NSTACK-MIB
80 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.629 | Nodenbase | |||
| 1.3.6.1.4.1.629.1 | NodenbSwitchG1 | |||
| 1.3.6.1.4.1.629.1.50 | NodenbSwitchG1Il | |||
| 1.3.6.1.4.1.629.1.50.4 | NodenbsStackInfo | |||
| 1.3.6.1.4.1.629.1.50.4.1 | ScalarnbsStackSlotCapacity | read-only | mandatory | Max quantity of Slots possible in the Stack. |
| 1.3.6.1.4.1.629.1.50.4.2 | ScalarnbsStackSlotsTableSize | read-only | mandatory | Real size of Slots Table in the Stack. |
| 1.3.6.1.4.1.629.1.50.4.3 | ScalarnbsStackPortsCapacity | read-only | mandatory | Max quantity of Ports possible in the Stack . |
| 1.3.6.1.4.1.629.1.50.4.4 | ScalarnbsStackSlotPortsCapacity | read-only | mandatory | Max quantity of Ports possible in the Slot . |
| 1.3.6.1.4.1.629.1.50.4.5 | TablenbsStackSlotTable | not-accessible | mandatory | Table of descriptive and status information about the Slots. |
| 1.3.6.1.4.1.629.1.50.4.5.1 | RownbsStackSlotEntry | not-accessible | mandatory | An entry in the table, containing information about a single Slot. |
| 1.3.6.1.4.1.629.1.50.4.5.1.1 | ColumnnbsStackSlotIndex | read-only | mandatory | This object identifies the Slot# for which this entry contains information. |
| 1.3.6.1.4.1.629.1.50.4.5.1.2 | ColumnnbsStackSlotType | read-only | mandatory | Slot Types: 1=empty - Slot is Empty; 2=unknown - Slot is of the Unknown type; 3=standAlone - Stand Alone Device; 4=universal - Slot including Uplink Modules of… |
| 1.3.6.1.4.1.629.1.50.4.5.1.3 | ColumnnbsStackSlotMgmtStatus | read-only | mandatory | Slot Module Management Status: master - Master Slot Module; slave - Slave Slot Module. |
| 1.3.6.1.4.1.629.1.50.4.5.1.4 | ColumnnbsStackSlotPortsMaxNumber | read-only | mandatory | This object identifies the Maximum possible Ports Number in the Slot. |
| 1.3.6.1.4.1.629.1.50.4.5.1.5 | ColumnnbsStackSlotPortsNumber | read-only | mandatory | This object identifies the Real Ports Number in the Slot. |
| 1.3.6.1.4.1.629.1.50.4.5.1.6 | ColumnnbsStackSlotFirstPort | read-only | mandatory | This object identifies the number of the First Port in the Slot, according to the Stack Ports Numeration. |
| 1.3.6.1.4.1.629.1.50.4.5.1.7 | ColumnnbsStackSlotOperStatus | read-only | mandatory | Slot Oper Status: switchedOff - Slot is Switched-off; enabled - Slot is enabled; disabled - Slot is disabled; changing - Slot is changing. |
| 1.3.6.1.4.1.629.1.50.4.5.1.8 | ColumnnbsStackSlotAdminStatus | read-write | mandatory | Slot Admin Status: enabled - Slot is enabled; disabled - Slot is disabled. |
| 1.3.6.1.4.1.629.1.50.4.5.1.9 | ColumnnbsStackSlotRedundantPSMode | read-only | mandatory | Slot Redundant Power Supply Module Status: notConnected - Redundant Power Supply is not Existing; connected - Redundant Power Supply is Existing. |
| 1.3.6.1.4.1.629.1.50.4.5.1.10 | ColumnnbsStackSlotUplinkModulesNumber | read-only | mandatory | This object identifies the number of the Uplink Modules in the Slot. |
| 1.3.6.1.4.1.629.1.50.4.5.1.11 | ColumnnbsStackSlotReset | read-write | mandatory | This object is used to reset the corresponding Slot Module. |
| 1.3.6.1.4.1.629.1.50.4.5.1.12 | ColumnnbsStackSlotIp | read-only | mandatory | Ip address of the slot (if it has it; if it hasn't - 0.0.0.0). |
| 1.3.6.1.4.1.629.1.50.4.5.1.13 | ColumnnbsStackSlotHwVers | read-only | mandatory | This object holds the Software Version of the Slot Module. |
| 1.3.6.1.4.1.629.1.50.4.5.1.14 | ColumnnbsStackSlotSwVers | read-only | mandatory | This object holds the Hardware Version of the Slot Module. |
