MIB Viewer

OA-ETHERNET-OAM-MIB

216 objects
Supports groups of IEEE 802.1ag and ITU-T Y.1731
Imported Objects
OS-COMMON-TC-MIBMepList nbSwitchG1Il
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter64 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime MacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.629.1.50.17IdentitynbEthOamSupports groups of IEEE 802.1ag and ITU-T Y.1731
1.3.6.1.4.1.629.1.50.17.0NodenbEthOamNotifications
1.3.6.1.4.1.629.1.50.17.0.1NotificationnbEthOamCcmAlarmcurrentA MEP has a persistent defect condition. A notification (fault alarm) is sent to the management entity with the OID of the MEP that has detected the fault. Whe…
1.3.6.1.4.1.629.1.50.17.0.4NotificationnbEthOamFdAlarmcurrentFrame delay trap.
1.3.6.1.4.1.629.1.50.17.0.8NotificationnbEthOamSDJittAlarmcurrentFrame delay trap.
1.3.6.1.4.1.629.1.50.17.0.14NotificationnbEthOamDSJittAlarmcurrentFrame delay trap.
1.3.6.1.4.1.629.1.50.17.0.20NotificationnbEthOamPcktLossAlarmcurrentPacket loss trap.
1.3.6.1.4.1.629.1.50.17.1NodenbEthOamCapabilities
1.3.6.1.4.1.629.1.50.17.1.1ScalarnbEthOamFeaturesSupportread-onlycurrentIndicates features, that supported by this agent. Additionally this object serves as a SupportValue
1.3.6.1.4.1.629.1.50.17.1.2ScalarnbEthOamCcmIntervalsread-onlycurrentIndicates supported values of CCM intervals (Dot1agCfmCcmInterval).
1.3.6.1.4.1.629.1.50.17.10NodenbEthOamLb
1.3.6.1.4.1.629.1.50.17.10.1TablenbEthOamLbConfTablenot-accessiblecurrentEthernet OAM Loopback configuration table.
1.3.6.1.4.1.629.1.50.17.10.1.1RownbEthOamLbConfEntrynot-accessiblecurrentContains configuration of Ethernet OAM Loopback.
1.3.6.1.4.1.629.1.50.17.10.1.1.1ColumnnbEthOamMdIndexnot-accessiblecurrentThe Maintenance Domain level plus 1
1.3.6.1.4.1.629.1.50.17.10.1.1.2ColumnnbEthOamMaIndexnot-accessiblecurrentThe Maintenance Association index.
1.3.6.1.4.1.629.1.50.17.10.1.1.3ColumnnbEthOamMepIdentifiernot-accessiblecurrentSource MEP for the Loopback test
1.3.6.1.4.1.629.1.50.17.10.1.1.5ColumnnbEthOamLbConfHistorySizeread-writecurrentNumber of entries in the History Table that contains records of the Loopback results.
1.3.6.1.4.1.629.1.50.17.10.1.1.6ColumnnbEthOamLbConfIntervalread-writecurrentInter-frame delay between transmitting of Loopback frames to the destination
1.3.6.1.4.1.629.1.50.17.10.1.1.7ColumnnbEthOamLbConfTimeoutread-writecurrentTimeout for the arrival of Loopback reply
1.3.6.1.4.1.629.1.50.17.10.1.1.8ColumnnbEthOamLbConfDataLengthread-writecurrentLoopback message data length. Used to send Loopback messages in different lengths
1.3.6.1.4.1.629.1.50.17.10.1.1.9ColumnnbEthOamLbConfDataFillread-writecurrentLoopback message data fill pattern
1.3.6.1.4.1.629.1.50.17.10.1.1.10ColumnnbEthOamLbConfPriorityread-writecurrentDiffserv level for the Loopback message. The value '8' means 'default'.
1.3.6.1.4.1.629.1.50.17.10.1.1.11ColumnnbEthOamLbConfDestMepIdread-writecurrentDestination MEP Identifier (1 - 4095). 0 if MEP is identified by destination MAC in nbEthOamLbConfDestMepMac object.
1.3.6.1.4.1.629.1.50.17.10.1.1.12ColumnnbEthOamLbConfDestMepMacread-writecurrentDestination MEP MAC address instead of MEP ID
1.3.6.1.4.1.629.1.50.17.10.1.1.13ColumnnbEthOamLbConfDestIsMepIdread-writecurrentFlag indicating if the destination is specified by destination MEP ID, by destination MAC address or by list of destination MEP IDs.
