NetWare-Host-Ext-MIB
106 objects
No module-level DESCRIPTION found.
Imported Objects
| HOST-RESOURCES-MIB | hrDeviceIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1213-MIB | ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.23 | Nodenovell | |||
| 1.3.6.1.4.1.23.2 | NodemibDoc | |||
| 1.3.6.1.4.1.23.2.27 | NodenwHostExtensions | |||
| 1.3.6.1.4.1.23.2.27.2 | NodenwhrStorage | |||
| 1.3.6.1.4.1.23.2.27.2.1 | NodenwhrStorageTypes | |||
| 1.3.6.1.4.1.23.2.27.2.1.1 | NodenwhrStorageVolume | |||
| 1.3.6.1.4.1.23.2.27.2.1.2 | NodenwhrStorageMemoryPermanent | |||
| 1.3.6.1.4.1.23.2.27.2.1.3 | NodenwhrStorageMemoryAlloc | |||
| 1.3.6.1.4.1.23.2.27.2.1.4 | NodenwhrStorageCacheBuffers | |||
| 1.3.6.1.4.1.23.2.27.2.1.5 | NodenwhrStorageCacheMovable | |||
| 1.3.6.1.4.1.23.2.27.2.1.6 | NodenwhrStorageCacheNonMovable | |||
| 1.3.6.1.4.1.23.2.27.2.1.7 | NodenwhrStorageCodeAndDataMemory | |||
| 1.3.6.1.4.1.23.2.27.2.1.8 | NodenwhrStorageDOSMemory | |||
| 1.3.6.1.4.1.23.2.27.2.1.9 | NodenwhrStorageIOEngineMemory | |||
| 1.3.6.1.4.1.23.2.27.2.1.10 | NodenwhrStorageMSEngineMemory | |||
| 1.3.6.1.4.1.23.2.27.2.1.11 | NodenwhrStorageUnclaimedMemory | |||
| 1.3.6.1.4.1.23.2.27.3 | NodenwhrDevice | |||
| 1.3.6.1.4.1.23.2.27.3.1 | NodenwhrDeviceTypes | |||
| 1.3.6.1.4.1.23.2.27.3.1.1 | NodenwhrDeviceMirroredServerLink | |||
| 1.3.6.1.4.1.23.2.27.3.2 | TablenwhrDeviceTable | not-accessible | mandatory | Extensions to the (conceptual) table of devices contained by the host |
| 1.3.6.1.4.1.23.2.27.3.2.1 | RownwhrDeviceEntry | not-accessible | mandatory | Extensions to a (conceptual) entry for one device contained by the host |
| 1.3.6.1.4.1.23.2.27.3.2.1.1 | ColumnnwhrDeviceAdapterIndex | read-only | mandatory | The index into the nwhrAdapterTable of the adapter/controller to which this device is attached (or physically manifested by, for logical device). Zero if not a… |
| 1.3.6.1.4.1.23.2.27.3.2.1.2 | ColumnnwhrDeviceControllerNumber | read-only | mandatory | The controller number (relative to its adapter), or the SCSI target ID, or zero if not applicable. Note that zero is a valid value for both controller number a… |
| 1.3.6.1.4.1.23.2.27.3.2.1.3 | ColumnnwhrDeviceNumber | read-only | mandatory | The device number (relative to its controller), or the SCSI LUN (Logical Unit Number), or zero if not applicable. Note that zero is a valid value for both devi… |
| 1.3.6.1.4.1.23.2.27.3.3 | ScalarnwhrProcessorCount | read-only | mandatory | The number of processor devices contained in this host |
| 1.3.6.1.4.1.23.2.27.3.4 | ScalarnwhrPrinterCount | read-only | mandatory | The number of printer devices contained in this host |
| 1.3.6.1.4.1.23.2.27.3.5 | ScalarnwhrDiskStorageCount | read-only | mandatory | The number of Disk Storage devices contained in this host. |
| 1.3.6.1.4.1.23.2.27.3.6 | TablenwhrDiskStorageTable | not-accessible | mandatory | Extensions to the hrDiskStorageTable |
| 1.3.6.1.4.1.23.2.27.3.6.1 | RownwhrDiskStorageEntry | not-accessible | mandatory | Extensions to the hrDiskStorageEntry |
| 1.3.6.1.4.1.23.2.27.3.6.1.1 | ColumnnwhrDiskStorageHeads | read-only | mandatory | The number of read/write heads on the drive |
| 1.3.6.1.4.1.23.2.27.3.6.1.2 | ColumnnwhrDiskStorageCylinders | read-only | mandatory | The number of cylinders on the drive. |