| 1.3.6.1.4.1.629.1.50.4.6 | TablenbsStackSlotUplTable | not-accessible | mandatory | A table of Uplink Modules mounted on the corresponding Slot of the Switch. |
| 1.3.6.1.4.1.629.1.50.4.6.1 | RownbsStackSlotUplEntry | not-accessible | mandatory | Contains the information needed to identify the Uplink Module of the Slot. |
| 1.3.6.1.4.1.629.1.50.4.6.1.1 | ColumnnbsStackSlotNumber | read-only | mandatory | The Slot # in the Device. |
| 1.3.6.1.4.1.629.1.50.4.6.1.2 | ColumnnbsStackSlotUplNumber | read-only | mandatory | The Uplink Module # in the corresponding Slot in the Device. |
| 1.3.6.1.4.1.629.1.50.4.6.1.3 | ColumnnbsStackSlotUplType | read-only | mandatory | Uplink Module Types: 1=uplAbsent - Uplink Module is Absent; 2=uplUnknown - Uplink Module of the Unknown type; 3=upl1GigaMM - Uplink Module including 1 GigaBit … |
| 1.3.6.1.4.1.629.1.50.4.6.1.4 | ColumnnbsStackSlotUplSwVers | read-only | mandatory | This object holds the Software Version of the Uplink Module. |
| 1.3.6.1.4.1.629.1.50.4.6.1.5 | ColumnnbsStackSlotUplHwVers | read-only | mandatory | This object holds the Hardware Version of the Uplink Module. |
| 1.3.6.1.4.1.629.1.50.4.6.1.6 | ColumnnbsStackSlotUplNPorts | read-only | mandatory | Number of Ports in the current UpLink Module. |
| 1.3.6.1.4.1.629.1.50.4.6.1.7 | ColumnnbsStackSlotUplFirstPort | read-only | mandatory | This object identifies the number of the First Port in the Uplink Module, according to the Stack Ports Numeration. |
| 1.3.6.1.4.1.629.1.50.4.6.1.8 | ColumnnbsStackSlotUplPortsMask | read-only | mandatory | Contains the list of the ports in the Uplink Module. The representation is a bit map. Each octet within the value of this object specifies a set of eight ports… |
| 1.3.6.1.4.1.629.1.50.4.6.1.9 | ColumnnbsStackSlotUplStatus | read-only | mandatory | Current status of the Uplink Module |
| 1.3.6.1.4.1.629.1.50.4.6.1.10 | ColumnnbsStackSlotUplHwDescr | read-only | mandatory | A description of the Hardware Version of the Uplink Module. |
| 1.3.6.1.4.1.629.1.50.4.6.1.11 | ColumnnbsStackSlotUplSwDescr | read-only | mandatory | A description of the Software Version of the Uplink Module. |
| 1.3.6.1.4.1.629.1.50.4.7 | TablenbsStackSpecSlotTable | not-accessible | mandatory | Table of descriptive and status information about the Special Slots. |
| 1.3.6.1.4.1.629.1.50.4.7.1 | RownbsStackSpecSlotEntry | not-accessible | mandatory | An entry in the table, containing information about a single Special Slot. |
| 1.3.6.1.4.1.629.1.50.4.7.1.1 | ColumnnbsStackSlotSpecNumber | read-only | mandatory | The Special Slot # in the Device. |
| 1.3.6.1.4.1.629.1.50.4.7.1.2 | ColumnnbsStackSlotSpecUplNumber | read-only | mandatory | The Uplink Module # in the corresponding Special Slot in the Device. |
| 1.3.6.1.4.1.629.1.50.4.7.1.3 | ColumnnbsStackSlotSpecUplRedundantMode | read-write | mandatory | Special Slot Additional Status: other=(1) - unknown Status or Module is not Valid; Redundant Modes used for the OptiSwitch Devices family: 'specialRedundant'(2… |
| 1.3.6.1.4.1.629.1.50.4.7.1.4 | ColumnnbsStackSlotSpecUplLeftLinkLed | read-only | mandatory | Rx Activity ower Left Connector in the Module. |
| 1.3.6.1.4.1.629.1.50.4.7.1.5 | ColumnnbsStackSlotSpecUplLeftActivityLed | read-only | mandatory | Tx Activity ower Left Connector in the Module. |
| 1.3.6.1.4.1.629.1.50.4.7.1.6 | ColumnnbsStackSlotSpecUplRightLinkLed | read-only | mandatory | Rx Activity ower Right Connector in the Module. |
| 1.3.6.1.4.1.629.1.50.4.7.1.7 | ColumnnbsStackSlotSpecUplRightActivityLed | read-only | mandatory | Tx Activity ower Right Connector in the Module. |