1.3.6.1.4.1.629.1.50.17.10.1.1.14ColumnnbEthOamLbConfMessagesread-writecurrentThe number of Loopback messages to send
1.3.6.1.4.1.629.1.50.17.10.1.1.15ColumnnbEthOamLbConfBurstIntervalread-writecurrentInterval between bursts.
1.3.6.1.4.1.629.1.50.17.10.1.1.16ColumnnbEthOamLbConfNumberOfBurstsread-writecurrentNumber of bursts in the test. 0 for continuous transmission
1.3.6.1.4.1.629.1.50.17.10.1.1.21ColumnnbEthOamLbConfRunMethodread-writecurrentThe method of the test
1.3.6.1.4.1.629.1.50.17.10.1.1.22ColumnnbEthOamLbConfIntervalMicroread-writecurrentInter-frame delay between transmitting of Loopback frames to the destination
1.3.6.1.4.1.629.1.50.17.10.2TablenbEthOamLbHistTablenot-accessiblecurrentEthernet OAM Loopback results history table.
1.3.6.1.4.1.629.1.50.17.10.2.1RownbEthOamLbHistEntrynot-accessiblecurrentContains results of Ethernet OAM Loopback test.
1.3.6.1.4.1.629.1.50.17.10.2.1.5ColumnnbEthOamLbHistSampleIndexnot-accessiblecurrentAn index that uniquely identifies the sample. This index starts at 1 and increases by one as each new sample is taken.
1.3.6.1.4.1.629.1.50.17.10.2.1.6ColumnnbEthOamLbHistStartedread-onlycurrentTimestamp indicating when the Loopback test started.
1.3.6.1.4.1.629.1.50.17.10.2.1.7ColumnnbEthOamLbHistDestMepIdread-onlycurrentDestination MEP ID used in the Loopback test or 0 if destination is specified by MAC address
1.3.6.1.4.1.629.1.50.17.10.2.1.8ColumnnbEthOamLbHistDestMepMacread-onlycurrentDestination MEP MAC address used in the Loopback test
1.3.6.1.4.1.629.1.50.17.10.2.1.9ColumnnbEthOamLbHistMsgTransmittedread-onlycurrentNumber of Loopback messages transmitted
1.3.6.1.4.1.629.1.50.17.10.2.1.10ColumnnbEthOamLbHistMsgReceivedread-onlycurrentNumber of Loopback replies received.
1.3.6.1.4.1.629.1.50.17.10.2.1.12ColumnnbEthOamLbHistRttMinread-onlycurrentMinimum Round Trip Time result.
1.3.6.1.4.1.629.1.50.17.10.2.1.13ColumnnbEthOamLbHistRttMaxread-onlycurrentMaximum Round Trip Time result.
1.3.6.1.4.1.629.1.50.17.10.2.1.14ColumnnbEthOamLbHistRttAverageread-onlycurrentAverage of Round Trip Time results.
1.3.6.1.4.1.629.1.50.17.10.2.1.15ColumnnbEthOamLbHistRttSum2read-onlycurrentThe sum of squares of all Round Trip Time results.
1.3.6.1.4.1.629.1.50.17.10.2.1.23ColumnnbEthOamLbHistJittNumberread-onlycurrentThe number of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.2.1.24ColumnnbEthOamLbHistJittMinread-onlycurrentThe minimum value of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.2.1.25ColumnnbEthOamLbHistJittMaxread-onlycurrentThe maximum value of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.2.1.26ColumnnbEthOamLbHistJittAverageread-onlycurrentThe average of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.2.1.27ColumnnbEthOamLbHistJittSum2read-onlycurrentThe sum of squares of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.2.1.30ColumnnbEthOamLbHistJittIAread-onlycurrentThe calculation of Interarrival Jitter for Loopback
1.3.6.1.4.1.629.1.50.17.10.2.1.31ColumnnbEthOamLbHistPcktLossread-onlycurrentThe calculation of packet loss value.
1.3.6.1.4.1.629.1.50.17.10.2.1.32ColumnnbEthOamLbHistTyperead-onlycurrentThe type of executed Loopback test.
1.3.6.1.4.1.629.1.50.17.10.2.1.33ColumnnbEthOamLbHistPriorityread-onlycurrentDiffserv level of the Loopback messages.
1.3.6.1.4.1.629.1.50.17.10.3TablenbEthOamLbLastTablenot-accessiblecurrentEthernet OAM Loopback last completed test results Table.
