OA-SFP-MIB
160 objects
This MIB defines objects of pluggable modules (such as SFP modules). The MIB objects defined in this MIB are based on the Small Form Factor Pluggable (SFP) Transceiver MultiSource Agreement(MSA).
Imported Objects
| OA-TRAP-MESSAGES-MIB | oaDevTrapsPortsIfAlias |
| OS-COMMON-TC-MIB | oaccess |
| RFC-1215 | -- TRAP-TYPE |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926.1 | NodeoaManagement | |||
| 1.3.6.1.4.1.6926.1.18 | IdentityoaSfpMib | This MIB defines objects of pluggable modules (such as SFP modules). The MIB objects defined in this MIB are based on the Small Form Factor Pluggable (SFP) Tra… | ||
| 1.3.6.1.4.1.6926.1.18.0 | NodeoaAlarmNotifications | |||
| 1.3.6.1.4.1.6926.1.18.0.68 | NotificationmsaPortRxLossAlarmOn | current | The SNMP trap that is generated when MSA Port Rx Loss Average Optical Power Alarm has been raised. | |
| 1.3.6.1.4.1.6926.1.18.0.69 | NotificationmsaPortRxLossAlarmOff | current | The SNMP trap that is generated when MSA Port Rx Loss Average Optical Power Alarm has been lowered. | |
| 1.3.6.1.4.1.6926.1.18.0.70 | NotificationmsaPortTxLaserWlAlarmOn | current | The SNMP trap that is generated when MSA Port WDM Tx Laser Wavelength Alarm has been raised. | |
| 1.3.6.1.4.1.6926.1.18.0.71 | NotificationmsaPorTxLaserWltAlarmOff | current | The SNMP trap that is generated when MSA Port WDM Tx Laser Wavelength Alarm has been lowered. | |
| 1.3.6.1.4.1.6926.1.18.0.72 | NotificationmsaPortTxModulatorTempAlarmOn | current | The SNMP trap that is generated when MSA Port WDM Tx Modulator Temperature Alarm has been raised. | |
| 1.3.6.1.4.1.6926.1.18.0.73 | NotificationmsaPortTxModulatorTempAlarmOff | current | The SNMP trap that is generated when MSA Port WDM Tx Modulator Temperature Alarm has been lowered. | |
| 1.3.6.1.4.1.6926.1.18.0.74 | NotificationmsaPortTxLaserPowerAlarmOn | current | The SNMP trap that is generated when MSA Port WDM Tx Laser Power Alarm has been raised. | |
| 1.3.6.1.4.1.6926.1.18.0.75 | NotificationmsaPortTxLaserPowerAlarmOff | current | The SNMP trap that is generated when MSA Port WDM Tx Laser Power Alarm has been lowered. | |
| 1.3.6.1.4.1.6926.1.18.0.76 | NotificationmsaPortTxPllLockAlarmOn | current | The SNMP trap that is generated when MSA Port WDM Tx PLL Lock Alarm has been raised. | |
| 1.3.6.1.4.1.6926.1.18.0.77 | NotificationmsaPortTxPllLockAlarmOff | current | The SNMP trap that is generated when MSA Port WDM Tx PLL Lock Alarm has been lowered. | |
| 1.3.6.1.4.1.6926.1.18.0.78 | NotificationmsaPortTxLaserTempAlarmOn | current | The SNMP trap that is generated when MSA Port WDM Tx Laser Temperature Alarm has been raised. | |
| 1.3.6.1.4.1.6926.1.18.0.79 | NotificationmsaPortTxLaserTempAlarmOff | current | The SNMP trap that is generated when MSA Port WDM Tx Laser Temperature Alarm has been lowered. | |
| 1.3.6.1.4.1.6926.1.18.0.80 | NotificationpluggableConnectorInserted | current | The SNMP trap that is generated when a pluggable connector/device is inserted into the specified slot and port. | |
| 1.3.6.1.4.1.6926.1.18.0.81 | NotificationpluggableConnectorRemoved | current | The SNMP trap that is generated when a pluggable connector/device is removed from the specified slot and port. | |
| 1.3.6.1.4.1.6926.1.18.0.82 | NotificationsfpXfpPortTempHighAlarmOn | current | The SNMP trap that is generated when a SFP/XFP port's internal temperature exceeds high alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.83 | NotificationsfpXfpPortTempHighAlarmOff | current | The SNMP trap that is generated when a SFP/XFP port's internal temperature returns below high alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.84 | NotificationsfpXfpPortTempLowAlarmOn | current | The SNMP trap that is generated when a SFP/XFP port's internal temperature is below low alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.85 | NotificationsfpXfpPortTempLowAlarmOff | current | The SNMP trap that is generated when a SFP/XFP port's internal temperature returns up low alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.86 | NotificationsfpXfpPortTxPowerHighAlarmOn | current | The SNMP trap that is generated when a SFP/XFP port's TX output power exceeds high alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.87 | NotificationsfpXfpPortTxPowerHighAlarmOff | current | The SNMP trap that is generated when a SFP/XFP port's TX output power returns below high alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.88 | NotificationsfpXfpPortTxPowerLowAlarmOn | current | The SNMP trap that is generated when a SFP/XFP port's TX output power is below low alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.89 | NotificationsfpXfpPortTxPowerLowAlarmOff | current | The SNMP trap that is generated when a SFP/XFP port's TX output power returns up low alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.90 | NotificationsfpXfpPortRxPowerHighAlarmOn | current | The SNMP trap that is generated when a SFP/XFP port's Received power exceeds high alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.91 | NotificationsfpXfpPortRxPowerHighAlarmOff | current | The SNMP trap that is generated when a SFP/XFP port's Received power returns below high alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.92 | NotificationsfpXfpPortRxPowerLowAlarmOn | current | The SNMP trap that is generated when a SFP/XFP port's Received power is below low alarm level. | |
| 1.3.6.1.4.1.6926.1.18.0.93 | NotificationsfpXfpPortRxPowerLowAlarmOff | current | The SNMP trap that is generated when a SFP/XFP port's Received power returns up low alarm level. | |
| 1.3.6.1.4.1.6926.1.18.1 | NodeoaSfp | |||
| 1.3.6.1.4.1.6926.1.18.1.1 | NodeoaSfpMIBObjects | |||
| 1.3.6.1.4.1.6926.1.18.1.1.1 | ScalaroaSfpCompatibleInterfaceCount | read-only | current | The number of ports in the system which are sfp compatible |
| 1.3.6.1.4.1.6926.1.18.1.1.2 | TableoaSfpInfoTable | not-accessible | current | The sfp information table. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1 | RowoaSfpInfoEntry | not-accessible | current | An entry in the SFP Information Table |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.1 | ColumnoaSfpInfoSlotIndex | accessible-for-notify | current | The SFP slot number |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.2 | ColumnoaSfpInfoPortIndex | accessible-for-notify | current | The SFP port number |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.3 | ColumnoaSfpInfoIdentifier | read-only | current | The type of serial transceiver unknown - Unknown or unspecified other - Vendor specific gbic - GBIC fixed - Module/connector soldered to motherboard sfp - SFP … |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.4 | ColumnoaSfpInfoVendorSpecificIdentifier | read-only | current | The vendor specific identifier. This Object will be set to value other than null only if oaSfpInfoIdentifier returns a value of other |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.8 | ColumnoaSfpInfoConnector | read-only | current | The type of external connector provided unknown - Unknown or unspecified other - Vendor specific sc - SC fcs1cc - Fibre Channel Style 1 copper connector fcs2cc… |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.9 | ColumnoaSfpInfoVendorSpecificConnector | read-only | current | The type of vendor specific Connector. This Object will be set to value other than null only if oaSfpInfoConnector returns a value of other |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.18 | ColumnoaSfpInfoTransceiver10GigaEth | read-only | current | The 10 Giga Ethernet type of optic transceiver compliance code. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.19 | ColumnoaSfpInfoTransceiverInfiniband | read-only | current | The Infiniband type of optic transceiver compliance code. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.20 | ColumnoaSfpInfoTransceiverEscon | read-only | current | The ESCON type of optic transceiver compliance code. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.21 | ColumnoaSfpInfoTransceiverSonet | read-only | current | The SONET type of optic transceiver compliance code. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.22 | ColumnoaSfpInfoTransceiverEthernet | read-only | current | The Ethernet type of optic transceiver compliance code. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.23 | ColumnoaSfpInfoTransceiverFibreChannel | read-only | current | The Fibre Channel type of optic transceiver compliance code. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.24 | ColumnoaSfpInfoVendorName | read-only | current | The sfp vendor name which is the full name of the corporation, a commonly accepted abbreviation of the name of the corporation, the SCSI company code for the c… |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.25 | ColumnoaSfpInfoVendorOUI | read-only | current | The sfp vendor organizationally unique identifier field (vendor OUI) that contains the IEEE company identifier for the vendor. A value of all zero in the 3 oct… |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.26 | ColumnoaSfpInfoVendorPN | read-only | current | The sfp vendor part number (Vendor PN) or product name if the Vendor PN is unspecified, the null string will be returned |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.27 | ColumnoaSfpInfoVendorRev | read-only | current | The transceiver vendor's product revision number (Vendor Rev) if the Vendor Rev is unspecified, the null string will be returned |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.28 | ColumnoaSfpInfoLaserWavelength | read-only | current | Nominal Transmitter output wavelength at room temperature. Units: 0.01 Nano Meter(nm) |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.29 | ColumnoaSfpTunability | read-only | current | The tunability of SFP/XFP transceiver. unknown - Unknown about tunability feature; tunable - Wavelength tunability feature is implemented; nonTunable - Wavelen… |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.32 | ColumnoaSfpInfoVendorSN | read-only | current | The Sfp vendor serial number (Vendor SN) if the Vendor SN is unspecified, the null string will be returned |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.33 | ColumnoaSfpInfoVendorDate | read-only | current | The Vendor's date. Formated: YY MM DD |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.34 | ColumnoaSfpInfoVendorSpecificLotCode | read-only | current | The Vendor Specific Lot code. A null value indicates that the lot code is unspecified. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.35 | ColumnoaSfpInfoVendorSpecificData | read-only | current | Vendor Specific Information which can be read from the SFP transceiver (Reference: SFF-8472, revision 9.3 - Registers 96-127 ) |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.36 | ColumnoaSfpInfoDiagnosticPowerType | read-only | current | The diagnostic monitoring receive power type in the SFP transceiver. unknown - Unknown avarage - Received power measurement type is avarage oma - Received powe… |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.37 | ColumnoaSfpInfoDigitalDiagnostic | read-only | current | The diagnostic monitoring implemented in the SFP transceiver. unknown - Unknown digitalDiagMonitoring - Digital diagnostic monitoring implemented. noDigitalDia… |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.38 | ColumnoaSfpInfoDiagnosticCalibration | read-only | current | The diagnostic calibration in the SFP transceiver. unknown - Unknown ExternalCalibration - External Calibration InternalCalibration - Internal Calibration |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.40 | ColumnoaSfpInfoInstalledStatus | read-only | current | The current installed state of the sfp transceiver unknown - Unknown notInstalled - the SFP transceiver is not installed installed - the sfp transceiver is ins… |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.41 | ColumnoaSfpInfofaultStatus | read-only | current | The current fault state of the sfp transceiver unknown - Unknown fault - the sfp transceiver is faulty operational - the sfp transceiver is working properly |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.42 | ColumnoaSfpInfoEnableStatus | read-only | current | The current enable state of the sfp transceiver unknown - Unknown enabled - the sfp transceiver has been enabled disabled - the sfp transceiver has been diabled |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.43 | ColumnoaSfpInfoUnitName | read-only | current | The sfp unit name |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.44 | ColumnoaSfpInfoFiberType | read-only | current | The sfp fiber type multi/single mode. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.45 | ColumnoaSfpInfoReach | read-only | current | The sfp info reach. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.46 | ColumnoaSfpInfoConnectorType | read-only | current | The sfp connector type |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.47 | ColumnoaSfpInfoItemNum | read-only | current | The sfp item number. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.48 | ColumnoaSfpInfoHWRev | read-only | current | The sfp hardware revision. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.49 | ColumnoaSfpInfoCleiCode | read-only | current | The sfp clei code |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.50 | ColumnoaSfpInfoPageA2hSN | read-only | current | The sfp serial number taken from A2h eeprom page |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.51 | ColumnoaSfpInfoManufactureDate | read-only | current | The sfp manufacture date. |
| 1.3.6.1.4.1.6926.1.18.1.1.2.1.52 | ColumnoaSfpInfoManufactureID | read-only | current | The sfp manufacture ID |
| 1.3.6.1.4.1.6926.1.18.1.1.3 | TableoaSfpDiagnosticTable | not-accessible | current | The sfp real time diagnostic table. |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1 | RowoaSfpDiagnosticEntry | not-accessible | current | An entry in the SFP Real Time Diagnostic Table |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1.1 | ColumnoaSfpDiagnosticSlotIndex | not-accessible | current | The SFP slot number |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1.2 | ColumnoaSfpDiagnosticPortIndex | not-accessible | current | The SFP port number |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1.3 | ColumnoaSfpDiagnosticTemperature | read-only | current | Internaly measured module temperature. Units: 1/10 degrees Celsius (C) |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1.4 | ColumnoaSfpDiagnosticVcc | read-only | current | Internaly measured supply voltage in transceiver. Units: 100 micro Volts (V) |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1.5 | ColumnoaSfpDiagnosticTxBias | read-only | current | Internaly measured Tx Bias current. Units: 1 micro Amperes (A) |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1.6 | ColumnoaSfpDiagnosticTxPower | read-only | current | Internaly measured Tx output power. Units: 0.01 decibel (dBm) |
| 1.3.6.1.4.1.6926.1.18.1.1.3.1.7 | ColumnoaSfpDiagnosticRxPower | read-only | current | Internaly measured Rx input power. Units: 0.01 decibel (dBm) |
| 1.3.6.1.4.1.6926.1.18.1.1.4 | TableoaSfpRatesSupportedTable | not-accessible | current | The sfp supported rates. |
| 1.3.6.1.4.1.6926.1.18.1.1.4.1 | RowoaSfpRatesSupportedEntry | not-accessible | current | An entry in the SFP Supported rates list |
| 1.3.6.1.4.1.6926.1.18.1.1.4.1.3 | ColumnoaSfpRatesSupportedIndex | not-accessible | current | Index of rates database the SFP support. |