| 1.3.6.1.4.1.629.1.50.4.7.1.8 | ColumnnbsStackSlotSpecUplTestSemiAutoMode | read-write | mandatory | Used for the OptiSwitch Devices family to perform Test Operation while Module is in 'semiAutoRedundant' Mode. 'readyForTest' (1) - used for SNMP GET operation … |
| 1.3.6.1.4.1.629.1.50.4.10 | NodenbsStackMultiConPortGroup | |||
| 1.3.6.1.4.1.629.1.50.4.10.5 | TablenbsStackMultiConPortTable | not-accessible | mandatory | Table of descriptive and status information about the multi connectivity Ports. |
| 1.3.6.1.4.1.629.1.50.4.10.5.1 | RownbsStackMultiConPortEntry | not-accessible | mandatory | An entry in the table, containing information about a specific multi connectivity Port. |
| 1.3.6.1.4.1.629.1.50.4.10.5.1.1 | ColumnnbsStackMultiConPortId | read-only | mandatory | The Multi Connectivity Port Id in the Device. The same as [ifIndex] in the MIB-II. |
| 1.3.6.1.4.1.629.1.50.4.10.5.1.2 | ColumnnbsStackMultiConPortConnectorsNumber | read-only | mandatory | The real Number of Connectors in the corresponding Multi Connectivity Port in the Device. |
| 1.3.6.1.4.1.629.1.50.4.10.5.1.3 | ColumnnbsStackMultiConPortForceMode | read-write | mandatory | The Active Connector Forcing mode: other=(1) - Unknown mode; auto=(2) - System will choose automatically which Connector in the Multi Connectivity Port will be… |
| 1.3.6.1.4.1.629.1.50.4.10.5.1.4 | ColumnnbsStackMultiConPortForcedConnector | read-write | mandatory | The Number of Connector that will be forced in the corresponding Multi Connectivity Port in the Device. (0 - in case of [nbsStackMultiConPortForceMode] = 'auto… |
| 1.3.6.1.4.1.629.1.50.4.10.7 | TablenbsStackMultiConPortConnectorTable | not-accessible | mandatory | Table of descriptive and status information about the multi connectivity Ports. |
| 1.3.6.1.4.1.629.1.50.4.10.7.1 | RownbsStackMultiConPortConnectorEntry | not-accessible | mandatory | An entry in the table, containing information about a specific multi connectivity Port. |
| 1.3.6.1.4.1.629.1.50.4.10.7.1.1 | ColumnnbsStackMultiConPortNumber | read-only | mandatory | The Multi Connectivity Port # in the Device. |
| 1.3.6.1.4.1.629.1.50.4.10.7.1.2 | ColumnnbsStackMultiConPortConnectorNumber | read-only | mandatory | The Connector # in the corresponding Multi Connectivity Port in the Device. |
| 1.3.6.1.4.1.629.1.50.4.10.7.1.3 | ColumnnbsStackMultiConPortConnectorType | read-only | mandatory | Multi Connectivity Port Connector Types: other=(1) - Unknown type of connector; static=(2) - Not Changeable type of connector; gbic=(3) - GBIC type of connecto… |
| 1.3.6.1.4.1.629.1.50.4.10.7.1.4 | ColumnnbsStackMultiConPortConnectorSubType | read-only | mandatory | Multi Connectivity Port Connector Physical Sub Type: other=(1) - Unknown or N/A Connector's connectivity Type; rj45=(2) - Copper RJ45; sc=(3) - Regular Fibre O… |
| 1.3.6.1.4.1.629.1.50.4.10.7.1.5 | ColumnnbsStackMultiConPortConnectorLinkStatus | read-only | mandatory | Multi Connectivity Uplink Connector's Link Status: other=(1) - Unknown connector's Link status; notLinked=(2) - Connector's Link is down; linked=(3) - Connecto… |
| 1.3.6.1.4.1.629.1.50.4.10.7.1.6 | ColumnnbsStackMultiConPortConnectorRxLoss | read-only | mandatory | Multi Connectivity Uplink Connector's Rx Loss Status: other=(1) - Unknown connector's Rx Loss status; ok=(2) - Connector's Rx Loss not exists; loss=(3) - Conne… |
| 1.3.6.1.4.1.629.1.50.4.10.7.1.7 | ColumnnbsStackMultiConPortConnectorTxFault | read-only | mandatory | Multi Connectivity Uplink Connector's Link Status: other=(1) - Unknown connector's Tx Fault status; ok=(2) - Connector's Tx Fault not exists; fault=(3) - Conne… |