1.3.6.1.4.1.629.1.50.17.10.3.1RownbEthOamLbLastEntrynot-accessiblecurrentContains results of Ethernet OAM Loopback test.
1.3.6.1.4.1.629.1.50.17.10.3.1.6ColumnnbEthOamLbLastStartedread-onlycurrentTimestamp indicating when the Loopback test started.
1.3.6.1.4.1.629.1.50.17.10.3.1.7ColumnnbEthOamLbLastDestMepIdread-onlycurrentDestination MEP ID used in the Loopback test or 0 if destination is specified by MAC address
1.3.6.1.4.1.629.1.50.17.10.3.1.8ColumnnbEthOamLbLastDestMepMacread-onlycurrentDestination MEP MAC address used in the Loopback test
1.3.6.1.4.1.629.1.50.17.10.3.1.9ColumnnbEthOamLbLastMsgTransmittedread-onlycurrentNumber of Loopback messages transmitted
1.3.6.1.4.1.629.1.50.17.10.3.1.10ColumnnbEthOamLbLastMsgReceivedread-onlycurrentNumber of Loopback replies received.
1.3.6.1.4.1.629.1.50.17.10.3.1.12ColumnnbEthOamLbLastRttMinread-onlycurrentMinimum Round Trip Time result.
1.3.6.1.4.1.629.1.50.17.10.3.1.13ColumnnbEthOamLbLastRttMaxread-onlycurrentMaximum Round Trip Time result.
1.3.6.1.4.1.629.1.50.17.10.3.1.14ColumnnbEthOamLbLastRttAverageread-onlycurrentAverage of Round Trip Time results.
1.3.6.1.4.1.629.1.50.17.10.3.1.15ColumnnbEthOamLbLastRttSum2read-onlycurrentThe sum of squares of all Round Trip Time results.
1.3.6.1.4.1.629.1.50.17.10.3.1.23ColumnnbEthOamLbLastJittNumberread-onlycurrentThe number of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.3.1.24ColumnnbEthOamLbLastJittMinread-onlycurrentThe minimum value of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.3.1.25ColumnnbEthOamLbLastJittMaxread-onlycurrentThe maximum value of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.3.1.26ColumnnbEthOamLbLastJittAverageread-onlycurrentThe average of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.3.1.27ColumnnbEthOamLbLastJittSum2read-onlycurrentThe sum of squares of all positive jitter values.
1.3.6.1.4.1.629.1.50.17.10.3.1.30ColumnnbEthOamLbLastJittIAread-onlycurrentThe calculation of Interarrival Jitter for Loopback
1.3.6.1.4.1.629.1.50.17.10.3.1.31ColumnnbEthOamLbLastPcktLossread-onlycurrentThe calculation of packet loss value.
1.3.6.1.4.1.629.1.50.17.10.3.1.32ColumnnbEthOamLbLastTyperead-onlycurrentThe type of executed Loopback test.
1.3.6.1.4.1.629.1.50.17.10.3.1.33ColumnnbEthOamLbLastPriorityread-onlycurrentDiffserv level for the Loopback message.
1.3.6.1.4.1.629.1.50.17.10.3.1.50ColumnnbEthOamLbLastHistIndxread-onlycurrentCorresponding nbEthOamLbHistSampleIndex.
1.3.6.1.4.1.629.1.50.17.10.4TablenbEthOamLbConfExtTablenot-accessiblecurrentEthernet OAM Loopback configuration table.
1.3.6.1.4.1.629.1.50.17.10.4.1RownbEthOamLbConfExtEntrynot-accessiblecurrentContains configuration of Ethernet OAM Loopback.
1.3.6.1.4.1.629.1.50.17.10.4.1.12ColumnnbEthOamLbConfDestMepListread-writecurrentList of destination MEP IDs.
1.3.6.1.4.1.629.1.50.17.11NodenbEthOamDm
1.3.6.1.4.1.629.1.50.17.11.1TablenbEthOamDmConfTablenot-accessiblecurrentEthernet OAM Delay Measurement configuration table
1.3.6.1.4.1.629.1.50.17.11.1.1RownbEthOamDmConfEntrynot-accessiblecurrentContains configuration of Ethernet OAM Delay Measurement test.
