OA-APS-MIB
36 objects
This management information module supports the configuration and management of the OTN-APS functionality.
Imported Objects
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | enterprises Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926 | Nodeoaccess | |||
| 1.3.6.1.4.1.6926.1 | NodeoaManagement | |||
| 1.3.6.1.4.1.6926.1.41 | NodeoaLambdaDriver | |||
| 1.3.6.1.4.1.6926.1.41.20 | IdentityoaApsMIB | This management information module supports the configuration and management of the OTN-APS functionality. | ||
| 1.3.6.1.4.1.6926.1.41.20.1 | NodeoaApsConfig | |||
| 1.3.6.1.4.1.6926.1.41.20.1.1 | TableoaApsModeConfigTable | not-accessible | current | The APS Mode Configuration Table. |
| 1.3.6.1.4.1.6926.1.41.20.1.1.1 | RowoaApsModeConfigEntry | not-accessible | current | An entry in the APS Configuration table. |
| 1.3.6.1.4.1.6926.1.41.20.1.1.1.1 | ColumnoaApsModeConfigSlotIndex | not-accessible | current | The slot#. An index from 1 to The number of slots. |
| 1.3.6.1.4.1.6926.1.41.20.1.1.1.2 | ColumnoaApsModeConfigMode | read-write | current | APS global mode. noAps - APS is disabled. apsProtect - APS is enabled. |
| 1.3.6.1.4.1.6926.1.41.20.1.1.1.3 | ColumnoaApsModeConfigRevert | read-write | current | The revertive mode of APS. nonRevertive Traffic remains on the protection line until another switch request is received. revertive When the condition that caus… |
| 1.3.6.1.4.1.6926.1.41.20.1.1.1.4 | ColumnoaApsModeConfigWaitToRestore | read-write | current | The Wait To Restore period in seconds. This field only applies if revertive mode is enabled, otherwise this value is ignored. After clearing of a condition tha… |
| 1.3.6.1.4.1.6926.1.41.20.1.1.1.5 | ColumnoaApsModeConfigGroups | read-only | current | The count of APS groups. This count includes all rows in ApsModeConfigTable. |
| 1.3.6.1.4.1.6926.1.41.20.1.1.1.6 | ColumnoaApsModeVersion | read-only | current | APS version. Starts from value '2'. Indicates the APS version used in the Module. APS version should be updated upon any change of implementation. |
| 1.3.6.1.4.1.6926.1.41.20.1.5 | TableoaApsConfigGroupTable | not-accessible | current | The APS Groups Configuration table. If OTN Module is working in the Topology Mode 'BiDirectional' 4 groups exist. Each group relates to one of the 4 ODU-1 entr… |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1 | RowoaApsConfigGroupEntry | not-accessible | current | An entry in the APS Groups Configuration table. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.1 | ColumnoaApsConfigGroupSlotIndex | not-accessible | current | The slot#. An index from 1 to The number of slots. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.2 | ColumnoaApsConfigGroupId | not-accessible | current | Index of the APS group. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.3 | ColumnoaApsConfigGroupName | read-only | current | A textual name for the APS group. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.4 | ColumnoaApsConfigGroupPortMembers | read-only | current | List of access ports belonging to that group. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.5 | ColumnoaApsConfigGroupWorkingLinePort | read-only | current | Index of working line-port (wdm-trunk). |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.6 | ColumnoaApsConfigGroupProtectLinePort | read-only | current | Index of protected line-port (wdm-trunk). |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.7 | ColumnoaApsConfigGroupWorkingStatus | read-only | current | Status of the working line-port (wdm-trunk). inActive - Line port is not operational. active - Line port is operational. For BiDirectional mode both Rx & Tx be… |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.8 | ColumnoaApsConfigGroupProtectStatus | read-only | current | Status of the working line-port (wdm-trunk). inActive - Line port is not operational. active - Line port is operational. For BiDirectional mode both Rx & Tx be… |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.9 | ColumnoaApsConfigGroupCmdSwitchTrans | read-write | current | Initiate switch command on an APS group. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.10 | ColumnoaApsConfigGroupCmdSwitchRec | read-only | current | Current APS group switch command that was received. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.11 | ColumnoaApsConfigGroupCmdSwitchStatus | read-only | current | Current APS group switch command status. |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.12 | ColumnoaApsConfigGroupWorkingLineDefect | read-only | current | This variable indicates the status of Defects occured in the Working Line Interface. Each Bit in the value represents the corresponding Defect. The whole value… |
| 1.3.6.1.4.1.6926.1.41.20.1.5.1.13 | ColumnoaApsConfigGroupProtectLineDefect | read-only | current | This variable indicates the status of Defects occured in the Protected Line Interface. Each Bit in the value represents the corresponding Defect. The whole val… |
| 1.3.6.1.4.1.6926.1.41.20.2 | NodeoaApsMIBNotifications | |||
| 1.3.6.1.4.1.6926.1.41.20.3 | NodeoaApsMIBConformance | |||
| 1.3.6.1.4.1.6926.1.41.20.3.1 | NodeoaApsMIBCompliances | |||
| 1.3.6.1.4.1.6926.1.41.20.3.1.1 | ComplianceoaApsMIBCompliance | current | The core compliance statement for all 'oaApsMib' MIB implementations. | |
| 1.3.6.1.4.1.6926.1.41.20.3.2 | NodeoaApsMIBGroups | |||
| 1.3.6.1.4.1.6926.1.41.20.3.2.1 | GroupoaApsMibMandatoryConfigMode | current | Mandatory objects for APS global parameters. | |
| 1.3.6.1.4.1.6926.1.41.20.3.2.2 | GroupoaApsMibMandatoryConfigGroupMode | current | Mandatory objects for APS global parameters. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ApsSwitchCommand | INTEGER { noCmd(1), clear(2), lockoutOfProtection(3), forcedSwitchWorkToProtect(4), forcedSwitchProtectToWork(5), manualSwitchWorkToProtect(6), manualSwitchProtectToWork(7) } | current | An Aps switch command allows a user to perform protection switch actions. The Switch command values are: noCmd This value should be returned by a read request when no switch command has been written to the object in que… |