ONEACCESS-JITTER-MIB
101 objects
Contact updated
Imported Objects
| IF-MIB | -- OwnerString |
| INET-ADDRESS-MIB | -- InetAddress |
| ONEACCESS-GLOBAL-REG | -- oacMIBModules oacExpIMManagement oacRequirements |
| SNMPv2-CONF | -- MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | -- RowStatus DateAndTime TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13191.1.100.2000 | IdentityoacJitterMIBModule | 381 | Contact updated | |
| 1.3.6.1.4.1.13191.5.2000 | NodeoacJitterConformance | |||
| 1.3.6.1.4.1.13191.5.2000.1 | NodeoacJitterGroups | |||
| 1.3.6.1.4.1.13191.5.2000.1.1 | GroupoacJitterGeneralGroup | current | This group is mandatory for Jitter entity. | |
| 1.3.6.1.4.1.13191.5.2000.2 | NodeoacJitterCompliances | |||
| 1.3.6.1.4.1.13191.5.2000.2.1 | ComplianceoacJitterCompliance | current | The compliance statement for agents that support the ONEACCESS-JITTER-MIB. | |
| 1.3.6.1.4.1.13191.10.3.4.5 | NodeoacExpIMJitter | |||
| 1.3.6.1.4.1.13191.10.3.4.5.1 | NodeoacJitterObjects | |||
| 1.3.6.1.4.1.13191.10.3.4.5.1.1 | TableoacJitterControlTable | not-accessible | current | Config Table for JITTER probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1 | RowoacJitterControlEntry | not-accessible | current | List of objects defining a conceptual JITTER probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.1 | ColumnoacJitterControlIndex | not-accessible | current | Identifies a row (session number) in the control table. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.2 | ColumnoacJitterControlOwner | read-create | current | Use as a comment field. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.3 | ColumnoacJitterControlType | read-create | current | Specifies the protocol used by the probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.4 | ColumnoacJitterControlFrequency | read-create | current | Defines the time in seconds between two probes. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.5 | ColumnoacJitterControlTimeout | read-create | current | Defines the maximum time of waiting a response to a packet. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.6 | ColumnoacJitterControlTargetAddress | read-create | current | Specifies the IP address of the target. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.7 | ColumnoacJitterControlTargetPort | read-create | current | Specifies the port number of the target. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.8 | ColumnoacJitterControlSourceAddress | read-create | current | Specifies the source IP address. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.9 | ColumnoacJitterControlInterval | read-create | current | Time interval between each packet of a probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.10 | ColumnoacJitterControlPktDataRequestSize | read-create | current | Specifies the size of the packet to send. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.11 | ColumnoacJitterControlPacketCount | read-create | current | Number of packets to send for a probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.12 | ColumnoacJitterControlTos | read-create | current | This object represents the type of service in an IP header. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.13 | ColumnoacJitterControlStatus | read-create | current | The status of the jitter probe (see definition from SNMPv2-TC module). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.1.1.14 | ColumnoacJitterControlVrfName | read-write | current | VRF name |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2 | TableoacJitterStatsTable | not-accessible | current | Statistics Table for JITTER probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1 | RowoacJitterStatsEntry | not-accessible | current | List of objects defining the results for JITTER probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.2 | ColumnoacJitterStatsCompleted | read-only | current | The status of the last measure. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.3 | ColumnoacJitterStatsTime | read-only | current | The date of the last measure. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.4 | ColumnoacJitterStatsNumRTT | read-only | current | The total number of probe operations that have been done. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.5 | ColumnoacJitterStatsPacketRecv | read-only | current | The number of received packets during a probe test. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.6 | ColumnoacJitterStatsAvgRTT | read-only | current | The average value of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.7 | ColumnoacJitterStatsSumRTT | read-only | current | The sum of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.8 | ColumnoacJitterStatsMinRTT | read-only | current | The minimum value of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.9 | ColumnoacJitterStatsMaxRTT | read-only | current | The maximum value of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.10 | ColumnoacJitterStatsSumPosJitter | read-only | current | The sum of positive jitter measures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.11 | ColumnoacJitterStatsNumPosJitter | read-only | current | The number of positive jitter measures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.12 | ColumnoacJitterStatsSumNegJitter | read-only | current | The sum of negative jitter measures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.13 | ColumnoacJitterStatsNumNegJitter | read-only | current | The number of negative jitter mesures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.14 | ColumnoacJitterStatsSumPosSD | read-only | current | The sum of positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.15 | ColumnoacJitterStatsNumPosSD | read-only | current | The number of positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.16 | ColumnoacJitterStatsSumNegSD | read-only | current | The sum of negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.17 | ColumnoacJitterStatsNumNegSD | read-only | current | The number of negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.18 | ColumnoacJitterStatsSumPosDS | read-only | current | The sum of positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.19 | ColumnoacJitterStatsNumPosDS | read-only | current | The number of positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.20 | ColumnoacJitterStatsSumNegDS | read-only | current | The sum of negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.21 | ColumnoacJitterStatsNumNegDS | read-only | current | The number of negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.22 | ColumnoacJitterStatsPacketLossSD | read-only | current | The number of packets lost when sent from source to target. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.23 | ColumnoacJitterStatsPacketLossDS | read-only | current | The number of packets lost when sent from target to source. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.24 | ColumnoacJitterStatsPacketOutOfSequence | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.25 | ColumnoacJitterStatsPacketLateArrival | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.26 | ColumnoacJitterStatsPacketLoss | read-only | current | The number of packets that are lost for which we cannot determine the direction. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.27 | ColumnoacJitterStatsMaxPosSD | read-only | current | The maximum measure of positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.28 | ColumnoacJitterStatsMaxNegSD | read-only | current | The maximum measure of negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.29 | ColumnoacJitterStatsMaxPosDS | read-only | current | The maximum measure of positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.30 | ColumnoacJitterStatsMaxNegDS | read-only | current | The maximum measure of negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.31 | ColumnoacJitterStatsSum2PosSD | read-only | current | The sum of squared positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.32 | ColumnoacJitterStatsSum2NegSD | read-only | current | The sum of squared negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.33 | ColumnoacJitterStatsSum2PosDS | read-only | current | The sum of squared positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.34 | ColumnoacJitterStatsSum2NegDS | read-only | current | The sum of squared negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.35 | ColumnoacJitterStatsDeviationSD | read-only | current | Standard jitter measures deviation (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.2.1.36 | ColumnoacJitterStatsDeviationDS | read-only | current | Standard jitter measures deviation (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3 | TableoacJitterStatsHistoryTable | not-accessible | current | Statistics History Table for JITTER probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1 | RowoacJitterStatsHistoryEntry | not-accessible | current | List of objects defining the history results for JITTER probe. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.1 | ColumnoacJitterStatsHistoryIndex | read-only | current | The index of the entry. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.2 | ColumnoacJitterStatsHistoryCompleted | read-only | current | The status of the last measure. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.3 | ColumnoacJitterStatsHistoryTime | read-only | current | The date of the last measure. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.4 | ColumnoacJitterStatsHistoryNumRTT | read-only | current | The total number of probe operations that have been done. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.5 | ColumnoacJitterStatsHistoryPacketRecv | read-only | current | The number of received packets during a probe test. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.6 | ColumnoacJitterStatsHistoryAvgRTT | read-only | current | The average value of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.7 | ColumnoacJitterStatsHistorySumRTT | read-only | current | The sum of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.8 | ColumnoacJitterStatsHistoryMinRTT | read-only | current | The minimum value of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.9 | ColumnoacJitterStatsHistoryMaxRTT | read-only | current | The maximum value of the Round Trip Time measures. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.10 | ColumnoacJitterStatsHistorySumPosJitter | read-only | current | The sum of positive jitter measures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.11 | ColumnoacJitterStatsHistoryNumPosJitter | read-only | current | The number of positive jitter measures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.12 | ColumnoacJitterStatsHistorySumNegJitter | read-only | current | The sum of negative jitter measures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.13 | ColumnoacJitterStatsHistoryNumNegJitter | read-only | current | The number of negative jitter mesures (Source <-> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.14 | ColumnoacJitterStatsHistorySumPosSD | read-only | current | The sum of positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.15 | ColumnoacJitterStatsHistoryNumPosSD | read-only | current | The number of positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.16 | ColumnoacJitterStatsHistorySumNegSD | read-only | current | The sum of negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.17 | ColumnoacJitterStatsHistoryNumNegSD | read-only | current | The number of negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.18 | ColumnoacJitterStatsHistorySumPosDS | read-only | current | The sum of positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.19 | ColumnoacJitterStatsHistoryNumPosDS | read-only | current | The number of positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.20 | ColumnoacJitterStatsHistorySumNegDS | read-only | current | The sum of negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.21 | ColumnoacJitterStatsHistoryNumNegDS | read-only | current | The number of negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.22 | ColumnoacJitterStatsHistoryPacketLossSD | read-only | current | The number of packets lost when sent from source to target. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.23 | ColumnoacJitterStatsHistoryPacketLossDS | read-only | current | The number of packets lost when sent from target to source. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.24 | ColumnoacJitterStatsHistoryPacketOutOfSequence | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.25 | ColumnoacJitterStatsHistoryPacketLateArrival | read-only | current | The number of packets that arrived after the timeout. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.26 | ColumnoacJitterStatsHistoryPacketLoss | read-only | current | The number of packets that are lost for which we cannot determine the direction. |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.27 | ColumnoacJitterStatsHistoryMaxPosSD | read-only | current | The maximum measure of positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.28 | ColumnoacJitterStatsHistoryMaxNegSD | read-only | current | The maximum measure of negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.29 | ColumnoacJitterStatsHistoryMaxPosDS | read-only | current | The maximum measure of positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.30 | ColumnoacJitterStatsHistoryMaxNegDS | read-only | current | The maximum measure of negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.31 | ColumnoacJitterStatsHistorySum2PosSD | read-only | current | The sum of squared positive jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.32 | ColumnoacJitterStatsHistorySum2NegSD | read-only | current | The sum of squared negative jitter measures (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.33 | ColumnoacJitterStatsHistorySum2PosDS | read-only | current | The sum of squared positive jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.34 | ColumnoacJitterStatsHistorySum2NegDS | read-only | current | The sum of squared negative jitter measures (Source <- Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.35 | ColumnoacJitterStatsHistoryDeviationSD | read-only | current | Standard jitter measures deviation (Source -> Target). |
| 1.3.6.1.4.1.13191.10.3.4.5.1.3.1.36 | ColumnoacJitterStatsHistoryDeviationDS | read-only | current | Standard jitter measures deviation (Source <- Target). |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OacJitterControlJitterType | INTEGER { jitter-ICMP-TIMESTAMP(1), jitter-UDP-PING(2), jitter-UDP-PING-TIMESTAMP(3) } | current | Describes the type of probe to execute. |
| OacJitterResponseSense | INTEGER { ok(1), disconnected(2), overThreshold(3), timeout(4), busy(5), notConnected(6), dropped(7), sequenceError(8), verifyError(9), applicationSpecific(10), noStatisticsAvailable(11), error(16) } | current | Values for status of the operation. |