| 1.3.6.1.4.1.6926.1.18.1.1.4.1.4 | ColumnoaSfpRatesSupportedValue | read-only | current | Rate value the SFP support - unit are in 100m. |
| 1.3.6.1.4.1.6926.1.18.1.2 | NodeoaXfpMIBObjects | |||
| 1.3.6.1.4.1.6926.1.18.1.2.1 | ScalaroaXfpCompatibleInterfaceCount | read-only | current | The number of ports in the system which are xfp compatible |
| 1.3.6.1.4.1.6926.1.18.1.2.2 | TableoaXfpInfoTable | not-accessible | current | The XFP information table. |
| 1.3.6.1.4.1.6926.1.18.1.2.2.1 | RowoaXfpInfoEntry | not-accessible | current | An entry in the XFP Information Table |
| 1.3.6.1.4.1.6926.1.18.1.2.2.1.1 | ColumnoaXfpInfoSlotIndex | not-accessible | current | The XFP slot number |
| 1.3.6.1.4.1.6926.1.18.1.2.2.1.2 | ColumnoaXfpInfoPortIndex | not-accessible | current | The XFP port number |
| 1.3.6.1.4.1.6926.1.18.1.2.2.1.28 | ColumnoaXfpInfoLaserWavelengthTolerance | read-only | current | Guaranteed +/- range of transmitter output wavelength under all normal operating conditions. Units: 0.001 Nano Meter(nm) |
| 1.3.6.1.4.1.6926.1.18.1.2.3 | TableoaXfpTunTable | not-accessible | current | The XFP Tunability Parameters table. |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1 | RowoaXfpTunEntry | not-accessible | current | An entry in the XFP Tunability Parameters Table |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1.1 | ColumnoaXfpTunSlotIndex | not-accessible | current | The Tunable XFP slot number |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1.2 | ColumnoaXfpTunPortIndex | not-accessible | current | The Tunable XFP port number |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1.3 | ColumnoaXfpTunLaserFirstFrequency | read-only | current | First Frequency setting supported by the Tunable XFP port as defined in the factory prior shipment. Units: 0.001 Terahertz(THz) |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1.4 | ColumnoaXfpTunLaserLastFrequency | read-only | current | Last Frequency setting supported by the Tunable XFP port as defined in the factory prior shipment. Units: 0.001 Terahertz(THz) |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1.5 | ColumnoaXfpTunGridSpacing | read-only | current | The Tunable XFP port spacing. The port is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz g25 - 25 GHz |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1.6 | ColumnoaXfpTunLaserItuBand | read-only | current | ITU Band setting supported by the Tunable XFP port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band |
| 1.3.6.1.4.1.6926.1.18.1.2.3.1.7 | ColumnoaXfpTunLaserItuCh | read-write | current | ITU Channel number of the Tunable XFP port * 1000. |
| 1.3.6.1.4.1.6926.1.18.1.3 | NodeoaDsfpMIBObjects | |||
| 1.3.6.1.4.1.6926.1.18.1.3.1 | ScalaroaDsfpCompatibleInterfaceCount | read-only | current | The number of ports in the system which are DWDM sfp compatible |
| 1.3.6.1.4.1.6926.1.18.1.3.2 | TableoaDsfpInfoTable | not-accessible | current | The DWDM SFP information table. |
| 1.3.6.1.4.1.6926.1.18.1.3.2.1 | RowoaDsfpInfoEntry | not-accessible | current | An entry in the XFP Information Table |
| 1.3.6.1.4.1.6926.1.18.1.3.2.1.1 | ColumnoaDsfpInfoSlotIndex | not-accessible | current | The DWDM SFP slot number |
| 1.3.6.1.4.1.6926.1.18.1.3.2.1.2 | ColumnoaDsfpInfoPortIndex | not-accessible | current | The DWDM SFP port number |
| 1.3.6.1.4.1.6926.1.18.1.3.2.1.4 | ColumnoaDsfpInfoChannelSpacing | read-only | current | The densest channel spacing the modle is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz |
| 1.3.6.1.4.1.6926.1.18.1.3.2.1.5 | ColumnoaDsfpInfoChannelTuning | read-only | current | The number of channel over which the module may be tuned by user command (1 - 63). |
| 1.3.6.1.4.1.6926.1.18.1.4 | NodeoaMsa300PinMIBObjects | |||
| 1.3.6.1.4.1.6926.1.18.1.4.1 | ScalaroaMsa300PinCompatibleIfCount | read-only | current | The number of ports in the system which are MSA 300 Pin compatible |