| 1.3.6.1.4.1.23.2.27.3.6.1.3 | ColumnnwhrDiskStorageSectorsPerTrack | read-only | mandatory | The number of sectors per track on the drive. |
| 1.3.6.1.4.1.23.2.27.3.6.1.4 | ColumnnwhrDiskStorageSectorSize | read-only | mandatory | The size of a sector in bytes. |
| 1.3.6.1.4.1.23.2.27.3.6.1.5 | ColumnnwhrDiskStorageBlockSize | read-only | mandatory | The driver maximum I/O request size in bytes. |
| 1.3.6.1.4.1.23.2.27.3.7 | TablenwhrPhysicalPartitionTable | not-accessible | mandatory | A table of physical partitions for long-term storage devices contained by the host. |
| 1.3.6.1.4.1.23.2.27.3.7.1 | RownwhrPhysicalPartitionEntry | not-accessible | mandatory | An entry for one partition. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the nwhrPhysicalPartitionEntry. |
| 1.3.6.1.4.1.23.2.27.3.7.1.1 | ColumnnwhrPhysicalPartitionIndex | read-only | mandatory | A unique value for each physical partition on this long-term storage device. The value for each long-term storage device must remain constant from one re- init… |
| 1.3.6.1.4.1.23.2.27.3.7.1.2 | ColumnnwhrPhysicalPartitionType | read-only | mandatory | The type of this physical partition. |
| 1.3.6.1.4.1.23.2.27.3.7.1.3 | ColumnnwhrPhysicalPartitionDescr | read-only | mandatory | A textual description of this partition. |
| 1.3.6.1.4.1.23.2.27.3.7.1.4 | ColumnnwhrPhysicalPartitionSize | read-only | mandatory | The size (in Kilobytes) of this physical partition. |
| 1.3.6.1.4.1.23.2.27.3.8 | TablenwhrHotfixTable | not-accessible | mandatory | The table of hotfix areas of diskStorage devices contained by the host. Note that this table is potentially sparse: an entry exists if the corresponding value … |
| 1.3.6.1.4.1.23.2.27.3.8.1 | RownwhrHotfixEntry | not-accessible | mandatory | An entry for one hotfix redirection area contained by the host. |
| 1.3.6.1.4.1.23.2.27.3.8.1.1 | ColumnnwhrHotfixUnits | read-only | mandatory | The size, in bytes, of the hotfix blocks. |
| 1.3.6.1.4.1.23.2.27.3.8.1.2 | ColumnnwhrHotfixTotal | read-only | mandatory | The size of the total hotfix redirection area represented by this entry, in units of nwhrHotfixUnits. |
| 1.3.6.1.4.1.23.2.27.3.8.1.3 | ColumnnwhrHotfixUsed | read-only | mandatory | The number of hotfix redirected blocks, i.e. the number of bad blocks that hotfix has found. |
| 1.3.6.1.4.1.23.2.27.3.8.1.4 | ColumnnwhrHotfixReserved | read-only | mandatory | The number of hotfix redirection blocks reserved for system use. |
| 1.3.6.1.4.1.23.2.27.3.9 | ScalarnwhrAdapterCount | read-only | mandatory | The number of adapters contained in this host. |
| 1.3.6.1.4.1.23.2.27.3.10 | TablenwhrAdapterTable | not-accessible | mandatory | General information for each adapter board in the host: driver name and version, Interrupt, DMA, I/O address, and number of attached devices. |
| 1.3.6.1.4.1.23.2.27.3.10.1 | RownwhrAdapterEntry | not-accessible | mandatory | General information for a particular adapter board in the host: driver name and version, Interrupt, DMA, I/O address, and number of attached devices. |
| 1.3.6.1.4.1.23.2.27.3.10.1.1 | ColumnnwhrAdapterIndex | read-only | mandatory | A unique value for each adapter contained in the host. The value for each adapter must remain constant at least from one re-initialization of the agent to the … |