1.3.6.1.4.1.629.1.50.17.11.1.1.5ColumnnbEthOamDmConfHistorySizeread-writecurrentNumber of entries in the History Table that contains records of the Delay Measurement results
1.3.6.1.4.1.629.1.50.17.11.1.1.6ColumnnbEthOamDmConfIntervalread-writecurrentInter-frame delay between transmitting of Delay Measurement Messages to the destination
1.3.6.1.4.1.629.1.50.17.11.1.1.7ColumnnbEthOamDmConfTimeoutread-writecurrentTimeout for the arrival of Delay Measurement Reply
1.3.6.1.4.1.629.1.50.17.11.1.1.8ColumnnbEthOamDmConfDataLengthread-writecurrentDelay Measurement message data length. Used to send Delay Measurement messages in different lengths
1.3.6.1.4.1.629.1.50.17.11.1.1.9ColumnnbEthOamDmConfDataFillread-writecurrentDelay Measurement message data fill pattern
1.3.6.1.4.1.629.1.50.17.11.1.1.10ColumnnbEthOamDmConfPriorityread-writecurrentDiffserv level for the Delay Measurement message. The value '8' means 'default'.
1.3.6.1.4.1.629.1.50.17.11.1.1.11ColumnnbEthOamDmConfDestMepIdread-writecurrentDestination MEP Identifier. 0 if MEP is identified by destination MAC (nbEthOamDmConfDestMepMac).
1.3.6.1.4.1.629.1.50.17.11.1.1.12ColumnnbEthOamDmConfDestMepMacread-writecurrentDestination MEP MAC address instead of MEP ID.
1.3.6.1.4.1.629.1.50.17.11.1.1.13ColumnnbEthOamDmConfDestIsMepIdread-writecurrentFlag indicating if the destination is specified by destination MEP ID, by destination MAC address or by list of destination MEP IDs.
1.3.6.1.4.1.629.1.50.17.11.1.1.14ColumnnbEthOamDmConfMessagesread-writecurrentThe number of Delay Measurement messages to send.
1.3.6.1.4.1.629.1.50.17.11.1.1.15ColumnnbEthOamDmConfBurstIntervalread-writecurrentInterval between bursts.
1.3.6.1.4.1.629.1.50.17.11.1.1.16ColumnnbEthOamDmConfNumberOfBurstsread-writecurrentNumber of bursts in the test. 0 for continuous transmission.
1.3.6.1.4.1.629.1.50.17.11.1.1.21ColumnnbEthOamDmConfRunMethodread-writecurrentThe method of the test
1.3.6.1.4.1.629.1.50.17.11.1.1.22ColumnnbEthOamDmConfIntervalMicroread-writecurrentInter-frame delay between transmitting of Delay Measurement Messages to the destination
1.3.6.1.4.1.629.1.50.17.11.2TablenbEthOamDmHistTablenot-accessiblecurrentEthernet OAM Delay Measurement results history Table.
1.3.6.1.4.1.629.1.50.17.11.2.1RownbEthOamDmHistEntrynot-accessiblecurrentContains results of Ethernet OAM Delay Measurement test.
1.3.6.1.4.1.629.1.50.17.11.2.1.5ColumnnbEthOamDmHistSampleIndexnot-accessiblecurrentAn index that uniquely identifies the sample. This index starts at 1 and increases by one as each new sample is taken.
1.3.6.1.4.1.629.1.50.17.11.2.1.6ColumnnbEthOamDmHistStartedread-onlycurrentTimestamp indicating when the Delay Measurement test started.
1.3.6.1.4.1.629.1.50.17.11.2.1.7ColumnnbEthOamDmHistDestMepIdread-onlycurrentDestination MEP ID or 0 if destination is specified by MAC address
1.3.6.1.4.1.629.1.50.17.11.2.1.8ColumnnbEthOamDmHistDestMepMacread-onlycurrentDestination MEP MAC address used in the Delay Measurement test
1.3.6.1.4.1.629.1.50.17.11.2.1.9ColumnnbEthOamDmHistMsgTransmittedread-onlycurrentNumber of Delay Measurement messages transmitted
1.3.6.1.4.1.629.1.50.17.11.2.1.10ColumnnbEthOamDmHistMsgReceivedread-onlycurrentNumber of Delay Measurement messages received
1.3.6.1.4.1.629.1.50.17.11.2.1.12ColumnnbEthOamDmHistRttMinread-onlycurrentMinimum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.2.1.13ColumnnbEthOamDmHistRttMaxread-onlycurrentMaximum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.2.1.14ColumnnbEthOamDmHistRttAverageread-onlycurrentAverage of Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.2.1.15ColumnnbEthOamDmHistRttSum2read-onlycurrentThe sum of squares of all Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.2.1.23ColumnnbEthOamDmHistDSJittNumberread-onlycurrentThe number of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.2.1.24ColumnnbEthOamDmHistDSJittMinread-onlycurrentThe minimum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.2.1.25ColumnnbEthOamDmHistDSJittMaxread-onlycurrentThe maximum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.2.1.26ColumnnbEthOamDmHistDSJittAverageread-onlycurrentThe average of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.2.1.27ColumnnbEthOamDmHistDSJittSum2read-onlycurrentThe sum of square of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.2.1.30ColumnnbEthOamDmHistDSJittIAread-onlycurrentThe calculation of Interarrival Jitter from destination to source.