| 1.3.6.1.4.1.6926.1.18.1.4.2 | TableoaMsa300PinIdTable | not-accessible | current | The Msa300Pin Identifier table. |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1 | RowoaMsa300PinIdEntry | not-accessible | current | An entry in the Msa300Pin Identifier Table |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.1 | ColumnoaMsa300PinIdSlotIndex | not-accessible | current | The MSA 300 Pin slot number |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.2 | ColumnoaMsa300PinIdPortIndex | not-accessible | current | The MSA 300 Pin port number |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.4 | ColumnoaMsa300PinIdModuleTypeCode | read-only | current | Port Type code. unknown - Unknown msa10Gb - 10Gb MSA msa10GbWdm - 10Gb MSA WDM |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.6 | ColumnoaMsa300PinIdFirstLaserItuBand | read-only | current | First ITU Band setting supported by the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.7 | ColumnoaMsa300PinIdFirstLaserItuCh | read-only | current | First ITU Channel setting supported by the port (i.e. maximum wavelength) as defined in the factory prior shipment. Units: 0.01 Nano Meter(nm) |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.8 | ColumnoaMsa300PinIdLastLaserItuBand | read-only | current | Last ITU Band setting supported by the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.9 | ColumnoaMsa300PinIdLastLaserItuCh | read-only | current | Last ITU Channel setting supported by the port (i.e. maximum wavelength) as defined in the factory prior shipment. Units: 0.01 Nano Meter(nm) |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.10 | ColumnoaMsa300PinIdLaserItuChSpacing | read-only | current | The MSA 300 Pin port spacing the port is compatible with. unknown - Unknown g200 - 200 GHz g100 - 100 GHz g50 - 50 GHz g25 - 25 GHz |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.11 | ColumnoaMsa300PinIdModuleDistanceType | read-only | current | MSA Module Distance Type. unknown - Unknown msa40Km(2) - 40 km distance, msa80Km(3) - 80 km distance, msa120Km(4) - 120 km distance, msa160Km(5) - 160 km dista… |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.12 | ColumnoaMsa300PinIdMinDispDist | read-only | current | Minimum Dispersion distance of integrated TODC. (0) is returned when this feature is not supported Units: ps/nm |
| 1.3.6.1.4.1.6926.1.18.1.4.2.1.13 | ColumnoaMsa300PinIdMaxDispDist | read-only | current | Maximum Dispersion distance of integrated TODC. (0) is returned when this feature is not supported Units: ps/nm |
| 1.3.6.1.4.1.6926.1.18.1.4.3 | TableoaMsa300PinMeasTable | not-accessible | current | The MSA 300 Pin Measurement table. |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1 | RowoaMsa300PinMeasEntry | not-accessible | current | An entry in the MSA 300 Pin Measurement Table |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1.1 | ColumnoaMsa300PinMeasSlotIndex | not-accessible | current | The MSA 300 Pin slot number |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1.2 | ColumnoaMsa300PinMeasPortIndex | not-accessible | current | The MSA 300 Pin port number |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1.4 | ColumnoaMsa300PinMeasLaserOutputPwrMon | read-only | current | Laser output power. Units: 0.01 decibel (dBm) |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1.5 | ColumnoaMsa300PinMeasLaserTempMon | read-only | current | Laser temperature. Units: 0.001 degrees Celsius (C) |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1.7 | ColumnoaMsa300PinMeasRecSigAvrOptPower | read-only | current | Average received optical power. Units: 0.01 decibel (dBm) |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1.8 | ColumnoaMsa300PinMeasLaserWlengthMon | read-only | current | The offset of the exact ITU channel wavelength. Units: Mega Hertz (MHz) |