| 1.3.6.1.4.1.23.2.27.3.10.1.2 | ColumnnwhrAdapterType | read-only | mandatory | An indication of the type of adapter. This will typically be one of the possible values of hrDeviceType. |
| 1.3.6.1.4.1.23.2.27.3.10.1.3 | ColumnnwhrAdapterDescr | read-only | mandatory | A description the hardware for this adapter. This will usually include manufacturer, model, and version information. For LAN adapters, this could include the s… |
| 1.3.6.1.4.1.23.2.27.3.10.1.4 | ColumnnwhrAdapterDriverDescr | read-only | mandatory | A textual description of the driver for this adapter |
| 1.3.6.1.4.1.23.2.27.3.10.1.5 | ColumnnwhrAdapterDriverMajorVer | read-only | mandatory | The major version number of the adapter driver. |
| 1.3.6.1.4.1.23.2.27.3.10.1.6 | ColumnnwhrAdapterDriverMinorVer | read-only | mandatory | The minor version number of the adapter driver. |
| 1.3.6.1.4.1.23.2.27.3.10.1.7 | ColumnnwhrAdapterPort1 | read-only | mandatory | The primary I/O port block. This is the base address of a block of I/O addresses decoded by the adapter. The value will be zero if there is no I/O address asso… |
| 1.3.6.1.4.1.23.2.27.3.10.1.8 | ColumnnwhrAdapterPort1Len | read-only | mandatory | The number of I/O ports in the block starting at nwhrAdapterPort1. This value is used in conjunction with nwhrAdapterPort1 to determine the I/O block used by t… |
| 1.3.6.1.4.1.23.2.27.3.10.1.9 | ColumnnwhrAdapterPort2 | read-only | mandatory | The secondary I/O port block. This is the base address of a block of I/O addresses decoded by the adapter. The value will be zero if there is no secondary I/O … |
| 1.3.6.1.4.1.23.2.27.3.10.1.10 | ColumnnwhrAdapterPort2Len | read-only | mandatory | The number of I/O ports in the block starting at nwhrAdapterPort2. This value is used in conjunction with nwhrAdapterPort2 to determine the secondary I/O block… |
| 1.3.6.1.4.1.23.2.27.3.10.1.11 | ColumnnwhrAdapterMem1 | read-only | mandatory | The primary Memory Address. This is the base address of the primary block of memory space decoded by the adapter. The value will be zero if there is no memory … |
| 1.3.6.1.4.1.23.2.27.3.10.1.12 | ColumnnwhrAdapterMem1Len | read-only | mandatory | The length, in bytes, of the primary memory address block. From this value and nwhrAdapterMem1, a determination can be made as to which memory address ranges a… |
| 1.3.6.1.4.1.23.2.27.3.10.1.13 | ColumnnwhrAdapterMem2 | read-only | mandatory | The secondary Memory Address. This is the address of the secondary block of memory space decoded by the adapter. The value will be zero if there is no secondar… |
| 1.3.6.1.4.1.23.2.27.3.10.1.14 | ColumnnwhrAdapterMem2Len | read-only | mandatory | The length, in bytes, of the secondary memory address block. From this value and nwhrAdapterMem2, a determination can be made as to which memory address ranges… |
| 1.3.6.1.4.1.23.2.27.3.10.1.15 | ColumnnwhrAdapterDMA1 | read-only | mandatory | The primary DMA channel used by the adapter. The value will be 255 if this adapter does not use any DMA channel. |
| 1.3.6.1.4.1.23.2.27.3.10.1.16 | ColumnnwhrAdapterDMA2 | read-only | mandatory | The secondary DMA channel used by the adapter. The value will be 255 if this adapter does not use a secondary DMA channel. |
