MIB Viewer

ONEACCESS-OAM-MIB

56 objects
Contact updated
Imported Objects
ATM-MIBatmVclEntry
IF-MIBifIndex InterfaceIndex
ONEACCESS-GLOBAL-REGoacExpIMAtmOamStatistics oacMIBModules
RFC1213-MIBDisplayString
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCTimeInterval TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.4.1.13191.1.100.673IdentityoacOamMIBModule381Contact updated
1.3.6.1.4.1.13191.10.3.2.2.1NodeoacAtmOamStatObjects
1.3.6.1.4.1.13191.10.3.2.2.1.1NodeoacAtmOamStatSwitch
1.3.6.1.4.1.13191.10.3.2.2.1.1.1ScalaroacAtmOamSwitchMaxConnectionsread-onlycurrentMaximum number of authorised OAM configured connections
1.3.6.1.4.1.13191.10.3.2.2.1.1.2ScalaroacAtmOamSwitchSegLoopbackread-onlycurrentEnable segment loopback on this switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.3ScalaroacAtmOamSwitchEndLoopbackread-onlycurrentEnable end to end loopback on this switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.4ScalaroacAtmOamSwitchAisRdiEnableread-onlycurrentEnable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received, or if a defect is detected on the switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.5ScalaroacAtmOamSwitchSegmentContinuityCheckEnableread-onlycurrentEnable Segment Loss of Continuity cells defect on the pvc. Enable generation of segment Continuity Check cells on the switch.
1.3.6.1.4.1.13191.10.3.2.2.1.1.6ScalaroacAtmOamSwitchEndContinuityCheckEnableread-onlycurrentEnable End to End Loss of Continuity cells defect on the pvc. Enable generation of End to End Continuity Check cells on the switch.
1.3.6.1.4.1.13191.10.3.2.2.1.1.7ScalaroacAtmOamSwitchOamCellsReceivedread-onlycurrentNumber of received OAM cells on the switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.8ScalaroacAtmOamSwitchOamCellsTransmittedread-onlycurrentNumber of transmitted OAM cells on the switch
1.3.6.1.4.1.13191.10.3.2.2.1.1.9ScalaroacAtmOamSwitchCurrentConnectionsread-onlycurrentCurrent number of OAM configured connections
1.3.6.1.4.1.13191.10.3.2.2.1.2TableoacAtmOamVclTablenot-accessiblecurrentAn index into the table oacAtmOamVclTable
1.3.6.1.4.1.13191.10.3.2.2.1.2.1RowoacAtmOamVclEntrynot-accessiblecurrentAn index into the table oacAtmOamVclTable
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.1ColumnoacAtmOamVclPvcManageread-onlycurrentEnable OAM for Pvc management
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.2ColumnoacAtmOamVclSegmentLoopbackread-onlycurrentEnable segment loopback on this virtual channel
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.3ColumnoacAtmOamVclEndLoopbackread-onlycurrentEnable end to end loopback on this virtual channel
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.4ColumnoacAtmOamVclAisRdiEnableread-onlycurrentEnable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received, or if a defect is detected on the PVC
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.5ColumnoacAtmOamVclSegmentContinuityCheckEnableread-onlycurrentEnable Segment Loss of Continuity cells detect on the PVC.Enable generation of Segment Continuity Check cells on the PVC.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.6ColumnoacAtmOamVclEndContinuityCheckEnableread-onlycurrentEnable End to End Loss of Continuity cells detect on the PVC.Enable generation of End to End Continuity Check cells on the PVC.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.7ColumnoacAtmOamVclLoopbackTxIntervalread-onlycurrentFrequency of OAM loopback cell are generated on this virtual channel
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.8ColumnoacAtmOamVclLoopbackTxRetryFrequencyread-onlycurrentFrequency of OAM loopback cell are generated on this virtual channel, when a change has occured, that is to say either no reception of the last loopback cell, …
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.9ColumnoacAtmOamVclLoopbackTxRetryUpCountread-onlycurrentCounter of consecutive received loopback cells, before vcl is considered as being up
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.10ColumnoacAtmOamVclLoopbackTxRetryDownCountread-onlycurrentCounter of consecutive non received loopback cells, before vcl is considered as being down
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.11ColumnoacAtmOamVclAlarmStateread-onlycurrentThis object indicates the current alarm status of the VCL, when error monitoring is activated on the VCL. Value indicates the different alarm states tha the VC…
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.12ColumnoacAtmOamVclAlarmStateLastChangeread-onlycurrentThe value of sysUpTime object at the time this VCL entered its current alarm status. If the current state was entered prior to the last re-initialization of th…
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.13ColumnoacAtmOamVclAisRdiRetryDownCountread-onlycurrentNumber of consecutive OAM AIS/RDI cells received. The range is 3 to 60. The default is 3.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.14ColumnoacAtmOamVclAisRdiRetryUpTimerread-onlycurrentNumber of seconds with no OAM AIS/RDI cells received. The range is 3 to 60 seconds . The default is 3 seconds.