| 1.3.6.1.4.1.6926.1.18.1.4.3.1.9 | ColumnoaMsa300PinMeasTransTempMon | read-only | current | Transponder Temperature. Units: 0.001 degrees Celsius (C) |
| 1.3.6.1.4.1.6926.1.18.1.4.4 | TableoaMsa300PinAlarmTable | not-accessible | current | The MSA 300 Pin Alarm table. |
| 1.3.6.1.4.1.6926.1.18.1.4.4.1 | RowoaMsa300PinAlarmEntry | not-accessible | current | An entry in the MSA 300 Pin Alarm Table |
| 1.3.6.1.4.1.6926.1.18.1.4.4.1.1 | ColumnoaMsa300PinAlarmSlotIndex | accessible-for-notify | current | The MSA 300 Pin slot number |
| 1.3.6.1.4.1.6926.1.18.1.4.4.1.2 | ColumnoaMsa300PinAlarmPortIndex | accessible-for-notify | current | The MSA 300 Pin port number |
| 1.3.6.1.4.1.6926.1.18.1.4.4.1.3 | ColumnoaMsa300PinAlarmTxAlarm | read-only | current | Transmit Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit re… |
| 1.3.6.1.4.1.6926.1.18.1.4.4.1.4 | ColumnoaMsa300PinAlarmRxAlarm | read-only | current | Receive Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit rep… |
| 1.3.6.1.4.1.6926.1.18.1.4.4.1.5 | ColumnoaMsa300PinAlarmPsAlarm | read-only | current | Receive Alarms. Alarm bits in this object remain in the alarmed state until a read of this register occurs. This object is organised as a bit map. Each bit rep… |
| 1.3.6.1.4.1.6926.1.18.1.4.5 | TableoaMsa300PinComTable | not-accessible | current | The MSA 300 Pin Command table. |
| 1.3.6.1.4.1.6926.1.18.1.4.5.1 | RowoaMsa300PinComEntry | not-accessible | current | An entry in the MSA 300 Pin Command Table |
| 1.3.6.1.4.1.6926.1.18.1.4.5.1.1 | ColumnoaMsa300PinComSlotIndex | not-accessible | current | The MSA 300 Pin slot number |
| 1.3.6.1.4.1.6926.1.18.1.4.5.1.2 | ColumnoaMsa300PinComPortIndex | not-accessible | current | The MSA 300 Pin port number |
| 1.3.6.1.4.1.6926.1.18.1.4.5.1.7 | ColumnoaMsa300PinComLaserItuBand | read-write | current | ITU Band of the port. unknown - Unknown cBand - C Band lBand - L Band sBand - S Band |
| 1.3.6.1.4.1.6926.1.18.1.4.5.1.8 | ColumnoaMsa300PinComLaserItuCh | read-write | current | ITU Channel wavelength of the port Units: 0.01 Nano Meter(nm) |
| 1.3.6.1.4.1.6926.1.18.1.4.5.1.9 | ColumnoaMsa300PinComDispDist | read-write | current | Dispersion distance of integrated TODC. Units: ps/nm |
| 1.3.6.1.4.1.6926.1.18.1.4.5.1.10 | ColumnoaMsa300PinComPolarityInversion | read-write | current | Polarity Inversion feature of the port. Supported for TM-DXFPT modules only, if this feature is defined for module. |
| 1.3.6.1.4.1.6926.1.18.2 | NodeoaSfpConformance | |||
| 1.3.6.1.4.1.6926.1.18.2.1 | NodeoaSfpGroups | |||
| 1.3.6.1.4.1.6926.1.18.2.1.1 | GroupoaSfpCompatibleIfCountGroup | current | A collection of objects providing information on number of specific compatible ports. | |
| 1.3.6.1.4.1.6926.1.18.2.1.2 | GroupoaSfpGroup | current | A collection of objects providing information on SFP compatible ports. | |
| 1.3.6.1.4.1.6926.1.18.2.1.3 | GroupoaXfpGroup | current | A collection of objects providing information on XFP compatible ports. | |
| 1.3.6.1.4.1.6926.1.18.2.1.4 | GroupoaDsfpGroup | current | A collection of objects providing information on DSFP compatible ports. | |
| 1.3.6.1.4.1.6926.1.18.2.1.5 | GroupoaMsa300PinGroup | current | A collection of objects providing information on MSA 300 Pin compatible ports. | |
| 1.3.6.1.4.1.6926.1.18.2.1.6 | GroupoaMsa300PinNotificationsGroup | current | The notifications which are required to be supported by implementations of this MIB. | |
| 1.3.6.1.4.1.6926.1.18.2.1.7 | GroupoaPlugConnNotificationsGroup | current | The notifications which are required to be supported by implementations of this MIB. | |
| 1.3.6.1.4.1.6926.1.18.2.1.8 | GroupoaXfpTunGroup | current | A collection of objects providing information on Tunable XFP compatible ports. | |
| 1.3.6.1.4.1.6926.1.18.2.2 | NodeoaSfpCompliances | |||
| 1.3.6.1.4.1.6926.1.18.2.2.1 | ComplianceoaSfpCompliance | current | The compliance statement for SNMP entities which have SFP/DSFP/XFP/MSA300Pin module interfaces. |