OMNITRON-TC-MIB
50 objects
Omnitron TC MIB for use with v5.2 iConverter Management Modules and NetOutlook Copyright 2015 Omnitron Systems Technology, Inc. All rights reserved
Imported Objects
| SNMPv2-SMI | Counter64 enterprises Integer32 MODULE-IDENTITY Unsigned32 |
| SNMPv2-TC | -- RFC-2578 TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7342 | Nodeomnitron | |||
| 1.3.6.1.4.1.7342.1 | NodeicAgent | |||
| 1.3.6.1.4.1.7342.11 | IdentityostOmnitronTcMib | Omnitron TC MIB for use with v5.2 iConverter Management Modules and NetOutlook Copyright 2015 Omnitron Systems Technology, Inc. All rights reserved |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OstAccessibiltyType | INTEGER { deny (1), permit (2) } | current | Accessibilty type enumeration. deny(1) Access to the module is not allowed permit(2) Access to the module is allowed |
| OstClassOfService | Unsigned32 (0..4) | current | Class of service setting. 0=discard, 1=lowest class, 4=highest class |
| OstClockFreq | Unsigned32 | current | Clock frequency in hundreths of MHz. |
| OstCosL2cpDstAddr | Unsigned32 (1..20) | current | L2CP destination address enumeration. Index | Destination Address | Name 1 | 01-80-C2-00-00-00 | RSTP 2 | 01-80-C2-00-00-01 | Pause 3 | 01-80-C2-00-00-02 | LACP 4 | 01-80-C2-00-00-02 | Marker 5 | 01-80-C2-00-00-02 | Lin… |
| OstCosNameString | OCTET STRING (SIZE(1..45)) | current | A class of service name. |
| OstCosNameStringOrNone | OCTET STRING (SIZE(0..45)) | current | A class of service name or an empty string. |
| OstCosTrustType | INTEGER { cosTrust (1), cosUsePri (2), cosUseClass (3), cosUsePriClass (4), cosGreenYellow (5) } | current | CoS trust type enumeration. Green traffic is marked with low drop precedence and yellow traffic is marked with high drop precedence. cosTrust(1) Trust frame. The frames priority determines the egress class. cosUsePri(2)… |
| OstEgressQueueIndexType | Unsigned32 (1..8) | current | A value that uniquely identifies an Egress Queue. The valid values are 1 to X, where X is the maximum supported profile. The maximum value for X for the GM4 is 4. |
| OstEgressSchedulingProfileIndexType | Unsigned32 (1..8) | current | A value that uniquely identifies an Egress Scheduling Profile. The valid values are 1 to X, where X is the maximum supported profile. The maximum value for X for the GM4 is 4. |
| OstElpsProtectType | INTEGER { e1plus1UniNoAps (1), e1plus1UniAps (2), e1plus1BiAps (3), e1to1 (4), notAvailable (5) } | current | A value that represents the ELPS protection type. The value can be one of the following: e1plus1UniNoAps(1) 1 unidirectional without APS communication e1plus1UniAps(2) 1 unidirectional switching with APS communication e… |
| OstElpsRequestStates | INTEGER { noRequest (0), doNotRevert (1), revertRequest (2), exercise (4), waitToRestore (5), manualSwitchWorking (6), manualSwitch (7), signalDegrade (9), signalFailWorking (11), forcedSwitch (13), signalFailProtection (14), lockoutProtection (15), notAvailable (16) } | current | A value that represents the current request/state of either the local or remote (partner) ELPS instance. The value can be one of the following: noRequest(0) No Request (NR), lowest priority doNotRevert(1) Do Not Revert … |
| OstElpsSignalStates | INTEGER { nullSignal (0), normalSignal (1), notAvailable (2) } | current | A value that represents the requested or bridged signal for either the local or remote (partner) ELPS instance. The value can be one of the following: nullSignal(0) Null signal. This indicates the signal that the near-e… |
| OstErpsLinkState | INTEGER { na(0), up(1), down(2) } | current | A value that represents the current port link state. This is a function that indicates whether the current port is linked. The value can be one of the following: na(0) Not Applicable, port state is unknown up(1) Port is… |