1.3.6.1.4.1.629.1.50.17.11.2.1.36ColumnnbEthOamDmHistSDJittNumberread-onlycurrentThe number of all positive jitter values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.2.1.37ColumnnbEthOamDmHistSDJittMinread-onlycurrentThe minimum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.2.1.38ColumnnbEthOamDmHistSDJittMaxread-onlycurrentThe maximum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.2.1.39ColumnnbEthOamDmHistSDJittAverageread-onlycurrentThe Average of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.2.1.40ColumnnbEthOamDmHistSDJittSum2read-onlycurrentThe sum of squares of all positive jitter values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.2.1.41ColumnnbEthOamDmHistSDJittIAread-onlycurrentThe calculation of Interarrival Jitter from source to destination.
1.3.6.1.4.1.629.1.50.17.11.2.1.42ColumnnbEthOamDmHistPcktLossread-onlycurrentThe calculation of packet loss value.
1.3.6.1.4.1.629.1.50.17.11.2.1.43ColumnnbEthOamDmHistTyperead-onlycurrentThe type of executed Delay Measurement test.
1.3.6.1.4.1.629.1.50.17.11.2.1.44ColumnnbEthOamDmHistPriorityread-onlycurrentDiffserv level for the Delay Measurement message.
1.3.6.1.4.1.629.1.50.17.11.3TablenbEthOamDmLastTablenot-accessiblecurrentEthernet OAM Delay Measurement last completed test results Table.
1.3.6.1.4.1.629.1.50.17.11.3.1RownbEthOamDmLastEntrynot-accessiblecurrentContains results of Ethernet OAM Delay Measurement test.
1.3.6.1.4.1.629.1.50.17.11.3.1.6ColumnnbEthOamDmLastStartedread-onlycurrentTimestamp indicating when the Delay Measurement test started.
1.3.6.1.4.1.629.1.50.17.11.3.1.7ColumnnbEthOamDmLastDestMepIdread-onlycurrentDestination MEP ID or 0 if destination is specified by MAC address
1.3.6.1.4.1.629.1.50.17.11.3.1.8ColumnnbEthOamDmLastDestMepMacread-onlycurrentDestination MEP MAC address used in the Delay Measurement test
1.3.6.1.4.1.629.1.50.17.11.3.1.9ColumnnbEthOamDmLastMsgTransmittedread-onlycurrentNumber of Delay Measurement messages transmitted
1.3.6.1.4.1.629.1.50.17.11.3.1.10ColumnnbEthOamDmLastMsgReceivedread-onlycurrentNumber of Delay Measurement messages received
1.3.6.1.4.1.629.1.50.17.11.3.1.12ColumnnbEthOamDmLastRttMinread-onlycurrentMinimum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.3.1.13ColumnnbEthOamDmLastRttMaxread-onlycurrentMaximum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.3.1.14ColumnnbEthOamDmLastRttAverageread-onlycurrentAverage of Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.3.1.15ColumnnbEthOamDmLastRttSum2read-onlycurrentThe sum of squares of all Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.3.1.23ColumnnbEthOamDmLastDSJittNumberread-onlycurrentThe number of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.3.1.24ColumnnbEthOamDmLastDSJittMinread-onlycurrentThe minimum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.3.1.25ColumnnbEthOamDmLastDSJittMaxread-onlycurrentThe maximum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.3.1.26ColumnnbEthOamDmLastDSJittAverageread-onlycurrentThe average of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.3.1.27ColumnnbEthOamDmLastDSJittSum2read-onlycurrentThe sum of square of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.3.1.30ColumnnbEthOamDmLastDSJittIAread-onlycurrentThe calculation of Interarrival Jitter from destination to source.