1.3.6.1.4.1.13191.10.3.2.2.1.2.1.15ColumnoacAtmOamVclPvcIntrusiveread-onlycurrentEnable OAM Intrusivity against Pvc
1.3.6.1.4.1.13191.10.3.2.2.1.3TableoacAtmOamVclCountersTablenot-accessiblecurrentAn index into table oacAtmOamVclCountersTable
1.3.6.1.4.1.13191.10.3.2.2.1.3.1RowoacAtmOamVclCountersEntrynot-accessiblecurrentAn index into table oacAtmOamVclCountersTable
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.1ColumnoacAtmOamVclOamCellsReceivedread-onlycurrentNumber of received oam cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.2ColumnoacAtmOamVclEndLoopbackInread-onlycurrentNumber of received non looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.3ColumnoacAtmOamVclSegLoopbackInread-onlycurrentNumber of received non looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.4ColumnoacAtmOamVclEndLoopInread-onlycurrentNumber of received looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.5ColumnoacAtmOamVclSegLoopInread-onlycurrentNumber of received looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.6ColumnoacAtmOamVclAisInread-onlycurrentNumber of received oam ais cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.7ColumnoacAtmOamVclRdiInread-onlycurrentNumber of received oam rdi cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.8ColumnoacAtmOamVclSegCCInread-onlycurrentNumber of received oam end to end continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.9ColumnoacAtmOamVclEndCCInread-onlycurrentNumber of received oam segment continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.10ColumnoacAtmOamVclOamCellsSentread-onlycurrentNumber of sent oam cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.11ColumnoacAtmOamVclEndLoopbackOutread-onlycurrentNumber of sent non looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.12ColumnoacAtmOamVclSegLoopbackOutread-onlycurrentNumber of sent non looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.13ColumnoacAtmOamVclEndLoopOutread-onlycurrentNumber of sent looped end to end oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.14ColumnoacAtmOamVclSegLoopOutread-onlycurrentNumber of sent looped segment oam loopback cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.15ColumnoacAtmOamVclAisOutread-onlycurrentNumber of sent oam ais cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.16ColumnoacAtmOamVclRdiOutread-onlycurrentNumber of sent oam rdi cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.17ColumnoacAtmOamVclSegCCOutread-onlycurrentNumber of sent oam end to end continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.18ColumnoacAtmOamVclEndCCOutread-onlycurrentNumber of sent oam segment continuity check cells
1.3.6.1.4.1.13191.10.3.2.2.1.3.1.19ColumnoacAtmOamVclOamCellsDroppedread-onlycurrentNumber of received oam cells that are ignored and dropped
1.3.6.1.4.1.13191.10.3.2.2.2NodeoacAtmOamStatNotifications
1.3.6.1.4.1.13191.10.3.2.2.3NodeoacAtmOamStatConformance
1.3.6.1.4.1.13191.10.3.2.2.3.1NodeoacAtmOamStatGroups
1.3.6.1.4.1.13191.10.3.2.2.3.1.1GroupoacAtmOamStatGeneralGroupcurrentThis group is mandatory for all OAM entities.
1.3.6.1.4.1.13191.10.3.2.2.3.2NodeoacAtmOamStatCompliances
1.3.6.1.4.1.13191.10.3.2.2.3.2.1ComplianceoacAtmOamStatCompliancecurrentThe compliance statement for agents that support the ONEACCESS-OAM-MIB.
MIB Viewer