |
| 1.3.6.1.4.1.562.68.11.3.4.1.1.1.2 | Columninit40GPmRegisters | read-write | current | Initializes the counts for all montypes on the facility, if ifIndex contains ifType. If IfIndex contains only slot info, all 40G facilities on the card get res… |
| 1.3.6.1.4.1.562.68.11.3.4.1.1.1.3 | Columninit40GOmCounts | read-write | current | Initializes the counts for all montypes on the facility, if ifIndex contains ifType. If IfIndex contains only slot info, all 40G facilities on the card get res… |
| 1.3.6.1.4.1.562.68.11.3.4.1.2 | TablennMonTypeInstanceTable | not-accessible | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1 | RownnMonTypeInstanceEntry | not-accessible | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.1 | ColumnmonType | not-accessible | current | Monitored parm type; group of values acceptable; should act more like a bitmask |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.2 | Columnendpoint | not-accessible | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.3 | Columndirection | not-accessible | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.4 | ColumnaccumTimePeriod | not-accessible | current | Accumulation time period, group of values acceptable |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.5 | ColumnmonVal | read-write | current | Zero to reset or MONTYPE |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.6 | ColumnthreshLevel | read-write | current | Few Montype require scientific notation type input. e.g.:5E-10. So, this threshLevel value must be in string to support various input. |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.7 | ColumnsrcProfileId | read-write | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.8 | ColumndstProfileId | read-write | current | |
| 1.3.6.1.4.1.562.68.11.3.4.1.2.1.9 | ColumninitRegisters | read-write | current | |
| 1.3.6.1.4.1.562.68.11.3.4.2 | ScalarinitShelf40GPmRegisters | read-write | current | Initializes PM registers for 40G facilities on the shelf. |
| 1.3.6.1.4.1.562.68.11.3.4.3 | ScalarinitShelfEthOmCounts | read-write | current | Initiliazes Ethernet OM Counts for 40G facilities on the shelf. |