1.3.6.1.4.1.629.1.50.17.11.3.1.36ColumnnbEthOamDmLastSDJittNumberread-onlycurrentThe number of all positive jitter values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.3.1.37ColumnnbEthOamDmLastSDJittMinread-onlycurrentThe minimum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.3.1.38ColumnnbEthOamDmLastSDJittMaxread-onlycurrentThe maximum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.3.1.39ColumnnbEthOamDmLastSDJittAverageread-onlycurrentThe Average of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.3.1.40ColumnnbEthOamDmLastSDJittSum2read-onlycurrentThe sum of squares of all positive jitter values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.3.1.41ColumnnbEthOamDmLastSDJittIAread-onlycurrentThe calculation of Interarrival Jitter from source to destination.
1.3.6.1.4.1.629.1.50.17.11.3.1.42ColumnnbEthOamDmLastPcktLossread-onlycurrentThe calculation of packet loss value.
1.3.6.1.4.1.629.1.50.17.11.3.1.43ColumnnbEthOamDmLastTyperead-onlycurrentThe type of executed Delay Measurement test.
1.3.6.1.4.1.629.1.50.17.11.3.1.44ColumnnbEthOamDmLastPriorityread-onlycurrentDiffserv level for the Delay Measurement message.
1.3.6.1.4.1.629.1.50.17.11.3.1.50ColumnnbEthOamDmLastHistIndxread-onlycurrentCorresponding nbEthOamDmHistSampleIndex.
1.3.6.1.4.1.629.1.50.17.11.4TablenbEthOamDmConfExtTablenot-accessiblecurrentEthernet OAM Delay Measurement configuration table.
1.3.6.1.4.1.629.1.50.17.11.4.1RownbEthOamDmConfExtEntrynot-accessiblecurrentContains configuration of Ethernet OAM Delay Measurement.
1.3.6.1.4.1.629.1.50.17.11.4.1.12ColumnnbEthOamDmConfDestMepListread-writecurrentList of destination MEP IDs.
1.3.6.1.4.1.629.1.50.17.11.5TablenbEthOamDmHcHistTablenot-accessiblecurrentEthernet OAM Delay Measurement high capacity results history Table.
1.3.6.1.4.1.629.1.50.17.11.5.1RownbEthOamDmHcHistEntrynot-accessiblecurrentContains high capacity results of Ethernet OAM Delay Measurement test.
1.3.6.1.4.1.629.1.50.17.11.5.1.12ColumnnbEthOamDmHcHistRttMinread-onlycurrentMinimum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.5.1.13ColumnnbEthOamDmHcHistRttMaxread-onlycurrentMaximum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.5.1.14ColumnnbEthOamDmHcHistRttAverageread-onlycurrentAverage of Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.5.1.15ColumnnbEthOamDmHcHistRttSum2read-onlycurrentThe sum of squares of all Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.5.1.24ColumnnbEthOamDmHcHistDSJittMinread-onlycurrentThe minimum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.5.1.25ColumnnbEthOamDmHcHistDSJittMaxread-onlycurrentThe maximum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.5.1.26ColumnnbEthOamDmHcHistDSJittAverageread-onlycurrentThe average of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.5.1.27ColumnnbEthOamDmHcHistDSJittSum2read-onlycurrentThe sum of square of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.5.1.30ColumnnbEthOamDmHcHistDSJittIAread-onlycurrentThe calculation of Interarrival Jitter from destination to source.
1.3.6.1.4.1.629.1.50.17.11.5.1.37ColumnnbEthOamDmHcHistSDJittMinread-onlycurrentThe minimum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.5.1.38ColumnnbEthOamDmHcHistSDJittMaxread-onlycurrentThe maximum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.5.1.39ColumnnbEthOamDmHcHistSDJittAverageread-onlycurrentThe Average of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.5.1.40ColumnnbEthOamDmHcHistSDJittSum2read-onlycurrentThe sum of squares of all positive jitter values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.5.1.41ColumnnbEthOamDmHcHistSDJittIAread-onlycurrentThe calculation of Interarrival Jitter from source to destination.
1.3.6.1.4.1.629.1.50.17.11.6TablenbEthOamDmHcLastTablenot-accessiblecurrentEthernet OAM Delay Measurement last completed test high capacity results Table.
1.3.6.1.4.1.629.1.50.17.11.6.1RownbEthOamDmHcLastEntrynot-accessiblecurrentContains high capacity results of Ethernet OAM Delay Measurement test.