| OstErpsPortState | INTEGER { na(0), forward(1), blocked(2) } | current | A value that represents the current forwarding state of the port. The value can be one of the following: na(0) Not Applicable, port state is unknown forward(1) Port is in the forwarding state blocked(2) Port is in the b… |
| OstErpsPortType | INTEGER { rp0(1), rp1(2) } | current | A value that represents the Ring Port type. The value can be one of the following: rp0(1) Ring Port 0 rp1(2) Ring Port 1 |
| OstErpsRingStates | INTEGER { noRequest (0), rapsNr (1), rapsNrRb (2), wtbRunning (3), wtbExpires (4), wtrRunning (5), wtrExpires (6), manualSwitch (7), rapsManualSwitch (8), rapsSignalFail (9), localClearSignalFail (10), localSignalFail (11), rapsForcedSwitch (12), forcedSwtich (13), clear (14) } | current | A value that represents the current request/state of either the local or remote (partner) ERPS instance. The value can be one of the following: noRequest(0) No Request (NR), local, lowest priority rapsNr(1) Ring APS (R-… |
| OstErpsRingStatus | INTEGER { initializing (1), idle (2), protection (3), manualSwitch (4), forcedSwitch (5), pending (6) } | current | A value that represents the current ring status. This is state machine node state value for the ERPS instance. The value can be one of the following: initializing(1) State machine initialization idle(2) Idle State (A) p… |
| OstErrorString | OCTET STRING (SIZE(0..255)) | current | The SNMP error string for further definition of a SNMP error. |
| OstEvcNameString | OCTET STRING (SIZE(1..45)) | current | An EVC name. |
| OstEvcNameStringOrNone | OCTET STRING (SIZE(0..45)) | current | An EVC name or an empty string. |
| OstFileNameString | OCTET STRING (SIZE(1..45)) | current | A internal file name. |
| OstFingerprintString | OCTET STRING (SIZE(1..64)) | current | The fingerprint value for SSH protocol. |
| OstFloatValue | OCTET STRING (SIZE(0..20)) | current | Floating point data type as represented in an octet string. Legal values and precision are indicated by the appropriate object. Only numbers and the decimal place are legal digit values. Example values: 1000 1500.05 154… |
| OstFrameCount64 | Counter64 | current | Frame counter value. |
| OstFrameSizeList | OCTET STRING (SIZE(1..255)) | current | Denotes a list of one or more frame sizes. 1. Frame sizes have a value from 64 to 10240 bytes for the GM3, GM4, and GM4-PoE. Frame sizes have a value from 64 to 10240 bytes for the XM5. 2. Individual frame sizes are inc… |
| OstIndexIntegerNextFree | always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) MUST determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application MUST then re-read this variable to obtain a new usable value. | current | |
| OstIpAddr | OCTET STRING (SIZE(0..39)) | current | This data type is used to model both IPv4 and IPv6 addresses. It is a hexadecimcal octet string with separators between number groups: either '.' for IPv4 or ':' for IPv6. The IP type is derived based upon the format of… |
| OstIpPriorityList | OCTET STRING (SIZE(0..14)) | current | Selects IP priority values. Valid values are from 0 to 63. Format: X selects a single PCP priority value X..Y selects a range of PCP priority values, X to Y X,Y selects PCP priority values seperated by a comma Example v… |
| OstIpv6Addr | OCTET STRING (SIZE(16..16)) | current | This data type is used to model the IPv6 address. This is a binary string of up to 8 octets in network byte-order. |
| OstMhfCreation | INTEGER { ostMHFdefault (1), ostMHFexplicit (2) } | current | Indicates if the Management Entity can create MHFs. The valid values are: ostMHFdefault(2) MHFs can be created on this VID on any Bridge port through which this VID can pass. ostMHFexplicit(3) MHFs can be created for th… |
