MIB Viewer

ONEACCESS-IPSEC-MIB

20 objects
Contact updated
Imported Objects
IF-MIBifIndex
ONEACCESS-GLOBAL-REGoacExpIMIp oacExpIMIPSec oacMIBModules
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCTimeInterval
OIDNameAccessStatusDescription
1.3.6.1.4.1.13191.1.100.675IdentityoacNatMIBModule381Contact updated
1.3.6.1.4.1.13191.10.3.1.4.1NodeoacIPSecNotifications
1.3.6.1.4.1.13191.10.3.1.4.1.1NotificationoacIPSecSAcreatedcurrentAn IPSec SA created notification signifies that the device created an IPSec security association.
1.3.6.1.4.1.13191.10.3.1.4.1.2NotificationoacIPSecSAremovedcurrentAn IPSec SA removed notification signifies that the device removed an IPSec security association.
1.3.6.1.4.1.13191.10.3.1.4.1.3NotificationoacIPSecCmapEnabledcurrentAn IPSec crypto map enabled notification signifies that the device validated the crypto map attached to an interface and the crypto map becomes valid on this i…
1.3.6.1.4.1.13191.10.3.1.4.1.4NotificationoacIPSecCmapDisabledcurrentAn IPSec crypto map disabled notification signifies that the device did not validate the crypto map attached to an interface and the crypto map becomes invalid…
1.3.6.1.4.1.13191.10.3.1.4.1.5NotificationoacIPSecCpolEnabledcurrentAn IPSec crypto map policy enabled notification signifies that the device validated the crypto map policy. configuration is considered as active and can be use…
1.3.6.1.4.1.13191.10.3.1.4.1.6NotificationoacIPSecCpolDisabledcurrentAn IPSec crypto map policy disabled notification signifies that the device did not validate the crypto map policy. Configuration is considered as inactive and …
1.3.6.1.4.1.13191.10.3.1.4.1.7NotificationoacIPSecHwModuleDowncurrentAn IPSec hardware module down notification signifies that the device can not use any hardware encryption module, because it is not activated, or it is not pres…
1.3.6.1.4.1.13191.10.3.1.4.2NodeoacIsakmpNotifications
1.3.6.1.4.1.13191.10.3.1.4.2.1NotificationoacISAKMPBadProposalcurrentAn ISAKMP bad proposal notification signifies that the device did not validate proposal for IPSec phase 1 with a remote peer.
1.3.6.1.4.1.13191.10.3.1.4.2.2NotificationoacISAKMPNoResponsecurrentAn ISAKMP No Response notification signifies that the device was exchanging ISAKMP information with a remote ISAKMP peer, and the peer did not give any answer …
1.3.6.1.4.1.13191.10.3.1.4.2.3NotificationoacISAKMPConnectionEstablishedcurrentAn ISAKMP Connection established notification signifies that the device established an ISAKMP connection with a remote ISAKMP device.
1.3.6.1.4.1.13191.10.3.1.4.2.4NotificationoacISAKMPConnectionRemovedcurrentAn ISAKMP Connection removed notification signifies that the device removed an ISAKMP connection with a remote ISAKMP device, because the lifetime of the conne…
1.3.6.1.4.1.13191.10.3.1.4.2.5NotificationoacISAMPIPSecConnectionEstablishedcurrentAn ISAKMP IPSec Connection established notification signifies that the ISAKMP daemon of the device successfully created an IPSec tunnel between two ISAKMP peer…
1.3.6.1.4.1.13191.10.3.1.4.2.6NotificationoacISAKMPIPSecConnectionRemovedcurrentAn ISAKMP IPSec Connection removed notification signifies that the ISAKMP daemon of the device removed an IPSec connection, either because the lifetime of the …
1.3.6.1.4.1.13191.10.3.1.4.2.7NotificationoacISAKMPUnknownPeercurrentAn ISAKMP unknown peer notification signifies that the device received an unknown isakmp request and did not process it.
1.3.6.1.4.1.13191.10.3.1.4.2.8NotificationoacISAKMPNotificationMsgReceivedcurrentAn ISAKMP notification message received notification signifies that the device received a notification from a known ISAKMP peer.
1.3.6.1.4.1.13191.10.3.1.4.2.9NotificationoacISAKMPNotificationMsgSentcurrentAn ISAKMP notification message sent notification signifies that the device sent a notification to a known ISAKMP peer. Generally, a sent notification is due to…
1.3.6.1.4.1.13191.10.3.1.4.2.10NotificationoacISAKMPDeadPeerDetectedcurrentAn ISAKMP Dead Peer detection signifies that the device detected a DPD when using ISAKMP keepalive.