1.3.6.1.4.1.629.1.50.17.11.6.1.12ColumnnbEthOamDmHcLastRttMinread-onlycurrentMinimum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.6.1.13ColumnnbEthOamDmHcLastRttMaxread-onlycurrentMaximum Round Trip Time result
1.3.6.1.4.1.629.1.50.17.11.6.1.14ColumnnbEthOamDmHcLastRttAverageread-onlycurrentAverage of Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.6.1.15ColumnnbEthOamDmHcLastRttSum2read-onlycurrentThe sum of squares of all Round Trip Time results
1.3.6.1.4.1.629.1.50.17.11.6.1.24ColumnnbEthOamDmHcLastDSJittMinread-onlycurrentThe minimum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.6.1.25ColumnnbEthOamDmHcLastDSJittMaxread-onlycurrentThe maximum of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.6.1.26ColumnnbEthOamDmHcLastDSJittAverageread-onlycurrentThe average of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.6.1.27ColumnnbEthOamDmHcLastDSJittSum2read-onlycurrentThe sum of square of all positive jitter values from destination to source.
1.3.6.1.4.1.629.1.50.17.11.6.1.30ColumnnbEthOamDmHcLastDSJittIAread-onlycurrentThe calculation of Interarrival Jitter from destination to source.
1.3.6.1.4.1.629.1.50.17.11.6.1.37ColumnnbEthOamDmHcLastSDJittMinread-onlycurrentThe minimum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.6.1.38ColumnnbEthOamDmHcLastSDJittMaxread-onlycurrentThe maximum of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.6.1.39ColumnnbEthOamDmHcLastSDJittAverageread-onlycurrentThe Average of negative jitter absolute values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.6.1.40ColumnnbEthOamDmHcLastSDJittSum2read-onlycurrentThe sum of squares of all positive jitter values from source to destination.
1.3.6.1.4.1.629.1.50.17.11.6.1.41ColumnnbEthOamDmHcLastSDJittIAread-onlycurrentThe calculation of Interarrival Jitter from source to destination.
1.3.6.1.4.1.629.1.50.17.11.6.1.59ColumnnbEthOamDmHcLastRunStatusread-onlycurrentCorresponding nbEthOamDmHistSampleIndex.
1.3.6.1.4.1.629.1.50.17.16TablenbEthOamServiceTablenot-accessiblecurrentEthernet OAM Service configuration table.
1.3.6.1.4.1.629.1.50.17.16.1RownbEthOamServiceEntrynot-accessiblecurrentContains configuration of Ethernet OAM Service.
1.3.6.1.4.1.629.1.50.17.16.1.20ColumnnbEthOamServiceDmResponderSLread-writecurrentService Level (1-8) for reply messages of OAM Delay Measurement protocol. 0 - use default
1.3.6.1.4.1.629.1.50.17.16.1.21ColumnnbEthOamServiceLbResponderSLread-writecurrentService Level (1-8) for reply messages of OAM Loopback protocol 0 - use default
1.3.6.1.4.1.629.1.50.17.16.1.22ColumnnbEthOamServiceLmResponderSLread-writecurrentService Level (1-8) for reply messages of OAM Loss Measurement protocol 0 - use default
1.3.6.1.4.1.629.1.50.17.20TablenbEthOamTrapTablenot-accessiblecurrentEthernet OAM Traps table.
1.3.6.1.4.1.629.1.50.17.20.1RownbEthOamTrapEntrynot-accessiblecurrentContains configuration of Ethernet OAM trap.
1.3.6.1.4.1.629.1.50.17.20.1.1ColumnnbEthOamTrapTrapGenerationread-writecurrentThe value of this object determines if to generate different types of notifications for this MEP: ccmRecovery(0) - Generate a nbEthOamCcmAlarm notification whe…
1.3.6.1.4.1.629.1.50.17.20.1.2ColumnnbEthOamTrapCcmHighestPrDefectread-onlycurrentCopied from dot1agCfmMepHighestPrDefect of dot1ag.mib. The highest priority defect that has been present since the MEPs Fault Notification Generator State Mach…
1.3.6.1.4.1.629.1.50.17.20.1.3ColumnnbEthOamTrapCcmAlarmTyperead-onlycurrentType of last generated nbEthOamCcmAlarm.
1.3.6.1.4.1.629.1.50.17.20.1.30ColumnnbEthOamTrapDmmReasonread-onlycurrent.
