OA-QOS-MIB
45 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926 | Nodeoaccess | |||
| 1.3.6.1.4.1.6926.1 | NodeoaManagement | |||
| 1.3.6.1.4.1.6926.1.21 | NodeoaClassification | |||
| 1.3.6.1.4.1.6926.1.21.2 | NodeoaQoS | |||
| 1.3.6.1.4.1.6926.1.21.2.1 | ScalaroaQoSSaveMode | read-write | mandatory | Save whole QoS feature Configuration in the NVRAM for the corresponding Device. In case of GET command - always responds with 1=other. In case of SET command -… |
| 1.3.6.1.4.1.6926.1.21.2.2 | ScalaroaQoSMaxPriorQueuesNumber | read-only | mandatory | Max number of priority queues in the whole Device. |
| 1.3.6.1.4.1.6926.1.21.2.3 | TableoaQoSModuleStatusTable | not-accessible | mandatory | Table of QoS Status in Modules. |
| 1.3.6.1.4.1.6926.1.21.2.3.1 | RowoaQoSModuleStatusEntry | not-accessible | mandatory | An entry in the table, containing information about the QoS Status in Module. |
| 1.3.6.1.4.1.6926.1.21.2.3.1.1 | ColumnoaQoSSlotId | read-only | mandatory | The Slot Index in the Device. |
| 1.3.6.1.4.1.6926.1.21.2.3.1.2 | ColumnoaQoSModuleId | read-only | mandatory | The Module Index in the Slot. |
| 1.3.6.1.4.1.6926.1.21.2.3.1.3 | ColumnoaQoSModuleStatus | read-only | mandatory | Status of the QoS feature in corresponding Module. In case of 1=other - module is in the other mode. In case of 2=supported - feature is supported. In case of … |
| 1.3.6.1.4.1.6926.1.21.2.10 | NodeoaQoSRun | |||
| 1.3.6.1.4.1.6926.1.21.2.10.1 | ScalaroaQoSCounterMode | read-write | mandatory | Counter Type mode. Setting this object to the value perPackets(2) causes packet accounting. Setting this object to the value perOctets(3) causes octet accounti… |
| 1.3.6.1.4.1.6926.1.21.2.10.2 | ScalaroaQoSTxSchedAlg | read-write | mandatory | Tx priority queue scheduling Algorithm. Setting this object to the value WRR(2) causes Waited-Round-Robin scheduling algorithm. Setting this object to the valu… |
| 1.3.6.1.4.1.6926.1.21.2.10.6 | TableoaQoSQParamsTable | not-accessible | mandatory | Table of Priority Queue Parameters in the Device in the QoS feature. |
| 1.3.6.1.4.1.6926.1.21.2.10.6.1 | RowoaQoSQParamsEntry | not-accessible | mandatory | An entry in the table, containing information about the Priority Queue Parameters in the Device in the QoS feature. |
| 1.3.6.1.4.1.6926.1.21.2.10.6.1.1 | ColumnoaQoSQParamsQueueNumber | read-only | mandatory | Priority Queue Number. |
| 1.3.6.1.4.1.6926.1.21.2.10.6.1.2 | ColumnoaQoSQParamsQueueWeight | read-write | mandatory | Weight value for the specific Priority Queue. |
| 1.3.6.1.4.1.6926.1.21.2.10.9 | TableoaQoSTOSCfgTable | not-accessible | mandatory | Table of TOS values used in the QoS Configuration. It represents the Service Level to TOS bits mapping. |
| 1.3.6.1.4.1.6926.1.21.2.10.9.1 | RowoaQoSTOSCfgEntry | not-accessible | mandatory | An entry in the table, containing information about Service Level to TOS bits mapping in QoS. |
| 1.3.6.1.4.1.6926.1.21.2.10.9.1.1 | ColumnoaQoSTOSServiceLevel | read-only | mandatory | Service Level |
| 1.3.6.1.4.1.6926.1.21.2.10.9.1.2 | ColumnoaQoSTOSvalue | read-write | mandatory | 6 most significant bits of the TOS value. Note, that 2 least significant bits of the TOS value are not in Use. |
| 1.3.6.1.4.1.6926.1.21.2.10.9.1.3 | ColumnoaQoSTOSvalueAfterReset | read-write | mandatory | 6 most significant bits of the TOS value that will be SET to the [oaQoSTOSvalue] and [oaQoSPermTOSvalue] Objects only after Reset Device procedure if before th… |
| 1.3.6.1.4.1.6926.1.21.2.10.9.1.4 | ColumnoaQoSTOSvalueDefault | read-only | mandatory | The default value of the 6 most significant bits of the TOS field, as proposed by QoS Assured Forwarding Standard. Note, that 2 least significant bits of the T… |