| OstMipdMethodOfCreation | INTEGER { ostExplicit(1), ostImplicitMa(2), ostImplicitMde(3), ostExplicitImplicitMa(4) } | current | Indicates the method of how this Mip table entry was created The valid values are: ostExplicit(1) indicates the Mip was created explicitly through a command. ostImplicitMa(2) indicates the Mip was created implicitly thr… |
| OstModeType | INTEGER { normal (1), ap (2), sp (3) } | current | The module Mode Type as AP, SP or neither. normal(1) Not specifically AP or SP ap(2) Access Provider sp(3) Service Provider |
| OstModuleSingleIndex | Unsigned32 (101..9999) | current | A value that uniquely identifies the chassis and slot in which the module is located. Base 10 Format: CCSS where CC is the chassis index, 1 to 99 SS is the slot index, 1 to 99 |
| OstPcpPriorityList | OCTET STRING (SIZE(0..14)) | current | Selects PCP priority values. Valid values are from 0 to 7. Format: X selects a single PCP priority value X..Y selects a range of PCP priority values, X to Y X,Y selects PCP priority values seperated by a comma Example v… |
| OstPortClockType | INTEGER { adaptiveIdle(1), adaptiveAcqu(2), adaptiveTrk1(3), adaptiveTrk2(4), holdOver(5), coax(6), internal(7), line(8) } | current | A value that indicates the TDM port recovery state/mode. |
| OstPortList | OCTET STRING | current | Denotes a list of one or more ports, separated by comma characters, in the form of an ASCII string, which is case insensitive. Port Description 1 Port 1 2 Port 2 3 Port 3 4 Port 4 5 Port 5 6 Port 6 7 Port 7 8 Port 8 9 P… |
| OstPortNumber | Unsigned32 (0..99) | current | This object selects the port number for the specific test instance that is configured. This value is dependent upon actual product accessed. The port number for a specific port can be determined by selecting the module … |
| OstPortSingleIndex | Unsigned32 (10101..999999) | current | A value that uniquely identifies a module port, and the chassis and slot in which the module is located. Base 10 Format: CCSSPP where CC is the chassis index, 1 to 99 SS is the slot index, 1 to 99 PP is the port index, … |
| OstPriority | Unsigned32 (0..7) | current | Priority setting. |
| OstProbeNameString | OCTET STRING (SIZE(1..45)) | current | An EVC name. |
| OstProfileNameString | OCTET STRING (SIZE(1..45)) | current | A test profile name. |
| OstTestResultType | INTEGER { pass (1), fail (2), oversubscribe (3) } | current | A value that indicates the result of a test. The value can be one of the following: pass(1) Indicates the test has passed successfully fail(2) Indicates the test has failed oversubscribe(3) Indicates the test failed due… |
| OstTestStatusType | INTEGER { testNotStarted (1), testInProcess (2), testStopped (3), testCompleted (4), testInitializing(5) } | current | A value that indicates the status of the current test instance. The value can be one of the following: testNotStarted(1) Current test instance has not started yet, not fully configured, or waiting for loop-up testInProc… |
| OstUnsigned64 | Counter64 | current | A non-negative 64-bit bit integer, without counter semantics, between 0 and 2^64-1 inclusive (0 to 18446744073709551615 decimal). It can have a MAX-ACCESS of read-only or read-write. SYNTAX is Counter64 for the encoding… |
| OstUserNameString | OCTET STRING (SIZE(1..32)) | current | A string that is used to identify a specific user. |
| OstVlanId | Integer32 (0..4095) | current | The VLAN-ID that uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. |
| OstVlanIdList | OCTET STRING (SIZE(0..110)) | current | Denotes a list of one or more VLAN IDs. VLAN IDs have a value of 0 to 4095. Individual VLAN IDs are included when separated by a comma ','. A range of VLAN IDs is included when separated by '..'. An asterisk indicates u… |