ONEACCESS-AAA-MIB
51 objects
Fixed the issues related to octet string range
Imported Objects
| IF-MIB | InterfaceIndex |
| ONEACCESS-GLOBAL-REG | oacExpIMManagement oacMIBModules |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString PhysAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13191.1.100.690 | IdentityoacAAAConfigMIB | 381 | Fixed the issues related to octet string range | |
| 1.3.6.1.4.1.13191.10.3.4.10 | NodeoacAAAConfig | |||
| 1.3.6.1.4.1.13191.10.3.4.10.1 | NodeoacAAAConfigObjects | |||
| 1.3.6.1.4.1.13191.10.3.4.10.1.1 | TableoacAAARadiusServerConfigTable | not-accessible | current | Configuring Radius Server: For the device to authenticate with an radius server database, the following parameters have to be configured. The cli command for a… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1 | RowoacAAARadiusServerConfigEntry | not-accessible | current | The Radius Server config entry will hold the details of one radius servers configured for the client to send the requests for authentication. This table is ind… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1.1 | ColumnoacAAARadiusServerInfo | read-create | current | The Info can be an : A.B.C.D IPv4 host address A.B.C.D Ipv4 subnet hostname Hostname. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1.2 | ColumnoacAAARadiusServerPort | read-create | current | The default server port to which radius client will connect to a radius server is 1812. But the user can always specify the port to which the client should con… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1.3 | ColumnoacAAARadiusServerSharedKey | read-create | current | Pre shared key between the radius client and server. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1.4 | ColumnoacAAARadiusServerRetries | read-create | current | The Client can do the configured number of retries to this radius server before moving to the next radius server. The default number of retries is 3. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1.5 | ColumnoacAAARadiusServerTimeout | read-create | current | The nummber of seconds to wait before to call a timeout. The default value is 3 seconds. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1.6 | ColumnoacAAARadiusServerInterface | read-create | current | The interface for this device to use to contact the radius server for auth requests. It is identified by the ifIndex. Each interface/unit is identified by an i… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.1.1.7 | ColumnoacAAARadiusServerRowStatus | read-create | current | The Row status for an entry in the oacAAARadiusServerConfigTable. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.2 | ScalaroacAAARadiusConfigAccPort | read-write | current | Set the port for Radius accouting. reset or deletion of this value is not possible the port value can only be modified. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3 | TableoacAAATacacsServerConfigTable | not-accessible | current | Configuring Tacacs client: The cli to add tacacs server info for the tacacs client is tacacs-server <host> [<port>] <key> [ <interface> <unit> ] Hence the snmp… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3.1 | RowoacAAATacacsServerConfigEntry | not-accessible | current | An entry holds the information per tacacs server configured. the entry is uniquely identified/indexed by the oacAAATacacsServerInfo which can be either the IPv… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3.1.1 | ColumnoacAAATacacsServerInfo | read-create | current | The Info can be an : A.B.C.D IPv4 host address A.B.C.D Ipv4 subnet hostname Hostname. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3.1.2 | ColumnoacAAATacacsServerPort | read-create | current | The default for an tacacs client to connect to tacacs server is 49. But this can vary depending on the server configuration. Hence when a tacacs server is adde… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3.1.3 | ColumnoacAAATacacsServerSharedKey | read-create | current | The shared key will be used to authenticate a tacacs client with the tacacs server. This has key is different from the user authentication keys. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3.1.4 | ColumnoacAAATacacsServerTimeout | read-create | current | The default timeout value for an client to wait for a response from the tacacs server is set to 3 seconds. but this can be modified by setting a value. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3.1.5 | ColumnoacAAATacacsServerInterface | read-create | current | The interface which this tacacs client should use to contact the configured tacacs server. The interface is identified by the ifIndex. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.3.1.6 | ColumnoacAAATacacsServerRowStatus | read-create | current | The Rowstatus for this entry. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.4 | ScalaroacAAATacacsConfigUseUsername | read-write | current | usage of user name for authentication for enable command. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.5 | TableoacAAAAuthenticationServerConfigTable | not-accessible | current | AAA configuration on OneOS The AAA servers can be configured to either authenticate user login or authenticate enable commands for a given user. OneOS can eith… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.5.1 | RowoacAAAAuthenticationServerConfigEntry | not-accessible | current | An entry will define how a login/enable from console or network will use which group of servers of either radius or tacacs. Each entry is uniquly identified by… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.5.1.1 | ColumnoacAAAAuthenticationFeature | read-create | current | A user can login to the device and just monitor. A user can configure the device when he enters the enabled mode. The device will challenge an user for authent… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.5.1.2 | ColumnoacAAAAuthenticationReqSrc | read-create | current | The user can access the device either thru the default mode or from the console or from the network like ssh and telnet. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.5.1.3 | ColumnoacAAAAuthenticationSvrType | read-create | current | The authentication servers can be either a group of radius serves or a group of tacacs servers or all radius servers or all tacacs server. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.5.1.4 | ColumnoacAAAAuthenticationServerRowStatus | read-create | current | The Row status for this entry. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.6 | TableoacAAAAuthenticationConfigBannerSeqTable | not-accessible | current | This table holds upto 40 banner messages used in authentication |
| 1.3.6.1.4.1.13191.10.3.4.10.1.6.1 | RowoacAAAAuthenticationConfigBannerSeqEntry | not-accessible | current | Each entry will hold one banner string |
| 1.3.6.1.4.1.13191.10.3.4.10.1.6.1.1 | ColumnoacAAAAuthenticationBannerSequence | read-create | current | The maximum number of strings that can be stored are 40. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.6.1.2 | ColumnoacAAAAuthenticationBannerString | read-create | current | banner test is a set of string maximum upto 255 characters. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.6.1.3 | ColumnoacAAAAuthenticationBannerSeqRowStatus | read-create | current | The row status of this entry |
| 1.3.6.1.4.1.13191.10.3.4.10.1.7 | TableoacAAAGroupServerConfigTable | not-accessible | current | Configuring AAA Group Servers: The cli command to configure a group of servers aaa group server { radius | tacacs } <group-name> server {<A.B.C.D>|<hostname> }… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.7.1 | RowoacAAAGroupServerConfigEntry | not-accessible | current | A group server entry will hold information about an configured radius or tacacs server to which group it belongs to. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.7.1.1 | ColumnoacAAAServerGroupName | read-create | current | The group name which is the index for each entry. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.7.1.2 | ColumnoacAAAServerGroupType | read-create | current | Only server of type defined above can be added to this group. all the servers can be either of type radius or type tacacs. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.7.1.3 | ColumnoacAAAServerGroupServerInfo | read-create | current | This object will hold the inforamtion about the server, which can be an IPv4 Address or an Hostname. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.7.1.4 | ColumnoacAAAServerGroupRowStatus | read-create | current | The row status for this entry. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.8 | ScalaroacAAAAuthorizationConfigCmdLevelDefTacacs | read-write | current | To enable AAA authorization for a given privilege level |
| 1.3.6.1.4.1.13191.10.3.4.10.1.9 | TableoacAAAAccCmdsConfigTable | not-accessible | current | This table provides the information for AAA accounting commands. SNMP table for the above command will be 1) access level of the command INTEGER 0-15 2) tacacs… |
| 1.3.6.1.4.1.13191.10.3.4.10.1.9.1 | RowoacAAAAccCmdsConfigEntry | not-accessible | current | each entry will define an access level and the tacacs group name. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.9.1.1 | ColumnoacAAAAccCmdAccessLevel | read-create | current | The command access level for which accounting has to be done. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.9.1.2 | ColumnoacAAAAccTacacsGroupName | read-create | current | The group of servers that can be used to perform accounting for a given command access level. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.9.1.3 | ColumnoacAAAAccCmdsRowStatus | read-create | current | The row status for this entry. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.10 | ScalaroacAAAAccConfigExecStartStop | read-write | current | Set EXEC accounting and the method is default, to use start-stop record accounting notice. Uses TACACS+ server for accounting. |
| 1.3.6.1.4.1.13191.10.3.4.10.1.11 | ScalaroacAAAAccConfigSystemStartStop | read-write | current | Set System accounting and the method is default, to use start-stop record accounting notice. Uses TACACS+ server for accounting. |
| 1.3.6.1.4.1.13191.10.3.4.10.2 | NodeoacAAAConfigConformance | |||
| 1.3.6.1.4.1.13191.10.3.4.10.2.1 | NodeoacAAAConfigGroups | |||
| 1.3.6.1.4.1.13191.10.3.4.10.2.1.1 | GroupoacAAAConfigGroup | current | Group of AAA objects | |
| 1.3.6.1.4.1.13191.10.3.4.10.2.2 | NodeoacAAACompls |