| 1.3.6.1.4.1.6926.1.21.2.10.10 | TableoaQoSVPTCfgTable | not-accessible | mandatory | Table of VPT values used in the QoS Configuration. It represents the Service Level to VPT bits mapping. |
| 1.3.6.1.4.1.6926.1.21.2.10.10.1 | RowoaQoSVPTCfgEntry | not-accessible | mandatory | An entry in the table, containing information about Service Level to VPT bits mapping in QoS. |
| 1.3.6.1.4.1.6926.1.21.2.10.10.1.1 | ColumnoaQoSVPTServiceLevel | read-only | mandatory | Service Level |
| 1.3.6.1.4.1.6926.1.21.2.10.10.1.2 | ColumnoaQoSVPTvalue | read-write | mandatory | VPT bits value. |
| 1.3.6.1.4.1.6926.1.21.2.10.10.1.3 | ColumnoaQoSVPTvalueAfterReset | read-write | mandatory | VPT bits value that will be SET to the [oaQoSVPTvalue] and [oaQoSPermVPTvalue] Objects only after Reset Device procedure if before that User creates 'Save whol… |
| 1.3.6.1.4.1.6926.1.21.2.10.10.1.4 | ColumnoaQoSVPTvalueDefault | read-only | mandatory | The default value of the VPT field, as proposed by QoS Assured Forwarding Standard. |
| 1.3.6.1.4.1.6926.1.21.2.11 | NodeoaQoSPerm | |||
| 1.3.6.1.4.1.6926.1.21.2.11.1 | ScalaroaQoSPermCounterMode | read-only | mandatory | Counter Type mode. Setting this object to the value perPackets(2) causes packet accounting. Setting this object to the value perOctets(3) causes octet accounti… |
| 1.3.6.1.4.1.6926.1.21.2.11.2 | ScalaroaQoSPermTxSchedAlg | read-only | mandatory | Tx priority queue scheduling Algorithm. Setting this object to the value WRR(2) causes Waited-Round-Robin scheduling algorithm. Setting this object to the valu… |
| 1.3.6.1.4.1.6926.1.21.2.11.6 | TableoaQoSPermQParamsTable | not-accessible | mandatory | Table of Priority Queue Parameters in the Device in the QoS feature. |
| 1.3.6.1.4.1.6926.1.21.2.11.6.1 | RowoaQoSPermQParamsEntry | not-accessible | mandatory | An entry in the table, containing information about the Priority Queue Parameters in the Device in the QoS feature. |
| 1.3.6.1.4.1.6926.1.21.2.11.6.1.1 | ColumnoaQoSPermQParamsQueueNumber | read-only | mandatory | Priority Queue Number. |
| 1.3.6.1.4.1.6926.1.21.2.11.6.1.2 | ColumnoaQoSPermQParamsQueueWeight | read-only | mandatory | Weight value for the specific Priority Queue. |
| 1.3.6.1.4.1.6926.1.21.2.11.9 | TableoaQoSPermTOSCfgTable | not-accessible | mandatory | Table of TOS values used in the QoS Configuration. It represents the Service Level to TOS bits mapping. |
| 1.3.6.1.4.1.6926.1.21.2.11.9.1 | RowoaQoSPermTOSCfgEntry | not-accessible | mandatory | An entry in the table, containing information about Service Level to TOS bits mapping in QoS. |
| 1.3.6.1.4.1.6926.1.21.2.11.9.1.1 | ColumnoaQoSPermTOSServiceLevel | read-only | mandatory | Service Level |
| 1.3.6.1.4.1.6926.1.21.2.11.9.1.2 | ColumnoaQoSPermTOSvalue | read-only | mandatory | 6 most significant bits of the TOS value. Note, that 2 least significant bits of the TOS value are not in Use. |
| 1.3.6.1.4.1.6926.1.21.2.11.10 | TableoaQoSPermVPTCfgTable | not-accessible | mandatory | Table of VPT values used in the QoS Configuration. It represents the Service Level to VPT bits mapping. |
| 1.3.6.1.4.1.6926.1.21.2.11.10.1 | RowoaQoSPermVPTCfgEntry | not-accessible | mandatory | An entry in the table, containing information about Service Level to VPT bits mapping in QoS. |
| 1.3.6.1.4.1.6926.1.21.2.11.10.1.1 | ColumnoaQoSPermVPTServiceLevel | read-only | mandatory | Service Level. |
| 1.3.6.1.4.1.6926.1.21.2.11.10.1.2 | ColumnoaQoSPermVPTvalue | read-only | mandatory | VPT bits value. |