| 1.3.6.1.4.1.23.2.27.3.10.1.17 | ColumnnwhrAdapterInterrupt1 | read-only | mandatory | The primary interrupt vector used by the adapter. The value will be 255 if this adapter does not use any Interrupt. |
| 1.3.6.1.4.1.23.2.27.3.10.1.18 | ColumnnwhrAdapterInterrupt2 | read-only | mandatory | The secondary interrupt vector used by the adapter. The value will be 255 if this adapter does not use a secondary Interrupt. |
| 1.3.6.1.4.1.23.2.27.3.10.1.19 | ColumnnwhrAdapterSlot | read-only | mandatory | The slot in which the adapter resides. The value will be zero if the slot information is not available on the platform, such as an ISA based PC, otherwise the … |
| 1.3.6.1.4.1.23.2.27.3.10.1.20 | ColumnnwhrAdapterDevices | read-only | mandatory | The number of devices associated with this adapter. For instance, the number of drives attached to a disk controller. |
| 1.3.6.1.4.1.23.2.27.3.11 | ScalarnwhrMslCount | read-only | mandatory | The number of Mirrored Server Link (MSL) devices contained in this host. |
| 1.3.6.1.4.1.23.2.27.3.12 | TablenwhrMslTable | not-accessible | mandatory | The (conceptual) table of Mirrored Server Link (MSL) devices contained by the host. Note that this table is potentially sparse: a (conceptual) entry exists onl… |
| 1.3.6.1.4.1.23.2.27.3.12.1 | RownwhrMslEntry | not-accessible | mandatory | A (conceptual) entry for one Mirrored Server Link (MSL) device contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable … |
| 1.3.6.1.4.1.23.2.27.3.12.1.1 | ColumnnwhrMslState | read-only | mandatory | The current state of this MSL device. |
| 1.3.6.1.4.1.23.2.27.3.12.1.2 | ColumnnwhrMslSpeed | read-only | mandatory | The nominal bandwidth of the MSL link in bits per second. |
| 1.3.6.1.4.1.23.2.27.3.12.1.3 | ColumnnwhrMslSends | read-only | mandatory | The number of sends from this MSL device. |
| 1.3.6.1.4.1.23.2.27.3.12.1.4 | ColumnnwhrMslReceives | read-only | mandatory | The number of receives by this MSL device. |
| 1.3.6.1.4.1.23.2.27.3.12.1.5 | ColumnnwhrMslInErrors | read-only | mandatory | The number of errors in receives by this MSL device. |
| 1.3.6.1.4.1.23.2.27.3.12.1.6 | ColumnnwhrMslOutErrors | read-only | mandatory | The number of errors on sends by this MSL device. |
| 1.3.6.1.4.1.23.2.27.3.13 | TablenwhrPrinterTable | not-accessible | mandatory | A set of data for each accessible printer, whether local or remote. |
| 1.3.6.1.4.1.23.2.27.3.13.1 | RownwhrPrinterEntry | not-accessible | mandatory | A set of data for a particular printer. |
| 1.3.6.1.4.1.23.2.27.3.13.1.1 | ColumnnwhrPrinterID | read-only | mandatory | A unique value for each accessible printer. This value will be constant for the lifetime of the mapping. |
| 1.3.6.1.4.1.23.2.27.3.13.1.2 | ColumnnwhrPrinterType | read-only | mandatory | The type of the printer. |
| 1.3.6.1.4.1.23.2.27.3.13.1.3 | ColumnnwhrPrinterLocalName | read-only | mandatory | The local name for the printer. |
| 1.3.6.1.4.1.23.2.27.3.13.1.4 | ColumnnwhrPrinterQueueName | read-only | mandatory | The name of the print queue associated with this printer. Zero length string if printer is local. |
| 1.3.6.1.4.1.23.2.27.3.13.1.5 | ColumnnwhrPrinterServerName | read-only | mandatory | The name of the server containing the print queue. Zero length string if printer is local. |
