NWAYSMSS-MIB
222 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | enterprises |
| SNMPv2-SMI-v1 | Integer32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.118 | NodenwaysMSS | |||
| 1.3.6.1.4.1.2.6.118.1 | NodemssCommon | |||
| 1.3.6.1.4.1.2.6.118.1.1 | NodemssCommonHWVPD | |||
| 1.3.6.1.4.1.2.6.118.1.2 | NodemssCmnSrvrs | |||
| 1.3.6.1.4.1.2.6.118.1.2.1 | NodemssServerLanE | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1 | NodeibmLesBusMIB | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1 | NodeibmLesBusConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1 | TableibmLesBusConfTable | not-accessible | mandatory | This table contains configuration information for the LESs within the scope of the agent. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1 | RowibmLesBusConfEntry | not-accessible | mandatory | Each entry in this table represents a LES. The parameters in each entry apply to one emulated LAN served by one LES. Objects lesLanType and lesMaxFrameSize are… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.1 | ColumnatmDevNum | read-write | mandatory | Identifies ATM device to be used by LES/BUS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.2 | ColumnuseBurnedInEsi | read-write | mandatory | Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of the LES/BUS ATM Address. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.3 | ColumnconfiguredEsi | read-only | mandatory | Locally Administered End System Identifier that is to be used as the ESI component of the LES/BUS ATM Address. If this object is used do not use the ATM Forum … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.4 | ColumnconfiguredSelector | read-only | mandatory | Specifies value to be used as Selector field component of LES/BUS ATM Address. If this object is used do not use the ATM Forum elanLecAtmMask. If both are used… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5 | ColumnleArpResponseDest | read-write | mandatory | When the value is ALL_CLIENTS, LE_ARP_RESPONSE frames initiated or forwarded by the LES are sent to all clients on the Point-to-Multipoint Control Distribute V… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.6 | Columnuse2ControlDistributeVccs | read-write | mandatory | When TRUE, proxy clients are placed on one Point-to-Multipoint Control Distribute VCC and all other clients are placed on another Point-to-Multipoint Control D… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.7 | Columnuse2MulticastForwardVccs | read-write | mandatory | When TRUE: - proxy clients are placed on one Point-to-Multipoint Multicast Forward VCC and all other clients are placed on another Point-to-Multipoint Multicas… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.8 | ColumnvalidateBestEffortPcr | read-write | mandatory | When false, Best Effort Control Direct or Multicast Send VCCs will be accepted without regard to the signalled forward Peak Cell Rate (PCR). When true, Best Ef… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9 | ColumncontrolDirectMaxReservedBw | read-write | mandatory | Defines the maximum acceptable Sustained Cell Rate (SCR) for a Control Direct VCC; if SCR is not specified on the incoming call, then this parameter defines th… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.10 | ColumnmulticastSendMaxReservedBw | read-write | mandatory | Defines the maximum acceptable Sustained Cell Rate (SCR) for a Multicast Send VCC; if SCR is not specified on the incoming call, then this parameter defines th… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.11 | ColumncontrolDistributeVccType | read-write | mandatory | Specifies type of traffic characteristics to be associated with Control Distribute VCC(s). Bandwidth is not reserved for best effort traffic. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.12 | ColumncontrolDistributePcr | read-write | mandatory | Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Control Distribute VCC(s). Since the Control Distribute is a point-to-multipoint VCC, the specifie… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.13 | ColumncontrolDistributeScr | read-write | mandatory | Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Control Distribute VCC(s). Since the Control Distribute is a point-to-multipoint VCC, the spe… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.14 | ColumnmulticastForwardVccType | read-write | mandatory | Specifies type of traffic characteristics to be associated with Multicast Forward VCC(s). Bandwidth is not reserved for best effort traffic. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.15 | ColumnmulticastForwardPcr | read-write | mandatory | Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Multicast Forward VCC(s). Since the Multicast Multicast Forward is a point-to-multipoint VCC, the … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.16 | ColumnmulticastForwardScr | read-write | mandatory | Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Multicast Forward VCC(s). Since the Multicast Forward is a point-to-multipoint VCC, the speci… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.17 | ColumnvalidateJoinsWithLecs | read-write | mandatory | Specifies whether clients that attempt to join the ELAN must be validated by the LECS. The default value is taken from the corresponding object in the ELAN MIB… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.18 | ColumnredundancyEnabled | read-write | mandatory | Redundancy support allows clients to be assigned to a backup LES/BUS in the event that the primary LES/BUS for the ELAN fails. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.19 | ColumnredundancyRole | read-write | mandatory | Redundancy Protocol Role. Specifies whether this LES/BUS instance is to serve as the primary or backup LES/BUS for the ELAN. This object is only valid when red… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20 | ColumnredundancyAtmAddr | read-write | mandatory | ATM Address of Backup LES/BUS. Specifies the ATM address of the backup LES/BUS for the ELAN. Currently, only the private address formats defined by the ATM For… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.21 | ColumnbmonEnabled | read-write | mandatory | Enable BUS Monitor for ELAN. When TRUE, host usage of the Broadcast and Unknown Server is monitored. Periodic sampling is performed to provide information on t… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.22 | ColumnnumTopMacs | read-write | mandatory | Number of Top MAC Addresses to Record. Specifies the number of MACs to be recorded with the highest quantity of sampled frames sent to the BUS in a sample inte… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.23 | ColumnsampleDuration | read-write | mandatory | Number of seconds in each Sample Interval. Specifies the number of seconds in each BUS Monitor sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.24 | ColumninterSampleTime | read-write | mandatory | Minutes between start of one sample and the next sample. Specifies the number of minutes between the start of one BUS Monitor sample interval and the start of … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.25 | ColumnsampleRate | read-write | mandatory | Specifies the rate at which the BUS Monitor samples frames sent to the BUS during a sample interval. A value of 1 indicates that every frame sent to the BUS is… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.26 | ColumnbusMode | read-write | mandatory | With the Fast Bus Feature the BUS can run now run in one of three modes: systemBusMode(1) - Frames from BUS are buffered into system memory. All intelligent BU… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2 | NodeibmLesBusStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1 | TableibmLesBusStatTable | not-accessible | mandatory | This table contains all counters ???. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1 | RowibmLesBusStatEntry | not-accessible | mandatory | Each entry in this table contains a LES and its counters. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.1 | ColumnredundancyVccRefused | read-only | mandatory | Number of Redundancy VCC call setup requests rejected by the LES for any reason. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.2 | ColumnredundancyVccReleased | read-only | mandatory | Number of times a Redundancy VCC has been released by LEC/network for any reason. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.3 | ColumnredundancyVccFailure | read-only | mandatory | Number of Redundancy VCC requests made by LES that failed. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3 | NodeibmBusMonStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1 | TablebmonSampleInfoTable | not-accessible | mandatory | This table contains the BUS Monitor (BMON) information for the last complete sample processed. The following information is maintained for each BUS instance us… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1 | RowbmonSampleInfoEntry | not-accessible | mandatory | Each entry in this table contains BMON information for the last complete sample processed for a specific BUS instance. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.1 | ColumnbmonSampleStartTime | read-only | mandatory | Timestamp for the start of the last complete BUS Monitor sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.2 | ColumnbmonSampleDuration | read-only | mandatory | Duration of the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.3 | ColumnbmonNumTopMacs | read-only | mandatory | The number of top hosts actually recorded during the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.4 | ColumnbmonReceivedFrames | read-only | mandatory | The total number of frames received during the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.5 | ColumnbmonSampledFrames | read-only | mandatory | The number of frames actually sampled during the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.6 | ColumnbmonSamplingRate | read-only | mandatory | The frame sampling rate given as N where the rate is 1 out of every N frames will be sampled. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2 | TablebmonStatTable | not-accessible | mandatory | This table contains the BUS Monitor (BMON) counters for the top N heaviest users of a BUS (i.e., the N MAC addresses that originate the most data frames. Each … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1 | RowbmonStatEntry | not-accessible | mandatory | Each entry in this table contains BMON statistics for the top users of the indicated BUS instance. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.1 | ColumnbmonTopNRank | read-only | mandatory | Rank for the indicated host (i.e., MAC address) given as N where 1 is the host originating the most frames. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.2 | ColumnbmonTopNSrcMacAddr | read-only | mandatory | Source MAC Address for this host. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.3 | ColumnbmonTopNLecAtmAddr | read-only | mandatory | Associated LEC ATM Address for this host. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.4 | ColumnbmonTopNFramesSampled | read-only | mandatory | Number of frames sampled from this host during last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4 | NodeibmLesBusMIBConformance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1 | NodeibmLesBusMIBGroups | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.1 | NodeibmLesBusCConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.2 | NodeibmLesBusCStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.3 | NodeibmBusMonCStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.2 | NodeibmLesBusMIBCompliances | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.2.1 | NodeibmLesBusMIBCompliance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2 | NodeibmLesLecsMIB | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1 | NodeibmLesLecsConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1 | TablelesLecsConfTable | not-accessible | mandatory | This table contains the the configuration for LES-LECS interfaces. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1 | RowlesLecsConfEntry | not-accessible | mandatory | Each entry in this table contains configuration parameters for the LES-LECS operation for an individual ATM physical interface. Object lesLecsRowStatus is requ… |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.1 | ColumnlesLecsOperStatus | read-only | mandatory | The operational state of LES/LECS on this entry. Other defines the transition states between up and down. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.2 | ColumnlesLecsAdminStatus | read-write | mandatory | The administrative state of the LES/LECS on this entry. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.3 | ColumnlesLecsAtmDevNum | read-only | mandatory | Identifies ATM device to be used to interface with LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.4 | ColumnlesLecsAtmDevLineSpeed | read-only | mandatory | Line Speed of LECS ATM Device. This should not exposed to the user. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.5 | ColumnlesLecsUseBurnedInEsi | read-write | mandatory | Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of local ATM Address used when calling LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.6 | ColumnlesLecsConfiguredEsi | read-write | mandatory | Locally Administered End System Identifier that is to be used as the ESI component of the local ATM Address used when calling the LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.7 | ColumnlesLecsConfiguredSelector | read-write | mandatory | Specifies value to be used as Selector field component of local ATM Address used when calling the LECS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.8 | ColumnconfigDirectVccType | read-write | mandatory | Specifies type of traffic characteristics to be associated with Configuration Direct VCC to LECS. Bandwidth is not reserved for best effort traffic. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9 | ColumnconfigDirectPcr | read-write | mandatory | Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backward dir… |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10 | ColumnconfigDirectScr | read-write | mandatory | Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backwar… |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.11 | ColumnlesLecsConfRowStatus | read-write | mandatory | This object is used to create or delete entries in the lesLecsConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2 | NodeibmLesLecsMIBConformance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.1 | NodeibmLesLecsMIBGroups | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.1.1 | NodeibmLesLecsCConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.2 | NodeibmLesLecsMIBCompliances | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.2.2.2.1 | NodeibmLesLecsMIBCompliance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3 | NodeibmBcmMIB | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1 | NodebcmConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.1 | TablebcmConfTable | not-accessible | mandatory | This table contains configuration values for the broadcast management functions of a BUS. It is an extension to the busConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.1.1 | RowbcmConfEntry | not-accessible | mandatory | Each entry in this table represents an extension of a corresponding enty in the busConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.1.1.1 | ColumnbcmRouteCacheEnabled | read-write | mandatory | When 'true', the BCM will cache routes. When 'false', it will not. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.2 | ScalarbcmStaticTargetsNextId | read-only | mandatory | The next available index in the bcmStaticTargetsTable. The value of this object can be used as the index by the network manager to create an entry in the table… |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.3 | TablebcmStaticTargetsTable | not-accessible | mandatory | This table contains static broadcast target addresses for all the BCMs at this agent. Each BCM may have multiple entries. Object bcmStaticTargetsRowStatus is r… |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1 | RowbcmStaticTargetsEntry | not-accessible | mandatory | Each entry in this table defines a broadcast target address for a BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.1 | ColumnbcmStaticTargetsIndex | read-write | mandatory | A value which uniquely identifies a conceptual row in the bcmStaticTargetsTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.2 | ColumnbcmStaticTargetsAtmAddress | read-write | mandatory | The ATM address of the static broadcast target. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.3 | ColumnbcmStaticTargetsMacAddress | read-write | mandatory | The MAC address of the static broadcast target. This object is optional. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.4 | ColumnbcmStaticTargetsProtocol | read-write | mandatory | The protocol designation for static broadcast target. Indicates for which protocol broadcast frames are forwarded. Currently, only IPX is supported (i.e., conf… |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.3.1.5 | ColumnbcmStaticTargetsRowStatus | read-write | mandatory | This object is used to create or activate and inactivate entries in the bcmStaticTargetsTable. Note: in order to set RowStatus active bcmStaticTargetsProtocol … |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.4 | TablebcmIpConfTable | not-accessible | mandatory | This table contains configuration parameters for the IP protocol for the BCMs at the agent. This table augments the bcmConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1 | RowbcmIpConfEntry | not-accessible | mandatory | Each entry in this table represents the configuration for the IP protocol of a single BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1.1 | ColumnbcmIpConfOperStatus | read-only | mandatory | The operational state of BCM/IP on this entry. Other defines the transition states between up and down. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1.2 | ColumnbcmIpConfAdminStatus | read-write | mandatory | The administrative state of the BCM/IP on this entry. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.4.1.3 | ColumnbcmIpConfCacheAge | read-write | mandatory | The maximum number of minutes an IP Address entry is kept without re-verification of its location. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.5 | TablebcmIpxConfTable | not-accessible | mandatory | This table contains configuration parameters for the IPX protocol for the BCMs at the agent. This table augments the bcmConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1 | RowbcmIpxConfEntry | not-accessible | mandatory | Each entry in this table represents the configuration for the IPX protocol of a single BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1.1 | ColumnbcmIpxConfOperStatus | read-only | mandatory | The operational state of BCM/IPX on this entry. Other defines the transition states between up and down. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1.2 | ColumnbcmIpxConfAdminStatus | read-write | mandatory | The administrative state of the BCM/IPX on this entry. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.5.1.3 | ColumnbcmIpxConfCacheAge | read-write | mandatory | The maximum number of minutes an IPX Address entry is kept without re-verification of its location. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.6 | TablebcmNbConfTable | not-accessible | mandatory | This table contains configuration parameters for the NetBIOS protocol for the BCMs at the agent. This table augments the bcmConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1 | RowbcmNbConfEntry | not-accessible | mandatory | Each entry in this table represents the configuration for the NetBIOS protocol of a single BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1.1 | ColumnbcmNbConfOperStatus | read-only | mandatory | The operational state of BCM/NetBIOS on this entry. Other defines the transition states between up and down. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1.2 | ColumnbcmNbConfAdminStatus | read-write | mandatory | The administrative state of the BCM/NetBIOS on this entry. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.1.6.1.3 | ColumnbcmNbConfCacheAge | read-write | mandatory | The maximum number of minutes an NetBIOS Address entry is kept without re-verification of its location. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2 | NodebcmStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1 | TablebcmStatTable | not-accessible | mandatory | This table contains all the counters maintained by the BCMs within the scope of an agent. This table augments the bcmConfTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1 | RowbcmStatEntry | not-accessible | mandatory | Each entry in this table contains a BCM and its counters. These counters accumulate totals for all protocols. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.1 | ColumnbcmFramesReceived | read-only | mandatory | Total number of frames received by BCM for all protocols. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.2 | ColumnbcmOctetsReceived | read-only | mandatory | Total number of octets received by BCM for all protocols. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.3 | ColumnbcmFramesReturned | read-only | mandatory | Total number of frames, for all protocols, not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.4 | ColumnbcmOctetsReturned | read-only | mandatory | Total number of octets, for all protocols, not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.5 | ColumnbcmFramesDiscarded | read-only | mandatory | Total number of frames discarded (filtered) by BCM for all protocols. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.6 | ColumnbcmOctetsDiscarded | read-only | mandatory | Total number of octets discarded (filtered) by BCM for all protocols. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.7 | ColumnbcmFramesTransmitted | read-only | mandatory | Total number of frames transmitted by BCM for all protocols. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.8 | ColumnbcmOctetsTransmitted | read-only | mandatory | Total number of octets transmitted by BCM for all protocols. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.9 | ColumnbcmTransmitErrorFrames | read-only | mandatory | Total number of frames, for all protocols, that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.10 | ColumnbcmTransmitErrorOctets | read-only | mandatory | Total number of octets, for all protocols, that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.11 | ColumnbcmBroadcastFramesDirectedNoRif | read-only | mandatory | Total number of frames, for all protocols, transmitted by BCM with no RI Field. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.12 | ColumnbcmBroadcastFramesDirectedAre | read-only | mandatory | Total number of frames, for all protocols, transmitted by BCM left as ARE. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.13 | ColumnbcmBroadcastFramesDirectedSte | read-only | mandatory | Total number of frames, for all protocols, transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF multicast f… |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.1.1.14 | ColumnbcmBroadcastFramesDirectedSrf | read-only | mandatory | Frames sent on one VCC, changed to SRF. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2 | TablebcmIpStatTable | not-accessible | mandatory | Each entry in this table contains the counters for the IP operation of a BCM. The table augments the bcmStatTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1 | RowbcmIpStatEntry | not-accessible | mandatory | Each entry in this table contains the counters for the IP operation of a BCM. The table augments the bcmStatTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.1 | ColumnbcmIpFramesReceived | read-only | mandatory | Number of (IP) frames received by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.2 | ColumnbcmIpOctetsReceived | read-only | mandatory | Number of (IP) octets received by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.3 | ColumnbcmIpFramesReturned | read-only | mandatory | Number of (IP) frames not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.4 | ColumnbcmIpOctetsReturned | read-only | mandatory | Number of (IP) octets not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.5 | ColumnbcmIpFramesDiscarded | read-only | mandatory | Number of (IP) frames discarded (filtered) by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.6 | ColumnbcmIpOctetsDiscarded | read-only | mandatory | Number of (IP) octets discarded (filtered) by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.7 | ColumnbcmIpFramesTransmitted | read-only | mandatory | Number of (IP) frames transmitted by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.8 | ColumnbcmIpOctetsTransmitted | read-only | mandatory | Number of (IP) octets transmitted by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.9 | ColumnbcmIpTransmitErrorFrames | read-only | mandatory | Number of (IP) frames that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.10 | ColumnbcmIpTransmitErrorOctets | read-only | mandatory | Number of (IP) octets that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.11 | ColumnbcmIpBroadcastFramesDirectedNoRif | read-only | mandatory | Number of (IP) frames transmitted by BCM with no RI Field. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.12 | ColumnbcmIpBroadcastFramesDirectedAre | read-only | mandatory | Number of (IP) frames transmitted by BCM left as ARE. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.13 | ColumnbcmIpBroadcastFramesDirectedSte | read-only | mandatory | Number of (IP) frames transmitted by BCM left as STE. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.2.1.14 | ColumnbcmIpBroadcastFramesDirectedSrf | read-only | mandatory | Number of (IP) frames transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF multicast frame (a rare frame ty… |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3 | TablebcmIpxStatTable | not-accessible | mandatory | Each entry in this table contains the counters for the IPX operation of a BCM. The table augments the bcmStatTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1 | RowbcmIpxStatEntry | not-accessible | mandatory | Each entry in this table contains the counters for the IPX operation of a BCM. The table augments the bcmStatTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.1 | ColumnbcmIpxFramesReceived | read-only | mandatory | Number of (IPX) frames received by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.2 | ColumnbcmIpxOctetsReceived | read-only | mandatory | Number of (IPX) octets received by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.3 | ColumnbcmIpxFramesReturned | read-only | mandatory | Number of (IPX) frames not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.4 | ColumnbcmIpxOctetsReturned | read-only | mandatory | Number of (IPX) octets not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.5 | ColumnbcmIpxFramesDiscarded | read-only | mandatory | Number of (IPX) frames discarded (filtered) by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.6 | ColumnbcmIpxOctetsDiscarded | read-only | mandatory | Number of (IPX) octets discarded (filtered) by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.7 | ColumnbcmIpxFramesTransmitted | read-only | mandatory | Number of (IPX) frames transmitted by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.8 | ColumnbcmIpxOctetsTransmitted | read-only | mandatory | Number of (IPX) octets transmitted by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.9 | ColumnbcmIpxTransmitErrorFrames | read-only | mandatory | Number of (IPX) frames that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.10 | ColumnbcmIpxTransmitErrorOctets | read-only | mandatory | Number of (IPX) octets that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.11 | ColumnbcmIpxBroadcastFramesDirectedNoRif | read-only | mandatory | Frame sent on one VCC, no RIF in them. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.12 | ColumnbcmIpxBroadcastFramesDirectedAre | read-only | mandatory | Number of (IPX) frames transmitted by BCM left as ARE. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.13 | ColumnbcmIpxBroadcastFramesDirectedSte | read-only | mandatory | Number of (IPX) frames transmitted by BCM left as STE. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.3.1.14 | ColumnbcmIpxBroadcastFramesDirectedSrf | read-only | mandatory | Number of (IPX) frames transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF multicast frame (a rare frame t… |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4 | TablebcmNbStatTable | not-accessible | mandatory | Each entry in this table contains the counters for the NetBIOS operation of a BCM. The table augments the bcmStatTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1 | RowbcmNbStatEntry | not-accessible | mandatory | Each entry in this table contains the counters for the NetBIOS operation of a BCM. The table augments the bcmStatTable. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.1 | ColumnbcmNbFramesReceived | read-only | mandatory | Number of (NetBIOS) frames received by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.2 | ColumnbcmNbOctetsReceived | read-only | mandatory | Number of (NetBIOS) octets received by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.3 | ColumnbcmNbFramesReturned | read-only | mandatory | Number of (NetBIOS) frames not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.4 | ColumnbcmNbOctetsReturned | read-only | mandatory | Number of (NetBIOS) octets not managed by BCM and returned to BUS for transmission. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.5 | ColumnbcmNbFramesDiscarded | read-only | mandatory | Number of (NetBIOS) frames discarded (filtered) by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.6 | ColumnbcmNbOctetsDiscarded | read-only | mandatory | Number of (NetBIOS) octets discarded (filtered) by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.7 | ColumnbcmNbFramesTransmitted | read-only | mandatory | Number of (NetBIOS) frames transmitted by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.8 | ColumnbcmNbOctetsTransmitted | read-only | mandatory | Number of (NetBIOS) octets transmitted by BCM. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.9 | ColumnbcmNbTransmitErrorFrames | read-only | mandatory | Number of (NetBIOS) frames that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.10 | ColumnbcmNbTransmitErrorOctets | read-only | mandatory | Number of (NetBIOS) octets that the BCM could not sent due to an error. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.11 | ColumnbcmNbBroadcastFramesDirectedNoRif | read-only | mandatory | Number of (NetBIOS) frames transmitted by BCM with no RI Field. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.12 | ColumnbcmNbBroadcastFramesDirectedAre | read-only | mandatory | Number of (NetBIOS) frames transmitted by BCM left as ARE. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.13 | ColumnbcmNbBroadcastFramesDirectedSte | read-only | mandatory | Number of (NetBIOS) frames transmitted by BCM left as STE. |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.2.4.1.14 | ColumnbcmNbBroadcastFramesDirectedSrf | read-only | mandatory | Number of (NetBIOS) frames transmitted by BCM that were converted from ARE or STE to SRF by Source Route Management, or left as SRF ulticast frame (a rare fram… |