| 1.3.6.1.4.1.629.1.50.4.12 | NodenbsStackVcdGroup | |||
| 1.3.6.1.4.1.629.1.50.4.12.1 | ScalarnbsStackVcdGenSupport | read-only | mandatory | Virtual Cable Diagnostics feature support (per Device). |
| 1.3.6.1.4.1.629.1.50.4.12.2 | TablenbsStackVcdPortTable | not-accessible | mandatory | Table of status information about a Port's Virtual Cable Diagnostics. |
| 1.3.6.1.4.1.629.1.50.4.12.2.1 | RownbsStackVcdPortEntry | not-accessible | mandatory | An entry in the table, containing status information about a Port's Virtual Cable Diagnostics. |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.1 | ColumnnbsStackVcdPortId | read-only | mandatory | The Port Id supported VCD feature in the Device. The same as [ifIndex] in the MIB-II. |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.2 | ColumnnbsStackVcdPortTestRun | read-write | mandatory | The Port VCD Test mode: startVcdTest=(1) - used for SNMP SET operation to run VCD Test; testIsRunning=(2) - used for SNMP GET operation to show that VCD Test i… |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.3 | ColumnnbsStackVcdPortPair12Distance | read-only | mandatory | The distance [in CM] to the Problem found with help of VCD test into the Pair of Wires 1 and 2. |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.4 | ColumnnbsStackVcdPortPair12TestStatus | read-only | mandatory | The VCD Test result for Pair of Wires 1 and 2 : other=(1) - unknown; good=(2) - the Cable is OK (no problem found); testFail=(3)- the VCD Test was failed for s… |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.5 | ColumnnbsStackVcdPortPair36Distance | read-only | mandatory | The distance [in CM] to the Problem found with help of VCD test into the Pair of Wires 3 and 6. |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.6 | ColumnnbsStackVcdPortPair36TestStatus | read-only | mandatory | The VCD Test result for Pair of Wires 3 and 6 : other=(1) - unknown; good=(2) - the Cable is OK (no problem found); testFail=(3)- the VCD Test was failed for s… |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.7 | ColumnnbsStackVcdPortPair45Distance | read-only | mandatory | The distance [in CM] to the Problem found with help of VCD test into the Pair of Wires 4 and 5. |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.8 | ColumnnbsStackVcdPortPair45TestStatus | read-only | mandatory | The VCD Test result for Pair of Wires 4 and 5 : other=(1) - unknown; good=(2) - the Cable is OK (no problem found); testFail=(3)- the VCD Test was failed for s… |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.9 | ColumnnbsStackVcdPortPair78Distance | read-only | mandatory | The distance [in CM] to the Problem found with help of VCD test into the Pair of Wires 7 and 8. |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.10 | ColumnnbsStackVcdPortPair78TestStatus | read-only | mandatory | The VCD Test result for Pair of Wires 7 and 8 : other=(1) - unknown; good=(2) - the Cable is OK (no problem found); testFail=(3)- the VCD Test was failed for s… |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.11 | ColumnnbsStackVcdPortSupport | read-only | mandatory | Virtual Cable Diagnostics feature support (per Port). |
| 1.3.6.1.4.1.629.1.50.4.12.2.1.12 | ColumnnbsStackVcdPortTestTime | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-i… |
| 1.3.6.1.4.1.629.1.50.4.22 | NodespecSlotLinkChanged | The SNMP trap that is generated when Link status was changed on the GER Module. |