| 1.3.6.1.4.1.23.2.27.3.13.1.6 | ColumnnwhrPrinterTransportDomain | read-only | mandatory | The transport domain associated with the printer (print queue). |
| 1.3.6.1.4.1.23.2.27.3.13.1.7 | ColumnnwhrPrinterTransportAddress | read-only | mandatory | The transport address associated with this printer (print queue). Zero length string if printer is local. |
| 1.3.6.1.4.1.23.2.27.3.13.1.8 | ColumnnwhrPrinterDeviceIndex | read-only | mandatory | The value of hrDeviceIndex for this printer. Zero if non-local. |
| 1.3.6.1.4.1.23.2.27.10 | NodenwhrOdi | |||
| 1.3.6.1.4.1.23.2.27.10.1 | ScalarnwhrLslOutPkts | read-only | mandatory | The total number of of SendPacket requests made to the LSL. |
| 1.3.6.1.4.1.23.2.27.10.2 | ScalarnwhrLslInPkts | read-only | mandatory | The total number of GetStackECB requests made by MLIDs to the LSL. |
| 1.3.6.1.4.1.23.2.27.10.3 | ScalarnwhrLslUnclaimedPkts | read-only | mandatory | The total number of times a packet was received and not consumed by a protocol stack. |
| 1.3.6.1.4.1.23.2.27.10.4 | TablenwhrProtocolTable | not-accessible | mandatory | The Protocol Table provides basic information about protocols running in the host, management stations should refer to the appropriate protocol MIBs for the de… |
| 1.3.6.1.4.1.23.2.27.10.4.1 | RownwhrProtocolEntry | not-accessible | mandatory | Information about a particular protocol. |
| 1.3.6.1.4.1.23.2.27.10.4.1.1 | ColumnnwhrProtocolName | read-only | mandatory | The protocol name, for example, IPX, IP, ARP. |
| 1.3.6.1.4.1.23.2.27.10.4.1.2 | ColumnnwhrProtocolID | read-only | mandatory | The protocol identifier For example: 000000000800 - IP for Ethernet II 00080007809B - AppleTalk for Ethernet SNAP |
| 1.3.6.1.4.1.23.2.27.10.4.1.3 | ColumnnwhrProtocolAddress | read-only | mandatory | This object provides protocol address information, for example, the Network Address on IPX network, the IP address on IP network. Note there is no format in th… |
| 1.3.6.1.4.1.23.2.27.10.4.1.4 | ColumnnwhrProtocolOutPkts | read-only | mandatory | The total number of send packet requests made to the LSL. |
| 1.3.6.1.4.1.23.2.27.10.4.1.5 | ColumnnwhrProtocolInPkts | read-only | mandatory | The total number of incoming packets that were consumed by the protocol. |
| 1.3.6.1.4.1.23.2.27.10.4.1.6 | ColumnnwhrProtocolIgnoredPkts | read-only | mandatory | The total number of times the protocol receive handler was called with look ahead and the protocol did not return a receive ECB to the MLID to receive the pack… |
| 1.3.6.1.4.1.23.2.27.10.4.1.7 | ColumnnwhrProtocolFullName | read-only | mandatory | The full name of the protocol name, for example, 'DOD Internet Protocol'. |
| 1.3.6.1.4.1.23.2.27.10.5 | TablenwhrIfTable | not-accessible | mandatory | Extensions to MIB-II's Interfaces table to add some NetWare specific info. |
| 1.3.6.1.4.1.23.2.27.10.5.1 | RownwhrIfEntry | not-accessible | mandatory | NetWare specific info for a particular interface. |
| 1.3.6.1.4.1.23.2.27.10.5.1.1 | ColumnnwhrIfLogicalBoardNumber | read-only | mandatory | The logical board number. |
| 1.3.6.1.4.1.23.2.27.10.5.1.2 | ColumnnwhrIfFrameType | read-only | mandatory | The frame type for this logical board. |
| 1.3.6.1.4.1.23.2.27.10.5.1.3 | ColumnnwhrIfLogicalBoardName | read-only | mandatory | The name assigned to this logical board. |