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3 | NodebcmMIBConformance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1 | NodebcmMIBGroups | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.1 | NodebcmCConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.2 | NodebcmCStaticTargetsConfigGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.3 | NodebcmCIpConfigGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.4 | NodebcmCIpxConfigGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.5 | NodebcmCNbConfigGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.6 | NodebcmCStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.7 | NodebcmCIpStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.8 | NodebcmCIpxStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.1.9 | NodebcmCNbStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.2 | NodebcmMIBCompliances | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.3.3.2.1 | NodebcmMIBCompliance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4 | NodeibmElanMIB | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.1 | NodeibmElanAdminGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.2 | NodeibmElanConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.2.2 | TableibmElanLesTable | not-accessible | mandatory | This table contains configuration information for the all LESs for each ELAN specified in the elanConfTable. This table is used by the LECS to know if a backup… |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1 | RowibmElanLesEntry | not-accessible | mandatory | Each entry represents a LES/Emulated LAN pair this agent maintains. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.1 | ColumnibmBackupLesAtmAddrValid | read-write | mandatory | When True specifies the backup LES is specified by ibmBackupLesAtmAddr. When False specifies no backup LES is configured. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.2 | ColumnibmBackupLesAtmAddr | read-write | mandatory | The ATM address of the backup LES. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3 | NodeibmElanLecsGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1 | NodeibmElanLecsConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1 | TableibmLecsConfTable | not-accessible | mandatory | This table contains configuration information the LECSs within the scope of the agent. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1 | RowibmLecsConfEntry | not-accessible | mandatory | Each entry represents a LECS this agent maintains. Objects lecsUseBurnedInEsi, lecsConfiguredEsi, and lecsConfiguredSelector cannot be modified unless the lecs… |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.1 | ColumnlecsUseBurnedInEsi | read-write | mandatory | Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of the LECS ATM Address. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.2 | ColumnlecsConfiguredEsi | read-write | mandatory | Locally Administered End System Identifier that is to be used as the ESI component of the LECS's ATM Address. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.3 | ColumnlecsConfiguredSelector | read-write | mandatory | Specifies value to be used as Selector field component of LECS's ATM address. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4 | ColumnlecsValidateBestEffortPcr | read-write | mandatory | When false, Best Effort Configuration Direct VCCs will be accepted without regard to the signalled forward Peak Cell Rate (PCR). When true, Best Effort VCCs wi… |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5 | ColumnconfigDirectMaxReservedBw | read-write | mandatory | Defines the maximum acceptable Sustained Cell Rate (SCR) for a Configuration Direct VCC; if SCR is not specified on the incoming call, then this parameter defi… |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.6 | ColumnatmDevLineSpeed | read-only | mandatory | Line Speed of LECS ATM Device. This should not exposed to the user. |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.7 | ColumnidleVccTime | read-write | mandatory | When the maximum number of VCCs is exceeded at the LECS, VCCs are released (see lecsMaxVccs). All active VCCs at the LECS are scanned. If a VCC has been inacti… |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.8 | ColumnlecsMaxVccs | read-write | mandatory | This is the maximum number of simultaneous VCCs supported by the LECS. If this number is exceeded, then VCCs will be released (see idleVccTime). |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.9 | ColumnlecsDomainName | read-write | mandatory | This is the name to associate with the Domain of the LECS |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.4 | NodeibmElanMIBConformance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.4.1 | NodeibmElanMIBGroups | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.4.1.1 | NodeibmElanCConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.4.1.2 | NodeibmLecsCGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.4.2 | NodeibmElanMIBCompliances | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.4.4.2.1 | NodeibmElanMIBCompliance | |||
| 1.3.6.1.4.1.2.6.118.1.3 | NodemssCmnClnts |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmPrivateAddrEsi | OCTET STRING(SIZE(6)) | ||
| AtmSelector | OCTET STRING(SIZE(1)) | ||
| AtmVccTrafficType | INTEGER { bestEffort(1), reservedBandwidth(2) } | ||
| BcmCacheAge | INTEGER(0..255) |