1.3.6.1.4.1.629.1.50.17.20.1.35ColumnnbEthOamFdRiseTholdread-writecurrentFrame delay (Average of Round Trip Time) Rising threashold. Value 0 means, that this the agent will not check this tipe of threashold.
1.3.6.1.4.1.629.1.50.17.20.1.36ColumnnbEthOamFdFallTholdread-writecurrentFrame delay (Average of Round Trip Time) Falling threashold
1.3.6.1.4.1.629.1.50.17.20.1.49ColumnnbEthOamDSJittRiseTholdread-writecurrentDestination-Source positive jitter Rising threashold. Value 0 means, that this the agent will not check this tipe of threashold.
1.3.6.1.4.1.629.1.50.17.20.1.50ColumnnbEthOamDSJittFallTholdread-writecurrentDestination-Source positive jitter Falling threashold.
1.3.6.1.4.1.629.1.50.17.20.1.51ColumnnbEthOamDSJittSum2RiseTholdread-writecurrentThe sum of squares of all Destination-Source positive jitters Rising threashold. Value 0 means, that this the agent will not check this tipe of threashold.
1.3.6.1.4.1.629.1.50.17.20.1.52ColumnnbEthOamDSJittSum2FallTholdread-writecurrentThe sum of squares of all Destination-Source positive jitters Falling threashold.
1.3.6.1.4.1.629.1.50.17.20.1.63ColumnnbEthOamSDJittRiseTholdread-writecurrentSource-Destination positive jitter Rising threashold. Value 0 means, that this the agent will not check this tipe of threashold.
1.3.6.1.4.1.629.1.50.17.20.1.64ColumnnbEthOamSDJittFallTholdread-writecurrentSource-Destination positive jitter Falling threashold.
1.3.6.1.4.1.629.1.50.17.20.1.66ColumnnbEthOamSDJittSum2RiseTholdread-writecurrentThe sum of squares of all Source-Destination positive jitters Rising threashold. Value 0 means, that this the agent will not check this tipe of threashold.
1.3.6.1.4.1.629.1.50.17.20.1.67ColumnnbEthOamSDJittSum2FallTholdread-writecurrentThe sum of squares of all Source-Destination positive jitters Falling threashold.
1.3.6.1.4.1.629.1.50.17.20.1.68ColumnnbEthOamPcktLossRiseTholdread-writecurrentThe packet loss Rising threashold.
1.3.6.1.4.1.629.1.50.17.20.1.69ColumnnbEthOamPcktLossFallTholdread-writecurrentThe packet loss Falling threashold.
1.3.6.1.4.1.629.1.50.17.100NodenbEthOamConformance
1.3.6.1.4.1.629.1.50.17.100.1NodenbEthOamMIBCompliances
1.3.6.1.4.1.629.1.50.17.100.1.1CompliancenbEthOamMIBCompliancecurrentThe core compliance statement for all the implementations.
1.3.6.1.4.1.629.1.50.17.100.2NodenbEthOamMIBGroups
1.3.6.1.4.1.629.1.50.17.100.2.1GroupnbEthOamMandatoryGroupcurrent.
1.3.6.1.4.1.629.1.50.17.100.2.2GroupnbEthOamNotificationsGroupcurrentThe notification which are required to be supported by implementations of this MIB.
Type Definitions
NameSyntaxStatusDescription
DestinationTypeINTEGER { singleRMepId(1), macAddress(2), listOfRMeps (3), multicastClass1(4), multicastClass2(5) }currentDescribes type of destination used.
NbEthOamCcmHighestDefectPriINTEGER { none (0), defRDICCM (1), defMACstatus (2), defRemoteCCM (3), defErrorCCM (4), defXconCCM (5) }currentCopied from Dot1agCfmHighestDefectPri of dot1ag.mib. An enumerated value, equal to the contents of the variable highestDefect (20.33.9 and Table 20-1), indicating the highest-priority defect that has been present since …
NbEthOamMepIdUnsigned32 (1..4095)currentMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP.
NbEthOamMepIdOrZeroUnsigned32 (0|1..4095)currentMEP Identifier. 0 indicates MEP is identified by MAC in another object
TestRunMethodINTEGER { slow(2), fast(3), none(4) }currentIndicates the method of the test running: slow(2) fast(3) none(4) When the MEP operation is configured as slow(2) or fast(3), than the test is running now using this method. When the value is changed the test stops. If …
MIB Viewer